Answer:
60 cm³ of water
Explanation:
We'll begin by calculating the volume of the diluted solution. This can be obtained as follow:
Concentration of stock solution (C₁) = 17 M
Volume of stock solution (V₁) = 25 cm³
Concentration of diluted solution (C₂) = 5 M
Volume of diluted solution (V₂) =?
C₁V₁ = C₂V₂
17 × 25 = 5 × V₂
425 = 5 × V₂
Divide both side by 5
V₂ = 425 / 5
V₂ = 85 cm³
Thus, the volume of the diluted solution is 85 cm³
Finally, we shall determine the volume of water needed to dilute the solution. This can be obtained as follow:
Volume of stock solution (V₁) = 25 cm³
Volume of diluted solution (V₂) = 85 cm³
Volume of water =?
Volume of water = V₂ – V₁
Volume of water = 85 – 25
Volume of water = 60 cm³
Therefore, 60 cm³ of water is needed to dilute the solution.
Which of the following elements is the smallest?
Explanation:
where is options?????????????????
what is the name of the organic molecule
Explanation:
Although carbon is present in all organic compounds, other elements such as hydrogen ( H), oxygen ( O), nitrogen ( N), sulfur ( S) and phosphorus ( P) are also common in these molecules. An organic molecule is a molecule that contains carbon atoms (generally bonded to other carbon atoms as well as hydrogen atoms)
How does a cirrus cloud look like
1) cotton
2) thin feather
Answer:
2) thin feather
Explanation:
Cirrus clouds are delicate, feathery clouds that are made mostly of ice crystals. Their wispy shape comes from wind currents which twist and spread the ice crystals into strands.
hope it helps :)
please mark brainliest!!!
which of the following is a physical change? 1.burning paper 2.grinding wheat 3.electrolysis of water 4.cooking rice
Answer:
2 grinding of wheat is just a physical change
plz brainlist
High-pressure liquid chromatography (HPLC) is a method used in chemistry and biochemistry to
purify chemical substances. The pressures used in this procedure range from around 500
kilopascals (500,000 Pa) to about 60,000 kPa (60,000,000 Pa). It is often convenient to know
the pressure in torr. If an HPLC procedure is running at a pressure of 3.20x10^8 Pa , what is its
running pressure in torr?
Express the pressure numerically in torr.
►
3.20 x 10^8 Pa = _____ torr
Answer:
2,400,000 torr (3 s.f.)
Explanation:
Convert the pressure from Pascal to atm first:
[tex]\boxed{1 \: atm = 101325 \:Pa }[/tex]
3.20 ×10⁸ Pa
= [(3.20 ×10⁸) ÷101325] atm
= 3158.2 atm (5 s.f.)
Convert atm to torr:
[tex]\boxed{1 \: atm = 760 \: torr}[/tex]
3158.2 atm
= (3158.2 ×760) torr
= 2400000 torr (3 s.f.)
Select the structure corresponding to trans-3-octene.
Answer: B
Explanation:
Answer:
The Correct Answer Is B.
. De las siguientes soluciones:
1. 20 ml de alcohol etílico mezcladas con 80 ml de agua.
2. 500 ml de agua con 20 g de sal disueltas (V Sln: 500ml).
3. 80 g de sal en 2 litros de agua.
a) Identifica el soluto y solvente de cada solución y explica ¿por qué?
b) Encuentra la concentración por peso de la solución número 3 c) Entre la disolución 2 y 3 ¿Cuál presenta mayor concentración?
por favor lo necesito para hoy ¡gracias!
Answer:
can u translate this to English? I might be able to help
a) Solution 1: Solute is ethyl alcohol, solvent is water. Solution 2 and 3: Solute is salt, solvent is water.
b) Concentration by weight of solution 3: Approximately 3.85%.
c) Solution 3 has a higher concentration than solution 2.
a) Solutions and their solutes and solvents:
Solution 1: The solute is ethyl alcohol, and the solvent is water. This is because ethyl alcohol is the substance that dissolves in water to form the solution.
Solution 2: The solute is salt, and the solvent is water. Salt is the substance that dissolves in water to form the solution.
Solution 3: The solute is salt, and the solvent is water. Similar to solution 2, salt is the substance that dissolves in water to form the solution.
b) Weight concentration of solution number 3:
The weight concentration is calculated by dividing the mass of the solute (80 g of salt) by the total mass of the solution (80 g of salt + 2000 g of water):
Weight concentration = (80 g / 2080 g) * 100% ≈ 3.85%
c) Comparison of concentrations between solution 2 and 3:
Solution number 3 has a higher concentration than solution 2, as the weight concentration of solution 3 is approximately 3.85%, while the exact amount of water is not provided for solution 2 to calculate its concentration. However, solution 2 contains only 20 g of salt dissolved in 500 ml of water, which implies that the concentration will be lower than solution 3. Therefore, solution number 3 has a higher concentration compared to solution 2.
To learn more about Solutions, here
https://brainly.com/question/30665317
#SPJ2
What is the boiling point of water?
Answer:
212°F , 100°C , 373.15°K
They are all the same, in different units.
Answer:
The boiling point of water is 212 degrees fahrenheit, and/or 100 degrees celsius.
Please help me with my work
Answer:
2
Explanation:
There's 2 Hydrogen and Chlorine molecules on the right side with one Zinc. So the left side needs to have a coefficient of 2 on the hydrochloric acid, or HCl.
please help with the attached picture question 21, 22, 23
Explanation:
21. The given molecule for cracking is tetradecane.
On cracking it forms one mole of decane (C10H22) and two moles of ethene gas.
The chemical equation is shown below:
[tex]C_1_4H_3_0->C_1_0H_2_2+2C_2H_4[/tex]
22. The essential condition for the formation of an ester is the reaction of alcohol and acid in presence of concentrated sulfuric acid.
Thus among the given options, the first option is the correct one.
23. Isomers of butanol are shown below:
It is 2-butanol.
The position of -OH group changes to the second carbon.
What is the difference between an exothermic and an endothermic reaction?
A. Endothermic reactions absorb heat.
B. Exothermic reactions absorb heat.
C. There are no changes in heat during either reaction.
D. Endothermic reactions release heat.
answer D
Explanation:hope thhis helped
Re-word this statement: Ionic Radii are changing as you move down the column because the atoms in lower rows have more energy levels, which makes the valence electrons farther from the nucleus, so it takes less energy for them to be pulled away.
The Ionic radii are changing as you move across a row because each element has one more proton, which increases the attraction of the nucleus.
Answer:
ty po hehe
Explanation:
mark me as brainliest po thank you
Suppose that three isotopes of element X occur in nature as follows:
The relative atomic mass of the naturally occurring mixture of element X is
Answer:
107.5 amu
Explanation:
isotopes: fractional Wt Avg
isotopes: isotopic mass %Abundance abundance (amu)
X110 110 60 0.60 66.0
X105 105 30 0.30 31.5
X100 100 10 0.10 10.0
∑ atm mass contributions = 107.5 amu*
*amu = atomic mass units
What happens to a glass of sugar solution when sugar is added to it?
The number of moles of water increases.
The number of moles of water decreases.
The molarity of the solution increases.
The molarity of the solution decreases.
When sugar is added to a glass of sugar solution, the molarity of the solution increases. Details about molarity can be found below, which is the third option.
What is molarity?Molarity is a term used to identify the amount of solute, in moles, dissolved in a solvent by volume. Molarity is expressed as moles per liter (mol/L).
However, molarity is directly proportional to the amount of solute in solution. This means that as the amount of solute increases, molarity also increases.
Therefore, when sugar is added to a glass of sugar solution, the molarity of the solution increases.
Learn more about molarity at: https://brainly.com/question/2817451
#SPJ1
Describe weighted average
Answer:
Explained below
Explanation:
In simple average, we just add all the given data variables and divide it by the number of data given.
However, when it comes to weighted average, what we do is that we multiply each given variable by their weights and then divide the sum of that by the sum of the weights.
Thus, if the variables are denoted by x and their weights are denoted by y, then we have;
Weighted average = Σ(xy)/Σy
Balance the following equations by inserting the proper coefficients.
The question is incomplete, the complete question is;
Balance the following equations by inserting the proper coefficients.
CH4 + O2 ---------------> CO2 +H2O
CaCl2 + AgNO3 ----->Ca(NO3)2 +AgCl
C2H6O + O2----------->CO2 +H2O
Answer:
CH4 + 2O2 ---------------> CO2 +2H2O
2AgNO3 + CaCl2 → Ca(NO3)2 + 2AgCl
C2H6O + 3O2 → 2CO2 + 3H2O
Explanation:
You see, when we set out to balance chemical reaction equations, ultimately, our aim is to ensure that the number of atoms of each element on the reactant side is exactly the same as the number of atoms of the same element on the products side.
We do this by counting the number of atoms required to have a balanced reaction equation and then adding coefficients in order to have a balanced chemical reaction equation.
This is what have been done in balancing the three reaction equations shown in the answer section.
its not a question but i wanted to tell you guys that if you guyz like my answers then please don't forget to give like and follow at the same time. I am not forcing you to follow only if you guyz like my answer then like or follow. THANKS FOR READING..
Answer:
thank you for this oibnki
Answer:
Sure I'll go ahead and like your answers and follow you if that's what you wanted! :)
Explanation:
what do you mean by 1 joule work
Answer:
Joule is the SI unit of work. 1 Joule is amount of work done when a force of 1 Newton displaces a body through a distance of 1m in the direction of the force applied.
Which of the following is not a pure form of a substance ?
A.Element
B.Atom
C.Molecule
D.Mixture
E.Compound
Answer:
Which of the following is not a pure form of a substance ?
C.mixture
Explanation:
since mixture is created due to one or more than two element,compound,molecule or atom.
Answer:
option D . mixture.
Explanation:
Mixture is not a pure form of a substance .
it is formed when two particles mixed together in one substance
Hope it is helpful to you ❣️✌️☺️☪️❣️
Fe2O3 +3CO--2Fe+3CO2 .identify the substance oxidized ,reduced and oxidizing agent and reducing agent
Answer:
Oxidized : CO
Reduced: Fe
Oxidizing agent: Fe2O3
Reducing agent: CO
Explanation:
Loss of electrons is oxidation while gaining of electrons is reduction.
CO is a reducing agent, Fe2O3 is an oxidizing agent.
Each carbon atom is oxidized in CO. CO is the reducing agent
Each Fe atom in FeO3 is reduced. FeO3 is the oxidizing agent
mention two factors which affect pressure due to liquid contained in a vessel
Answer:
depth of the liquid and nature of liquid affects the pressure due to liquid contained in a vessel
Answer:
Two factors influence the pressure of fluids. They are the depth of the fluid and its density. A fluid exerts more pressure at greater depths
Plz Help I have One more time To retake and I can't fail it..
Answer:
B. Radar uses radio and the siren uses sound waves. both exhibit in the Doppler effect.
sorry if this is wrong
How many liters of carbon dioxide can be “scrubbed”, or removed, with 3.45 Liters of 0.10 M of lithium hydroxide solution?
Answer:
The correct answer is - 3.864 L of CO2.
Explanation:
A mixture of reactants and products for the reaction shown below is at equilibrium in a 5.0 L container what would most likely happen to the equilibrium if the volume of the container will reduced to 3.0 L?
Since the volume decreased, it means that the pressure is going to rise. Thus, the equilibrium of the reaction will shift in the direction that has the least amount of moles.
The statement, that describes the equilibrium "will change in the direction with the minimum moles."
What is an equilibrium?A condition of equilibrium has become one of balance. Chemical equilibrium is the state in which both the reactants and products are present in concentrations that have no further tendency to change with time, resulting in no observable change in the system's properties.
When volume decreases, the equilibrium shifts to favor the direction that produces fewer moles of gas. When the volume is raised, the equilibrium shifts in favor of the direction that produces the most moles of gas. Because the container's volume will be lowered from 5.0 L to 3.0 L, the pressure will rise. As a result, the equilibrium of the reaction will shift in the direction with the fewest moles. When the volume is reduced, the pressure rises. This demonstrates that a gas's pressure is inversely proportional to its volume.
Hence the correct answer is equilibrium will change in the direction with the minimum moles.
Learn more about equilibrium here
https://brainly.com/question/13463225
#SPJ2
Calculate the molar mass of the following compound: Ca3P2
Answer:
The molar mass of the compound given is 182.182 g/mol.
Explanation:
To calculate the molar mass of the compound, we must multiply the number of moles of each element by the the individual molar mass of each element and add them together.
Let's start with Calcium. The molar mass of Calcium is 40.078. In this compound, we have three moles of Calcium, so we should multiply this number by 3.
40.078 g/mol * 3 mol = 120.234 g
Now, let's do the same for Phosphorus.
30.974 g/mol * 2 g/mol = 61.948 g
To find the molar mass of the entire compound, we should add these two values together.
120.234 g + 61.948 g = 182.182 g
Therefore, the correct answer is 182.182 g/mol.
Hope this helps!
I. En un laboratorio se hizo reaccionar una disolución de ácido sulfúrico (H2SO4) con otra de hidróxido de sodio (NaOH), ambos acuosos. Para formar sulfato de sodio (Na2SO4) y 2 moléculas de agua (H2O) líquido. Completa en relación con la ecuación química que representa la reacción:
Answer:
In a laboratory, a solution of sulfuric acid (H2SO4) was reacted with another of sodium hydroxide (NaOH), both aqueous. To form sodium sulfate (Na2SO4) and 2 molecules of liquid water (H2O). Complete in relation to the chemical equation that represents the reaction:
Explanation:
The balanced chemical equation of the reaction is:
[tex]H_2SO_4(aq)+2NaOH(aq)-> Na_2SO_4(aq)+2H_2O(l)[/tex]
Thus, one mole of sulfuric acid reacts with two moles of sodium hydroxide.
what is the organic molecule
Answer:
kinetic energy is the molecules
Explanation:
A molecule of the kind normally found in living systems. Organic molecules are usually composed of carbon atoms in rings or long chains, to which are attached other atoms of such elements as hydrogen, oxygen, and nitrogen.
Element X and Y are two different elements that are placed in the same group in the Periodic Table of Elements. Which of the following statements is correct about their atoms?
A Atoms of element X and Y have same number of electrons
B Atoms of element X and Y have different number of protons
C Number of neutrons for atom X and Y changes during formation of an ion
D Nucleon number for atom X and Y is the total number of protons and electrons
Answer:
A Atoms of element X and Y have same number of electrons
Which of the following would allow you to find the volume of an irregular shaped solid object?
a: triple beam balance
b: l × b × h
c: water displacement
d: hight × length × width
Answer:
water displacement
that is c
what is a measureing tape used for
Answer:
It is used to measure size or distance.
Answer:
it is used to measure long heights and distances and lengths,it is yellow and goes round
Explanation:
