Answer: basic
Explanation:
I just answered it on acellus it's correct ;)
A solution of the ionic salt CaSO₃ would have basic pH as on reaction with base it gives an acid.
What is an acid?
Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste. Compounds HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/29796621
#SPJ3
Give 264.2g of (NH4)2SO4, calculate the
a) amount of (NH4)2SO4
b) number of ions
c) number of atoms
d) number of H atoms
e) number of N atoms
With workings please! Thanks so much!
Answer:
D.
Explanation:
Thank me later
#modulepamoreitsreallyhurts
#modulelangsakalam
#moduleisreallyhurts
A molecule has four bonded atoms around a central atom. The central atom does not have any lone pairs of electrons. What is the geometry of the molecule?
Answer:
Tetrahedral. Tetra- signifies four, and -hedral relates to a face of a solid; “tetrahedral” literally means “having four faces. ” This shape is found when there are four bonds all on one central atom, with no lone electron pairs. In accordance with the VSEPR theory, the bond angles between the electron bonds are 109.5o ...
There are two characteristics of molecules, one is geometry and other is shape. Shape is excluding lone pair surrounding the central element and geometry is including the lone pair. Therefore, the geometry of given molecule is tetrahedral.
What is VSEPR theory?
VSEPR stands for valence shell electron pair repulsions. VSEPR theory is used to predict the shape and geometry of molecules on the basis of valence electrons pairs that are present around the central element of the molecule.
According to VSEPR theory, Lone pair lone pair repulsion is greater than bond pair bond pair repulsion. There are so many limitations of VSEPR theory. There is a repulsion between bond pair electrons and lone pairs present on the central element.
A molecule has four bonded atoms around a central atom. The central atom does not have any lone pairs of electrons. The geometry of such molecule is Tetrahedral. Geometry does not include lone pair on central atom.
Therefore, the geometry of given molecule is tetrahedral.
To know more about VSEPR theory, here:
https://brainly.com/question/19582124
#SPJ6
Rob measures the solubility of three different salts in water at 22°C.
Which type of graph should he use to display his data?
Answer:
He should use a bar graph
Explanation:
Since this is a distinction between three very distinct categories a bar graph should be perfect
How does an indicator show the difference between an acid and an alkali?
Answer: There are various indicators like litmus paper, phenolphthalein, universal indicator etc. that changes its colour to show the difference between acid and alkali.
Thompson's experiments with cathode ray tube lead to the invention of what?
Answer:
Thompson's experiments with cathode ray tube showed that every atom contains a small amount of negatively charged subatomic particles. Thomson proposed the plum pudding model of the atom.
Explanation:
A properly designed experiments changes one variable at a time. A student wanted to know which type of sugar would yield the greatest amount of energy for the cell when metabolized during cellular respiration by mitochondria. The student mixed yeasts in three different sugar solutions: maltose, glucose, sucrose. The three sets of yeasts were monitored to determine which sugar type yielded the most energy. List three factors that the student must keep constant during the experiment
Answer:
The amount of water
The amount of sugar and
The amount of yeast
Explanation:
A constant variable is that variable in an experiment which must be kept the same for all groups in order not to alter the results of the experiment.
In this question, the independent variable i.e. the variable being manipulated is the TYPE OF SUGAR USED while the dependent variable i.e. variable that responds to change is AMOUNT OF ENERGY. Three different types of sugar were used viz: maltose, glucose, and sucrose. To not alter the outcome of the experiment, the constants of this experiment i.e. variables that must be the same for all groups of the experiment, include the following:
- The amount of water
- The amount of sugar
- The amount of yeast used
A student wants to make a 0.600 M aqueous solution of barium sulfate, BaSO4, and has a bottle containing 12.00 g of barium sulfate. What should be the final volume of the solution?
Find the numerical answer for this question and make sure to include the following:
What is the formula for molarity?
What is the molar mass for barium sulfate?
When you give your numerical answer, what are the correct significant figures and how do you know that is the correct amount?
Need this ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer: The volume of the solution is 85.7 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
We are given:
Molarity of solution = 0.600 M
Given mass of [tex]BaSO_4[/tex] = 12.00 g
We know, molar mass of [tex]BaSO_4=[(1\times 137.33)+(1\times 32.07)+(4\times 16)]=233.4g/mol[/tex]
Putting values in equation 1, we get:
[tex]0.600=\frac{12.00\times 1000}{233.4\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{12.00\times 1000}{233.4\times 0.600}=85.68mL=85.7mL[/tex]
The rule of significant number that is applied for the problems having multiplication and division:
The least number of significant figures in any number of the problem determines the number of significant figures in the answer.
Here, the least number of significant figures is 3 that is determined by the number, 0.600. Thus, the answer must have these many significant figures only.
Hence, the volume of the solution is 85.7 mL
In what way are electrons quantized?
O A. They have fixed energy values.
they
OB. They can be gained and lost.
O C. They are negatively charged.
O D. They form bonds in molecules.
Answer: The correct option is A) They have fixed energy values.
Explanation:
Electron is one of the sub-atomic particle present around the nucleus of an atom which is negatively charged.
In an atomic model, it is assumed that the electron revolves around the nucleus in discrete orbits having fixed energy levels.
These electrons when jumping from one energy level to another, some amount of radiation is either emitted or absorbed.
These fixed energy levels are given by the Bohr model and thus, the electrons are quantized.
Hence, the correct option is A) They have fixed energy values.
Answer: They have fixed energy values
Explanation: a pex
Which best describes an alpha particle that is emitted during nuclear decay?
A. A helium nucleus
B. A hydrogen nucleus
C. An electron
D. A positron
Answer:
A helium nucleus
Thre types of radiation
Alpha: Helium nucleus
Beta: Electron
Gamma: Gamma rays
Which of these is a measure of the average kinetic energy of the molecules of a material? A.heat B.temperature C.thermal energy D.bonding energy
Answer:
b temperature
Explanation:
Temperature is a measure of the average kinetic energy of the particles in a substance
Can someone please solve this for me and explain it
83.3% yield
Explanation:
First, we need to convert 240 g of [tex]Fe_{2}O_{3}[/tex] into moles:
[tex]240 \:g \:Fe_{2}O_{3} \:\times(\frac{1\:\text{mol}\:Fe_{2}O_{3}}{159.69\: \text {g}\:Fe_{2}O_{3}})[/tex]
[tex]=1.50 \:\text{mol}\:Fe_{2}O_{3}[/tex]
Next, find the theoretical Fe yield using molar ratios.
[tex]1.50 \: \text {mol} \: Fe_{2}O_{3}\: \times (\frac{2\: \text{mol} \: Fe}{1 \:\text{mol} \: Fe_{2}O_{3}})[/tex]
[tex] = 3.00 \: \text{mol} \: Fe[/tex]
Then convert this back into grams:
[tex]3.00 \: \text{mol} \:Fe \times (\frac{55.845 \: \text{g} \: Fe}{1 \: \text{mol} \: Fe}) = 168 \: \text{g} \: Fe[/tex]
Note that actual yield is only 140 g Fe so percentage yield is
[tex]\dfrac{140\:\text{g}\:Fe}{168\:\text{g}\:Fe} \times 100[/tex]%= 83.3%
83.3%
The answer is 83.3%
BRAINILIEST PLEASEhelp me with this attachment please
Answer:
See explanation
Explanation:
Let us recall that the basic rule in writing balanced chemical reaction equations is that the number of atoms of each element on the right hand side of the reaction equation is the same of the number of atoms of the same element on the left hand side of the reaction equation.
The reaction of red hot iron and steam is written as follows;
3Fe + 4H2O → Fe3O4 + 4H2.
The decomposition reaction of ammonium dichromate is written as;
(NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O
Reaction of aluminium, sodium hydroxide and water is as follows,
2Al + 2NaOH + 2H2O ----> 2NaAlO2 + 3H2
Reaction of potassium bicarbonate with sulphuric acid;
2KHCO3 + H2SO4 -------> K2SO4 + 2H2O + 2CO2
Reaction of zinc and sodium hydroxide is as follows;
Zn + 2NaOH→Na2ZnO2 + H2
HELP WILL GIVE BRAINLIEST!!
Using the following reaction, calculate the percent yield of CaO if 20.4g of CaCO3 are heated and 10.6g of CaO are actually produced
CaCO3(s) → CaO(s) + CO2(g)
Answer:
92.79%
Explanation:
The Molar mass :
Molar mass of CaC03 = (40 + 12 + (16*3)) = 100 g/mol
Molar mass of Ca0 = (40 + 16) = 56 g/mol
Theoretical yield :
20.4g CaCO3 * 56g Ca0 / 100g CaCO3
= (20.4 * 56)/100 = 11.424 CaO
The actual yield Given is : 10.6g Ca0
The percentage yield is given by :
% yield = Actual yield / theoretical yield
% yield = 10.6 g / 11.424 g * 100%
% yield = 0.9278711 * 100%
Percentage yield = 92.79%
Which group on the periodic table contains chemical elements that are shiny and conduct electricity?
A.
Metalloids
B.
Nonmetals
C.
Representative elements
D.
Metals
Calculate the change in thermal energy when 2kg of water is heated from 20°C to 80°C.
Answer:
504000 J
Explanation:
Applying,
Δq = cm(Δt)............. Equation 1
Where Δq = change in thermal energy, c = specific heat capacity of water, m = mass of water, Δt = change in temperature.
From the question,
Given: m = 2 kg, Δt = 80-20 = 60°C
Constant; c = 4200 J/kg.°C
Substitute these values into equation 1
Δq = 2(4200)(60)
Δq = 504000 J
Hence the thermal energy is 504000 J
What is a molecule containing only carbon and hydrogen called?
O A. An inorganic molecule
O B. A hydrocarbon
O c. A metallic molecule
D. An ionic molecule
(answer is provided) :)
Answer:
A
Explanation:
did that on my test
How does dissolving a salt molecule in water make its atoms ionize?
Answer:
It's take 1 and a half hours
Explanation:
Ugbdunvisrtg
Equation balancing
a. S(s) + O2(g) → SO3(g)
b. 2Al(s) + 3Cl2(g) ► 2AICI3(s)
E. 2NaOH(s) + H2SO4(ac) —Na2So (ac) + H2O(l)
d. C3H8(g) + 50(g) -3C02(g) + 4H2O(g)
Answer:
For a: The balanced equation is [tex]2S(s)+3O_2(g)\rightarrow 2SO_3(g)[/tex]
For c: The balanced equation is [tex]2NaOH(s)+H_2SO_4(aq)\rightarrow Na_2SO_4(aq)+2H_2O(l)[/tex]
Explanation:
A balanced chemical equation is one where all the individual atoms are equal on both sides of the reaction. It follows the law of conservation of mass.
For (a):The given unbalanced equation follows:
[tex]S(s)+O_2(g)\rightarrow SO_3(g)[/tex]
To balance the equation, we must balance the atoms by adding 2 infront of both [tex]S(s)[/tex] and [tex]SO_3[/tex] and 3 in front of [tex]O_2[/tex]
For the balanced chemical equation:
[tex]2S(s)+3O_2(g)\rightarrow 2SO_3(g)[/tex]
For (b):The given balanced equation follows:
[tex]2Al(s)+3Cl_2(g)\rightarrow 2AlCl_3(s)[/tex]
The given equation is already balanced.
For (c):The given unbalanced equation follows:
[tex]2NaOH(s)+H_2SO_4(aq)\rightarrow Na_2SO_4(aq)+H_2O(l)[/tex]
To balance the equation, we must balance the atoms by adding 2 infront of [tex]H_2O(l)[/tex]
For the balanced chemical equation:
[tex]2NaOH(s)+H_2SO_4(aq)\rightarrow Na_2SO_4(aq)+2H_2O(l)[/tex]
For (d):The given balanced equation follows:
[tex]C_3H_8(g)+5O_2(g)\rightarrow 3CO_2(g)+4H_2O(g)[/tex]
The given equation is already balanced.
describe about chromatography
Answer: Chromatography is a technique for the separation of a mixture. The mixture is dissolved in a fluid (gas, solvent, water, ...) called the mobile phase, which moves it through a system (a column, a capillary tube, a plate, or a sheet) on which is fixed a material called the stationary phase.
Explanation:
What is the ratio of sodium ion to phosphate ion
in the formula Na3PO4?
Answer:
42,07%and 18,90%
Explanation:
Calculate the number of O atoms in 0.364 g of CaSO4 · 2H2O
Answer:
= 7.66 x 10²¹ oxygen atoms in 0.364 grams of CaSO₄·2H₂O
Explanation:
For problems like this posting, one needs an understanding of the following topics:
The definition of the mole
1 mole of substance = mass in grams of substance containing 1 Avogadro's Number ( = 6.023 x 10²³ ) of particles of the specified substance. This is generally one formula weight of the substance of interest. From this, the following equivalent relationships should be memorized:
1 mole = 1 formula weight = 1 mole weight (g)= 6.023 x 10²³ particles
Converting grams to moles:
Given grams => moles = grams/gram formula wt
Converting moles to grams:
Given moles => grams = moles x gram formula wt
_________________________________________________________
Calculate the number of O atoms in 0.364 g of CaSO₄ · 2H₂O.
Given mass CaSO₄ · 2H₂O = 0.364 grams
Formula Wt CaSO₄ · 2H₂O = 172 g/mole
moles CaSO₄ · 2H₂O = mass CaSO4 · 2H2O / formula Wt. CaSO₄ · 2H₂O
= 0.364 g CaSO₄·2H₂O / 172 g CaSO4·2H2O
= (0.364/172) mole CaSO₄·2H₂O
= 2.12 x 10⁻³ mole CaSO₄·2H₂O
∴ number of Oxy (O) atoms in 0.364 grams CaSO₄·2H₂O
= (2.12 x 10⁻³ mole CaSO₄ · 2H₂O)(6.023 x 10²³ molecules CaSO₄· 2H₂O/ mole)
= 1.276876 x 10²¹molecules CaSO₄· 2H₂O CaSO₄2H₂O
= 1.276876 x 10²¹ molecules CaSO₄· 2H₂O x 6 oxygen atoms / molecule
= 7.661256 x 10²¹ oxygen atoms in 0.364 grams of CaSO₄·2H₂O
= 7.66 x 10²¹ oxygen atoms in 0.364 grams of CaSO₄·2H₂O
what do u understand by the word
ATOM
Answer:
An atom is a particle of matter that uniquely defines a chemical element . An atom consists of cental nucleus that is usually surrounded by one or more electrons. Each electrons is negatively charged.
Hope this helps you! bye
Which statement is true for most autotrophic organisms?
A. They carry on extracellular digestion of nutrients before they ingest them.
B. They synthesize organic molecules from inorganic molecules.
C. They obtain organic molecules from heterotrophic organisms.
O O
D. They require no external energy source.
omg yees
eExplanation:
2. Evaluate :
(i) 28 : 23
Answer:
28/23
Explanation:
28 : 23
this is written as ,
28/23
u can convert into simplest form but in this question u can't so leave it as it is.
help please I would really appreciate
Answer:
option C
Positive terminal of the cell connected with redExplanation:
hope it may help you
tfttvvrggvcfdtyiuhouiug
Electronegativity6. Which one of the following bonds is the least polar one?
options:
C-F
C-Cl
C-Br
C-I
Help please and thank you
What is the mass of 0.125 moles of tin sulfate (SnSO4)?
Answer:
26.85 grams
Explanation:
The formula for mole calculations is number of moles = given mass/gram-formula mass.
The number of moles is given to us, which is 0.125.
The gram formula mass of SnSO4 is about 214.77.
Plug in the values we have into the equation. It should look like this:
0.125 = x / 214.77
Solve for x by multiplying 214.77 and 0.125. The answer should be about 26.85 grams.
I have oxygen gas at 2 L and 2 atm. At what pressure is the oxygen gas if my volume decreases to 1 L?
Answer: The oxygen gas has a pressure of 4 atm if my volume decreases to 1 L.
Explanation:
Given: [tex]V_{1}[/tex] = 2 L, [tex]P_{1}[/tex] = 2 atm
[tex]V_{2}[/tex] = 1 L, [tex]P_{2}[/tex] = ?
Formula used to calculate the new pressure is as follows.
[tex]P_{1}V_{1} = P_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]P_{1}V_{1} = P_{2}V_{2}\\2 atm \times 2 L = P_{2} \times 1 L\\P_{2} = 4 atm[/tex]
Thus, we can conclude that the oxygen gas has a pressure of 4 atm if my volume decreases to 1 L.
