A system gains 1500J of heat and 2200J of work is done by the system on its surroundings. Determine the change in internal energy of the system
Answer:
-700
formula is heat gained - work done
The change in internal energy if A system gains 1500J of heat and 2200J of work is done by the system on its surroundings, is 700 joules.
What is Energy?Energy is the ability to perform work in physics. It could exist in several different forms, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc.
Additionally, there is heat and work, which is energy being transferred from one body to another. Energy is always assigned based on its nature once it has been transmitted. Thus, heat transmitted may manifest as thermal energy while work performed may result in mechanical energy.
Given:
A system gains 1500J of heat and 2200J of work is done by the system on its surroundings,
Calculate the change in internal energy as shown below,
The change in internal energy = heat gained - work done
The change in internal energy = 1500 - 2200
The change in internal energy = -700 J
Thus, the change in internal energy is 700 joules.
To know more about Energy:
https://brainly.com/question/8630757
#SPJ5
Which physical phenomenon is illustrated by the fact that the prism has different refractive indices for different colors
Answer:
The incoming white light is composed of light of different colors,
Since these different colors have different refractive indices they are refracted at different angles from one another.
The output light is then separated by color creating a color spectrum.
Since n is greater for shorter wavelengths (violet colors) these wavelengths are refracted thru the larger angles.
In 1.0 second, a battery charger moves 0.50 C of charge from the negative terminal to the positive terminal of a 1.5 V AA battery.
Part A:
How much work does the charger do? Answer is 0.75 J
Part B:
What is the power output of the charger in watts?
Answer:
W = Q * V work done on charge Q
A. W = .5 C * 1.5 V = .75 Joules
B. P = W / t = .75 J / 1 sec = .75 Watts
A 10.0 L tank contains 0.329 kg of helium at 28.0 ∘C. The molar mass of helium is 4.00 g/mol . Part A How many moles of helium are in the tank? Express your answer in moles.
Answer:
82.25 moles of He
Explanation:
From the question given above, the following data were obtained:
Volume (V) = 10 L
Mass of He = 0.329 Kg
Temperature (T) = 28.0 °C
Molar mass of He = 4 g/mol
Mole of He =?
Next, we shall convert 0.329 Kg of He to g. This can be obtained as follow:
1 Kg = 1000 g
Therefore,
0.329 Kg = 0.329 Kg × 1000 g / 1 Kg
0.329 Kg = 329 g
Thus, 0.329 Kg is equivalent to 329 g.
Finally, we shall determine the number of mole of He in the tank. This can be obtained as illustrated below:
Mass of He = 329 g
Molar mass of He = 4 g/mol
Mole of He =?
Mole = mass / molar mass
Mole of He = 329 / 4
Mole of He = 82.25 moles
Therefore, there are 82.25 moles of He in the tank.
A room has dimensions of 15 ft by 15 ft by 20 ft contains air with a density of 0.0724 pounds-mass per cubic feet. The weight of air in the room in pounds-force is
Answer:
the weight of the air in pound-force (lb-f) is 325.8 lbf
Explanation:
Given;
dimension of the room, = 15 ft by 15 ft by 20 ft
density of air in the room, ρ = 0.0724 lbm/ft³
The volume of air in the room is calculated as;
Volume = 15 ft x 15 ft x 20 ft = 4,500 ft³
The mass of the air is calculated as;
mass = density x volume
mass = 0.0724 lbm/ft³ x 4,500 ft³
mass = 325.8 lb-m
The weight of the air is calculated as;
Weight = mass x gravity
Weight = 325.8 lb-m x 32.174 ft/s²
Weight = 10482.29 lbm.ft/s²
The weight of the air in pound-force (lb-f) is calculated as;
1 lbf = 32.174 lbm.ft/s²
[tex]Weight =10,482.29\ lbm.ft/s^2\times \frac{1 \ lbf}{32.174 \ lbm.ft/s^2} \\\\Weight = 325.8 \ lbf[/tex]
Therefore, the weight of the air in pound-force (lb-f) is 325.8 lbf
190 students sit in an auditorium listening to a physics lecture. Because they are thinking hard, each is using 125 W of metabolic power, slightly more than they would use at rest. An air conditioner with a COP of 5.0 is being used to keep the room at a constant temperature. What minimum electric power must be used to operate the air conditioner?
Answer:
W = 4.75 KW
Explanation:
First, we will calculate the heat to be removed:
Q = (No. of students)(Metabolic Power of Each Student)
Q = (190)(125 W)
Q = 23750 W = 23.75 KW
Now the formula of COP is:
[tex]COP = \frac{Q}{W}\\\\W = \frac{Q}{COP}\\\\W = \frac{23.75\ KW}{5}\\\\[/tex]
W = 4.75 KW
The cable lifting an elevator is wrapped around a 1.1m diameter cylinder that is turned by the elevator's motor. The elevator is moving upward at a speed of 2.6 ms. It then slows to a stop, while the cylinder turns one complete revolution. How long does it take for the elevator to stop? Express your answer to two significant figures and include the appropriate units.
Answer:
t = 2.7 s
Explanation:
This is a kinematics problem.
How the elevator reduces its speed to zero by a distance equal to the length of the cylinder
y = 2π r = 2 π d / 2
y = π d
y = π 1.1
y = 3,456 m
now we can look for the acceleration of the system
v² = v₀² - 2 a y
0 = v₀² - 2 a y
a = v₀² / 2y
a = 2.6² / 2 3.456
a = 0.978 m / s²
now let's calculate the time
v = v₀ - a t
0 = v₀ - at
t = v₀ / a
t = 2.6 /0.978
t = 2.658 s
ask for the result with two significant figures
t = 2.7 s
if Petrol diesel etc catches fire one should never try to extinguish in using water why?
Answer:
because both petrol and diesel are oil
Explanation:
oil floats on water that's why if we will try to extinguish with water so the fire will float on water
hope u like my answer
please mark methe brainest
Which best describes the relationship between heat,intemal energy, and thermal energy?
Internal energy is heat that flows and heat is the part of thermal energy that can be transferred
Internal energy is thermal energy that flows, and thermal energy is the part of heat that can be transferred,
Thermal energy is heat that flows, and heat is the part of intemal energy that can be transferred
Heat is thermal energy that flows, and hennal energy is the part of internal energy that can be transferred.
Answer:
It is all a thermodynamic system that is highly related to each other.
Explanation:
Because they are in the physics of thermodynamics it is not wrong to say they follow the same thermodynamic rules and has highly the same properties of energy.
PLZ help asap :-/
............................
Explanation:
[16][tex]\underline{\boxed{\large{\bf{Option \; A!! }}}} [/tex]
Here,
[tex]\rm { R_1} [/tex] = 2Ω[tex]\rm { R_2} [/tex] = 2Ω[tex]\rm { R_3} [/tex] = 2Ω[tex]\rm { R_4} [/tex] = 2ΩWe have to find the equivalent resistance of the circuit.
Here, [tex]\rm { R_1} [/tex] and [tex]\rm { R_2} [/tex] are connected in series, so their combined resistance will be given by,
[tex]\longrightarrow \rm { R_{(1,2)} = R_1 + R_2} \\ [/tex]
[tex]\longrightarrow \rm { R_{(1,2)} = (2 + 2) \; Omega} \\ [/tex]
[tex]\longrightarrow \rm { R_{(1,2)} = 4 \; Omega} \\ [/tex]
Now, the combined resistance of [tex]\rm { R_1} [/tex] and [tex]\rm { R_2} [/tex] is connected in parallel combination with [tex]\rm { R_3} [/tex], so their combined resistance will be given by,
[tex]\longrightarrow \rm {\dfrac{1}{ R_{(1,2,3)}} = \dfrac{1}{R_{(1,2)}} + \dfrac{1}{R_3} } \\ [/tex]
[tex]\longrightarrow \rm {\dfrac{1}{ R_{(1,2,3)}} = \Bigg ( \dfrac{1}{4} + \dfrac{1}{2} \Bigg ) \;\Omega} \\ [/tex]
[tex]\longrightarrow \rm {\dfrac{1}{ R_{(1,2,3)}} = \Bigg ( \dfrac{1 + 2}{4} \Bigg ) \;\Omega} \\ [/tex]
[tex]\longrightarrow \rm {\dfrac{1}{ R_{(1,2,3)}} = \Bigg ( \dfrac{3}{4} \Bigg ) \;\Omega} \\ [/tex]
Reciprocating both sides,
[tex]\longrightarrow \rm {R_{(1,2,3)}= \dfrac{4}{3} \;\Omega} \\ [/tex]
Now, the combined resistance of [tex]\rm { R_1} [/tex], [tex]\rm { R_2} [/tex] and [tex]\rm { R_3} [/tex] is connected in series combination with [tex]\rm { R_4} [/tex]. So, equivalent resistance will be given by,
[tex]\longrightarrow \rm {R_{(1,2,3,4)}= R_{(1,2,3)} + R_4} \\ [/tex]
[tex]\longrightarrow \rm {R_{(1,2,3,4)}= \Bigg ( \dfrac{4}{3} + 2 \Bigg ) \; \Omega} \\ [/tex]
[tex]\longrightarrow \rm {R_{(1,2,3,4)}= \Bigg ( \dfrac{4 + 6}{3} \Bigg ) \; \Omega} \\ [/tex]
[tex]\longrightarrow \rm {R_{(1,2,3,4)}= \Bigg ( \dfrac{10}{3} \Bigg ) \; \Omega} \\ [/tex]
[tex]\longrightarrow \bf {R_{(1,2,3,4)}= 3.33 \; \Omega} \\ [/tex]
Henceforth, Option A is correct.
_________________________________[17][tex]\underline{\boxed{\large{\bf{Option \; B!! }}}} [/tex]
Here, we have to find the amount of flow of current in the circuit. By using ohm's law,
[tex] \longrightarrow [/tex] V = IR
[tex] \longrightarrow [/tex] 3 = I × 3.33
[tex] \longrightarrow [/tex] 3 ÷ 3.33 = I
[tex] \longrightarrow [/tex] 0.90 Ampere = I
Henceforth, Option B is correct.
____________________________[tex] \tt \purple{Hope \; it \; helps \; you, Army! \heartsuit } \\ [/tex]
Which one is the better material to use for an inexpensive compass? hard iron, soft iron, or any conductor
Answer:
Soft iron
Explanation:
A particle charge of 2.7 µC is at the center of a Gaussian cube 55 cm on edge. What is the net electric flux through the surface?
Answer:
3.05×10⁵ Nm²C⁻¹
Explanation:
According to Gauss' law,
∅' = q/e₀............... Equation 1
Where ∅' = net flux through the surface, q = net charge, e₀ = electric permittivity of the space
From the question,
Given: q = 2.7 μC = 2.7×10⁻⁶ C,
Constant: e₀ = 8.85×10⁻¹² C²/N.m²
Substituting these values into equation 1
∅' = (2.7×10⁻⁶)/(8.85×10⁻¹²)
∅' = 3.05×10⁵ Nm²C⁻¹
An electrostatic paint sprayer has a 0.100 m diameter metal sphere at a potential of 30.0 kV that repels paint droplets onto a grounded object. (a) What charge (in C) is on the sphere?(b) What charge must a 0.100-mg drop of paint have to arrive at the object with a speed of 10.0 m/s?
Answer:
A) q = 1.67 × 10^(-7) C
B) q = 1.67 × 10^(-10) C
Explanation:
We are given;
Potential; V = 30 KV = 30000 V
Radius of sphere; r = diameter/2 = 0.1/2 = 0.05 m
A) To find the charge of the sphere, we will use the formula;
V = kq/r
Where;
q is the charge
k is electric force constant = 9 × 10^(9) N.m²/C²
Thus;
q = Vr/k
q = (30000 × 0.05)/(9 × 10^(9))
q = 1.67 × 10^(-7) C
B) Now, potential energy here is a formula; U = qV
However, for the drop of paint to move, the potential energy will be equal to the kinetic energy. Thus;
qV = ½mv²
q = mv²/2V
Where;
v is speed = 10 m/s
V = 30000 V
m = mass = 0.100 mg = 0.1 × 10^(-6) Thus;
q = (0.1 × 10^(-6) × 10²)/(2 × 30000)
q = 1.67 × 10^(-10) C
The working substance of a certain Carnot engine is 1.50 mol of an ideal monatomic gas. During the isothermal expansion portion of this engine's cycle, the volume of the gas doubles, while during the adiabatic expansion the volume increases by a factor of 5.7. The work output of the engine is 940 J in each cycle. Compute the temperatures of the two reservoirs between which this engine
operates.
Answer:
The hot temperature is 157.5 K
The cold temperature is 48.8 K
Explanation:
Step 1: Data given
The working substance of a certain Carnot engine is 1.50 mol of an ideal monatomic gas.
The volume increases by a factor of 5.7
The work output of the engine is 940 J in each cycle.
During the isothermal expansion portion of this engine's cycle, the volume of the gas doubles. This means V2 = 2*V1 (and V4 = 2*V3)
Step 2:For a carnot engine:
V2/V1 = V4/V3
Work = nR((T1)ln(V2/V1) - (T2)ln(V4/V3))
⇒with Work = the work done in the cycle = 940J
⇒with n = the number of moles = 1.50 moles
⇒with R = the gas constant = 8.314 J/mol*K
⇒with T1 = the hot temperature
⇒With T2⇒ the cold temperature
where R = 8.31 J/mol K Gas Constant
940J = 1.5moles * 8.314 J/mol*K * (T1*ln(2) - T2*ln(2)))
940 = 1.5 * 8.314 ln(2) * (T1-T2)
(T1-T2) = 940 / (1.5*8.314*ln(2))
(T1-T2) = 108.7K
For the reversible adiabatic expansion: T2 = T1*(V1/V2)^(R/Cv). Where V2/V1 = 5.7 (Because during the adiabatic expansion the volume increases by a factor of 5.7)
For a monatomic ideal gas, Cv = 3/2R
When we combine both, we'll have:
T2 = T1*(1/5.7)^(R/3/2R)
T2 = T1*(1/5.7)^(2/3)
T2= T1 * 0.31
Since we know that (T1-T2) = 108.7K
we have:
T1 - 0.31T1= 108.7K
0.69T1 = 108.7K
T1 = 157.5K
T2 = 157.5*0.31 = 48.8K
Drawing a shows a displacement vector (450.0 m along the y axis). In this x, y coordinate system the scalar components are Ax 0 m and Ay 450.0 m. Suppose that the coordinate system is rotated counterclockwise by 35.0, but the magnitude (450.0 m) and direction of vector remain unchanged, as in drawing b. What are the scalar components, Ax and Ay, of the vector in the rotated x, y coordinate system
Answer:
x ’= 368.61 m, y ’= 258.11 m
Explanation:
To solve this problem we must find the projections of the point on the new vectors of the rotated system θ = 35º
x’= R cos 35
y’= R sin 35
The modulus vector can be found using the Pythagorean theorem
R² = x² + y²
R = 450 m
we calculate
x ’= 450 cos 35
x ’= 368.61 m
y ’= 450 sin 35
y ’= 258.11 m
You walk into a room and you see 4 chickens on a bed 2 cows on the floor and 2 cats in a chair. How many legs are on the ground? (I know this answer just a riddle to see who knows it) (:
Answer:
18
Explanation:
I'm pretty sure I got it right
Your cell phone typically consumes about 300 mW of power when you text a friend. If the phone is operated using a lithium-ion battery with a voltage of 3.5 V, what is the current (in A) flowing through the cell-phone circuitry under these circumstances
Answer:
I = 0.0857 A
Explanation:
Given that,
Power consumed by the cellphone, P = 300 mW
The voltage of the battery, V = 3.5 V
Let I is the current flowing through the cell-phone. We know that,
P = VI
Where
I is the current
So,
[tex]I=\dfrac{P}{V}\\\\I=\dfrac{300\times 10^{-3}}{3.5}\\\\I=0.0857\ A[/tex]
So, the current flowing the cell-phone is 0.0857 A.
A spacecraft on its way to Mars has small rocket engines mounted on its hull; one on its left surface and one on its back surface. At a certain time, both engines turn on. The one on the left gives the spacecraft an acceleration component in the x direction of
ax = 5.10 m/s2,
while the one on the back gives an acceleration component in the y direction of
ay = 7.30 m/s2.
The engines turn off after firing for 670 s, at which point the spacecraft has velocity components of
vx = 3670 m/s and vy = 4378 m/s.
What was the magnitude and the direction of the spacecraft's initial velocity before the engines were turned on? Express the magnitude as m/s and the direction as an angle measured counterclockwise from the +x axis.
magnitude m/s
direction ° counterclockwise from the +x-axis
Answer:
a) v = 517.99 m / s, b) θ = 296.3º
Explanation:
This is an exercise in kinematics, we are going to solve each axis independently
X axis
the acceleration is aₓ = 5.10 1 / S², they are on for t = 670 s and reaches a speed of vₓ= 3670 m / s, let's use the relation
vₓ = v₀ₓ + aₓ t
v₀ₓ = vₓ - aₓ t
v₀ₓ = 3670 - 5.10 670
v₀ₓ = 253 m / s
Y axis
the acceleration is ay = 7.30 m / s², with a velocity of 4378 m / s after
t = 670 s
v_y = v_{oy} + a_y t
v_{oy} = v_y - a_y t
v_oy} = 4378 - 7.30 670
v_{oy} = -513 m / s
to find the velocity modulus we use the Pythagorean theorem
v = [tex]\sqrt{v_o_x^2 + v_o_y^2}[/tex]
v = [tex]\sqrt{253^2 +513^2}[/tex]
v = 517.99 m / s
to find the direction we use trigonometry
tan θ ’= [tex]\frac{v_o_y}{v_o_x}[/tex]
θ'= tan⁻¹ [tex]\frac{voy}{voy}[/tex]
θ'= tan⁻¹ (-513/253)
tea '= -63.7
the negative sign indicates that it is below the ax axis, in the fourth quadrant
to give this angle from the positive side of the axis ax
θ = 360 - θ
θ = 360 - 63.7
θ = 296.3º
Two charged particles exert an electric force of 27 N on each other. What will the magnitude of the force be if the distance between the particles is reduced to one-third of the original separation
Answer:
243 N
Explanation:
The formula for electromagnetic force is F= Kq1q2/r^2
where r is the distance between the charges, if the distance between the charges is reduced by 1/3 then F will increase by 9 [(1/3r)^2 becomes 1/9r which is 9F] so 27*9 is 243N
An electric lamp consumes 60W at 220 volts. How many dry cells of 1.5 V and internal resistance 1 Ohm are required to glow the lamp?
Answer:
1. Number of dry cells of 1.5 V required is 40.
2. Number of internal resistance of 1 ohm required is 807
Explanation:
We'll begin by calculating the resistance. This can be obtained as follow:
Power (P) = 60 W
Voltage (V) = 220 V
Resistance (R) =?
P = V²/R
60 = 220² / R
Cross multiply
60 × R = 220²
60 × R = 48400
Divide both side by 60
R = 48400 / 60
R ≈ 807 Ohm
1. Determination of the number of dry cells of 1.5 V required.
Voltage (V) = 220
Dry Cells = 1.5 V
Number of dry cells (n) =?
n = Voltage / Dry cells
n = 60 / 1.5
n = 40
2. Determination of the number of internal resistance of 1 ohm required.
Resistance (R) = 807 Ohm
Internal resistance (r) = 1 ohm
Number of internal resistance (n) =?
n = R/r
n = 807 / 1
n = 807
SUMMARY:
1. Number of dry cells of 1.5 V required is 40.
2. Number of internal resistance of 1 ohm required is 807
Soap bubble coloring example:
(reflection, interference, refraction, diffraction)
Explanation:
Interference is the example of soap bubble colouringEXTRA INFO:(LOOK AT THE IMAGE)
An incoming light ray is partly reflected by the top surface of the soap film and partly reflected by the bottom surface. The wave reflected from the bottom surface has traveled further (an extra distance equal to twice the thickness of the film) so emerges out of step with the top wave. When the two waves meet, they add together, and some colors are removed by destructive interference. Where the film is thickest, the bubble appears more blueish; where it's thinner, it will look more violet or magenta.
[tex]\huge\bold\color{black}{ANSWER}[/tex]
Soap bubble coloring example: INTERFERENCE
A bullet with mass 5.35 g is fired horizontally into a 2.174-kg block attached to a horizontal spring. The spring has a constant 6.17 102 N/m and reaches a maximum compression of 6.34 cm.
(a) Find the initial speed of the bullet-block system.
(b) Find the speed of the bullet.
Answer:
a)[tex]V=1.067\: m/s[/tex]
b)[tex]v=434.65\: m/s [/tex]
Explanation:
a)
Using the conservation of energy between the moment when the bullet hit the block and the maximum compression of the spring.
[tex]\frac{1}{2}MV^{2}=\frac{1}{2}k\Delta x^{2}[/tex]
Where:
M is the bullet-block mass (0.00535 kg + 2.174 kg = 2.17935 kg)V is the speed of the systemk is the spring constant (6.17*10² N/m)Δx is the compression of the spring (0.0634 m)Then, let's find the initial speed of the bullet-block system.
[tex]V^{2}=\frac{k\Delta x^{2}}{M}[/tex]
[tex]V=\sqrt{\frac{6.17*10^{2}*0.0634^{2}}{2.17935}}[/tex]
[tex]V=1.067\: m/s[/tex]
b)
Using the conservation of momentum we can find the velocity of the bullet.
[tex]mv=MV[/tex]
[tex]v=\frac{MV}{m}[/tex]
[tex]v=\frac{2.17935*1.067}{0.00535}[/tex]
[tex]v=434.65\: m/s [/tex]
I hope it helps you!
a nano second is what
Answer:
one thousand-millionth of a second.
A nanosecond is an SI unit of time equal to one billionth of a second, that is, ¹⁄₁ ₀₀₀ ₀₀₀ ₀₀₀ of a second, or 10⁻⁹ seconds. The term combines the prefix nano- with the basic unit for one-sixtieth of a minute. A nanosecond is equal to 1000 picoseconds or ¹⁄₁₀₀₀ microsecond.
For a research project, a student needs a solenoid that produces an interior magnetic field of 0.0100 T. She decides to use a current of 1.00 A and a wire 0.500 mm in diameter. She winds the solenoid in layers on an insulating form 1.00 cm in diameter and 20.0 cm long.
Determine the number of layers of wire needed. (Round your answer up to the nearest integer.)
Determine the total length of the wire. (Use the integer number of layers and the average layer diameter.)
Answer:
[tex]n=3.8[/tex]
Explanation:
From the question we are told that:
Magnetic Field [tex]B=0.01T[/tex]
Current [tex]I=1.00[/tex]
Wire Diameter [tex]d_w=0.5*10^3m[/tex]
Layers Diameter [tex]d_l=1*10^2m[/tex]
Length [tex]l=0.2m[/tex]
Generally the equation for number of layers is mathematically given by
[tex]n=\frac{Bd_w}{\mu_o I}[/tex]
Where
[tex]Vacuum\ permeability=\mu_0[/tex]
[tex]n= \frac{0.01*0.5*10^3m}{4 \pi *10^{-7}*1 }[/tex]
[tex]n=3.8[/tex]
Container A and container B hold samples of the same ideal gas. The volume and the pressure of container A is equal to the volume and pressure of container B, respectively. If Container A has half as many molecules of the ideal gas in it as Container B does, then which of the following mathematical statements is correct regarding the absolute temperatures TA and TB in Container A and Container B. respectively?
A. TA = TB/2.
B. TA = 4TB.
C. TA = TB/4.
D. TA = 2TB.
E. TA = TB
Answer:
A. TA = TB/2.
Explanation:
Since container A has half as many molecules of the ideal gas in it as container B. Therefore, container A will have half the volume of gas as in container B:
[tex]V_A = \frac{1}{2}V_B[/tex]
Now, from Charle's Law:
[tex]\frac{V_A}{T_A}=\frac{V_B}{T_B}\\\\\frac{1}{2}\frac{V_B}{T_A}=\frac{V_B}{T_B}\\\\T_A = \frac{T_B}{2}[/tex]
Hence, the correct option is:
A. TA = TB/2.
Part B
What is the approximate amount of thrust you need to apply to the lander to keep its velocity roughly constant? Explain why, using Newton's first
law of motion.
Answer:
Force is zero.
Explanation:
According to the Newton's second law, when an object is moving with an acceleration the force acting on the object is directly proportional to the rate of change of momentum of the object.
F = m a
if the object is moving with uniform velocity, the acceleration is zero, and thus, the force is also zero.
Answer: Near the moon’s surface, a thrust over 11,250 N but under 13,500 N would make it travel at a constant vertical velocity.
Explanation: .Newton’s first law of motion states that an object in motion continues to move in a straight line at a constant velocity unless acted upon by an unbalanced force. In accordance with this law, the lunar lander moves in a downward direction toward the surface of the moon under the influence of force due to gravity. A thrust somewhere between 11,250 and 13,500 balances this gravitational force out.
Suppose oil spills from a ruptured tanker and spreads in a circular pattern. If the radius of the oil spill increases at a constant rate of 2 m/s, exactly how fast (in m2/s) is the area of the spill increasing when the radius is 39 m?
Explanation:
The area of a circle of radius r is given by
[tex]A = \pi r^2[/tex]
Taking the derivative of A with respect to time t, we get
[tex]\dfrac{dA}{dt} = 2\pi r \dfrac{dr}{dt}[/tex]
We also know that
[tex]\dfrac{dr}{dt} = 2\:\text{m/s}\:\text{at}\:r = 39\:\text{m}[/tex]
[tex]\dfrac{dA}{dt} = 2\pi (39\:\text{m})(2\:\text{m/s})= 490\:\text{m}^2\text{/s}[/tex]
Q 26.12: Assume current flows in a cylindrical conductor in such a way that the current density increases linearly with radius, from zero at the center to 1.0 A/m2 at the surface of the conductor. If the conductor has a cross sectional area of 1.0 m2, what can you say about the current in this conductor
Answer:
The current is 0.67 A.
Explanation:
Density, J = 1 A/m^2
Area, A = 1 m^2
Let the radius is r. And outer is R.
Use the formula of current density
[tex]I = \int J dA = \int J 2\pi r dr\\\\I = \int_{0}^{R}\frac{2\pi r^2}{R} dr\\\\I = \frac{2 \pi R^2}{3}.... (1)Now A = \pi R^2\\\\1 =\pi R^2\\\\R^2 = \frac{1}{\pi}\\\\So, \\\\I = \frac{2\pi}{3}\times \frac{1}{\pi}\\\\I = 0.67 A[/tex]
Find a parametric representation for the surface. The plane through the origin that contains the vectors i - j and j - k
Answer:
parametric representation: x = u, y = v - u , z = - v
Explanation:
Given vectors :
i - j , j - k
represent the vector equation of the plane as:
r ( u, v ) = r₀ + ua + vb
where: r₀ = position vector
u and v = real numbers
a and b = nonparallel vectors
expressing the nonparallel vectors as :
a = i -j , b = j - k , r = ( x,y,z ) and r₀ = ( x₀, y₀, z₀ )
hence we can express vector equation of the plane as
r(u,v) = ( x₀ + u, y₀ - u + v, z₀ - v )
Finally the parametric representation of the surface through (0,0,0) i.e. origin = 0
( x, y , z ) = ( x₀ + u, y₀ - u + v, z₀ - v )
x = 0 + u ,
y = 0 - u + v
z = 0 - v
∴ parametric representation: x = u, y = v - u , z = - v
A 2.0 kg wood block is launched up a wooden ramp that is inclined at a 30˚ angle. The block’s initial speed is 10 m/s. What vertical height does the block reach above its starting point? Use the coefficients μk=0.20 andμs=0.50.
Answer:
The wood block reaches a height of 4.249 meters above its starting point.
Explanation:
The block represents a non-conservative system, since friction between wood block and the ramp is dissipating energy. The final height that block can reach is determined by Principle of Energy Conservation and Work-Energy Theorem. Let suppose that initial height has a value of zero and please notice that maximum height reached by the block is when its speed is zero.
[tex]\frac{1}{2}\cdot m \cdot v^{2} = m \cdot g\cdot h + \mu_{k}\cdot m\cdot g\cdot s \cdot \sin \theta[/tex]
[tex]\frac{1}{2}\cdot v^{2} = g\cdot h + \mu_{k}\cdot g\cdot \left(\frac{h}{\sin \theta} \right)\cdot \sin \theta[/tex]
[tex]\frac{1}{2}\cdot v^{2} = g\cdot h +\mu_{k}\cdot g\cdot h[/tex]
[tex]\frac{1}{2}\cdot v^{2} = (1 +\mu_{k})\cdot g\cdot h[/tex]
[tex]h = \frac{v^{2}}{2\cdot (1 + \mu_{k})\cdot g}[/tex] (1)
Where:
[tex]h[/tex] - Maximum height of the wood block, in meters.
[tex]v[/tex] - Initial speed of the block, in meters per second.
[tex]\mu_{k}[/tex] - Kinetic coefficient of friction, no unit.
[tex]g[/tex] - Gravitational acceleration, in meters per square second.
[tex]m[/tex] - Mass, in kilograms.
[tex]s[/tex] - Distance travelled by the wood block along the wooden ramp, in meters.
[tex]\theta[/tex] - Inclination of the wooden ramp, in sexagesimal degrees.
If we know that [tex]v = 10\,\frac{m}{s}[/tex], [tex]\mu_{k} = 0.20[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then the height reached by the block above its starting point is:
[tex]h = \frac{\left(10\,\frac{m}{s} \right)^{2}}{2\cdot (1+0.20)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}[/tex]
[tex]h = 4.249\,m[/tex]
The wood block reaches a height of 4.249 meters above its starting point.
