A train 90m long stops in a train station with its front buffers in line with a lamp post on the platform. Later it starts off with an average acceleration of 0.45m/s. What will be its speed in kilometers per hour when the tail buffers pass the lamp post P?​

Answers

Answer 1

Answer:

The speed of the train when the tail buffers pass the lamp post is 9 m/s

Explanation:

The given parameters are;

The length of the train = 90 m

The initial velocity of the train, u = 0

The average acceleration of the train, a = 0.45 m/s²

When the tail buffer pass the lamp post, P, we have;

The distance travelled, s = The length of the train = 90 m

The kinematic equation of motion is given as follows;

v² = u² + 2·a·s

Where;

v = The speed of the train when the tail buffers pass the lamp post

∴ v² = 0² + 2 × 0.45 m/s² × 90 m = 81 m²/s²

Therefore;

v = √(81 m²/s²) = 9 m/s

The speed of the train when the tail buffers pass the lamp post, v = 9 m/s.


Related Questions

Logam P dan Q sejenis. Logam P yang memiliki panjang 1 meter dipanaskan hingga mengalami kenaikan suhu 12ºC, akibatnya logam bertambah panjang 0,2 cm. Logam Q juga dipanaskan hingga mengalami kenaikan suhu 10°C dan panjangnya bertambah 0,1 cm. Tentukanlah panjang mula-mula logam Q!​

Answers

Answer:

I don't know ???

sorry


Write the dirference between sl system
and cgs system

Answers

Explanation:

st system:the internationak system of measurement which i declared form internationäl convention of scientists held in france in 1960AD is Si system

CGS System:it measure in length in centimeter mass in gram time in second

Un globo contiene 4 moles de un gas ideal con un volúmen de 5,0 L. Si se agregan 8 moles adicionales del gas a presión y temperatura constantes, ¿Cuál será el volumen final del globo? - ¿Cuál es la densidad (en g / L) de un gas con una masa molar de 60 g / mol a 0,75 atm y 27 ° C?

Answers

Tenemos un problema de termodinamica sobre gases ideales, los cuales pueden ser descritos por la ecuación de estado del gas ideal

[tex]P*V = n*R*T[/tex]

donde:

P = presión

V = volumen

n = número de moles

R = constante de los gases

T = temperatura.

1) Para el primer problema podemos pensar que el gas dentro del globo es un gas ideal:

Originalmente sabemos que n = 4 y V = 5.0 L

Entonces tendremos:

[tex]P*(5.0 L) = (4 moles)*R*T[/tex]

Ahora decidimos agregar 8 moles más, dejando constante la presión y la temperatura, entonces podemos reescribir la ecuación de arriba como:

(5.0L)/(4 moles) = R*T/P

Y como R, T y P son constantes, entonces:

R*T/P es una constante.

Esto quiere decir que cuando agreguemos 8 moles, para tener un total de 12 moles, tendremos que:

V'/(12 moles) = R*T/P = (5.0L)/(4 moles)

Donde V' es el nuevo volumen final del globo, y es lo que queremos obtener.

V'/(12 moles) =  (5.0L)/(4 moles)

V' =   (5.0L)*(12 moles)/(4 moles) = (5.0 L)*3 = 15.0 L

2) Queremos obtener la densidad en gramos sobre litro de un gas con una masa molar de 60g/mol, a P = 0.75 atm y T = 25°C.

Primero pasemos la temperatura a grados kelvin:

T = 25°C = (25 + 273.15)°K = 298.15°K

Planteamos la ecuación del gas ideal:

[tex]P*V = n*R*T[/tex]

reemplazando R = 0.082 (atm*L/mol*k), además de la presión y la temperatura para un solo mol de gas:

[tex](0.75 atm)*V = (1 mol)*(0.082 (atm*L/mol*k))*(298.15°K)[/tex]

Resolviendo para V obtenemos que:

 

[tex]V = (1 mol)*(0.082 (atm*L/mol*k))*(298.15°K)/(0.75 atm) = 32.597 L[/tex]

Así, vemos que un mol de este gas ocupa un volumen de  32.597 L

Y también sabemos que un mol de este gas pesa 60 gramos.

Recordando que la densidad es el cociente entre la masa y el volumen, podemos ver que la densidad del gas será:

[tex]d = 60g/(32.597 L) = 1.84 g/L[/tex]

Si deseas leer mas sobre el tema, podes ver:

https://brainly.com/question/18528542

Convert 400 mm to m using the method of dimensional analysis

Answers

Answer:

To convert 400 mm to m you can apply the formula [m] = [mm] / 1000; use 400 for mm. Thus, the conversion 400 mm m is the result of dividing 400 by 1000. 0.4

PLEASE MARK AS BRAINLIEST ANSWER

Why does the weight of a body differ on different celestial bodies of the universe?​

Answers

An object's weight is dependent on its mass and how strongly gravity pulls on it. The strength of gravity depends on how far away one object is from another.

Which of the elements below have seven electrons in their outermost energy levels? A.) Cr, Mn, and Fe B.) Br, I, and Ci C.) O, S, and Se D.) He, Ne, and Ar

Answers

Answer:

B

Explanation:

the Halogen families have 7 valence electrons

if a person buys 10 kg apples in himalayan region and sells in terai region will he get profit or loss. why?​

Answers

Answer:

he will be in profit

Explanation:

Himalayan region are high above the sea level so the gravity will be less there compared to the Terai region

Terai lies way below he Himalayan region so the pull of gravity will be more compared to Himalayan region

that's why he will be in profit but not loss

Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude​

Answers

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ F₁) + (F₁ F₂) = F₁ F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

In nonequilibrium, total counterclockwise moments = total clockwise moments. *True False

Answers

Answer:

[tex]{ \bf{false}}[/tex]

Explanation:

Because it breaks the law of moments.

a motorcycle covers 500 meters in 25 seconds. calculate the average velocity​

Answers

Vtb xe máy là:

v=s : t= 500 : 25=20(m/s)

Un auto se desplaza por una carretera recta a una velocidad de 85 km/h. Al cabo de 2 horas, ¿qué distancia habrá recorrido, en metros?

Answers

Answer:

Distancia, D = 170,000 metros

Explanation:

Dados los siguientes datos;

Velocidad = 85 km/h Tiempo = 2 horas

Para encontrar la distancia recorrida, en metros;

Matemáticamente, la distancia recorrida por un objeto se calcula mediante la fórmula;

Distancia = velocidad * tiempo

Sustituyendo los valores en la fórmula, tenemos;

Distancia = 85 * 2

Distancia = 170 kilómetros

A continuación, convertiríamos el valor en kilómetros a metros;

Conversión:

1 kilómetros = 1000 metros

170 kilómetros = D metros

Multiplicación cruzada, tenemos;

D = 170 * 1000

D = 170,000 metros

Por lo tanto, habría viajado 170,000 metros después de 2 horas.

why is it important to have regular super vision of the weights and the measurements in the market?

Answers

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

Which of the globes in Figure 7.9 will light up?

Answers

I believe it would be A because that’s the only one that seems to complete the circuit.

A train travels 600 kilometers in 1 hour. What is the train's velocity in meters/second?

Answers

here's the answer to your question

derive an expression for resistivity of conductor of length l and area of cross section A​

Answers

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

The first periodic table of elements Mendeleev created contained only 70 elements. True or false?

Answers

Explanation:

FALSE

The first periodic table of elements Mendeleev created contained 63 elements.

define one standard kg ​

Answers

Answer:

The mass of platinum iridium rod whose diameter and height are equal an kept at international bureau of weight and measurement in Paris of France is called as one standard kg.

What is Plancks Constant? Need it ASAP

Answers

Answer:

The Planck constant, or Planck's constant, is a fundamental physical constant denoted h, and is of fundamental importance in quantum mechanics. A photon's energy is equal to its frequency multiplied by the Planck constant. Due to mass–energy equivalence, the Planck constant also relates mass to frequency.

Theory:

Planck postulated that the energy of light is proportional to the frequency, and the constant that relates them is known as Planck's constant (h). His work led to Albert Einstein determining that light exists in discrete quanta of energy, or photons.

E = hf

[tex] \sf \: h = 6.626 \times {10}^{ - 34} \: kg \: {m}^{2} {s}^{ - 1} [/tex]


4 A student says that he has made a magnetic field with some iron filings. What would
you say to him?

Answers

Answer:

Yes but no

Explanation:

Here the kid cant say that he has created s magnetic field as iron fillings do not have magnetic properties

An airplane flying at 116 m/s. E, is accelerated uniformly at the rate of 9.2 m/s2, E, for 13 s. What is its final velocity in m/s?

Answers

Answer:

235.6m/s

Explanation:

you have to use one of the kinematic formulas the best that suits the question given in this case you can use v=u+at.since the time, acceleration and initial velocity have been given in the question

v=116+(9.2)13^2

v=116+119.6

=235.6m/s

I hope this helps

why is the fuse used in a circuit called safety fuse?

Answers

Answer:

The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device

Answer:

The guy above me is right

Explanation:

A certain superconducting magnet in the form of a solenoid of length 0.28 m can generate a magnetic field of 7.0 T in its core when its coils carry a current of 80 A. The windings, made of a niobium-titanium alloy, must be cooled to 4.2 K. Find the number of turns in the solenoid.

Answers

Answer:

The number of turns in the solenoid is 19506.

Explanation:

Length of solenoid, L = 0.28 m

Magnetic field, B = 7 T

Current, I = 80 A

Let the number of turns is N.

The formula used to find the magnetic field is

[tex]B = \frac{\mu 0N I}{L}\\\\7 = \frac{4 \times 3.14\times 10^{-7}\times N\times 80}{0.28}\\\\N = 19506[/tex]

What do is mean by environment friendly behaviour?​

Answers

Answer:
Being environmentally friendly means having a lifestyle that is better for the environment

Which statement best describes the arrangement of electrons in an atom of fluorine (F)?

(1 point) giving brainliest for sure

There are two electrons in the first energy level and seven electrons in the second energy level.

There are two electrons in the first energy level and five electrons in the second energy level.


There are five electrons in the first energy level and two electrons in the second energy level.


There are seven electrons in the first energy level and two electrons in the second energy level.

Answers

Flourine is an element which has 9 electrons. The first energy level can only hold upto 2 electrons so therefore two electrons of the fluorine element will be in the first orbital.

In the second orbital there will be seven electrons. The configuration will be as 1s2, 2s2 , 2p5 .

The first orbital has capacity of two electrons and then the remaining two electrons will be in higher second energy level.

The further 5 electrons will be in lower second energy level which is denoted by p.

Learn more at https://brainly.com/question/24373325

Answer:

#1. 5

#2.They have valence electrons in the same energy level.

#3. Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.

#4. cesium (Cs)

#5.  There are two electrons in the first energy level and seven electrons in the second energy level.

Explanation:

which physical property of the gas molecules gives the measurement of temperature​

Answers

The temperature of a gas molecule is measured by the average translational kinetic energy

Answer:

The temperature of a gas is a measure of the average translational kinetic energy of the molecules. In a hot gas, the molecules move faster than in a cold gas; the mass remains the same, but the kinetic energy, and hence the temperature, is greater because of the increased velocity of the molecules

Explanation:

This is also from Go0gle because my explanation would've been an essay long .

but in shorter version if the gas molecules move fast it's hot an if it moves slow its cold hope this helps .

Who would most likely be required to work with sodium hydroxide?

Answers

Answer:

a plumber

Explanation:

Which one of the following explains how light energy helps us see all kinds of objects around us?

a flashlight shining light on a book

Light is absorbed by the objects and does not reach our eyes.
The objects emit light that enters our eyes.
Light reflects off the objects and enters our eyes.
Light travels in a straight line until it enters our eyes.

Answers

Answer:

light reflects off the objects and enter our eyes

Q- Wheel of a running vehicle has which energy?
(a) Vibrational Kinetic energy
(b) Translational Kinetic energy
(c) Rotational Kinetic energy
(d) All of the above​

Answers

Answer:

Rotational kinetic energy

Explanation:

It is caused by circular motion.

pls someone help me pls…. and pls explain to me how

Answers

Answer:

1.12 × 10⁴ m/s

Explanation:

The escape velocity of the object v = √(2GM/R) where G = gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of the Earth = 6 × 10²⁴ kg and R = radius of the Earth = 6.4 × 10⁶ m

Since v = √(2GM/R)

Substituting the values of the variables into the equation, we have

v = √(2GM/R)

v = √(2 × 6.67 × 10⁻¹¹ Nm²/kg² × 6 × 10²⁴ kg/6.4 × 10⁶ m)

v = √(13.34 × 10⁻¹¹ Nm²/kg² × 6 × 10²⁴ kg/6.4 × 10⁶ m)

v = √(80.04 × 10⁻¹¹ × 10²⁴Nm²/kg/6.4 × 10⁶ m)

v = √(80.04 × 10¹³Nm²/kg ÷ 6.4 × 10⁶ m)

v = √(80.04 ÷ 6.4 × 10¹³ ÷ 10⁶Nm/kg)

v = √(12.50625 × 10⁷ Nm/kg)

v = √(125.0625 × 10⁶ Nm/kg)

v = 11.18 × 10³ m/s

v = 1.118 × 10 × 10³ m/s

v = 1.118 × 10⁴ m/s

v ≅ 1.12 × 10⁴ m/s

Plz Help me thank uuu...
Which of these is a likely impact of the stronger than normal trade winds on the eastern Pacific ocean?

Warm surface water builds up, causing lower than average temperature.
Warm surface water builds up, causing higher than average temperature.
Warm surface water is reduced, causing colder conditions than normal.
Warm surface water is reduced, causing hotter conditions than normal.

Answers

Answer:

Jet stream would be displaced southwards causing heavy rain and flooding.

Explanation:

The other options of the question were A) Jet stream would be displaced northwards causing drought. B) Jet stream would be displaced southwards causing drought. D) Jet stream would be displaced northwards causing heavy rain and flooding,

The statement that is a likely impact of stronger than normal trade winds in the Pacific Northwest to the United States is "Jet stream would be displaced southwards causing heavy rain and flooding."

We are talking about climate or weather terminology. In this case, we are referring to the "El Niño" (the Children) effect. Its presence affects the weather in North America. This phenomenon combines with the "La Niña) effect and it presents itself every two to seven years, ad they last from 8 to 12 months, affecting the weather conditions of the region.

Answer:

jet stream should be displaced southwards which causes heavy rainfall and flood.

Other Questions
If the U.S. economy is producing at a level that is substantially less than potential GDP and the government's budget deficits are increasing aggregate demand, then ____________________________ is not much of a danger. Whats bigger, fungi or virus? The biological classification of organisms is called taxonomy. Based on your own investigation, discuss the importance of taxonomy in biological research. I just need the numbers anyone help ? three problems to develop the school Please answer this and show the work/explain for me2/7m - 1/7 = 3/14 Evaluate: 2-4 . =100 . -8 . -16 D. 1 16 Which of the globes in Figure 7.9 will light up? A firm is making an economic loss of $100,000. This means that: multiple choice 1 the firm should immediately exit the industry. the firm's revenues are less than its opportunity costs. the firm is not making an accounting profit. the firm could increase economic profit if its resources were used in a different way. If a firm is making an economic profit of zero: multiple choice 2 it will have unhappy stockholders. it is not making an accounting profit. the firm should change to a different line of business. it cannot make a higher economic profit by changing how it is using its resources. How can you protect yourself from infectious diseases?A. making sure your immunizations are currentB. all of the aboveC. choosing healthful behaviorsD. avoiding contact with pathogens Geometry, please answer question ASAP We have two fractions, 3/4 and 7/6 , and we want to rewrite them so that they have a common denominator (and whole number numerators). What numbers could we use for the denominator? I...the film was gripping, Harry slept from beginning to end Define a service in economics Which organelle is responsible for transporting lipids in the cell?A. nucleus B. rough ER C. golgi apparatus D. mitochondrion Snapping fingers or flashing lights to get the attention of a deaf person would be similar to what in hearing cultureO grandly bowingO politely waitingO rudely interruptingO suddenly sneezing There is no difference between a drama and a novel, each of tell a storyTruthFalse Thomas, the Department Head of the meat processing unit of a food manufacturing company, refuses to allow an OSHA (Occupational Safety and Health Administration) compliance inspector to carry out the inspection process. In this scenario, what action can the OSHA inspector take A 100.0 m long polymer cable of uniform circular cross section and of diameter 0.4cm has a mass of 1885.0 gm. What is the mass density, of the polymer in kg/m3? Solve T=L(2+RS) for R