An aluminium cube of side 5cm and R.D 2.7 is suspended by a thread in alcohol of relative density 0.8o. Find the tension in thread.​

Answer:

a. Time = 3.6 seconds

b. Time = 4.4 seconds

Explanation:

Given the following data;

Distance = 180 m

Speed = 50 m/s

a. To find the time;

Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.

Mathematically, speed is given by the formula;

[tex]Speed = \frac{distance}{time}[/tex]

Making time the subject of formula, we have;

[tex]Time = \frac{distance}{speed}[/tex]

Substituting into the equation, we have;

[tex]Time = \frac{180}{50}[/tex]

Time = 3.6 seconds

b. Distance = 220 meters

Speed = 50 m/s

To find the time;

[tex]Time = \frac{distance}{speed}[/tex]

Substituting into the equation, we have;

[tex]Time = \frac{220}{50}[/tex]

Time = 4.4 seconds

Answer:

dₒ/dᵢ = 0.32

Explanation:

From the question given above, the following data were obtained:

Object height (Hₒ) = 4 mm

Image height (Hᵢ) = 1.25 cm

Ratio of object distance (dₒ) to image distance (dᵢ) [dₒ/dᵢ] =?

Next, we shall convert 4 mm to cm. This can be obtained as follow:

10 mm = 1 cm

Therefore,

4 mm = 4 mm × 1 cm / 10 mm

4 mm = 0.4 cm

Next, we shall determine the magnification of the lens. This can be obtained as follow:

Object height (Hₒ) = 4 mm

Image height (Hᵢ) = 1.25 cm

Magnification (M ) =?

M = Hᵢ/Hₒ

M = 1.25 / 0.4

M = 3.125

Finally, we shall determine the ratio of object distance (dₒ) to image distance (dᵢ). This can be obtained as follow:

Magnification (M) = 3.125

Ratio of object distance (dₒ) to image distance (dᵢ) [dₒ/dᵢ] =?

Magnification (M) = image distance (dᵢ) / object distance (dₒ)

M = dᵢ/dₒ

Invert

1/M = dₒ/dᵢ

1/3.125 = dₒ/dᵢ

dₒ/dᵢ = 0.32

Therefore, the ratio of object distance (dₒ) to image distance (dᵢ) [dₒ/dᵢ] is 0.32

Answer:

-mg = -7.52*9.8 = - 73.696N

Answer:

See image

Explanation:

Plato

Answer:

In many vibrating systems the frictional force Ff can be modeled as being proportional to the velocity v of the object: Ff = −cv, where c is called the viscous damping coefficient.

Answer:

Time, t = 28.87 seconds

Explanation:

Given the following data;

Acceleration = 1.20 m/s²

Distance = 500 meters

Initial velocity = 0 m/s

To find the time to cover the distance, we would use the second equation of motion;

[tex] S = ut + \frac {1}{2}at^{2}[/tex]

Where;

S represents the displacement or height measured in meters.

u represents the initial velocity measured in meters per seconds.

t represents the time measured in seconds.

a represents acceleration measured in meters per seconds square.

Substituting into the equation, we have;

[tex] 500 = 0*t + \frac {1}{2}*(1.2)*t^{2}[/tex]

[tex] 500 = 0 + 0.6*t^{2} [/tex]

[tex] 500 = 0.6t^{2} [/tex]

[tex] t^{2} = \frac {500}{0.6} [/tex]

[tex] t^{2} = 833.33 [/tex]

Taking the square root of both sides, we have;

[tex] t = \sqrt{833.33} [/tex]

Time, t = 28.87 seconds

Answer:

F = 6.12 10⁻¹⁵ N,    a = 3.66 10¹² m / s²

Explanation:

The magnetic force is

            F = q v x B

bold letters indicate vectors, the modulus of this expression is

            F = q v B sin θ

as they indicate that the magnetic field is vertical the proton moves horizontally the angle is 90º

suppose that the energy of the proton is totally kinetic

        E = 5.3 MeV (10⁶ 1.6 10⁻¹⁹J / 1 eV) = 8.48 10⁻¹³ J

       E = K = ½ m v²

       v = [tex]\sqrt{2E/m}[/tex][tex]\sqrt{2 \ 8.48 \ 10^{-13} / 1.67 \ 10^{-27}}[/tex]

       v = [tex]\sqrt{2 \ 8.48 \ 10^{-13} / 1.67 \ 10^{-27}}[/tex]

       v = [tex]\sqrt{10.155 \ 10^{14}}[/tex]

       v = 3.19 10⁷ m / s

we calculate

        F = 1.6 10⁻¹⁹  3.19 10⁷  1.2 10⁻³

        F = 6.12 10⁻¹⁵ N

The direction of this out is given by the right hand rule,

thumb in the direction of speed, south to north

fingers extended in the direction of the magnetic field, vertical

the probe points in the direction of the force for a positive charge,  East

To calculate the acceleration we use Newton's second law

        F = ma

        a = F / m

        a = 6.12 10⁻¹⁵ / 1.67 10⁻²⁷

        a = 3.66 10¹² m / s²

the direction of the acceleration is the same as the direction of the force

Explanation:

Lets say you have a ball in your hand, you raise your hand to just above your head. Now, when you did that you created potential energy that is ready to be released. you drop the ball and the ball bounces a few times off the ground. Now lets say you got a ladder and doubled the ball's height doubling the energy now stored in the ball, when you drop it the ball should bounce much higher after hitting the ground as a result of more energy being released.

Hope this helped.

Answer:

So, option(a).

Explanation:

Momentum is the measure of motion of the object.

Momentum is given by the product of mass and the velocity of the object.

(a) It is false.

(b) It is true, momentum is transferred.

(c) It is true, As the momentum of the system is conserved when no external force is applied on the system.

(d) It is true, as the momentum is associated with the velocity of the object.

Answer:

The spring constant is 171.43 N/m.

Explanation:

compression in spring, x = 0.07 m

force, F = 12 N

Let the spring constant is K.

Use the formula of the restoring force of the spring

F = K x

12 = K (0.07)

K = 171.43 N/m  

Answer:

Dynamo

Explanation:

As we all know, there are dynamos in bicycles. When we paddle the cycle, the wheels of the cycle rotates by generating kinetic energy. When the wheels rotate, the dynamo starts to rotate. This makes the motor inside the dynamo rotates and generate electrical energy.

x for a smaller magnet at the position marked zin

Answer:

11. Food Chain

12. Food web

13. Habitat

Explanation:

The difference between food chain and food web is;

In a food chain, it shows one path of energy in one ecosystem.

In a food web, it shows various food chains in many ecosystems and how they are connected.

Answer:

Resistance is a measure of the opposition to current flow in an electrical circuit.All materials resist current flow to some degree. They fall into one of two broad categories: Conductors: Materials that offer very little resistance where electrons can move easily.

Answer:

Matter and atoms

Answer:

It will take 1 hr and 15 mins.

Explanation:

Let's look at the speed equation:

s=d/t

We want to find the time, and we have the speed and the distance, so we rearrange the equation. t will be on one side and s and d will be on the other side.

t=d/s

t=60km/(48km/h)

t=1.25h

Answer:

V²=U² + 2as

Where V=Final Velocity

U=Initial Velocity

a=acceleration ( Deceleration in this case)

s=distance covered

10² = 30² + 2(a)(20)

100 = 900 + 40a

100 - 900 = 40a

-800=40a

a= -800/40

a= -20ms-².

Its negative because the car Decelerated.

Answer:

density = mass/volume

density=0.8

volume=36

mass=?

0.8=mass/36

mass = 36x0.8=28.8g

Answer:5m/s² well I am not pretty sure but hope it's help

Explanation:

u=0m

final velocity ,v=50m/s

t=10s

(v-u)/t=(50-0)/10=50/10=5m/s²

Answer:

Explanation:

A galvanometer which is used for the measurement of a very small current can be converted to a voltmeter when it is connected to a high resistance or a multiplier is a series. The purpose of this is to reduce the amount of current that goes through the galvanometer so as prevent full scale deflection.

Answer:

(a) [tex]\frac{P_{250k}}{P_{2000k}}=2.4\ x\ 10^{-4}[/tex]

(b) P =  0.816 Watt

Explanation:

(a)

The power radiated from a black body is given by Stefan Boltzman Law:

[tex]P = \sigma AT^4[/tex]

where,

P = Energy Radiated per Second = ?

σ = stefan boltzman constant = 5.67 x 10⁻⁸ W/m².K⁴

T = Absolute Temperature

So the ratio of power at 250 K to the power at 2000 K is given as:

[tex]\frac{P_{250k}}{P_{2000k}}=\frac{\sigma A(250)^4}{\sigma A(2000)^4}\\\\\frac{P_{250k}}{P_{2000k}}=2.4\ x\ 10^{-4}[/tex]

(b)

Now, for 90% radiator blackbody at 2000 K:

[tex]P = (0.9)(5.67\ x\ 10^{-8}\ W/m^2.K^4)(1\ x\ 10^{-6}\ m^2)(2000\ K)^4[/tex]

P =  0.816 Watt

Answer:O que faz o longa se destacar é seu cenário mergulhado na cultura chinesa e a delicadeza com que o luto e sua superação são tratados.

Explanation:

Por que se você pensar ela estava sempre buscando superar a morte da mãe.

Answer:

Try different angles

Answer:

I don't know 11 but in no. 10,

The ans is 3.66

Total distance = 10m+30m+15m = 55m

Total time = 5secs+7secs +3secs =15secs

Av speed = d/t =55/15 = 3.66 m/s

Answer:

D.STATIC FRICTION

Explanation:

Have a nice day

Answer:

, a fundamental property of all matter. It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force. The greater the mass of a body, the smaller the change produced by an applied force.

Answer:

256.68m

Explanation:

that is the procedure above

A cheetah runs at a speed of 27.6 m/s. If the cheetah runs for 9.30 s, then the distance covered by the cheetah would be 256.68 metes

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is meter/second. The generally considered unit for speed is a meter per second.

The mathematical expression for speed is given by

speed = distance /Total time

As given in the problem A cheetah runs at a speed of 27.6 m/s. If the cheetah runs for 9.30 s, we have to calculate the distance covered by the cheetah

Distance=?

speed=27.6 m/s

time= 9.30 s

speed = distance /Total time

27.6 m/s = Distance /9.30 s

Distance = 27.6×9.30

               =256.68 metes

Thus, the distance covered by the cheetah would be 256.68 metes

Learn more about speed from here

brainly.com/question/7359669

#SPJ5

Answer:

Explanation:

Use the one-dimensional equation for motion

v = v₀ + at and filling in,

v = 0 + (-9.8)(3.32) so

v = -33 m/s (negative because it is going downwards and upwards is positive).

Answer:

power per square meter = 4.593 × 10^(6) W/m²

Wavelength of peak intensity = 9.67 × 10^(-7) m

Explanation:

From Stefan-Boltzmann law, total emitted power per square meter is given as;

P/A = eσT⁴

where;

P is power

A is surface area

σ = Stefan-Boltzmann constant = 5.67 × 10^(-8) W/m².k⁴

T = temperature of the body = 3000 K

e = emissivity of the substance (for ideal radiation, it has a value = 1)

Thus, Plugging in the relevant values we have;

P/A = 1 × 5.67 × 10^(-8) × (3000)^(4)

P/A = 4.593 × 10^(6) W/m²

Let's find the wavelength of peak intensity.

From wiens displacement law, we know that;

λ_m × T = b

where;

λ_m = maximum wavelength

T = Temperature

b is Wien's displacement constant = 2.9 × 10^(−3) m/K

thus;

λ_m = b/T = (2.9 × 10^(−3))/3000 = 9.67 × 10^(-7) m

1. Fermentation is a metabolic process that produces chemical changes in organic substrates through the action of enzymes. In biochemistry, it is narrowly defined as the extraction of energy from carbohydrates in the absence of oxygen. The science of fermentation is known as zymology.

2. In general, the longer that fermentation goes on, the more sugar is converted into alcohol, resulting in a less sweet (or “drier”) and more alcoholic beverage. To produce beer, various grains are used instead of grapes as the source of sugars. ... This drying process converts the starches present in grain into sugars

Answer:

1.) Fermentation, chemical process by which molecules such as glucose are broken down anaerobically. More broadly, fermentation is the foaming that occurs during the manufacture of wine and beer, a process at least 10,000 years old.

2.) In general, the longer that fermentation goes on, the more sugar is converted into alcohol, resulting in a less sweet (or “drier”) and more alcoholic beverage. To produce beer, various grains are used instead of grapes as the source of sugars. ... This drying process converts the starches present in the grain into sugars.

Explanation:

Answer:

The accerlation is a derived from the other quantities like change in velocity/time take etc.