Answer pls…………………………

Answer:

I don't agree

Explanation:

Atoms have 3 subatomic particles protons, electrons and neutrons,

Answer:

a. Energy = 28800000 Joules

b. Energy = 8 Kwh

c. Cost = $4

Explanation:

Given the following data;

Power = 1000 Watts

Time = 8 hours

Cost = $0.5 per KWh

Conversion:

1 hour = 60 * 60 = 3600 seconds

8 hour = 8 * 3600 = 28800 seconds

a. To find much electrical energy, in joules;

Energy = power * time

Energy = 1000 * 28800

Energy = 28800000 Joules

b. To find how much energy is that in kilowatt hours;

Energy = power * time

Energy = 1000 * 8

Energy = 8000 Watt-hour = 8000/1000 = 8 Kwh (1 Kilowatts is equal to 1000 watts).

c. To calculate the cost of using this heater;

Cost = 8 * 0.5

Cost = $4

Explanation:

area=length(m) ×breadth(m) . The unit of area is expressed in terms of fundamental units m^2.thus it is derived unit

Answer:

ANO BA TO?(;-;)

Explanation:

miss the rage??

Answer:

50 N.

Explanation:

From the question given above, the following data were obtained:

Mass (m) = 5 Kg

Coefficient of friction (μ) = 0.36

Normal reaction (N) =?

Next, we shall determine the weight of the body. This can be obtained as follow:

Mass (m) = 5 Kg

Acceleration due to gravity (g) = 10 m/s²

Weight (W) =?

W = mg

W = 5 × 10

W = 50 N

Finally, we shall determine the normal reaction. This can be obtained as follow:

Weight (W) = 50 N

Normal reaction (N) =?

Normal reaction = weight of the body

N = W = 50 N

Thus, the normal reaction acting on the body is 50 N

Answer:

Thermal capacity of the object = 720 j/°C

Explanation:

Given:

Specific heat capacity of metal = 360J/(kg°C)

Mass of given object = 2 kg

Find:

Thermal capacity of the object

Computation:

Thermal capacity = Specific heat x Mass

Thermal capacity of the object = Specific heat capacity of metal x Mass of given object

Thermal capacity of the object = 360 x 2

Thermal capacity of the object = 720 j/°C

Answer:

The correct answer is "64 J".

Explanation:

The given values are:

Mass,

m = 52 kg

Velocity,

v = 6 m/s

Mechanical energy,

= 1000 J

Now,

The gravitational potential energy will be:

⇒ [tex]P.E=1000-\frac{1}{2}mv^2[/tex]

           [tex]=1000-\frac{1}{2}\times 52\times (6)^2[/tex]

           [tex]=1000-26\times 36[/tex]

           [tex]=1000-936[/tex]

           [tex]=64 \ J[/tex]

Answer:

there it is fella tried on ma own observation

Answer:

Arrange an annual service. Treat your boiler like your car. ...

Keep your boiler clean. ...

Bleed your radiators. ...

Top up the pressure. ...

Use a Powerflush. ...

Insulate your pipes. ...

Turn the heating on. ...

If all else fails…

Explanation:

Answer:

One end of any bar magnet will always want to point north if it is freely suspended. This is called the north-seeking pole of the magnet, or simply the north pole. The opposite end is called the south pole.

Explanation:

Answer:

North Pole and South Poles

Explanation:

There is no east or west in a magnetic field of a magnet. The magnetic field lines comes from North pole to south pole.

Answer:

Fan speed

Explanation:

because is the dependent variable

Answer: The given statement is True

Explanation:

A uniform motion is defined as the motion where an object is moving at a constant speed.

A non-uniform motion is defined as the motion where an object keeps changing its position and does not move at a constant speed.

We are given:

A car takes a full round of journey in a roundabout with constant speed

As the speed remains constant in a circular path, it is considered a uniform motion.

Hence, the given statement is True

Answer:

Explanation

The most famous and common example is Christmas tree lights. You can't tell easily by looking at them whether they are in series or parallel. But you sure know the difference when one of them burns out. When that happens, the whole string goes dead. No matter what you do (other than find out which bulb burned out) will not fix the problem.

Another example is anything that is temperature controlled. For example a furnace is controlled by a thermostat. When the room temperature reaches a certain point, the thermostat is constructed in a certain way so that it forms an open circuit and no current can flow through it. The furnace motor turns off and the furnace stops pumping hot air into a room.

Answer:

The statements that best compares radiation and conduction are the following: both transfer thermal energy from warm objects to cooler objects and both can transfer energy through matter. The difference is that conduction is through direct heat transfer; whereas, radiation transfers heat through waves.

Answer:

The energy will be increased by a factor 16

Explanation:

Mathematically, we have it that the energy carried by the sound wave is directly proportional to the square of the amplitude

So we have it that;

E = k * A^2

where E is the wave energy

K is the constant value

A is the amplitude value

So;

If E1 = k * (A1)^2

E2 = k * (A2)^2

But A2 = 4A1

E2 = k * (4A1)^2

E2 = k * 16(A1)^2

Divide E2 by E1

E2/E1 = k/k * 16(A1)^2/(A1)^2

E2/E1 = 16

E2 = 16 * E1

so simply, the energy will be increased by a factor of 16

Explanation:

[tex]C.) \: Conduction \: \\ \\ = > it \: is \: a \: process \: of \: transferring \: \\ \\ of \: heat \: from \: one \: object \: to \: another \\ \\ when \: they \: are \: in \: contact \: [/tex]

By the conduction process the heat reaches the pin.Option C is correct.

The term "heat transfer" refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.

Conduction is the type of heat transfer occurs mainly in solid or by contact.In the given condition the rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1​.

By the conduction process the heat reaches the pin.

Hence option C is correct.

To learn more about the heat transfer refer to the link;

https://brainly.com/question/13433948

#SPJ2

Ohm's law states that :

the terms used are :

let's solve for electric current :

[tex]\mathfrak{good\: \: luck \: \: for \: \: your \: \: assignment}[/tex]

Answer:

152,155 J

Explanation:

115,333 + 36,822 = 152,155J

no net force axting on it

Answer:

I think none of above

Explanation:

hioe it's right answer

When the brake is applied to the car and comes to rest after some time is an example of an object that is slowing down.

The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.

1. When the brake is applied to the body and comes to rest after some time is an example of an object that is slowing down.

2. When a person accelerates the car and the velocity is increasing is an example of speeding up.

3. An object moves in a circular motion moving at a constant speed but changing direction,

4. Acceleration is the rate of change of velocity. If the change in the velocity is constant the acceleration is zero is an example of moving at a constant velocity with zero acceleration.

To learn more about acceleration, refer to the link;

https://brainly.com/question/2437624

#SPJ1

Answer:

1= Kidneys

2= Ureters

3=Bladders

4=Urethra

Explanation:

Functions of kidney: Regulations of water balances, excretions of nitrogenous wastes(urea)

Functions of Liver: Detoxifications, protein synthesis

Functions of Skin: Temperature regulations, Metabolic functions, Excretion

Functions of lungs: Respiration, Water balance regulations

Tip: If you want faster and correct answers you should label your questions under the correct subject.

Answer:

wats the following items

hope this helps

Answer:

If a person is pushing a desk across the room, then there is an applied force acting upon the object. The applied force is the force exerted on the desk by the person.

Complete Question:

The Statue of Liberty is made of copper that has turned green because it has undergone a change. What can be said about this change?

Group of answer choices.

A. The change is a physical change because the copper in the statue is still there.

B. The change is a physical change because a new chemical is formed on the outside of the statue.

C. The change is not a physical change because the color of the statue has changed.

D. The change is not a physical change because a new chemical is formed on the outside of the statue.

Answer:

D. The change is not a physical change because a new chemical is formed on the outside of the statue.

Explanation:

A physical change can be defined as a type of change that only affects the physical form of a chemical substance (matter) without having any effect on its chemical properties. Thus, a physical change would only affect the physical appearance and properties of a chemical substance (matter) but not its chemical properties.

This ultimately implies that, a physical change result in a change of matter from one form or phase (liquid, solid or gas) to another without a corresponding change in chemical composition.

Additionally, a physical change is a type of change that involves an increase or decrease in the volume of a physical object (object). Also, this change can be reversed to the original state under certain conditions.

Since the Statue of Liberty which is made of copper turned green, the change is not a physical change because a new chemical is formed on the outside of the statue.

Answer:

The ratio of forces is 22 : 3.

Explanation:

Case I:

initial velocity, u = 35 mph

final velocity, v = 0

time, t = 15 ms

Case II:

initial velocity, u = 35 mph

final velocity, v = 0

time, t' = 110 ms

let the mass is m.

According to the Newton's second law, the force is given by the rate of change of momentum.

So

[tex]F =\frac{m(v-u)}{t}\\\\F'= \frac{m(v-u)}{t'}\\\\So, \frac{F}{F'} =\frac{t'}{t}\\\\\frac{F}{F'}=\frac{110}{15}=22:3[/tex]

Answer:

t_total = 6.99 s

Explanation:

It asks us how long it takes to hear the sound, for this we must look for the time (t₁) it takes for the sound to reach the microphone, the time it takes for the video signal (t₂) to reach the television and the time (₃) it takes for the TV sound to reach us, so the total delay time is

         t_total = t₁ + t₂ + t₂

we look for t1, it indicates that the distance x = 22m

          v = x / t

           t = x / v

           t₁ = 22/343

           t₁ = 6.41 10-2 s

time t₂

          t₂ = 4500 103/3 108

          t₂ = 1.5 10-5 s

time t₃

          t₃ = 2/343

          t₃ = 5.83 10⁻³

Total time is

         t_total = t₁ + t₂ + t₃

         t_total = 6.41 10⁻² + ​​1.5 10⁻⁵ + 0.583 10⁻²

         t_total = 6.99 s

Answer:

B. Uranium 238.

Explanation:

It is radioactive and can be used to treat cancer in the form of radiotherapy

Answer:

The answer answer is 150 km

Answer:

Explanation:

Distance =Speed×time

Speed=50km/hr

Time=3hours

Hence the Distance will be(50km/hr×3hours)

The answer is 150km

Answer:

33.33j+6.67i km/hr

Explanation:

From the law of conservation of momentum,

Applying,

mu+m'u' = V(m+m')............... Equation 1

Where m = mass of the truck, m' = mass of the car, u = initial velocity of the truck, u' = initial velocity of the car, V = Final velocity.

Note: let j represent the north, and i  represent the east

From the question,

Given: m = 1500 kg, u = 60j, m' = 1200 kg, u' = 15i

Substitute these values into equation 1

1500*60j+1200*15i = V(1500+1200)

90000j+18000i = 2700V

V = (90000j+18000i)/2700

V = 33.33j+6.67i km/hr