Tarnishing of iron is similar to which of the following changes?
O Folding a paper
O Shredding a paper
Burning a paper
Dropping a paper

Answers

Answer 1

Answer:

Burning paper

Explanation:

The tarnishing of iron is a chemical process, and the only option that is a chemical process is Burning paper


Related Questions

An object 2cm high is placed 3cm in front of a concave lens of focal length 2cm, find the magnification?​

Answers

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

a ball is thrown straight up into the air while the ball is traveleling upwards what are the magnitue and direction

Answers

Answer: hi your question is incomplete  attached below is the complete question

answer :

magnitude of acceleration :  | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j  ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

what force to be required to accelerate a car of mass 120 kg from 5 m/s to 25m/s in 2s​

Answers

Answer:

[tex]f = m \frac{v1 - v2}{t} \\ = 120 \times \frac{25 - 5}{2} \\ = 120 \times \frac{20}{2} \\ = 120 \times 10 \\ = 1200N \\ thank \: you[/tex]

If displacement has a magnitude AND direction is it a scalar or vector quantity?

scalar

vector

Answers

Explanation:

Obviously vector quantity

A neutral object must have _______________ A. An equal amount of positive and negative charges B. no charges present at all C. more positive than negative charges D. more negative than positive

Answers

Answer:

A

Explanation:

Consider a question you may not have considered before. Suppose you have a mole of sodium in a container that contains nothing that it will react with. A mole of anything is 6.02 * 10^23 (in this case atoms).

Suppose that every one of those atoms has contributed 1 electron to something.

Do you think it would be safe to touch the container knowing that there are 6.02 * 10^23 positive charges all eager to get another electron, because they don't like repelling each other.

Safe or not? I'll give you a hint. A lightning bolt does not contain anywhere near 6.02*10^23 charges. No where near.

So -- since you never get a shock from just touching anything, There must not be electrons or ions present.

The answer is A

The answer to your question is A

in a chemical equation, where do the products appear

Answers

Answer:

products would appear after the raw materials

Explanation:

raw material + raw material = product (anything deriving from combining two materials)

A Body is said to be in equilibrium when its:-
a) Acceleration is uniform
b) Speed is uniform
c) Speed and acceleration are uniform
d) Speed is uniform
I need the right answer. Please quick

Answers

Answer:

speed i uniform

Explanation:

if the speed is constant

Answer:

A

Explanation:

if it has a constant acceleration

You are accelerating upwards in an elevator when the net force on you increases. What happens to the acceleration

Answers

Answer:

the acceleration of the elevator is increasing

Explanation:

For this exercise we propose the solution using Newton's second law

         F -W = m a

         F = m (g + a)

If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.

A boy is moving a stone in a horizontal circle by mean of a thread attached to ut. The length if the threads us 1 m and the weight of the stone is 0.02 kg . The maximum tension of the thread can withstand us 1 ×10 ^-4 N. The boy is gradually increasing the speed if rotation. At what speed if the stone does the thread break ? ​

Answers

Answer:

Explanation:

This is a centripetal force problem where tension supplies the centripetal force needed to keep the stone moving in a circular manner. That formula for that is

[tex]F_c=T=\frac{mv^2}{r}[/tex] and filling in what we know:

[tex]1*10^{-4}=\frac{.02v^2}{1}[/tex] and solve that for v:

[tex]v=\sqrt{\frac{1*10^{-4}}{.02} }[/tex] which gives us a velocity of .07 m/s. Anything greater than this will break the string.

Why does An apple, potato, and onion all taste the same if you eat them with your nose plugged

Answers

It is very hard to distinguish between apple, pear and potato when they all look the same. Taking away the sense of smell then makes it even harder to distinguish between all three. The nose and mouth are connected through the same airway which means that you taste and smell foods at the same time.

- https://www.scienceworld.ca/resource/taste-smell-connection/

How much energy has 4×10^10m^3 of water collected in a reservoir at a hight of 100 m from the power house ?What kind of energy is that?

Answers

Answer:

PE = 3.92x10^16J

potential energy

Explanation:

PE = m*g*h

mass of water = 1000kg/m³

(4*10^10m³)*1000kg = 4*10^13kg

PE = (4*10^13kg)*(9.81m/s²)*(100m)

PE = 3.92x10^16J

Calculate surface tension of an enlarged radius of 4cm to 6cm and amount of work necessary for enlargement was 1.5×10^-4 joules

Answers

Answer:

[tex]T=7.5*10^{-5}[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=2cm[/tex]

Work done [tex]W=1.5×10^-4 joules[/tex]

Generally the equation for Work done is mathematically given by

 [tex]W=T.dA[/tex]

Therefore

 [tex]T=\frac{W}{dr}[/tex]

 [tex]T=\frac{1.5*10^{-4}}{2}[/tex]

 [tex]T=7.5*10^{-5}[/tex]

a body is moving along a circular path 'r'. what will be the distance and displacement of the body when it completed half a revolution?​

Answers

Answer: Displacement is the shortest distance travelled from the initial point to the final point. After half revolution the displacement is the length of the diameter which is equal to 2r. Hence the displacement is 2r.

After half of a revolution ...

==> Distance = π•r

==> Displacement = 2•r

Answer all these questions

What type of waves can only travel through a medium?
What is pitch?
What is the relationship between amplitude and volume?
How does the type of medium affect a sound wave?
Describe the relationship between frequency and wavelength.

Answers

Answer:

mechanical waves,

.

the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.

.

If the amplitude increases the volume increases and vice versa.

.

The type of medium affects a sound wave as sound travels with the help of the vibration in particles.

.

The higher the frequency, the shorter the wavelength.

Explanation:

Answer:

1 . Soundwave

2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz

3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound

4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves

Having the correct posture and the degree or severity of braking, acceleration and steering inputs have a direct result on the ability of a motorist to effectively address changes in __________?

Answers

Answer: Vehicle Balance

Explanation:

Vehicle balance simply means how the weight of a vehicle is distributed across its tires which connects to the road

It should be noted that there'll be a shift in the balance of a vehicle when the braking, acceleration, or turning bring about a scenario in which the weight of th vehicle moves from one area to another.

TRUE OR FALSE. when an object changed direction without changing its speed, it is not accelerating

Answers

Answer:

True.

Explanation:

The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... But the fact is that an accelerating object is an object that is changing its velocity.

Capacitance (C) is measured in farads, where 1 farad is equivalent to 1 coulomb per volt. Resistance (R) is measured in ohms, and 1 ohm is equal to 1 volt per ampère. The coulomb is defined as the amount of charge passing when a current of 1 ampère flows for 1 second. What is the unit of RC expressed in its simplest form?

Answers

Ahhh ok so much better now I got a good day amp a Relationship was the day amp the

When fundamental units are combined, they result in derived units. RC (which means Resistance Capacitance) is a derived unit and its unit in the simplest form is Coulomb per Ampere (C/A)

Given that:

Capacitance (C) [tex]\to[/tex] Farads (f)

and

[tex]1f = 1\frac CV[/tex] ----- 1 farad = 1 capacitance per volt

Resistance (R) [tex]\to[/tex] Ohms [tex]\Omega[/tex]

[tex]1 \Omega = 1\frac{V}{A}[/tex]

The unit of RC is the product of the unit of R by the unit of C.

i.e.

[tex]RC = 1f \times 1\Omega[/tex]

Substitute [tex]1f = 1\frac CV[/tex]

[tex]RC = 1\frac CV \times 1\Omega[/tex]

Substitute [tex]1 \Omega = 1\frac{V}{A}[/tex]

[tex]RC = 1\frac CV \times 1\frac VA[/tex]

Cancel out volts (V)

[tex]RC = 1\frac CA[/tex]

[tex]\frac CA[/tex] means Coulomb per Ampere

Hence, the unit of RC is Coulomb per Ampere.

Read more about units at:

https://brainly.com/question/10167613

The force that the left team pulls with is 1000 N. If the right team's total mass is 300 kg and they accelerate by 1.2 m/s2, what is the force of resistance on the right team

Answers

Answer:

the force of resistance on the right team is 360 N

Explanation:

Given;

force of the left team, = 1000 N

total mass of the right team, m = 300 kg

acceleration of the right team, a = 1.2 m/s²

The force of resistance of the right team is calculated as;

Force = mass x acceleration

Force, F = 300 x 1.2

Force = 360 N

Therefore, the force of resistance on the right team is 360 N

When the E string of a guitar (frequency 330 Hz) is plucked, the sound intensity decreases by a factor of 2 after 4 s. Determine

Answers

Answer:

[tex]Q=50.3[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=330Hz[/tex]

Sound intensity drop [tex]I_d=2[/tex]

Time [tex]T=4s[/tex]

Therefore

Sound intensity Ratio

 [tex]\frac{I}{I_x}=\frac{1}{2}[/tex]

Generally the equation for Sound intensity is mathematically given by

 [tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]

 [tex]\frac{1}{2}=e^{-4\ \=t}[/tex]

 [tex]\=t =5.8s[/tex]

Generally the equation for Quality Factor is mathematically given by

 [tex]Q=2 \pi\frac{E}{\triangle E}[/tex]

 [tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]

 [tex]Q=50.3[/tex]

Please answer will mark brainleist

Answers

[tex]option \: (a) \: is \: correct.[/tex]

Explanation:

Yes, I was wrong. Pressure increases as the area decreases.

As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.

As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.

Answer:

Option number B

Explanation:

The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases

After landing the aeroplane's momentum becomes zero. Explain how

the law of conservation holds here.​

Answers

Answer:

The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions.

Which is the best analysis of Eli’s statement?

Answers

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

The boiling point of a substance is _72 degree Celsius. This temperature will be equivalent to Kelvin scale is-------.

Answers

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

Boiling point = 72°C

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

Which component of weight is cause for S.H.M of bob simple pendulum

Answers

Explanation:

The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.

hope it helps you


[tex]what \: is \: mirror \: {?}[/tex]

Answers

A thing that is made out of glass and you can see a yourself in

A gas at a pressure p is compressed to half it original volume and twice its original temperature. The new pressure is

Answers

Answer:

4p

Explanation:

If you halve the volume the pressure will double as they are inversely proportional. If you double the temperature the particles have double the kinetic energy so the pressure will double again.

So:

p×2×2 = 4p

Answer:

P V = n R T

P2 V2 / (P1 V1) = T2 / T1

P2 = (T2 / T1) (V1 / V2)  P1   =   2 * 2 = 4

When the spacecraft is at the halfway point, how does the strength of the gravitional force on the spaceprobe by Earth compre with the strength

Answers

Solution :

When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.

The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.

1) Convert the following:
I) 65 kg into g
ii) 87570 seconds into hour
iii) 7.5 km into m​

Answers

Answer:

65000g

24.325 hrs

7500m

Answer:

I) 65000 g   II)24.325 hours  III)7500 m

Explanation:

I) 1 kg = 1000 g

65 kg = 65 * 1000 g = 65000 g

II) 1 hour = 3600 seconds

1 second = 1/3600 hours

87570 seconds = 87570 * 1/3600 hours =24.325 hours

III) 1 km = 1000 m

7.5 km = 7.5 * 1000 m = 7500 m

6. traction a. friction between a tire and the road.b. pushes a moving object out of a curve and into a straight linec. the ability of a car to hold a straight lined. a road higher in the center than on either edge 7. kinetic energy a.a force that keeps objects moving in a straightb. reduces the effects of inertiac. energy of motiond. a road higher in the center than on either edge 8. force of impact a. a force that keeps objects moving in a straight line.b. a road higher in the center than on either edgec. the force with which a moving vehicle hits another objectd. perception distance, reaction distance, and braking distance

Answers

Answer:

6. a. friction between a tire and the road

7. c. energy of motion

8. c. the force with which a moving vehicle hits another object

Explanation:

6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.

So, the answer is a

7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.

So, the answer is c

8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.

So, the answer is c.

Look at the distance-time graph below. It shows Angela's journey as she walks to the end of the road and back. The end of the road is 40 m away. After how many seconds did she arrive back where she started?

Answers

Answer:

Explanation:

If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.

Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.

How long did Angela take?

The end of the road is 40m and coming back is also 40 m. The total distance is:

= 40 + 40

= 80m

The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.

Find out more uses of distance-time graphs at https://brainly.com/question/13877898.

#SPJ6

Other Questions
Two cylindrical resistors are made from copper. The first one is of length L and of radius r . The 2nd resistor is of length 6L and of radius 2r. The ratio of these two resistances R1/R2 is: A pair of forces with equal magnitude, opposite directions, and different lines of action is called a "couple." When a couple acts on a rigid object, the couple produces a torque that does not depend on the location of the axis. The drawing shows a couple acting on a tire wrench, each force being perpendicular to the wrench. Determine an expression for the torque produced by the couple when the axis is perpendicular to the tire and passes through the following. Express your answers in terms of the magnitude F of the force and the length L of the wrench. write the following sets in the set builder form C={1,4,9,16,25} Which is the graph of y = 3x + 1 - 2? What is the equation of the line that has a slope of 3 and passes through the point (1, -2) Factorize : 4(x+y)^2 -9(x-y)^2 What is the role of a consumer in the economy nation How did the Enclosure Acts help to fuel the Industrial Revolution ? Uma empresa do ramo de confeces produz e comercializa calas jeans. Se x representa a quantidade produzida e comercializada (em milhares de reais) e L(x) = -x + 8x 16 representa o lucro (em milhares de reais) da empresa para x unidades, ento quando L(x) = 0 a empresa ter produzido e comercializadas quantas unidades dessas calas jeans? * Which are correct representations of the inequality -3(2x - 5) 19.Find dy/dx of the function y = f(x) definded by x+xy-y2 = 4. The following table describes some landforms.LandformCreated ByFound inWind erosion Water or glacial erosion Depositions Deserts Coasts MountainsYesNoYesYesNoNo| AYesNoBYesYesYesNoNoYesNoNoNoYesNoNoDNoNoNoNoWhich landform is most likely a coastline?Landform ALandform BO Landform CLandform D L. Read the following sentences. Write whether they show problem or solution. Write your answer on the blank. 1. Some people are not disposing their garbage properly. 2. The local government issued an order of dredging the rivers. 3. Electric bill is so high that many families find it hard to pay. 4. Turn off lights and appliances when not in used. 5. Many forests are denuded because of illegal logging. 6. Students can not have an access of the internet. 7. The children are having hard time in studying because of gadgets. 8. Anna left the room messy. 9. Father raises animals in the backyard. 10. There are many out of school youths engaged in illegal used of drugs. A student dropped a pea size amount of K2CO3 into a solution of HCl(aq). He observed the formation of gas bubbles and collected the gas into another test tube. The student performed a splint test and observed that the splint was extingished when he placed the splint into the test tube of the gas. What can be said about the results of this students experiment?a. The student completed the experiment correctly and there were no errors in the experiment.b. The experiment was performed incorrectly. K2CO3 doesn't react with HCl. Therefore, the student picked up the wrong compound when conducting the experiment.c. The student performed the splint test incorrectly. He should of observed the splint flare up when the splint was placed in the test tube.d. The student performed the splint test incorrectly. He should of observed a popping sound when the splint was placed in the test tube. Harmonics a.are components of a complex waveform. b.have frequencies that are integer multiples of the frequency of the complex waveform. c.are pure tones. d.have sinusoidal waveforms. e.all of the above they help me ? is the last someone please Half a league, half a league,Half a league onward,All in the valley of DeathRode the six hundred:'Forward, the Light Brigade!Charge for the guns' he said:Into the valley of DeathRode the six hundred.'Forward, the Light Brigade!'Was there a man dismay'd ?Not tho' the soldier knewSome one had blunder'd:Theirs not to make reply,Theirs not to reason why,Theirs but to do and die,Into the valley of DeathRode the six hundred.Cannon to right of them,Cannon to left of them,Cannon in front of themVolley'd and thunder'd;Storm'd at with shot and shell,Boldly they rode and well,Into the jaws of Death,Into the mouth of HellRode the six hundred.Flash'd all their sabres bare,Flash'd as they turn'd in airSabring the gunners there,Charging an army whileAll the world wonder'd:Plunged in the battery-smokeRight thro' the line they broke;Cossack and RussianReel'd from the sabre-stroke,Shatter'd and sunder'd.Then they rode back, but notNot the six hundred.Cannon to right of them,Cannon to left of them,Cannon behind themVolley'd and thunder'd;Storm'd at with shot and shell,While horse and hero fell,They that had fought so wellCame thro' the jaws of Death,Back from the mouth of Hell,All that was left of them,Left of six hundred.When can their glory fade?O the wild charge they made!All the world wonder'd.Honour the charge they made!Honour the Light Brigade,Noble six hundred! Poet Name - Alfred Lord. TennysonWas there a man dismay'd ?Not tho' the soldier knewSome one had blunder'da.who is the man speaker referring to?b.what does speaker mean In the second line?c.what is referring to in the third line and what do you think their emotions would have been? Identify the intermolecular attractions for dimethyl ether and for ethyl alcohol. Which molecule is expected to be more soluble in water? Explain. During a reaction, H for reactants is 750 kJ/mol and H for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)Group of answer choicesIt is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed. MC Qu. 152 Adams Manufacturing allocates... Adams Manufacturing allocates overhead to production on the basis of direct labor costs. At the beginning of the year, Adams estimated total overhead of $364,800; materials of $418,000 and direct labor of $228,000. During the year Adams incurred $426,000 in materials costs, $415,400 in overhead costs and $232,000 in direct labor costs. Compute the overhead application rate.