A square field has a side length of 6x10³ meters. Which of the following is its area in square meter
(1) 6x106
(3) 36x106
(2) 36×10⁹
(4) 6x10⁹

Answer: $3.64

Step-by-step explanation:

At the store, you buy four toys for $1.5, which means you pay $1.5 * 4, or $6.

Then, you calculate the sales tax, which is 6%, which means you multiply $6 by (100% + 6%), or $6*(1.06) which is $6.36.

Finally, if you hand the cashier $10, and you spent $6.36, your change is $10 - $6.36, which is $3.64.

To estimate the distance traveled  we need to find the area under the velocity-time graph from 0 to 8 seconds So,The estimate for the distance the car traveled for the first 8 seconds is 4000 meters.

A velocity-time graph is a graphical representation that shows the velocity of an object on the y-axis and time on the x-axis. It is used to depict the change in velocity over time and can provide information about the acceleration or deceleration of an object.

The height of each strip can be estimated by taking the average of the velocities at the beginning and end of the strip.

Using the trapezium rule, the estimated area of each strip is:

Strip 1: 0.5 x (0 + 2) x (0 + (-500)) = -500 m/s

Strip 2: 0.5 x (2 + 4) x (-500 + (-1000)) = -1500 m/s

Strip 3: 0.5 x (4 + 6) x (-1000 + (-500)) = -1500 m/s

Strip 4: 0.5 x (6 + 8) x (-500 + 0) = -500 m/s

The total estimated area is the sum of the areas of the 4 strips:

Total estimated area = -500 + (-1500) + (-1500) + (-500) = -4000 m/s

Since the area represents the distance traveled by the car, we can take the absolute value of the area to get the estimated distance traveled:

Estimated distance traveled is = |-4000| = 4000 meters

To know more about areas visit:

https://brainly.com/question/18066837

#SPJ1

In conclusion, we can prove that[tex](A -B) U (A C)[/tex] is a superset of[tex]A - (B nC)[/tex] using both the choose-an-element method and the algebra of sets.

To answer this question, let's first draw two Venn diagrams to represent the sets A, B, and C. In the first Venn diagram, shade the region that represents[tex]A - (B nC)[/tex].

This is the region outside of the intersection of B and C and inside of A. In the second Venn diagram, shade the region that represents [tex](A -B) U (A C).[/tex] This is the union of the region outside of B and the region outside of C, both of which are inside of A. Based on these diagrams, we can make the conjecture that (A -B) U (A C) is a superset of A - (B nC).

To prove this conjecture, we can use the choose-an-element method. Let a be an element of A - (B nC). This means that a is in A, but not in B or C. Since a is in A, it is also in (A -B) U (A C), and therefore (A -B) U (A C) is a superset of A - (B n C).

We can also use the algebra of sets to prove this conjecture.[tex]A - (B n C) = (A -B) U (A -C) since A - (B n C)[/tex]is the union of the regions outside of B and outside of C, both of which are inside of A. This implies that (A -B) U (A C) is a superset of A - (B nC).

for such more questions on Venn diagram

https://brainly.com/question/30599101

#SPJ11

Answer:

2125 ft/min

33,000 ft

y = -2125x + 33,000

Step-by-step explanation:

A. -2125 feet per minute. You get this number when you divide 17,000 by 8 (rise over run). You could also use the formula y2-y/x2-x1 with the points (0, 33,000) and (8, 17,000).

B. 33,000 feet is the height of the plane before it starts descending, so it must be the starting value.

C. Plug in the values you got for A and B into the slope formula y = mx + b

y = -2125x + 33,000

Answer:153

Step-by-step explanation:

Answer: 4.5

Step-by-step explanation:

A^2 +B^2 =C^2

A^2 + 6^2 =7.5^2

A^2 + 36= 56.25

A^2= 20.25

A= square root of 20.25

A= 4.5

Answer: 72°

Step-by-step explanation:

To find the interior angle of this shape, use the formula 180(n-2)/n, where n is the amount of sides. Plugging 5 in for the interior angle of a pentagon, you get 180(3)/5, or 108°.

Using the statement that PR intersects QS, we can see that triangle QOR is isosceles (to get this, look at triangle PQR, and note that because it has 2 equal side lengths, and its last length is not equivalent to the other 2 sides, it is isosceles). Solving for angle PRQ, we know one angle is 108°, and the other two are equal. The total angle in a triangle is 180°, so (180°-108°)/2 = 36° (angles QPR and PRQ).

Since the angle of R = 108°, we can find angle PRS as 108° - 36°, or 72°. Since triangles PQR and QRS are similar (share the same angles and side lengths), we can see that angle RQS and RSQ are both 36°.

Since ORS is a triangle, its angle total is 180°. Since we know the angles ORS and OSR (respectively) already as 72° and 36°, we can subtract these angles to find angle ROS. 180°-72°-36° = 72°

If f(x,y) > 0 and is a continuous function defined over a rectangle R=[a,b]x[c,d], then the double integral over R of f(x,y) can be interpreted as the volume of a solid that lies in the first octant and under the graph of the function f(x,y) over the region R.

The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0, where f is a continuous function defined on a rectangle R = [a,b] × [c,d] is given as follows:

The double integral of f(x,y) over R, if f(x,y) > 0, gives the volume under the graph of the function f(x,y) over the region R in the first octant.

Consider a point P (x, y, z) on the graph of f(x, y) that is over the region R, and let us say that z = f(x,y). If f(x,y) > 0, then P is in the first octant (i.e. all its coordinates are positive).

As a result, the volume of the solid that lies under the graph of f(x,y) over the region R in the first octant can be found by integrating the function f(x,y) over the rectangle R in the xy-plane, which yields the double integral.

The following formula represents the double integral over R of f(x,y) if f(x,y) > 0:

∬Rf(x,y)dydx

The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0 is given by the volume of the solid that lies under the graph of the function f(x,y) over the region R in the first octant.

To know more about the "continuous function": https://brainly.com/question/30089593

#SPJ11

Using  the substitution method, the solution of the system of equations -4x + y = 3 and 5x - 2y = -9 is (x, y) = (1, 7)

We can solve this system of equations using the substitution method by solving for one variable in terms of the other in one equation, and then substituting that expression into the other equation. Here's how:

-4x + y = 3 (Equation 1)

5x - 2y = -9 (Equation 2)

Solving Equation 1 for y, we get:

y = 4x + 3

Now, we substitute this expression for y into Equation 2 and solve for x:

5x - 2(4x + 3) = -9

5x - 8x - 6 = -9

-3x = -3

x = 1

We have found the value of x to be 1. Now, we substitute this value back into Equation 1 to find the value of y:

-4(1) + y = 3

y = 7

Therefore, the solution to the system of equations is (x, y) = (1, 7)

Learn more about substitution method here

brainly.com/question/14619835

#SPJ4

Probability that X = 5:Since, Joe selects only 4 bags of lettuce. X can't be 5.P(X=5) = 0Hence, the probability that X = 0 is 0.3164 and the probability that X = 5 is 0.

The given problem can be solved using the concept of binomial distribution.

In the given question, there are 48 bags of lettuce out of which 12 bags are contaminated with listeria.

Joe selects 4 bags of lettuce. X is the random variable which represents the number of contaminated bags of lettuce selected by Joe. X can take values from 0 to 4. (as Joe selects only 4 bags).

Part A)Number of ways to select 4 bags of lettuce out of 48:This can be solved using the concept of combinations. The formula to calculate the number of combinations is[tex]:nCr = n! / r!(n-r)![/tex]Here, n = 48 and r = 4.

Number of ways = 48C4 = 194,580

Part B)Probability that X = 0:This can be calculated using the formula for the binomial distribution :

[tex]P(X = r) = nCr * p^r * q^(n-r)[/tex]

Here, p = probability of selecting contaminated bag = 12/48 = 0.25q = probability of selecting non-contaminated bag = 1-0.25 = 0.75Also, n = 4 and r = [tex]0P(X=0) = 4C0 * 0.25^0 * 0.75^4= 0.3164[/tex]

for such more questions on probability

https://brainly.com/question/13604758

#SPJ11

The required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Chebyshev’s Theorem:Chebyshev's Theorem states that, for any given data set, the proportion (or percentage) of data points that lie within k standard deviations of the mean must be at least (1 - 1/k2), where k is a positive constant greater than 1.Calculation:Given,Mean (μ) = 72N (Total number of values) = 387Interval (x) = 64-80 and 56-88Minimum values (n) = 344Minimum percentage (p) = (344 / 387) x 100 = 88.85%From the given data we have,1. Calculate the variance of the distribution,Variance = σ2 = [(n × s2 ) / (n-1)]σ2 = [(344 × 42) / 386]σ2 = 18.732. Calculate the standard deviation of the distribution,σ = √(18.73)σ = 4.33. Calculate k = (|x - μ|) / σ for the given interval 56-88,Here, x1 = 56, x2 = 88, k1 = |56-72| / 4.33 = 3.7, k2 = |88-72| / 4.33 = 3.7Thus, k = 3.74. Calculate the minimum percentage of values within the interval 56-88 using Chebyshev's Theorem,p = [1 - (1/k2)] x 100p = [1 - (1/3.7)2] x 100p = 74.37% (approximately)Therefore, the required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Learn more about Percentage

brainly.com/question/2155156

#SPJ11

Answer:

h = 15 cm

Step-by-step explanation:

Area of triangle equals the area of rectangle. As the dimensions of the rectangle is given, we can first find the area of the rectangle.

      [tex]\boxed{\bf Area \ of \ the \ rectangle = length * width}[/tex]

                                               = 10 * 9

                                               = 90 cm²

Area of triangle = area of rectangle

                          = 90 cm²

base of the triangle = b = 12 cm

 [tex]\boxed{\bf Area \ of \ triangle = \dfrac{1}{2}bh}[/tex]  where h is the altitude and b is the base.

         [tex]\bf \dfrac{1}{2} b* h = 90 \\\\\dfrac{1}{2}*12* h = 90[/tex]

                      [tex]\bf h = \dfrac{90*2}{12}\\\\\boxed{\bf h = 15 \ cm}[/tex]

He bought 4.29 Kilos of fruit.

4+0.29=4.29

Luke bought 4.29 kilograms of fruit in all

Step-by-step explanation:

Simple addition will be used to find the total fruit Luke bought.

Given

Amount of apples he bought  = 4 kilograms

Amount of oranges he bought = 0.29 kilograms

so the total fruit will be:

[tex]\text{total fruit}=\text{Apples}+\text{oranges}[/tex]

[tex]=4+0.29[/tex]

[tex]=4.29[/tex]

So,

Luke bought 4.29 kilograms of fruit in all

Keywords: Measurement, addition

Learn more about addition at:

#LearnwithBrainly

Based on the exponential decay equation, the number of employees for the company that has been decreasing yearly by 5%, will in 10 years be approximately 515.

The exponential decay equation or function gives the value in t years that has a constant ratio of decrease.

Exponential decay equation is one of the two exponential functions.  The other is the exponential growth equation.

The annual decrease in the number of employees = 5%

The current number of employees in the company = 860

The expected time = 10 years.

The exponential decay equation is as follows, y = 860 x 0.95^10.

y = 860 x 0.95^10 = 515

Learn more about exponential functions at https://brainly.com/question/30127596

#SPJ1

a. Yes, the sampling distribution of the sample mean is a normal distribution with a mean of $52000 and a standard error of $\frac{4800}{\sqrt{17}}$.

b. Yes, the sampling distribution of the sample mean is a normal distribution with a mean of $52000 and a standard error of $\frac{4800}{\sqrt{51}}$.

c. You would need to know that the population distribution of X, teacher salaries, is normal in order to answer the questions regarding any sample size.

d. Assuming a sample size of 51, the probability that the sampling error is within $1000 is approximately 0.84 or 84%.

e. Assuming a sample size of 51, the 90th percentile for the average teacher's salary is approximately $54488.

f. Assuming that teacher's salaries are normally distributed, the 90th percentile for an individual teacher's salary is approximately $56396.

Learn more about mean:

https://brainly.com/question/20118982

#SPJ11

The Area of Bella's garden as required to be determined in the task content is the difference of the area of the rectangular backyard and the right triangular fish pond.

It follows from the task content that the area of Bella's trapezoidal garden is to be determined from the given information.

Since the garden and the fish pond are from the rectangular backyard; the sum of their areas is equal to the area of the backyard.

Ultimately, the area of the garden is the difference of the area of the rectangular backyard and the right triangular fish pond.

Read more on difference;

https://brainly.com/question/28368605

$SPJ1

According to the circle theorem, we can find the length of the cord, x = 4 units.

Geometrical assertions known as "circle theorems" set forward significant conclusions pertaining to circles. These theorems provide significant information regarding several aspects of a circle.

A circle's chord is a line segment that hits the circle twice on its edge, separating it into two equal pieces. The circle is divided into two equal pieces by the longest chord of the circle, which runs through its centre.

Here in the given circle,

As per the intersecting chords theorem,

AB × CB= BE × BD

⇒ 6 × 6 = 9× x

⇒ x = 36/9=4

Therefore, the length of the chord, x = 4 units.

To know more about circle theorem, visit:

https://brainly.com/question/19906313

#SPJ1

The slope between the points (-3, 0) and (0, -1) is -1/3.

The slope of a line serves as a gauge for its steepness. It may be calculated by dividing the difference in y-coordinate by the difference in x-coordinate between any two points on a line. A line's slope might be zero, positive, negative, or undefinable. A line with a positive slope is moving upward from left to right, a negative slope is moving downward from left to right, and a line with a zero slope is level. The line is vertical if the slope is undefinable.

Let us consider the first two points (-3, 0) and (0, -1).

The slope of the line is given as:

m = (y2 - y1) / (x2 - x1)

Substituting the values we have:

m = (-1 - 0) / (0 - (-3)) = -1/3

Hence, the slope between the points (-3, 0) and (0, -1) is -1/3.

Learn more about slope of line here:

https://brainly.com/question/11559942

#SPJ1

Answer: To convert the given equation, √y = (6/p)x - (2/q), into the linear form y = mx + c, we can use the following steps:

Square both sides of the equation to eliminate the square root:

√y = (6/p)x - (2/q)

√y^2 = (6/p)x - (2/q)^2

Simplifying the right-hand side, we get:

y = (36/p^2)x - (4/q) + 4/q^2

Rearrange the equation to the form y = mx + c:

y = (36/p^2)x + (4/q^2 - 4/q)

So the linear form of the given non-linear equation is y = (36/p^2)x + (4/q^2 - 4/q).

Step-by-step explanation:

When performing a hypothesis test based on a 95% confidence level, the chances of making a type II error are 5%.

The process of hypothesis testing is used to determine whether or not a given statistical hypothesis is valid. The objective of this method is to determine whether the null hypothesis can be accepted or rejected based on the sample data obtained.

Hypothesis testing can be used to evaluate two hypotheses. The null hypothesis is the one that must be accepted or rejected, while the alternative hypothesis is the one that must be supported. In other words, hypothesis testing is a way of determining whether the null hypothesis is reasonable or not.

The Type II error is defined as the error that occurs when the null hypothesis is not rejected even though it is incorrect. In hypothesis testing, this type of error is referred to as a beta error or a false-negative error. The chances of making a Type II error depend on several factors, including the sample size, the level of significance, and the power of the test. When the level of significance is lowered to 0.05, the chances of making a Type II error are 5%.

To learn more about type II error refer :

https://brainly.com/question/30699536

#SPJ11

Answer: 198 families live farther than 1 mile from the square.

Step-by-step explanation:

We know that there are 238 families that live within 1 mile of the village square. To find the number of families that live farther than 1 mile from the square, we can subtract 238 from the total number of families:

436 - 238 = 198

Therefore, 198 families live farther than 1 mile from the square. We can do this subtraction mentally without needing a calculator.

The zeroes of the function are -12 and 5.

Zeros of a function are the values of the input variables that make the output of the function equal to zero. The zeros are the solutions of equation f(x) = 0.

According to the question:

To find the zeros of the function

f(x) = x² + 7x - 60, we must set f(x) equal to zero and solve for x.

So we start with the equation:

x² + 7x - 60 = 0

Next, we need to factor the left side of the equation. We are looking for two numbers that multiply to -60 and add to 7. After some trial and error, we find that the numbers are 12 and -5:

x² + 7x - 60 = (x + 12)(x - 5) = 0

Now we can apply the zero product property, which states that if the product of two factors is zero, then at least one of the factors must be zero. Therefore, we set each factor equal to zero and solve for x:

x + 12 = 0 or x - 5 = 0

Solving for x, we get:

x = -12 or x = 5

The zeros of the function f(x) = x² + 7x - 60 are therefore x = -12 and x = 5.

To know more about Zeros of the function visit:

brainly.com/question/16633170

#SPJ1

Answer:

b = [tex]\frac{S-2la}{h+l}[/tex]

Step-by-step explanation:

S = bh + lb + 2la ( reversing the equation )

bh + lb + 2la = S ( subtract 2la from both sides )

bh + lb = S - 2la ← factor out b from each term on the left side

b(h + l) = S - 2la ← divide both sides by (h + l)

b = [tex]\frac{S-2la}{h+l}[/tex]

The value of x that makes the average between 3.15 and x equal to 40 is 76.85.

In this problem, we are given two numbers, 3.15 and x, and told that the average between them is 40. We can set up an equation to solve for x as follows:

(3.15 + x) / 2 = 40

To find the average between 3.15 and x, we add the two numbers together and divide by 2, which gives us the equation above.

To solve for x, we can start by multiplying both sides of the equation by 2:

3.15 + x = 80

Next, we can subtract 3.15 from both sides of the equation:

x = 76.85

To know more about average here

https://brainly.com/question/16956746

#SPJ4

Smallest number in the data set that is not an outlier is 15, Median of the first half is 17, Median of the entire data set is 20.5. Median of the second half is 22. Largest number in the data set that is not an outlier is 35.

Give a short note on Median?

In statistics, the median is a measure of central tendency that represents the middle value in a dataset. To find the median, the data must first be sorted in ascending or descending order. If the dataset contains an odd number of values, the median is the middle value. If the dataset contains an even number of values, the median is the average of the two middle values.

The median is a useful measure of central tendency in datasets that are skewed or have outliers, as it is less sensitive to extreme values than the mean. It is also useful in datasets with non-numeric values, such as rankings or survey responses.

To create a modified box plot, we need the following values:

The smallest number in the data set that is not an outlier: 15

The median of the first half of the data set: 17

The median of the entire data set: 20.5

The median of the second half of the data set: 22

The largest number in the data set that is not an outlier: 35

So the values needed to create a modified box plot for this data set are: 15, 17, 20.5, 22, 35.

(a) Point estimate (mean difference): 2.2 tomatoes. (b) The standard deviation of differences: Approximately 3.47. (c) The test statistic: Approximately 1.38.

To perform a t-test for the population mean difference, follow these steps:

(a) Calculate the point estimate (mean difference): The point estimate is the mean difference between the yields of fertilizer A and fertilizer B.

Mean difference = (Sum of differences) / Number of pairs

Using the given data gives:

Mean difference = ((7-4) + (6-7) + (5-6) + (8-5) + (10-3)) / 5

Subtracting gives:

Mean difference = (3 - 1 - 1 + 3 + 7) / 5

Solving gives:

Mean difference = 11 / 5

Dividing gives:

Mean difference = 2.2

(b) Calculate the standard deviation of the differences:

To calculate the standard deviation of the differences, we need to calculate the squared differences, find their sum, divide by (n-1), and then take the square root.

Squared differences:[tex](3 - 2.2)^2, (-1 - 2.2)^2, (-1 - 2.2)^2, (3 - 2.2)^2, (7 - 2.2)^2[/tex]

Solving gives:

Sum of squared differences = (0.64 + 12.96 + 12.96 + 0.64 + 21.16)

Solving gives:

The sum of squared differences = 48.36

The standard deviation of the differences [tex]= \sqrt{48.36 / 4}[/tex]

Solving gives:

The standard deviation of the differences [tex]= \sqrt{2.09}[/tex]

Rounded to three decimal places

The standard deviation of the differences ≈ 3.47

c) Calculate the test statistic:

The test statistic (t) = (Point estimate - Null hypothesis value) / (Standard deviation /√(sample size))

Let's assume the null hypothesis is that there is no difference between the two fertilizers

(i.e., mean difference = 0).

[tex]t = (2.2 - 0) / (3.47 / \sqrt5)[/tex]

Substituting [tex]\sqrt 5 = 2.236[/tex]

t = 2.2 / (3.47 / 2.236)

Rounded to two decimal places

t ≈ 1.378

So, the test statistic is approximately 1.378.

The gardener can compare this test statistic to critical values from the t-distribution to determine whether the difference between the two fertilizers is statistically significant at a certain significance level. If the calculated test statistic is greater than the critical value, she ma

Learn more about t-tests here:

https://brainly.com/question/1189751

#SPJ12

​

Answer:

y-intercept is (0,3) and the slope is 3

Step-by-step explanation:

Answer: the slope is 3x while 3 is the y-intercept.

Step-by-step explanation:

This principle is validated by the data shown in the table.

Tests and measurements is an essential aspect of the education process as it enables educators to gauge the level of knowledge and skills their students have acquired. The principle that longer tests tend to be more reliable than shorter ones has some merit because it allows educators to assess a broader range of skills and knowledge, which increases the validity of their assessments.In my opinion, the principle that longer tests tend to be more reliable than shorter ones is illustrated in the reliability coefficients shown in the table. This is because the data shows that the reliability coefficients for longer tests are consistently higher than those for shorter tests. Additionally, the results for the 10-item test indicate a higher reliability coefficient compared to the 5-item test, which supports the notion that longer tests are more reliable than shorter ones.The table displays that the longer tests have higher reliability coefficients compared to the shorter tests. For example, in the 5-item test, the reliability coefficient is .45, while the 10-item test's reliability coefficient is .73. This shows that the 10-item test is more reliable than the 5-item test, as the higher reliability coefficient indicates that the assessment is consistent in measuring the skill or knowledge it is intended to measure. As a result, this principle is validated by the data shown in the table.

Learn more about principle

brainly.com/question/30388578

#SPJ11

Answer: Associative property

Step-by-step explanation:

The definition of the associative property is the answer is the same no matter how the terms are grouped. Hope this helped!