Answer:
b. the action is not allowed.
Explanation:
Traffic signs are established rules and regulations designed to direct and guide commuters and other road users.
A red circle and diagonal slash on a sign simply means that the action is not allowed.
A hortatory technique is focused on encouraging, exhorting and urging people to do that which is right, acceptable and worthy of emulation by others.
For example, commuters and road users are being urged not to litter the highway with thrash, waste, or dirt, in order to protect the planet from environmental degradation and pollution. This would help in conserving and mitigating risks posing as a threat to our dear planet and habitat.
Hence, a hortatory technique in policy implementation and enactment is primarily aimed at appealing to the sense and conscience of individuals, to engage in socially responsible acts.
Recall when you built your information sending device. Why did we decide to send a message as a sequence of two options rather than modifying our devices to represent more options
Learn more:
brainly.com/question/13187838
After a chart has been inserted and formatted, is it possible to change the data range it refers to or to add new rows of data?
No, additional data cannot be included in a chart once it has been created; the user should delete the chart and create a new chart.
Yes, click the Select Data button in the Data group under the Design tab to extend or reduce the data range.
Yes, click the chart, select the additional rows or columns of data to add, and press Enter on the keyboard.
Yes, double-click the chart and select Properties from the list; in the Properties box, insert the new data range to include in the chart.
Answer: Yes, click the Select Data button in the Data group under the Design tab to extend or reduce the data range.
Explanation:
Excel allows one to be able to update the data in a graph because the designers knew that information needs to be updated sometimes.
This is why there is an option to use the Data button in the Data group which is under the Design tab to increase or decrease the data range that is to be used in the chart which means that a new row of data could even be added.
Research and describe plug-ins and their usage in graphic design.
Answer:
Plug-ins are software developed to work with another software that is already installed in the computer. They are basically add-on software that enhance a functionality of an existing software. These plug-ins can be used for different purposes based on which software they support. There can be plug-ins for search engines, audio-video players, photo-editing software, graphical design software, and more.
Plug-ins may be developed by the same company which developed the software that the plug-in is supposed to work with. It may also be developed by independent developers who just want to solve or add an element to the existing features of a software.
Plug-ins are mostly free and are released after the target software is tested and released.
Plug-ins offer a lot of assistance in graphical design. It works with the design software for adding or enhancing affects and styles to the original work. Some of the functions that popular plug-in software provide are:
• to improve color, sharpness, and focus (perspective) of the images
• to create (and enhance) natural lighting effects within the image
• to sharpen or define (emphasize) particular parts of the image
• create motion blur
• change point-of-focus of the image
• alter the level of opacity of brushes
• alter the size of brush strokes (different from the ones that already exist)
• Control and enhance the intensity of dark areas in an image
• eliminate distortion due to camera shake
• create metallic edges for elements in the image
• introduce mood and blended contrast effects
Explanation:
This is what it said when I submitted my answer
write one function each of caps lock and shift keys.
Answer:you can use the shift key to use symbols instead of numbers on the top numbers part of the keyboard
Explanation:
Some Examples are ( ) $ &
What method is used to prevent the random number generator from always starting with the same number?
seed()
random()
randint()
initialize()
Answer:
seed()
Explanation:
Since computer random isn't actually random, and is a predetermined sequence of numbers, seed() allows us to create different sequences of numbers, and thus more randomized numbers.
Hope this helps!
Answer:
the answer is seed()
Explanation:
i took the assignment
What is the primary difference, if any, between a web master and a web producer? While a web master maintains a company’s websites, the web producer maintains a company’s entire web-based system. While a web producer maintains a company’s websites, the web master maintains a company’s entire web-based system. While a web master maintains a company’s web presence, the web producer maintains all technology at a company. While a web producer maintains a company’s web presence, the web master maintains all technology at a company.
Answer:
While a web master maintains a company’s websites, the web producer maintains a company’s entire web-based system.
I'm assuming that's A
write a program to check the password( qbasic)
Answer:
Assuming this is in python:
def check_password(password):
correct_password = "qbasic"
if password == correct_password:
return True
else:
return False
def main():
user_input = input("Type in your password: ")
if check_password(user_input):
print("Correct!")
else:
print("Wrong, try again")
main()
Explanation:
Hope this helped :) If it wasn't suppose to be in python, tell me so I can make it in the correct programming language.
Have a good day :)
Predict the output... LET A= -20.50 LET B = ABS(A) PRINT B END
Answer:
full and then I would like this
Mary uploaded some images on her website. She chose an image and downloaded it. She found that the image she saw on screen did not seem to have the same DPI as when she had scanned it (she had uploaded a scanned image with 300 DPI). What could be reason with this visual decrease in DPI on the computer screen? (Correct Answer only)
A. Some image resolution was lost while uploading it
B. She downloaded a compressed version of the image.
C. The computer reset the resolution of the image.
D. Her file was probably corrupted while downloading.
E. Computer screens typically display images of only 72 DPI.
The reason for this visual decrease in DPI on the computer screen is some image resolution was lost while uploading it. The correct option is A.
What is resolution?Resolution is the quality of the image that we see in the screen. It is the number of pixels per inch of space. The meaning of PPI is pixel per inch. When a high-resolution picture is seen, it means there are more pixels per inch.
When a picture is downloaded from a site. It does not download in the original pixels because during downloading some pixels are lost due to slow net or the settings of the computer. And a compressed version does not download on its own, and corrupted files do not affect the resolution.
Thus, the correct option is A. Some image resolution was lost while uploading it.
To learn more about resolution, refer to the link:
https://brainly.com/question/15189307
#SPJ5
explain about third generation of computer
Answer:
The period of third generation was from 1965-1971. The computers of third generation used Integrated Circuits (ICs) in place of transistors. ... This development made computers smaller in size, reliable, and efficient. In this generation remote processing, time-sharing, multiprogramming operating system were used.
Explanation:
hope it helps
You have been asked to help a small office with a limited budget set up and configure a Windows network. There are only five computers in this office. In addition to the ability to share network resources, security is a top priority.
Which of the following is the BEST course of action in this situation?
A. Install a HomeGroup to provide a single login and simplify security and sharing.
B. Install a WorkGroup to provide a single login and simplify security and sharing.
C. Install a WorkGroup to allow each device to control what is shared and with whom.
D. Install a HomeGroup to allow each computer to control which items are shared and who can access them.
Answer:
I will choose a option tin best
Answer: Install a WorkGroup to allow each device to control what is shared and with whom.
Explanation:
full form of ip ........?
Sophie often makes grammatical errors in her document. Which feature of the Spelling and Grammar tool can she use to understand the errors? A. Next Sentence B. Options C. Change D. Explain
Answer:
D. Explain
Explanation:
Sophie would need an explanation of why she makes grammatical errors to understand the errors.
describe in detail what each step would look like if you ran into a software error.
Answer:
First you have to identify the problem.
Second Gather information.
Third iterate through potential solutions.
Fourth Test your solution.
Explanation:
There are many different ways to handle errors in software but this is the way I do it.
Hope this helps :)
After running into a software error, a user needs to first determine the reason for the error, work towards a solution and then execute the solution discovered.
Software ErrorA software error occurs when an error or unusual behaviour is observed in a piece of software and which can be reproduced after certain actions are performed that are in line with the stated rules of the software developer. In other words, a software error does not occur if the software was not used as directed by the software developer.
You can learn more about software errors here https://brainly.com/question/18497347
#SPJ6
What are the factors affecting the life of ballast? Explain.
Answer:
When it's too hot or too cold.
Explanation:
When a bulb of the wrong size or voltage is used in the fixture, the ballast often overheats, causing the light to shut off. The bulbs and the fixture must also match in frequency, or the ballast becomes overworked and overheated.
there are 9 CTSOs, name 3
High speed printer that produce higher quality printouts but are more expensive is
A. Printer
B. Pages per minute
C. Inkjet printer
D. Laser printer
Answer:
i think its D, laser printer
Explanation:
The costs incurred when a firm buys on the marketplace what it cannot make itself are referred to as
Answer: transaction cost
Explanation:
Transaction costs refers to the expenses that are incurred when a good or service is bought or sold. Transaction cost is the labor that's required in bringing a product to the market.
Transaction cost is the costs that are incurred when a firm buys on the marketplace what it cannot make itself.
Transaction costs are the costs that are incurred which don’t accrue to the participant of the transaction.
Which of these is NOT a user interface?
A. Graphical user
B. Command line
C. Icon interface
D. Menu driven
Answer:
menu driven is not an interface
Explanation:
hope that helps you
please follow
please mark brainliest
I will follow you if you mark me brainliest
Which of these is NOT a user interface?
Choose: B. Command line
Equi Technologies offers cloud computing services to several data centers around the world. It hosts services in the cloud, which can be accessed by clients through Equibrowse-a Web browser designed by Equi Technologies. In the context of cloud computing services, it is evident that Equi Technologies provides _____.
Answer:
The answer is "Software as a service".
Explanation:
The software license strategy permits access to the software via a remote server through subscription-based access to the software. Rather than installing software on each user's PC, SaaS lets them access applications via the Internet.
For a number of reasons, it could save you money. Purchase/installation costs and also ongoing maintenance and upkeep are avoided, which is the primary benefit. SaaS apps may be easily downloaded and managed without breaking the bank on hardware parts and upgrades.
A device is a program that must be installed in order for the peripheral device to be able to
work with the computer or laptop.
O prompter
O connector
O driver
O assister
In most cases; for a peripheral to work properly, a software must be installed on the computer, the peripheral is to be connected to.
The software is called (c) device driver
Some peripherals (such as mouse, keyboards, external Bluetooth, joysticks etc.) require that the user of the computer installs device driver on the host system.
Without the device driver installed, the following are the possible effects
The peripheral will not work at allThe peripheral will not function properlyThe peripheral causes the computer not to function optimallyHence, (c) driver is correct
Read more about device drivers at:
https://brainly.com/question/14308161
Which of the following stores the operating system?
O Von Neumann center
O Bluetooth center
O the cloud
O random access memory
Answer:
The Cloud
Explanation:
Clouds are basically computers offsite. The cloud is used for many things, Like storage, to running applications which needs an operating system to work. Just like the device you are using right now to use Brainly. It needs an operating system to install a web broswer or app to acess a service. Hope this helps!
4. Calculate the standard deviation for the following data set: Foundations of Technology Engineering byDesi OITEEA . . Data Set = 4, 14, 6, 2, 7, 12 217 ,
Answer:
[tex]\sigma_x = 5.68[/tex]
Explanation:
Given
[tex]x = 4, 14, 6, 2, 7, 12 2,17[/tex]
Required
The standard deviation
First, calculate the mean
[tex]\bar x =\frac{\sum x}{n}[/tex]
So, we have:
[tex]\bar x = \frac{4+ 14+ 6+ 2+ 7+ 12 +2+17}{8}[/tex]
[tex]\bar x = \frac{64}{8}[/tex]
[tex]\bar x = 8[/tex]
The standard deviation is:
[tex]\sigma_x = \sqrt{\frac{\sum(x - \bar x)^2}{n-1}}[/tex]
So, we have:
[tex]\sigma_x = \sqrt{\frac{(4 - 8)^2+ (14 - 8)^2+ (6 - 8)^2+ (2 - 8)^2+ (7 - 8)^2+ (12 - 8)^2+ (2 - 8)^2+ (17 - 8)^2}{8-1}}[/tex]
[tex]\sigma_x = \sqrt{\frac{226}{7}}[/tex]
[tex]\sigma_x = \sqrt{32.2857}[/tex]
[tex]\sigma_x = 5.68[/tex]
What is the process of planning, designing, and implementing change requests?
_____ is the process of planning, designing, and implementing change requests.
Answer:
Change Management
Explanation:
The described process is formally known as Change Management
A logistics company's vulnerability scan identifies the following vulnerabilities on Internet-facing devices in
the DMZ: SQL injection on an infrequently used web server that provides files to vendors SSL/TLS not used for a website that contains promotional information
The scan also shows the following vulnerabilities on internal resources: Microsoft Office Remote Code Execution on test server for a human resources system
TLS downgrade vulnerability on a server in a development network In order of risk, which of the following should be patched FIRST?
A. Microsoft Office Remote Code Execution
B. SQL injection
C. SSL/TLS not used
D. TLS downgrade
Answer:
A. Microsoft Office Remote Code Execution
Explanation:
From the given options, we have;
The web server having a SQL injection is infrequently use
The information on the website having SSL/TLS not used is promotional
The location of the server having a TLS downgrade is on a development network
The location of the Microsoft Office Remote Code Execution is on a human resource system test server
Therefore, given that the test server, is the deployment source of the main server, and that with a Remote Code Execution, RCE, cyber attack, the attacker is able to make commands work on other computers, the RCE attack on the test server is a potential access of an attack on the main servers, and should be patched first.
Marcus White has just been promoted to a manager. To give him access to the files that he needs, you make his user account a member of the Managers group, which has access to a special shared folder. Later that afternoon, Marcus tells you that he is still unable to access the files reserved for the Managers group. What should you do
Answer:
log off of his account and log back in
Explanation:
The first thing that Marcus should do would be to log off of his account and log back in. This is so that the new changes to his permissions can take effect. This should solve his problem and grant him access to all the permissions available in the Managers Group. If this does not work, then it is most likely that he is still in the previous group which has the Manager level permissions blocked. In this case he would need to leave the previous group that he is in because the blocking permissions overrides the access allowed from the Managers group.
Your disaster recovery plan calls for backup media to be stored at a different location. The location is a safe deposit box at the local bank. Because of this, the disaster recovery plan specifies that you choose a method that uses the least amount of backup media, but also allows you to quickly back up and restore files. Which backup strategy would BEST meet the disaster recovery plan
Answer:
Perform a full backup once per week and a differential backup the other days of the week.
Write technical term of following statements: a.The set of programs to perform specific task. b.A feature of computer which tells multi-functioning capability of computer. c.The first calculating machine designed for the manipulation of census data. d.The first computer programmer.
Answer:
a) Application software
d) Lady Augusta Ada Lovelace
b) (it may be versatility
convert (0.255)¹⁰ into binary
0.01000001010001111011
Must click thanks and mark brainliest
solve plz
Jenae helps maintain her school web site and needs to create a web site poll for students. Which tool will she use?
JavaScript
HTML
CSS
Text editor
Answer:
HTML
Explanation:
HTML is used is making web pages.
Answer:
what
Explanation:
