Answer:
C. T>617 K
Explanation:
We are given that
[tex]\Delta H=176KJ/mol[/tex]
[tex]\Delta S=0.285KJ/K\cdot mol[/tex]
We have to find the temperature at which the reaction is spontaneous.
When
[tex]\Delta H>0, \Delta S>0[/tex]
Therefore, the reaction is spontaneous at certain range of temperature.
Option A is not true.
[tex]\Delta G=\Delta H-T\Delta S[/tex]
When [tex]\Delta G[/tex] is negative, then the reaction is spontaneous.
[tex]\Delta G=176-0.285T[/tex]
When T<50
Suppose T=49 K
[tex]\Delta G=176-49\times 0.285>0[/tex]
Therefore, [tex]\Delta G is positive[/tex].Hence, the reaction is not spontaneous.
Option B is wrong.
C.T>617K
Suppose T=618 K
[tex]\Delta G=176-0.285\times 618=-0.13<0[/tex]
Therefore, [tex]\Delta G is negative[/tex].Hence, the reaction is spontaneous.
So, option C is true.
D.T<617 K
Suppose T=616 K
[tex]\Delta G=176-0.285\times 616=0.44>0[/tex]
Therefore, [tex]\Delta G is positive[/tex].Hence, the reaction is not spontaneous.
So, option D is not true.
what is 10x412x3021x13123
True or false: Denaturation of an enzyme increases the rate at which it may catalyze a chemical reaction.
Balance the equation for
__Ca+__Pb(NO3)2—__Pb+__Ca(NO3)2
Answer:
Ca + Pb(NO3)2 → Pb + Ca(NO3)2
Explanation:
This is an oxidation-reduction (redox) reaction:
PbII + 2 e- → Pb0
(reduction)
Ca0 - 2 e- → CaII
(oxidation)
Pb(NO3)2 is an oxidizing agent, Ca is a reducing agent.
a) The bubbles must be negatively charged.
b) The bubbles must be positively charged.
c) The bubbles must have the opposite charge to the charge on the student.
d) The bubbles must have the same charge as the charge on the student.
Answer:
C
Explanation:
like charges repel each others so if they have the same charge they will move away from each other
(6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)= ?kj
Answer:
-2,802.960 kJ
Explanation:
The dimensional equation of the given quantities is presented as follows;
(6 mol) × (-393.5 kJ/mol) + (6 mol) × (-285.83 kJ/mol) - (1 mol) × (-1,273.02 kJ/mol) = ? kJ
The equation, can be written as follows;
[tex]\left (6 \times (-393.5) \, mol \times \dfrac{kJ}{mol} \right ) + \left(6 \times (-285.83) \, mol \times \dfrac{kJ}{mol} \right) - \left (1 \times (-1,273.02) \, mol \times \dfrac{kJ}{mol} \right) = ?[/tex]We note that [tex]mol \times \dfrac{kJ}{mol} \right) = kJ[/tex], therefore, the above equation becomes;
[tex]\left (6 \times (-393.5) \ kJ\right ) + \left(6 \times (-285.83) \ kJ \right) - \left (1 \, \times (-1,273.02) \ kJ \right) = -2,802.960 kJ[/tex]
Answer:
C. ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)
Explanation:
Got it right on edge.
: the one after is -2803.
Ecstasy is one example of which of the following?
Depressants
Narcotics
O Club drugs
Stimulants
Answer:
Narcotics
I think ans is
Explanation:
tropicaia
Ecstasy, also known as MDMA, is used recreationally, so it can be called a club drug. However, it is illegal in the US, so it would be considered a narcotic as well. The effects it has are also of the stimulant variety, so they would fall under that category as well. It is definitely not a depressant.
How many bonds can a carbon atom form?
O A. 1
B. 2
C. 4
O D. 3
The formal charge and P-O bond order in PO43- respectively are 0.6, -0.75 -0.75, 1.25 1.0, -0.75 1.25, -3 98.
Answer:
-0.75 , 1.25
Explanation:
Number of electrons present in valence shell,
P-O = 5 + 8 = 13
Number of electrons involved in bond formation,
13 - 3 = 10
Number of bonds in PO3 - 4ion = 102
Average P-O bond = 1.25
Average formal charge on Oxygen atom is -0.75
Polywool fibre is
a.natural
b.synthetic
c.monomer
d.blended
Polywool fibre is synthetic.
⇒b. Synthetic
Hope It Helps You ✌️
Answer:
[tex]\large{\underbrace{\underline{\fcolorbox{White}{pink}{\bf{b.synthetic }}}}}
[/tex]
help me plz!!!!
a. Calculate the solution concentration for each of the HCl samples. The first one has been done for you.
b. As the concentration of the HCl solution increased, did the speed of the reaction increase or decrease?
c. Therefore, as the concentration of a reactant increases, does the rate of the reaction increase or decrease?
d. Do your predictions previous to this investigation agree with your results?
e. Make a general rule about the effects of concentration of reactants on reaction rates.
Answer:
From this solution, you can do the a number question answer.
When a gas is heated,
Answer: when gas is heated ,they gain more kinetic energy causing them to move faster.
Explanation: so as they gain kinetic energy they hit the walls of the container with more force thus causing pressure to increase
HOPE THIS HELPSS comment if u need more explanation
Using the diluted solution from the 100-mL volumetric flask, rinse a 1-mL vol. pipet with a few drops and then pipet exactly 1.00-mL into a 50-mL volumetric flask. (Take care not to pipet any solids.) Fill the 50-mL volumetric flask to the mark with acidic FeCl3 solution. Cap and invert to mix the solution. What color is the solution
Answer:
The color of the solution turned a clear brown sort of a copper color
Explanation:
The color of the solution turned a clear brown sort of a copper color.
This is because ASA and the FeCl3 are reacting in a manner that it is resulting in the creation of a metal.
Coupled reactions are: A. reactions in which endergonic reactions obtain the energy to go forward from exergonic reactions. B. reactions in which exergonic reactions obtain the energy to go forward from endergonic reactions. C. reactions that lower the activation energy of another reaction. D. any reactions that are accelerated by an enzyme.
Answer:
A
Explanation:
Coupled reactions are reactions in which endergonic reactions obtain the energy to go forward from exergonic reactions.
When benzene diazonium chloride interacts with phenol, the para position of the phenol molecules is associated with the diazonium salt, resulting in
p-hydroxyazobenzene. The coupling reaction is the name given to this process.
MATCH THE FOLLOWING:
1.rayon. a. Thermocol
2.teflon. b. Mattresses
3.acrylic. c. Dress material
4.polycot. d. Nonstick cookware
5.polyurethane. e. syntheticknittingwool
6.polystyrene. f.Blended dress material
I don't know
I don't know
I don't know
I don't know
If the sky is actually black, and the water is actually clear, where does the blue color for the sky and water come from?
Answer:
that the water is blue because of the way water absorbs light, the way particles in the water scatter light, and also because some of the blue light from the sky is reflected
10:38 Fri 9 Jul
ES
GCSE Science - Chemistry
2 of 15
Name the indicator that is red in acid and turns green when the solution becomes neutral.
|
Answer.
Universal indicator
Explanation.
Universal indicator has many different colour changes, from red for strongly acidic solutions to dark purple for strongly alkaline solutions. In the middle, neutral pH 7 is indicated by green.
Why does it stop expanding when you stop blowing air into it
Answer:
this is because of collisions of molecules present in that particular system.
Explanation:
For instance, when air is filled in a balloon then the number of the molecules of air inside the balloon increases. As a result more collisions of molecules take place with the walls. This gives rise to high air pressure on the walls which causes the balloon to expand and get inflated.
Two magnets are stuck together. What might you have to do to get them to separate?
Explanation:
The easiest method to separating magnets is to slide them apart. When separating magnets keep in mind shear force. Magnets are measured on pull strength, so are up to five times easier to move if they are pushed apart instead of pulled apart. Small magnets slide relatively easily, even without spacers.
Firmly slide them away from each other and far enough apart so that they don't hop back together. Neodymium magnets are quite strong.
What are properties of a magnet?The properties of the magnet are:
Magnets will attract ferromagnetic.Like poles of the magnet repel each other and unlike poles bait each otherThe poles of the magnet are in the team.Thus, slide them away from each other and far enough apart so that they don't hop back together.
To learn more about magnets click here:
https://brainly.com/question/13026686
If the elements W, X, Y, and Z have electronegativity values of 1.0, 2.0, 2.5, and 3.5, respectively, which bond is the least polar
Answer:
XY bond is the least polar
Explanation:
Given
[tex]W = 1.0[/tex]
[tex]X = 2.0[/tex]
[tex]Y = 2.5[/tex]
[tex]Z = 3.5[/tex]
Required
The least polar bond
First, we calculate the difference in the electronegativities
[tex]WX = X - W[/tex]
[tex]WX = 2.0 - 1.0[/tex]
[tex]WX = 1.0[/tex]
[tex]WY = Y - W[/tex]
[tex]WY =2.5 - 1.0[/tex]
[tex]WY =1.5[/tex]
[tex]WZ =Z-W[/tex]
[tex]WZ =3.5 - 1.0[/tex]
[tex]WZ =2.5[/tex]
[tex]XY = Y -X[/tex]
[tex]XY = 2.5 -2.0[/tex]
[tex]XY = 0.5[/tex]
[tex]XZ = Z -X[/tex]
[tex]XZ = 3.5 -2.0[/tex]
[tex]XZ = 1.5[/tex]
[tex]YZ = Z - Y[/tex]
[tex]YZ = 3.5 - 2.5[/tex]
[tex]YZ = 1.0[/tex]
The least of the above calculations will be the least polar.
Hence, XY is the least polar
C20H16+
_Cl2 →
C+
HCl
Please help me fast
Answer:
1 C10H16 + 8 Cl2 --> 10 C + 16 HCl
which organ is used to detect the product of neutralisation reaction
Answer:
Neutralization reactions occur when two reactants, an acid and a base, combine to form the products salt and water.
The organ that is used to detect the product of a neutralization reaction is the sense of taste.
When a neutralization reaction occurs between an acid and a base, it results in the formation of a salt and water. The salt produced in the reaction may have a distinct taste, depending on its chemical properties. For example, when hydrochloric acid reacts with sodium hydroxide, the products are sodium chloride and water. Sodium chloride, commonly known as table salt, has a characteristic salty taste.
Similarly, other salts formed from neutralization reactions may have different tastes. For instance, magnesium hydroxide reacting with acetic acid produces magnesium acetate, which has a slightly sweet taste. By using our taste buds, particularly on the tongue, we can detect and identify the taste of the salt formed during a neutralization reaction.
Learn more about Neutralization Reaction here:
https://brainly.com/question/23008798
#SPJ2
Which of the following belongs to VIIA?
a) Na
b) Mg
c) Cl
d) Xe
the right answer and please Quick
Answer: The answer is CL also known as chlorine
Help me please I really need this tomorrow
Answer:
answers:
1.b
2.d
3.b
4. c
5.c
6.d
7.c
Explanation:
I think this is the correct answer pls mark brainliest and like..
19. place moth balls in the closet and observe after several days.
20. whenever wax or a candle burns it turns from solid to liquid but again at room temperature it turns to solid
21. evaporation, condensation, precipitation
22. it produces new substances
23. vinegar Bubbles when baking soda is added.
24. steam
Select the structure that corresponds
to the name:
decanoic acid
COOH
A.
B. CH3(CH2)7COOH
C. both
Answer:
b
Explanation:
Molecular formula of Decanoic Acid is C₁₀H₂₀O₂ therefore Option A is the right answer.
What is Decanoic Acid ?Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .
In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .
In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.
Hence option A is the right answer.
To know more about Decanoic Acid;
https://brainly.com/question/8729762
#SPJ2
A vehicle is moving with a velocity of 20 m/s.how far does it moves in one hrs
In which of the following will the density increase?
Group of answer choices
An iron bar is heated.
A lead weight is moved from sea level to the top of a high mountain.
A sample of water is frozen.
A diamond is submerged in water.
A sample of chlorine gas is compressed.
Calculate the volume (in L) occupied by 3.40 g of NH3 at STP. (STP: 0 degree Celsius and 1 atmosphere of pressure).
Answer:
Calculate the volume (in L) occupied by 3.40 g of NH3 at STP. (STP: 0 degree Celsius and 1 atmosphere of pressure).
Explanation:
To get the volume of ammonia gas at STP, calculate the number of moles of [tex]NH_3[/tex] in the given amount.
Number of moles of [tex]NH_3[/tex] gas is:
[tex]number of moles of NH_3 gas&=\frac{given mass of the gas}{its molecular mass} \\ &=\frac{3.40g}{17.0g/mol} \\&=0.2 mol.[/tex]
Since,
1 mol of any gas at STP occupies ------- 22.4 L of volume.
then,
0.2 mol of [tex]NH_3[/tex] occupies how much volume?
[tex]=>0.2 mol x \frac{22.4 L}{ 1.0 mol} \\=4.48 L[/tex]
Hence, the volume occupied by 3.40 g of ammonia at STP is --- 4.48 L.
if drop a watermelon from the top of one of the tower dorms at CSU, and it takes 3.34 seconds to hit the ground, calculate how tall the building is in meters and then convert into feet.
Answer:
179.5 feet
Explanation:
54.718 m converted to 179.5 feet.
calculate the final pressure of a gas that is expanded from 725cm³ at 30C and 1.19 atm to 1.12cm³ at 43C
Answer:
Final pressure, P2 = 1088.89 atm
Explanation:
Given the following data;
Initial volume, V1 = 725 cm³
Initial temperature, T1 = 30°C
Initial pressure, P1 = 1.19 atm
Final volume, V2 = 1.12 cm³
Final temperature, T2 = 43°C
To find the final pressure (P2), we would use the combined gas law.
Mathematically, the combined gas law is given by the formula;
[tex] \frac {PV}{T} = k [/tex]
[tex] \frac {P_{1}V_{1}}{T_{1}} = \frac {P_{2}V_{2}}{T_{2}} [/tex]
Substituting into the formula, we have;
[tex] \frac {1.19*715}{30} = \frac {P_{2}*1.12}{43} [/tex]
[tex] \frac {850.85}{30} = \frac {P_{2}*1.12}{43} [/tex]
[tex] 28.3617 = \frac {P_{2}*1.12}{43} [/tex]
Cross-multiplying, we have;
[tex] 28.3617 * 43 = 1.12P_{2} [/tex]
[tex] 1219.5531 = 1.12P_{2} [/tex]
[tex] P_{2} = \frac {1219.5531}{1.12} [/tex]
Final pressure, P2 = 1088.89 atm
What phrase describes a good scientific question?
has a wide focus
addresses a gap in knowledge
does not lead to a testable hypothesis
O has a simple yes or no answer
vious Activity
