ASA, SSS, SAS

Define each postulate and give a well written and visual example of each term.

Include as much detail as possible

Answer: 100:3

Step-by-step explanation:

Answer:

the ratio of first-year college basketball players to high school seniors playing basketball is 3:100.

Step-by-step explanation:

The problem states that for every 75,000 high school seniors playing basketball, about 2,250 play college basketball as first-year students. To write the ratio of first-year college basketball players to high school seniors playing basketball, we need to compare the two quantities.

The ratio is a way of expressing the relationship between two numbers as a fraction or a pair of numbers separated by a colon (:). In this case, we want to express the ratio of the number of first-year college basketball players to the number of high school seniors playing basketball.

To write the ratio, we start by putting the number of first-year college basketball players (2,250) in the numerator of a fraction. We put the number of high school seniors playing basketball (75,000) in the denominator of the same fraction.

So the ratio can be expressed as:

2,250/75,000

To simplify this fraction, we can divide both the numerator and denominator by a common factor. In this case, both 2,250 and 75,000 are divisible by 750. Dividing both numbers by 750 gives:

2,250/75,000 = 3/100

First of all, perfect squares do not end in 2.

The exponent has to be an even number when 2 is the base. For example 2^8 = 64. 8 is an even number. So 64 is a square number.

Answer:

a. Jason's equation in y = mx + b form is y = 15x + 1.

b. Scott's equation in y = mx + b form is y = 15x.

Since both are moving at the same speed, they will meet at the point where their distances from the starting point are the same. Let d be the distance from Scott's starting point to the store. Then, the distance from Jason's starting point to the store is d + 1. Using the formula distance = rate × time, we can set up an equation:

15t = d

15t - 1 = d + 1

Solving for t in both equations, we get t = d/15 and t = (d+2)/15, respectively. Equating these expressions for t, we get d/15 = (d+2)/15, which simplifies to d = -2. This means that they will not meet before reaching the store, as Jason is already 1 mile ahead of Scott and will stay ahead throughout the trip.

If we were to graph both lines on the same coordinate plane, we would have two parallel lines with a slope of 15, where Jason's line would intersect the y-axis at 1.

Answer:

[tex]{ \sf{ = 41 \times 100 + 41 \times { \boxed{2}}}} \\ \\ = { \sf{ \boxed{4100} + { \boxed{82}}}} \\ \\ = { \sf{ \boxed{4182}}}[/tex]

Answer:

A- 2

B- 4,100

C- 82

D- 4,182

Answer:

k

Step-by-step explanation:

2x+13<5x−20

Subtract 5x from both sides.

Combine 2x and −5x to get −3x.

Subtract 13 from both sides.

Subtract 13 from −20 to get −33.

Divide both sides by −3. Since −3 is negative, the inequality direction is changed.

​

x>11

Pattern B shοws a quadratic relatiοnship between the step number and the number οf dοts.

Wοrd prοblems are οften described verbally as instances where a prοblem exists and οne οr mοre questiοns are pοsed, the sοlutiοns tο which can be fοund by applying mathematical οperatiοns tο the numerical infοrmatiοn prοvided in the prοblem statement. Determining whether twο prοvided statements are equal with respect tο a cοllectiοn οf rewritings is knοwn as a wοrd prοblem in cοmputatiοnal mathematics.

Here pattern B shοws a quadratic relatiοnship between the step number and the number οf dοts.

We can write quadradic equation as [tex]y=1+x^2[/tex]

Where y is number οf dοts and x is step number.

Then if x=0 and y=1

If x = 1 and y = 2

If x = 2 and y = 5

If x = 3 and y = 10

Hence Patten B fοllοws the quadratic realatiοnship.

Tο learn more about word problem refer the below link

https://brainly.com/question/21405634

#SPJ1

The surface area of the rectangular prism is 170 square yards.

Surface area is the total area of a three-dimensional shape's surface. Add the areas of all six faces to find the surface area of a cuboid with six rectangular faces. Alternatively, label the cuboid's length (l), width (w), and height (h) and use the formula: surface area (SA)=2lw+2lh+2hw.

To calculate the surface area of the rectangular prism, add the areas of each of its faces.

The front and back faces are 5 yards by 6 yards in size, so each has an area of:

5 yards x 6 yards equals 30 square yards

The top and bottom faces are 5 yards by 5 yards, so each has an area of:

5 yards x 5 yards equals 25 square yards

The two side faces have dimensions of 6 yards by 5 yards, for a total area of:

30 square yards = 6 yards x 5 yards

As a result, the surface area of the rectangular prism is as follows:

Front face area plus back face area plus top face area plus bottom face area plus left side face area plus right side face area

= 30+30+25+25+30+30

= 170 square yards

As a result, the rectangular prism has a surface area of 170 square yards.

To know more about surface area visit:

hhttps://brainly.com/question/29298005

#SPJ1

a. Two levels of factor B were used in the experiment.

b. The degrees of freedom associated with interaction are 50.

c. The error mean square is 6.00. d. The mean square for factor A is 175.00.e. The experiment was conducted with three replicates.f. The interaction is significant. Factor A is significant. Factor B is not significant.g. An estimate of the standard deviation of the response variable is 2.449. h. If the experiment had been run in blocks (CRBD) there would have been 12 degrees of freedom for blocks.Solution:Factorial design: A factorial design is an experimental design that consists of two or more factors, each with two or more levels, and each subject is assigned to one and only one level of each factor. The objective of a factorial experiment is to analyze the effect of each factor on the response variable and to examine if there is any interaction between factors.a. Two levels of factor B were used in the experiment.b. Interaction degrees of freedom = AB = 50.c.

Mean square for error: MSE = 150/10 = 15.d. Mean square for factor A: MS(A) =[tex]SSA/dfA = 350/2 = 175.e.\\[/tex] Three replicates were conducted (from the error df = 10).f. Interaction is significant. Factor A is significant. Factor B is not significant.g. Estimate of the standard deviation of the response variable: sqrt(15/2) = 2.449.h. If the experiment had been conducted in a CRBD, there would have been 12 degrees of freedom for the block.

for such more questions on standard deviation

https://brainly.com/question/475676

#SPJ11

The probability that it the marble taken out of the box is not blue is [tex]\frac{112}{131}[/tex].

Probability is a branch of math that studies the chance or likelihood of an event occurring.
There are [tex]75[/tex] red marbles, [tx]37[/tex] white marbles, and [tex]19[/tex] blue marbles.

If a marble is randomly selected from the box, we have to find the probability that it is not blue.

Then the total number of marbles = [tex]75 + 37 + 19 = 131.[/tex]

The probability that a marble is not blue:-

[tex]P[/tex](Not blue) = [tex]P[/tex](Red or White)

[tex]P[/tex](Red or White) = [tex]\frac{(75 + 37)}{131}[/tex]

[tex]P[/tex](Red or White) = [tex]\frac{112}{ 131}[/tex]

[tex]P[/tex](Not blue) = [tex]1 - P[/tex](Blue)

[tex]P[/tex](Not blue) = [tex]1 - \frac{19}{131}[/tex]

[tex]P[/tex](Not blue) = [tex]\frac{112}{ 131}[/tex]

Therefore, the probability that a marble selected from the box is not blue is [tex]\frac{112}{131}[/tex].

Learn more about Probability here:

https://brainly.com/question/30034780

#SPJ11

Answer: $3.64

Step-by-step explanation:

At the store, you buy four toys for $1.5, which means you pay $1.5 * 4, or $6.

Then, you calculate the sales tax, which is 6%, which means you multiply $6 by (100% + 6%), or $6*(1.06) which is $6.36.

Finally, if you hand the cashier $10, and you spent $6.36, your change is $10 - $6.36, which is $3.64.

Answer:

Step-by-step explanation:

The given line is y = 5x + 2. We know that any line perpendicular to this line will have a slope that is negative reciprocal of 5. The negative reciprocal of 5 is -1/5.

Line A is perpendicular to y = 5x + 2, so it has a slope of -1/5. We also know that the y-intercept of line A is 3. Therefore, the equation of line A can be written as:

y = (-1/5)x + 3

or in the form y = mx + c, where m = -1/5 and c = 3.

The statement that is correct is (D) We can use the binomial distribution with n = 100, k = 10, and p = 0.24 to calculate this probability.

The binomial distribution can be used to calculate the probability of a certain number of successes in a given number of trials, where each trial has a fixed probability of success.

The probability of a flight being delayed is 0.24, and the probability of a flight not being delayed is 0.76. Therefore, the probability of exactly 10 flights out of 100 being delayed can be calculated using the binomial distribution with n = 100, k = 10, and p = 0.24.

Learn more about binomial distribution here: https://brainly.com/question/30049535

#SPJ11

In the given system of equations one taco costs $0.80 and one burrito costs $0.72.

An equation system is a finite collection of equations for which we searched for the common solutions. It is sometimes referred to as a set of simultaneous equations or an equation set. The classification of a system of equations is similar to that of a single equation. In modelling issues where the unknown values may be expressed in the form of variables, a system of equations finds use in everyday life.

Let us suppose the cost of one taco = x.

Let us suppose the cost of one burrito = y.

Then, for Emma we have:

3x + y = 3.65

For Cooper we have:

x + 2y = 3.30

Using elimination, multiply the first equation by 2 and subtract it from the second equation:

(2)(3x + y = 3.65)

6x + 2y = 7.30

x + 2y = 3.30

-5x = -4

x = 4/5

Substituting this value of x into either equation:

3(4/5) + y = 3.65

y = 2.15/3 ≈ 0.72

Therefore, one taco costs $0.80 and one burrito costs $0.72.

Learn more about system of equations here:

https://brainly.com/question/13760328

#SPJ1

Answer:

The equation of a line perpendicular to y=3 that goes through the point (-5, 3) is: x = -5.

Step-by-step explanation:

To find the equation of a line perpendicular to y=3 that goes through the point (-5, 3), we need to remember that the slope of a line perpendicular to another line is the negative reciprocal of the slope of the original line.

The equation y=3 is a horizontal line that goes through the point (0,3), and its slope is zero. The negative reciprocal of zero is undefined, which means that the line perpendicular to y=3 is a vertical line.

To find the equation of this vertical line that goes through the point (-5, 3), we can start with the point-slope form of a linear equation:

y - y1 = m(x - x1)

where m is the slope of the line and (x1, y1) is a point on the line. Since the line we want is vertical, its slope is undefined, so we can't use the point-slope form directly. However, we can still write the equation of the line using the point (x1, y1) that it passes through. In this case, (x1, y1) = (-5, 3).

The equation of the vertical line passing through the point (-5, 3) is:

x = -5

This equation tells us that the line is vertical (since it doesn't have any y term) and that it goes through the point (-5, 3) (since it has x=-5).

So, the equation of a line perpendicular to y=3 that goes through the point (-5, 3) is x = -5.

Answer:

x= -5

Step-by-step explanation:

The perpendicular line is anything with x= __.

x= -5 however, will go through the point (-5, 3) and that is our answer.

To create opposite x terms, we need to multiply the first equation by -5.

How to choose what term to multiply the first equation?

To choose what term to multiply the first equation, we need to consider the coefficients of the variable that we want to eliminate (in this case, the x variable) in both equations. Our goal is to create opposite terms for that variable in the two equations, so that when we add or subtract the equations, that variable will be eliminated.

Determining the number to multiply the first equation by to form opposite terms for the x-variable :

In this case, the coefficient of x in the first equation is 2/5, and the coefficient of x in the second equation is -2.

To create opposite terms for x, we need to find a constant that, when multiplied by the first equation, will result in a coefficient of x that is the negative of the coefficient of x in the second equation (i.e., -2).

To do this, we can divide the coefficient of x in the second equation by the coefficient of x in the first equation, and then multiply the entire first equation by the resulting constant.

In this case, we have:

[tex](-2)/(2/5) = -5[/tex]

Multiplying the first equation by -5 gives:

[tex]-5(2/5)x + (-5)6y = -5(-10)[/tex]

which simplifies to:

[tex]-2x - 30y = 50[/tex]

Now we have two equations with opposite x terms:

[tex]-2x - 4y = 40[/tex]

[tex]-2x - 30y = 50[/tex]

To know more about equations visit :

brainly.com/question/17149704

#SPJ1

This principle is validated by the data shown in the table.

Tests and measurements is an essential aspect of the education process as it enables educators to gauge the level of knowledge and skills their students have acquired. The principle that longer tests tend to be more reliable than shorter ones has some merit because it allows educators to assess a broader range of skills and knowledge, which increases the validity of their assessments.In my opinion, the principle that longer tests tend to be more reliable than shorter ones is illustrated in the reliability coefficients shown in the table. This is because the data shows that the reliability coefficients for longer tests are consistently higher than those for shorter tests. Additionally, the results for the 10-item test indicate a higher reliability coefficient compared to the 5-item test, which supports the notion that longer tests are more reliable than shorter ones.The table displays that the longer tests have higher reliability coefficients compared to the shorter tests. For example, in the 5-item test, the reliability coefficient is .45, while the 10-item test's reliability coefficient is .73. This shows that the 10-item test is more reliable than the 5-item test, as the higher reliability coefficient indicates that the assessment is consistent in measuring the skill or knowledge it is intended to measure. As a result, this principle is validated by the data shown in the table.

Learn more about principle

brainly.com/question/30388578

#SPJ11

The required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Chebyshev’s Theorem:Chebyshev's Theorem states that, for any given data set, the proportion (or percentage) of data points that lie within k standard deviations of the mean must be at least (1 - 1/k2), where k is a positive constant greater than 1.Calculation:Given,Mean (μ) = 72N (Total number of values) = 387Interval (x) = 64-80 and 56-88Minimum values (n) = 344Minimum percentage (p) = (344 / 387) x 100 = 88.85%From the given data we have,1. Calculate the variance of the distribution,Variance = σ2 = [(n × s2 ) / (n-1)]σ2 = [(344 × 42) / 386]σ2 = 18.732. Calculate the standard deviation of the distribution,σ = √(18.73)σ = 4.33. Calculate k = (|x - μ|) / σ for the given interval 56-88,Here, x1 = 56, x2 = 88, k1 = |56-72| / 4.33 = 3.7, k2 = |88-72| / 4.33 = 3.7Thus, k = 3.74. Calculate the minimum percentage of values within the interval 56-88 using Chebyshev's Theorem,p = [1 - (1/k2)] x 100p = [1 - (1/3.7)2] x 100p = 74.37% (approximately)Therefore, the required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Learn more about Percentage

brainly.com/question/2155156

#SPJ11

Answer:

h = 15 cm

Step-by-step explanation:

Area of triangle equals the area of rectangle. As the dimensions of the rectangle is given, we can first find the area of the rectangle.

      [tex]\boxed{\bf Area \ of \ the \ rectangle = length * width}[/tex]

                                               = 10 * 9

                                               = 90 cm²

Area of triangle = area of rectangle

                          = 90 cm²

base of the triangle = b = 12 cm

 [tex]\boxed{\bf Area \ of \ triangle = \dfrac{1}{2}bh}[/tex]  where h is the altitude and b is the base.

         [tex]\bf \dfrac{1}{2} b* h = 90 \\\\\dfrac{1}{2}*12* h = 90[/tex]

                      [tex]\bf h = \dfrac{90*2}{12}\\\\\boxed{\bf h = 15 \ cm}[/tex]

The smallest value of `n` for which `S_n` has an element of order greater than or equal to 100 is 101.

To determine the smallest value of n for which S_n has an element of order greater than or equal to 100, we can use the formula

S_n = n!/r!(n - r)!,

where n is the number of elements in the set, and r is the number of elements being chosen at a time.

Given, S_n has an element of order greater than or equal to 100. The smallest value of n should be determined.

The formula for the number of permutations in a set with n elements is given by, `S_n = n!/r!(n - r)!`

where `n` is the number of elements in the set and `r` is the number of elements being chosen at a time.

The element of order `n` in `S_n` is an `n` cycle. For `n = 100`, we have an element of order 100.

This element can be expressed as `(1 2 3 ... 99 100)`. Thus, `r = 100`.

Substituting these values in the formula of S_n we get, S_n = n!/r!(n - r)! => n!/(100!(n - 100)!)

Now, we have to find the smallest value of n for which S_n has an element of order greater than or equal to 100. If we substitute `n = 100`, then we will have an element of order 100. But the question asks for the smallest value of n. So, if we substitute `n = 101`, we will have an element of order `101`. Hence, the smallest value of `n` for which `S_n` has an element of order greater than or equal to 100 is 101.

To know more about the smallest value: https://brainly.com/question/31133248

#SPJ11

Answer:

4m + 6

Step-by-step explanation:

Since the length is twice as long your equation should look like this

2(2m + 3) = L

which would be 4m + 6 as the length of the rectangle

The rounding of the number to 1 significant figure is-

216 × 876 = 180000

216 × 876

This number can be written in form of rounding to 1 significant figure as;

200 × 900 = 180000

To know more about the significant figure, here

https://brainly.com/question/293578

Answer: Associative property

Step-by-step explanation:

The definition of the associative property is the answer is the same no matter how the terms are grouped. Hope this helped!

If f(x,y) > 0 and is a continuous function defined over a rectangle R=[a,b]x[c,d], then the double integral over R of f(x,y) can be interpreted as the volume of a solid that lies in the first octant and under the graph of the function f(x,y) over the region R.

The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0, where f is a continuous function defined on a rectangle R = [a,b] × [c,d] is given as follows:

The double integral of f(x,y) over R, if f(x,y) > 0, gives the volume under the graph of the function f(x,y) over the region R in the first octant.

Consider a point P (x, y, z) on the graph of f(x, y) that is over the region R, and let us say that z = f(x,y). If f(x,y) > 0, then P is in the first octant (i.e. all its coordinates are positive).

As a result, the volume of the solid that lies under the graph of f(x,y) over the region R in the first octant can be found by integrating the function f(x,y) over the rectangle R in the xy-plane, which yields the double integral.

The following formula represents the double integral over R of f(x,y) if f(x,y) > 0:

∬Rf(x,y)dydx

The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0 is given by the volume of the solid that lies under the graph of the function f(x,y) over the region R in the first octant.

To know more about the "continuous function": https://brainly.com/question/30089593

#SPJ11

According to the circle theorem, we can find the length of the cord, x = 4 units.

Geometrical assertions known as "circle theorems" set forward significant conclusions pertaining to circles. These theorems provide significant information regarding several aspects of a circle.

A circle's chord is a line segment that hits the circle twice on its edge, separating it into two equal pieces. The circle is divided into two equal pieces by the longest chord of the circle, which runs through its centre.

Here in the given circle,

As per the intersecting chords theorem,

AB × CB= BE × BD

⇒ 6 × 6 = 9× x

⇒ x = 36/9=4

Therefore, the length of the chord, x = 4 units.

To know more about circle theorem, visit:

https://brainly.com/question/19906313

#SPJ1

Smallest number in the data set that is not an outlier is 15, Median of the first half is 17, Median of the entire data set is 20.5. Median of the second half is 22. Largest number in the data set that is not an outlier is 35.

Give a short note on Median?

In statistics, the median is a measure of central tendency that represents the middle value in a dataset. To find the median, the data must first be sorted in ascending or descending order. If the dataset contains an odd number of values, the median is the middle value. If the dataset contains an even number of values, the median is the average of the two middle values.

The median is a useful measure of central tendency in datasets that are skewed or have outliers, as it is less sensitive to extreme values than the mean. It is also useful in datasets with non-numeric values, such as rankings or survey responses.

To create a modified box plot, we need the following values:

The smallest number in the data set that is not an outlier: 15

The median of the first half of the data set: 17

The median of the entire data set: 20.5

The median of the second half of the data set: 22

The largest number in the data set that is not an outlier: 35

So the values needed to create a modified box plot for this data set are: 15, 17, 20.5, 22, 35.

The shape that results from connecting the points (-4, 1), (-4, -4), (0, 3), and (0, 6) is a trapezoid.

A trapezoid is a geometric form that has four sides, two of which are parallel and two of which are nonparallel (or skew lines). A trapezoid is also known as a trapezium (UK) or a trapeze (US).

The trapezoid's parallel sides are known as the bases, and the two nonparallel sides are known as the legs or lateral sides. The trapezoid is also sometimes referred to as the irregular quadrilateral.

A quadrilateral is a shape that has four sides, four vertices, and four angles. The following are the characteristics of a trapezoid:

The formula for the area of a trapezoid is as follows:

Area of a trapezoid = [ (base 1 + base 2) / 2 ] x height

To know more about the "trapezoid": https://brainly.com/question/1463152

#SPJ11

Answer:

[tex]\frac{11}{8}[/tex]

Step-by-step explanation:

3(2k+3)=6-(3k-5)

6k +9=6-3k+5

6k+3k=6+5

8k=11

k=[tex]\frac{11}{8}[/tex]

Answer: I think it is k=2/9

Step-by-step explanation:

Answer:

3 pounds of coffee.

Step-by-step explanation:

Equation

y = -7.37x + 80  

substitute 57.89 for y

57.89 = -7.37 + 80   Subtract 80 from both sides

57.89 - 80 = -7.37 + 80 - 80

-22.11 = -7.37x  Divide both sides by -7.37

3 = x

3 pound of coffee

Helping in the name of Jesus.

Answer:

rita received a $80 gift card for a coffee store. she used it in buying some coffee that cost $7.37 per pound. after buying the coffee, she had $57.89 left on her card. How many pounds of coffee did she buy?​

Step-by-step explanation:

Let's first find out how much money Rita spent on coffee:

$80 (initial balance) - $57.89 (remaining balance) = $22.11 spent on coffee

Now, let x be the number of pounds of coffee that Rita bought. Since the coffee costs $7.37 per pound, we can set up the equation:

$7.37x = $22.11

Solving for x, we can divide both sides by $7.37:

x = 3

Therefore, Rita bought 3 pounds of coffee.

The missing value to find the length of BC is 9x.

The distance formula is a formula for calculating the separation in coordinates between two places. It is provided by and deduced from the Pythagorean theorem by:

distance = √((x₂ - x₁)² + (y₂ - y₁)²)

The distance formula is used to compute distances between objects or places in many disciplines, including geometry, physics, and engineering.

The distance formula is given as:

distance = √((x₂ - x₁)² + (y₂ - y₁)²)

Substituting the values of the coordinates of B and C we have:

distance = √((7x - (-2x))² + (-1y - (-4y))²)

distance = √((9x)² + (3y)²)

distance = √(81x² + 9y²)

distance = 3√(9x² + y²)

Hence, the missing value to find the length of BC is 9x.

Learn more about distance formula here:

https://brainly.com/question/28956738

#SPJ1