A spring scale hung from the ceiling stretches by 6.1cm when a 2.0kg mass is hung from it. The 2.0kg mass is removed and replaced with a 2.8kg mass.What is the stretch of the spring?

Answers

Answer 1
2.0kg and the mass of sometimes makes it hard 2.8kg

Related Questions

Una pelota de basket es soltada desde 2.5 m de altura y rebota con una velocidad igual a 3/4 partes de la velocidad que llego. ¿ a qué altura alcanza la bola en el rebote ? ¿ cuánto tiempo transcurre desde que rebota ?

Answers

Answer:

Tenemos dos problemas a resolver acá:

Primero, debemos encontrar la velocidad con la que la pelota impacta el suelo.

Acá podemos usar la conservación de la energía.

E = U + K

U = energía potencial = m*g*H

m = masa

g = aceleración gravitatoria = 9.8m/s^2

H = altura

K = energía cinética = (m/2)*V^2

donde V es la velocidad.

Inicialmente, cuando la pelota es soltada, su velocidad es cero, entonces solo tenemos energía potencial:

Ei = U = m*(9.8m/s^2)*2.5m

Al final, cuando la pelota esta por impactar el suelo, la altura tiende a cero, entonces ya no hay energía potencial, solo hay energía cinética:

Ef = (m/2)*V^2

Y como la energía se conserva, la energía final es igual a la inicial, entonces:

m*(9.8m/s^2)*2.5m = (m/2)*V^2

Podemos resolver esto para V, y asi obtener la velocidad con la que la pelota impacta el suelo.

V = √(2*(9.8m/s^2)*2.5m) = 7m/s

Ahora respondamos la segunda parte.

Una vez la pelota rebota, su aceleración va a estar dada solamente por la aceleración gravitatoria, entonces tenemos:

A(t) = -9.8m/s^2

Para obtener su velocidad integramos:

V(t) = (-9.8m/s^2)*t + V0

donde V0 es la velocidad con la que la pelota reboto, que sabemos que es 3/4 de 7m/s

V0 = (3/4)*7m/s = (21/4) m/s

Así, la ecuación de la velocidad es:

V(t) = (-9.8m/s^2)*t + (21/4) m/s

Sabemos que la altura máxima se da cuando la velocidad es igual a cero, entonces primero calculemos el valor de t tal que esto ocurra:

V(t) = 0 = (-9.8m/s^2)*t + (21/4) m/s

         t =  (21/4) m/s/9.8m/s^2 = 0.54 s

Ahora debemos encontrar la ecuación de la posición y evaluarlo en este tiempo.

Para ello integramos de vuelta:

P(t) = (1/2)(-9.8m/s^2)*t^2 + (21/4 m/s)*t + P0

donde P0 es la posición inicial, como la pelota rebota en el suelo, la posición inicial es el suelo, el cual representamos con 0, entonces la ecuación de la posición es:

P(t) = (1/2)(-9.8m/s^2)*t^2 + (21/4 m/s)*t  

La altura máxima estará dada por esta ecuación evaluada en t = 0.54 s

P(0.54s) =  (1/2)(-9.8m/s^2)*(0.54s)^2 + (21/4 m/s)*0.54s = 1.81 m

La altura máxima es 1.81 metros.

Y entre que rebota y llega a esta altura máxima, transcurren 0.54 segundos.

Kulsum’s TV uses 45 W. How much does it cost her to watch TV for one month (30 days). She watches TV for 4 hours/day during mid-peak time (10.4 cents/kWh).

Answers

Answer:

Total cost = 56.16 cents

Explanation:

Given the following data;

Power = 45 Watts

Time = 4 hours

Number of days = 30 days

Cost = 10.4 cents

To find how much does it cost her to watch TV for one month;

First of all, we would determine the energy consumption of the TV;

Energy = power * time

Energy = 45 * 4

Energy = 180 Watt-hour = 180/1000 = 0.18 Kwh (1 Kilowatts is equal to 1000 watts).

Energy consumption = 0.18 Kwh

Next, we find the total cost;

Total cost = energy * number of days * cost

Total cost = 0.18 * 30 * 10.4

Total cost = 56.16 cents

Your car breaks down in the middle of nowhere. A tow truck weighing 4000 lbs. comes along and agrees to tow your car, which weighs 2000 lbs., to the nearest town. The driver of the truck attaches his cable to your car at an angle of 20 degrees to horizontal. He tells you that his cable has a strength of 500 lbs. He plans to take 10 secs to tow your car at a constant acceleration from rest in a straight line along a flat road until he reaches the maximum speed of 45 m.p.h. Can the driver carry out the plan

Answers

Answer:

F = 1010 Lb

the tension on the cable is greater than its resistance, which is why the plan is not viable

Explanation:

For this exercise we can use the kinematic relations to find the acceleration and with Newton's second law find the force to which the cable is subjected.

          v = v₀ + a t

how the car comes out of rest v₀ = 0

          a = v / t

let's reduce to the english system

          v = 45 mph (5280 ft / 1 mile) (1h / 3600) = 66 ft / s

let's calculate

          a = 66/10

          a = 6.6 ft / s²

now let's write Newton's second law

X axis

         Fₓ = ma

with trigonometry

         cos 20 = Fₓ / F

         Fₓ = F cos 20

we substitute

          F cos 20 = m a

          F = m a / cos20

          W = mg

          F = [tex]\frac{W}{g} \ \frac{a}{cos 20}[/tex]

let's calculate

          F = [tex]\frac{2000}{32} \ \frac{6.6 }{cos20}[/tex](2000/32) 6.6 / cos 20

          F = 1010 Lb

Under these conditions, the tension on the cable is greater than its resistance, which is why the plan is not viable.

Select the correct answer.
What are the directions of an object's velocity and acceleration vectors when the object moves in a circular path with a constant speed?
OA. The question is meanimgless, since the acceleration is zero.
ов.
The vectors point in opposite directions.
Oc.
Both vectors point in the same direction.
OD
The vectors are perpendicular,

Answers

Answer:

A

Explanation:

If the object is moving at a constant speed, the object isn't accelerating as the velocity doesn't change.

Answer: C.

Explanation:  plato users

Determine the tension in the string that connects M2 and M3.

Answers

therefore mass m1=4.8 kg and the tension in the horizontal spring T2=10N.

HOPE IT HELPS YOU

PLEASE Mark me as brainliest.

☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️✌️✌️✌️✌️✌️✌️✌️✌️❤️❤️❤️

A child throws a ball vertically upward to a friend on a balcony 28 m above him. The friend misses the ball on its upward flight but catches it as it is falling back to earth. If the friend catches the ball 3.0 s after it is thrown, at what time did it pass him on its upward flight

Answers

Answer:

[tex]t=1.9 sec[/tex]

Explanation:

From the question we are told that:

Height [tex]h=28m[/tex]

Time [tex]t=3s[/tex]

Generally the Newton's equation for Initial velocity upward is mathematically given by

 [tex]s=ut+\frtac{1}{2}at^2[/tex]

 [tex]28=3u-\frac{1}{2}*9.8*3^2[/tex]

 [tex]u=24.03m/s[/tex]

Generally the velocity at  elevation and depression occurs  as ball arrives and passes through S=28

 [tex]v=\sqrt{24.03-2*9.8*28}[/tex]

 [tex]v=5.35m/s and -5.35m/s[/tex]

Generally the Newton's equation for time to reach initial velocity  is mathematically given by

 [tex]v=u+at[/tex]

 [tex]5.35=24.03-9.8t[/tex]

 [tex]t=\frac{28.03-5.35}{9.8}[/tex]

 [tex]t=1.9 sec[/tex]

help me with this question ​

Answers

Explanation:

Let's set the x-axis to be parallel to the and positive up the plane. Likewise, the y-axis will be positive upwards and perpendicular to the plane. As the problem stated, we are going to assume that m1 will move downwards so its acceleration is negative while m2 moves up so its acceleration is positive. There are two weight components pointing down the plane, [tex]m_1g \sin \theta[/tex] and [tex]m_2g \sin \theta[/tex] and two others pointing up the plane, the two tensions T along the strings. There is a normal force N pointing up from the plane and two pointing down, [tex]m_1g \sin \theta[/tex] and [tex]m_2g \sin \theta[/tex]. Now let's apply Newton's 2nd law to this problem:

x-axis:

[tex]m1:\:\:\:\displaystyle \sum_i F_i = T - m_1g \sin \theta = - m_1a\:\:\:\:(1)[/tex]

[tex]m2:\:\:\:\displaystyle \sum_i F_i = T - m_2g \sin \theta = m_2a\:\:\:\:(2)[/tex]

y-axis:

[tex]\:\:\:\displaystyle \sum_i F_i = N - m_1g \cos \theta - m_2g \cos \theta = 0[/tex]

Use Eqn 1 to solve for T,

[tex]T = m_1(g \sin \theta - a)[/tex]

Substitute this expression for T into Eqn 2,

[tex]m_1g \sin \theta - m_1a - m_2g \sin \theta = m_2a[/tex]

Collecting all similar terms, we get

[tex](m_1 + m_2)a = (m_1 - m_2)g \sin \theta[/tex]

or

[tex]a = \left(\dfrac{m_1 - m_2}{m_1 + m_2} \right)g \sin \theta[/tex]

A police car in hot pursuit goes speeding past you. While the siren is approaching, the frequency of the sound you hear is 5500 Hz. When the siren is receding away from you, the frequency of the sound is 4500 Hz. Use the Doppler formula to determine the velocity of the police car. Use vsound=330 m/s.
What is the velocity v of the police car ?

Answers

Vs = 34m/s
I don’t have an explanation my apologies.

When a police car in hot pursuit goes speeding past you, the velocity v of the police car is 33 m/s.

What is the Doppler formula?

The formula is used when there exists a Doppler shift. The Doppler shift is due to the relative motion of sound waves between the source and observer.

The frequency increase by the Doppler effect is represented by the formula

f' = [tex]\dfrac{v-v_{o} }{v-v_{s} }[/tex]× f

Given the frequency of source f' is 5500 Hz . Velocity of the observer v₀  is 0.

Substituting the value into the equation will give us the velocity of the police car.

[tex]5500 = \dfrac{330}{330-v} \times f[/tex]...........(1)

When the car is receding, the frequency of the receiving signal f = 4500 Hz.

[tex]4500 = \dfrac{330}{330+v} \times f[/tex]..........(2)

Solving both equation, we get the velocity of a police car.

v = 33 m/s

Therefore, the velocity v of the police car is 33 m/s.

Learn more about Doppler equation.

https://brainly.com/question/15318474

#SPJ2

A 70-kg boy is surfing and catches a wave which gives him an initial speed of 1.6 m/s. He then drops through a height of 1.60 m, and ends with a speed of 8.5 m/s. How much nonconservative work (in kJ) was done on the boy

Answers

Answer:

3.6 KJ

Explanation: Given that a 70-kg boy is surfing and catches a wave which gives him an initial speed of 1.6 m/s. He then drops through a height of 1.60 m, and ends with a speed of 8.5 m/s. How much nonconservative work (in kJ) was done on the boy

The workdone = the energy.

There are two different energies in the scenario - the potential energy (P.E ) and the kinetic energy ( K.E )

P.E = mgh

P.E = 70 × 9.8 × 1.6

P.E = 1097.6 J

P.E = 1.098 KJ

K.E = 1/2mv^2

K.E = 1/2 × 70 × 8.5^2

K.E = 2528.75 J

K.E = 2.529 KJ

The non conservative workdone = K.E + P.E

Work done = 1.098 + 2.529

Work done = 3.63 KJ

Therefore, the non conservative workdone is 3.6 KJ approximately

A 1 500-kg car rounds an unbanked curve with a radius of 52 m at a speed of 12.0 m/s. What minimum coefficient of friction must exist between the road and tires to prevent the car from slipping

Answers

Explanation:

The centripetal force [tex]F_c[/tex] on the car must equal the frictional force f in order to avoid slipping off the road. Let's apply Newton's 2nd law to the y- and x-axes.

[tex]y:\:\:\:\:N - mg = 0[/tex]

[tex]x:\:\:F_c = f \Rightarrow \:\:\:m \dfrac{v^2}{r} = \mu N[/tex]

or

[tex]m \dfrac{v^2}{r} = \mu mg[/tex]

Solving for [tex]\mu[/tex],

[tex]\mu = \dfrac{v^2}{gr} = \dfrac{(12.0\:\frac{m}{s})^2}{(9.8\:\frac{m}{s^2})(52\:m)} = 0.28[/tex]

12. What type of circuit is the diagram below?
series circuit
parallel circuit

Answers

Answer:

parallel circuit

Explanation:

An electric circuit can be defined as an interconnection of electrical components which creates a path for the flow of electric charge (electrons) due to a driving voltage.

Generally, an electric circuit consists of electrical components such as resistors, capacitors, battery, transistors, switches, inductors, etc.

Basically, the components of an electric circuit can be connected or arranged in two forms and these includes;

I. Series circuit

II. Parallel circuit: it's an electrical circuit that has the same potential difference (voltage) across its terminals or ends. Thus, its components are connected within the same common points so that only a portion of current flows through each branch.

Hence, the type of circuit that the above diagram above represents is a parallel circuit.

Answer:

parallel circuit

Explanation:

I got it right on my exam

A camera lens with focal length f = 50 mm and maximum aperture f>2
forms an image of an object 9.0 m away. (a) If the resolution is limited
by diffraction, what is the minimum distance between two points on the
object that are barely resolved? What is the corresponding distance
between image points? (b) How does the situation change if the lens is
“stopped down” to f>16? Use λ= 500 nm in both cases

Answers

Answer:

The minimum distance between two points on the  object that are barely resolved is 0.26 mm

The corresponding distance between the  image points = 0.0015 m

Explanation:

Given  

focal length f = 50 mm and maximum aperture f>2

s =  9.0 m

aperture = 25 mm = 25 *10^-3 m

Sin a = 1.22 *wavelength /D  

Substituting the given values, we get –  

Sin a = 1.22 *600 *10^-9 m /25 *10^-3 m

Sin a = 2.93 * 10 ^-5 rad

Now  

Y/9.0 m = 2.93 * 10 ^-5

Y = 2.64 *10^-4 m = 0.26 mm

Y’/50 *10^-3 = 2.93 * 10 ^-5  

Y’ = 0.0015 m

which of the following is a correct statement. a. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are constant. b. In dc steady state conditions, the voltages across the capacitors are zero and the currents through the capacitance are constant. The current through the inductors are constant and the voltage across the inductances are zero. c. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are zero and the voltage across the inductances are constant. d. WIn dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

Answers

Answer:

d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

Explanation:

The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.

So, in dc steady state, the voltage across a capacitor is constant and the current zero.

The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.

So, in dc steady state, the voltage across an inductor is zero and the current constant.

So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

The answer is d.

why are you teachers regarded as professionals​

Answers

Answer:

coz teaching is their profession.

An object with mass m = 0.56 kg is attached to a string of length r = 0.72 m and is rotating with an angular velocity ω = 1.155 rad/s. What is the centripetal force acting in the object?

Answers

Answer:

The centripetal force is 0.54 N.

Explanation:

mass, m = 0.56 kg

radius, r = 0.72 m

angular speed, w = 1.155 rad/s

The centripetal force is given by

[tex]F = m r w^2\\\\F =0.56\times 0.72\times 1.155\times 1.155\\\\F = 0.54 N[/tex]

A shooting star is actually the track of a meteor, typically a small chunk of debris from a comet that has entered the earth's atmosphere. As the drag force slows the meteor down, its kinetic energy is converted to thermal energy, leaving a glowing trail across the sky. A typical meteor has a surprisingly small mass, but what it lacks in size it makes up for in speed. Assume that a meteor has a mass of 1.5

Answers

Answer:

A. Power generated by meteor = 892857.14 Watts

Yes. It is obvious that the large amount of power generated accounts for the glowing trail of the meteor.

B. Workdone = 981000 J

Power required = 19620 Watts

Note: The question is incomplete. A similar complete question is given below:

A shooting star is actually the track of a meteor, typically a small chunk of debris from a comet that has entered the earth's atmosphere. As the drag force slows the meteor down, its kinetic energy is converted to thermal energy, leaving a glowing trail across the sky. A typical meteor has a surprisingly small mass, but what it lacks in size it makes up for in speed. Assume that a meteor has a mass of 1.5 g and is moving at an impressive 50 km/s, both typical values. What power is generated if the meteor slows down over a typical 2.1 s? Can you see how this tiny object can make a glowing trail that can be seen hundreds of kilometers away? 61. a. How much work does an elevator motor do to lift a 1000 kg elevator a height of 100 m at a constant speed? b. How much power must the motor supply to do this in 50 s at constant speed?

Explanation:

A. Power = workdone / time taken

Workdone = Kinetic energy of the meteor

Kinetic energy = mass × velocity² / 2

Mass of meteor = 1.5 g = 0.0015 kg;

Velocity of meteor = 50 km/s = 50000 m/s

Kinetic energy = 0.0015 × (50000)² / 2 = 1875000 J

Power generated = 1875000/2.1 = 892857.14 Watts

Yes. It is obvious that the large amount of power generated accounts for the glowing trail of the meteor.

B. Work done by elevator against gravity = mass × acceleration due to gravity × height

Work done = 1000 kg × 9.81 m/s² × 100 m

Workdone = 981000 J

Power required = workdone / time

Power = 981000 J / 50 s

Power required = 19620 Watts

Therefore, the motor must supply a power of 19620 Watts in order to lift a 1000 kg to a height of 100 m at a constant speed in 50 seconds.

plz answer the question

Answers

Answer:

Ray A - incident ray

Ray B - reflected ray

what change occurs to the mass of an object when a unbalanced

Answers

Answer:

The mass decreases

Explanation:

Just smart

LC-circuit of the radio receiver consists of variable capacitor (Cmin= 1 pF, Cmax=10 pF) and inductor
with inductance 1 µH. Determine the wavelength range of this radio receiver.

Answers

Answer:

the radio can tune wavelengths between 1.88 and 5.97 m

Explanation:

The signal that can be received is the one that is in resonance as the impedance of the LC circuit.

         X = X_c - X_L

         X = 1 / wC - w L

at the point of resonance the two impedance are equal so their sum is zero

         X_c = X_L

         1 / wC = w L

         w² = 1 / CL

         w = [tex]\sqrt{\frac{1}{CL} }[/tex]

let's look for the extreme values

C = 1  10⁻¹² F

         w = [tex]\sqrt{\frac{1}{ 1 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]

         w = [tex]\sqrt{1 \ 10^{18}}[/tex]

         w = 10⁹ rad / s

C = 10 10⁻¹² F

         w = [tex]\sqrt{\frac{1}{10 \ 10^{-12} \ 1 \ 10^{-6}} }[/tex]Ra 1/10 10-12 1 10-6

         w = [tex]\sqrt{0.1 \ 10^{18}}[/tex]Ra 0.1 1018

         w = 0.316 10⁹ rad / s

Now the angular velocity and the frequency are related

           w = 2π f

           f = w / 2π

the light velocity  is

           c = λ f

           λ = c / f

we substitute

          λ = c 2π/w

               

we calculate the two values

 C = 1 pF

          λ₁ = 3 10⁸ 2π / 10⁹

          λ₁= 18.849 10⁻¹ m

          λ₁ = 1.88 m

C = 10 pF

           λ₂ = 3 10⁸ 2π / 0.316 10⁹

           λ₂ = 59.65 10⁻¹ m

           λ₂ = 5.97 m

so the radio can tune wavelengths between 1.88 and 5.97 m

Increasing the surfactant concentration above the critical micellar concentration
will result in: Select one:
1.An increase in surface tension
2. A decrease in surface tension
3. No change in surface tension
4.None of the above​

Answers

Answer:

Explanation:no change in surface tension

An increase in the surfactant concentration above the critical micellar concentration will result in no change in surface tension.

In water-gas interface, surfactant reduces the surface tension of water by adsorbing at the liquid–gas interface.

Also, in oil-water interface, surfactant reduces the interfacial tension between oil and water by adsorbing at the oil-water interface.

The concentration of the surfactant can increase to a level called critical micellar concentration, which is an important characteristic of a surfactant.

As the concentration of the surfactant increases before critical micellar concentration, the surface tension changes strongly with an increase in the concentration of the surfactant. After reaching the critical micellar concentration, any further increase in the concentration will result in no change of the surface tension, that is the surface tension will be constant.

Thus, increasing the surfactant concentration above the critical micellar concentration will result in no change in surface tension.

Learn more here: https://brainly.com/question/15785205

A helicopter is ascending vertically witha speed of 5.40 m/s. At a height of 105 m above the earth a package is dropped from the helicopter. How much time does is take for the package to reach the ground

Answers

Answer: 5.21 s

Explanation:

Given

Helicopter ascends vertically with [tex]u=5.4\ m/s[/tex]

Height of helicopter [tex]h=105\ m[/tex]

When the package leaves the helicopter, it will have the same vertical velocity

Using equation of motion

[tex]\Rightarrow h=ut+\dfrac{1}{2}at^2\\\\\Rightarrow 105=-5.4t+0.5\times 9.8t^2\\\Rightarrow 4.9t^2-5.4t-105=0\\\\\Rightarrow t=\dfrac{5.4\pm \sqrt{5.4^2+4\times 4.9\times 105}}{2\times 4.9}\\\\\Rightarrow t=\dfrac{5.4\pm 45.68}{9.8}\\\\\Rightarrow t=5.21\ s\quad \text{Neglect negative value}[/tex]

So, package will take 5.21 s to reach the ground

An investigator collects a sample of a radioactive isotope with an activity of 490,000 Bq.48 hours later, the activity is 110,000 Bq. Part A For the steps and strategies involved in solving a similar problem, you may view a Video Tutor Solution What is the half-life of the sample?

Answers

Answer:

The correct answer is "22.27 hours".

Explanation:

Given that:

Radioactive isotope activity,

= 490,000 Bq

Activity,

= 110,000 Bq

Time,

= 48 hours

As we know,

⇒ [tex]A = A_0 e^{- \lambda t}[/tex]

or,

⇒ [tex]\frac{A}{A_0}=e^{-\lambda t}[/tex]

By taking "ln", we get

⇒ [tex]ln \frac{A}{A_0}=- \lambda t[/tex]

By substituting the values, we get

⇒ [tex]-ln \frac{110000}{490000} = -48 \lambda[/tex]

⇒    [tex]-1.4939=-48 \lambda[/tex]

                 [tex]\lambda = 0.031122[/tex]

As,

⇒ [tex]\lambda = \frac{ln_2}{\frac{T}{2} }[/tex]

then,

⇒ [tex]\frac{ln_2}{T_ \frac{1}{2} } =0.031122[/tex]

⇒ [tex]T_\frac{1}{2}=\frac{ln_2}{0.031122}[/tex]

         [tex]=22.27 \ hours[/tex]  

A pilot drops a package from a plane flying horizontally at a constant speed. Neglecting air resistance, when the package hits the ground the horizontal location of the plane will Group of answer choices be behind the package. be over the package. be in front of the package depend of the speed of the plane when the package was released.

Answers

Answer:

The location of helicopter is behind the packet.

Explanation:

As the packet also have same horizontal velocity as same as the helicopter, and also it has some vertical velocity as it hits the ground.

The horizontal velocity remains same as there is no force in the horizontal direction. The vertical  velocity goes on increasing as acceleration due to gravity acts.

So, the helicopter is behind the packet.

g you hang an object of mass m on a spring with spring constant k and find that it has a period of T. If you change the spring to one that has a spring constant of 2 k, the new period is

Answers

Answer:

a)   T = 2π [tex]\sqrt{\frac{m}{k} }[/tex],  b)  T ’= [tex]\frac{1}{\sqrt{2} } T[/tex]

Explanation:

a) A system formed by a mass and a spring has a simple harmonic motion with angular velocity

          w² = k / m

angular velocity and period are related

          w = 2π /T

     

we substitute

          4π²/ T² = k / m

           T = 2π [tex]\sqrt{\frac{m}{k} }[/tex]

b) We change the spring for another with k ’= 2 k, let's find the period

           T ’= 2π [tex]\sqrt{\frac{m}{k'} }[/tex]

           T ’= 2π [tex]\sqrt{ \frac{m}{2k} }[/tex]

           T ’= [tex]\frac{1}{\sqrt{2} } T[/tex]

Who stated that man is an animal

Answers

aristotle is the answer to this question

Which describes farsightedness? O Distant objects are blurry. O Concave lenses can correct it. O Objects appear larger when wearing corrective glasses. O Corrective glasses do not change apparent the size of objects.​

Answers

Answer:

O Distant objects are blurry. describes farsightedness.

Explanation:

Farsightedness (hyperopia) is a common vision condition in which you can see distant objects clearly, but objects nearby may be blurry. The degree of your farsightedness influences your focusing ability.Farsightedness (hyperopia) is a common vision condition in which you can see distant objects clearly, but objects nearby may be blurry.

A train starts from rest and accelerates uniformly until it has traveled 5.6 km and acquired a forward velocity of The train then moves at a constant velocity of for 420 s. The train then slows down uniformly at until it is brought to a halt. The acceleration during the first 5.6 km of travel is closest to which of the following?

a. 0.19 m/s^2
b. 0.14 m/s^2
c. 0.16 m/s^2
d. 0.20 m/s^2
e. 0.17 m/s^2

Answers

Answer:

The acceleration during the first 5.6 km of travel is closest to 0.16 m/s²    

Option c) 0.16 m/s² is the correct answer.

Explanation:

Given the data in the question;

since the train starts from rest,

Initial velocity; u = 0 m/s

final velocity; v = 42 m/s

distance covered S = 5.6 km = ( 5.6 × 1000 )m = 5600 m

acceleration a = ?

From the third equation of motion;

v² = u² + 2as

we substitute in our values

( 42 )² = ( 0 )² + [ 2 × a × 5600 ]

1764 = 0 + [ 11200 × a ]

1764 = 11200 × a

a = 1764 / 11200

a = 0.1575 ≈ 0.16 m/s²          { two decimal place }

Therefore, The acceleration during the first 5.6 km of travel is closest to 0.16 m/s²    

Option c) 0.16 m/s² is the correct answer.

A 5.0-kg mass is placed at (3.0, 4.0) m, and a 6.0-kg mass is placed at (3.0, -4.0) m. What is the moment of inertia of this system of masses about the y-axis?

Answers

Answer:

the moment of inertia of this system of masses about the y-axis is 99 kgm²

Explanation:

Given the data in the question;

mass m₁ = 5.0 kg at point ( 3.0, 4.0 )

mass m₂ = 6.0 kg at point ( 3.0, -4.0 )

Now, Moment of inertia [tex]I[/tex] of this system of masses about the y-axis will be;

Moment of inertia [tex]I[/tex]ₓ = mixi²

Moment of inertia [tex]I[/tex] = m₁x₁² + m₂x₂²

we substitute

Moment of inertia [tex]I[/tex] = [ 5.0 × ( 3 )² ]  + [ 6.0 × ( 3 )² ]

Moment of inertia [tex]I[/tex] = [ 5.0 × 9 ]  + [ 6.0 × 9 ]

Moment of inertia [tex]I[/tex] = 45 + 54

Moment of inertia [tex]I[/tex] = 99 kgm²

Therefore, the moment of inertia of this system of masses about the y-axis is 99 kgm²

Give the missing ammeter reading a and b. suggest why more current flow through some bulbs than through others Grade 10 question and Answer

Answers

Answer:

becaude of electricity

Ethyl alcohol is :
a. None of the above
b. Semi polar solvent
c. Polar solvent
d. Non-Polar solvant​

Answers

Answer:

D. Non- polar solvant

Explanation:

l think that's it

Answer:

I think the answer is D polar solvent

Other Questions
Jim, Carla and Tomy are members of the same family. Carla is 5 years older than Jim. Tomy is 6 years older than Carla. The sum of their three ages is 31 years. How old is each one them? In (Noon) Company, direct materials are added at the beginning of the production process. Conversion costs are incurred evenly throughout the production process. Before inspection, some units are spoiled due to undetectable materials defects. Inspection occurs when units are 60% converted. Spoiled units generally constitute 6% of the good units. Data for December 2019 are as follows: WIP, beginning inventory 12/1/2019 Direct materials 22,500 units (100% complete) Conversion costs (55% complete) Started during December 76,700 units Completed and transferred out 12/31/2019 72,500 units WIP, ending inventory 12/31/2019 18,400 units Direct materials (100% complete) Conversion costs (65% complete) What is the number of normal spoilage units? Find the largest possible rectangular area you can enclose, assuming you have 128 meters of fencing. What is the (geometric) significance of the dimensions of this largest possible enclosure? Explain the general distribution of life in aquatic systems as a function of chemistry, geography, light, depth, salinity, and temperature. Help me please! Its timed if sin (A+B)=1 and tan (A-B)=1/sqroot 3 are acute angles. find out the value of A and B A - y = -2x + 40B - y = 2x + 40C y = 1/2x + 40D - y=-1/2x +40 h(x)=6/(x-3), find h(5) consider the equation k over x equals 12 where k is any number between 20 and 65 and X is a positive integer what are the possible values for x Mike roller skates with a constant speed of 10 miles per hour. How long will he take to travel a distance of 15 miles. An insurance company offers personal property insurance.Jewelry is a special type of personal property. Jewelry coverage requires that the user managing the request is trained to appraise jewelry. Assignments for jewelry appraisals must go toskilled users. Which routing approach would you use?A. Route requests to a decision table that routes the request to a work group in a location where there are users who have appraisal skills.B. Route directly to users who are members of a work group that uses skill rating parameters.C. Route requests to a reporting manager who assigns the request to a user to ensure fast processing.D. Route requests to a work group whose members have the skill rating parameters. Answer:5.The sum of three consecutive odd numbers is equal to thirteen more than twotimes the largest number. Let the first odd number be'n'.(a)Write the equation of the problemAnswer:(1 mark)(b)Solve for'n' to find the first numberAnswer:(1 mark)(C)What are the values of the second and third odd numbers?Answer:(1 mark)(d)Show that the equation is true.Answer: Given the balanced reaction: Zn + 2HCl H2 + ZnCl2If 5 grams of each reactant are available for the reaction and HCl is knownto be the limiting reactant, which of the following is correct?O Both reactants will be completely used up.O There will be excess of both reactants remaining.O HCl will be completely used up while Zn will remain in excess.O Zn will be completely used up while HCl will remain in excess. What kind of moderator is Chairman Reed? Effective. Chairman Reed is reminding participants of the rules for discussion, acknowledging Mr. Hollembeak's point of view, and asking him to support his point of view with facts. Effective Chairman Reed is keeping the discussion on topic by preventing other board members from participating and by challenging Mr. Hollembeak's claim by demanding proof. Ineffective. Chairman Reed is not following the rules for discussion that he lays out in his opening statement, and he is not properly staying on topic. Ineffective. Chairman Reed is not allowing the other board members to share their points of view, and he is not following the discussion rules. The table below shows two types of electromagnetic waves and three random applications of electromagnetic waves.Type of Wave Applications of WavesGamma rays 1. Used in spectrometers to measure elements on the surface of celestial bodiesRadio waves 2. Used to measure gravity fields3. Detect the heat released by astronomical objectsWhich of these best matches the waves with their applications? Gamma rays2 and radio waves3 Gamma rays3 and radio waves2 Gamma rays2 and radio waves1 Gamma rays1 and radio waves2 do themath!Wavelength FrequencySpeedMedium200 Hz1500 m/sThe table shows measurements ofsome properties of a sound wave inwater and in air.Water400 Hz3.75 mWater343 m/sAir (20C)10 mCalculate Using what you knowabout the relationship betweenwavelength, frequency, and speed,fill in the table.17.15 Hz343 m/sAir (20C)1aCHALLENGE What can this tabletellyou about the speed of a wave? The president of a small companymade $72,000 last year. She cut hersalary this year to $60,000 becausethe company was not doing as well.What was the percent decrease in her salary to the nearest percent? Magali exerts a force of 4.5 N to slide her Blackberry across the table (so she can hide it from Hina!). If she does 2.7 J of work in the process, how far has the Blackberry moved? Conjugate at least 2 of these verbs with on: danser, jouer, couter. Possible additional words to use: des musiciens, les rues, les places Express the ratio below in its simplest form. 1.5 : 1