Answer:
DNS provides a name to number (IP address) mapping or translation, allowing internet users to use, easy to remember names, and not numbers to access resources on a network and the Internet.
Thank you.......
Have a good day......
Answer:
DNS stand for Domain Name System
Explanation:
The benefits of DNS are that domain names: can map to a new IP address if the host's IP address changes. are easier to remember than an IP address. allow organizations to use a domain name hierarchy that is independent of any IP address assignment.
Is this one are you looking for??
find the summation of even number between (2,n)
Answer:
The program in python is as follows:
n = int(input("n: "))
sum = 0
for i in range(2,n+1):
if i%2 == 0:
sum+=i
print(sum)
Explanation:
This gets input n
n = int(input("n: "))
This initializes sum to 0
sum = 0
This iterates through n
for i in range(2,n+1):
This checks if current digit is even
if i%2 == 0:
If yes, take the sum of the digit
sum+=i
Print the calculated even sum
print(sum)
A student is conducting an experiment in which he adds an inhibitor to an enzyme-catalyzed reaction that contains alkaline phosphatase. When the student first adds the inhibitor, the reaction rate decreases, however, he can return the reaction rate to normal by adding a large quantity of substrate. What type of inhibitor is the student using, non-competitive or competitive?
Answer:
competitive
Explanation:
An inhibitor is a substance that hinders the action of an enzyme. An inhibitor may be competitive or non competitive.
A competitive inhibitor is an inhibitor that is very similar to the substrate hence it binds to the enzyme instead of the substrate. A noncompetitive inhibitor binds to a site that is different from the active site. This site is called an allosteric site.
If we look at the experiment described in the question, the reaction rate decreases upon addition of the inhibitor. This effect is reversed by adding a large quantity of substrate.
The implication of this observation is that the enzyme and the inhibitor compete for the active site on the substrate.
Hence the inhibitor is a competitive inhibitor.
Answer:
competitive inhibitor is the students using
You trained a binary classifier model which gives very high accuracy on thetraining data, but much lower accuracy on validation data. The following maybe true:
a. This is an instance of overfitting.
b. This is an instance of underfitting.
c. The training was not well regularized.
d. The training and testing examples are sampled from different distributions.
Answer:
a. This is an instance of overfitting.
Explanation:
In data modeling and machine learning practice, data modeling begins with model training whereby the training data is used to train and fit a prediction model. When a trained model performs well on training data and has low accuracy on the test data, then we say say the model is overfitting. This means that the model is memorizing rather Than learning and hence, model fits the data too well, hence, making the model unable to perform well on the test or validation set. A model which underfits will fail to perform well on both the training and validation set.
The following method is intended to return true if and only if the parameter val is a multiple of 4 but is not a multiple of 100 unless it is also a multiple of 400. The method does not always work correctly public boolean isLeapYear(int val) if ((val 4) == 0) return true; else return (val & 400) == 0; Which of the following method calls will return an incorrect response?
A .isLeapYear (1900)
B. isLeapYear (1984)
C. isLeapYear (2000)
D. isLeapYear (2001)
E. isLeapYear (2010)
Answer:
.isLeapYear (1900) will return an incorrect response
Explanation:
Given
The above method
Required
Which method call will give an incorrect response
(a) will return an incorrect response because 1900 is not a leap year.
When a year is divisible by 4, there are further checks to do before such year can be confirmed to be a leap year or not.
Since the method only checks for divisibility of 4, then it will return an incorrect response for years (e.g. 1900) that will pass the first check but will eventually fail further checks.
Hence, (a) answers the question;
Accessing disk is much slower than accessing memory. As a result, many file systems have been designed with various optimizations to improve performance. What is an example of file system performance optimization
Answer:
An example of file system performance optimization is Caching - i.e. keep in memory a collection of blocks that logically belong on the disk, for performance reasons.
Explanation:
Caching - i.e. keep in memory a collection of blocks that logically belong on the disk, for performance reasons.
The ultimate frequent method employed to decrease the duration of disk elucidated as a collection of books i.e similar kind that is preserved in invisible area.
Assume that a file contains students’ ids, full names, and their scores (Assignments grade, quizzes grade, Midterm grade, Practical exam grade, and final exam grade) (each column is separated by $). You are required to write a C program to do the following:
• Using the concept of parallel arrays create records for students with above attributes (id, full name, score).(you are not allowed to use structure)
• Ask the user to enter the input file name and read it (suppose that, there are different files you could read data from). Read the data from the file and store it in record for students, which has IDs, Names, and Scores. The IDs should be declared as integers, the Names as a two-dimensional array of characters and the Scores as doubles. Assume that the maximum length of full name of any student is 50 characters. Also, you may assume that there will be No more than a 1000 student records in the file.
• Calculate the final grade as the flowing:
Grade= (Assignment)*15%+(Quizzes) *15%+(Midterm exam) *25%+(Practical Exam)
*10%+(Final) *35% Assuming that data in files are arranged in same order of the above equation with respect to grades
Hint: read form file, calculate the final score, and store it in the record before going to the next step.
• Display the following menu to the user and read the entered choice:
1) Sort data in ascending order according to students’ IDs and then display it.
2) Sort data in ascending order according to students’ names and then display it.
3) Sort data in descending order according to students’ scores and then display it.
Note: After running any of the above menus items, ask the user if he/she would like to save the current result, if so, prompt user to enter file name.
4) Ask the user to enter a student ID and display his score
5) Ask the user to enter a student name and display his score
6) Exit the program
The program should keep displaying the menu until the user selects to exit from the program.
Implement each of the first five menu options as a separate function.
The attached file “data.txt” is for test.
design an if-then-else statement or a flowchart with a dual alternative decision structure that displays speed is normal if the speed variable is within the range of 24 to 56. if speed holds a value outside this range, display speed is normal
Answer:
The if statement is as follows:
if speed>=24 and speed <=56 then
print "speed is normal"
else
print "speed is abnormal"
See attachment for flowchart
Explanation:
The condition is straight forward and self-explanatory
This is executed if speed is between 24-56 (inclusive)
if speed>=24 and speed <=56 then
print "speed is normal"
If otherwise, this is executed
else
print "speed is abnormal"
NO LINKS
Write a C++ program to accept a 5 digit integer and to validate the input based on the following rules.
Rules
1) The input number is divisible by 2. 2) The sum of the first two digits is less than last two digits. if the input number satisfies all the rules, the system prints valid and invalid, otherwise,
Example 1:
Enter a value: 11222
Output: Input number is valid
Example 2:
Enter a value: 1234
Output: Input number is invalid
Answer:
#include <iostream>
#include <string>
#include <regex>
using namespace std;
int main()
{
cout << "Enter a 5-digit number: ";
string number;
cin >> number;
bool valid = regex_search(number, regex("^\\d{4}[02468]$"));
if (valid) {
valid = stoi(number.substr(0, 1)) + stoi(number.substr(1, 1))
< stoi(number.substr(3, 1)) + stoi(number.substr(4, 1));
}
cout << number << (valid ? " is valid" : " is invalid");
}
Explanation:
Regular expressions can do all of your checking except for the sum of digits check. The checks are i.m.o. easiest if you don't treat the input as a number, but as a string with digits in it.
The regex means:
^ start of string
\d{4} exactly 4 digits
[02468] one of 0, 2, 4, 6 or 8 (this is what makes it even)
$ end of string
Design a class named largeIntegers such that an object of this class can store an integer of any number of digits. Add operations to add, subtract, multiply, and compare integers stored in two objects. Also add constructors to properly initialize objects and functions to set, retrieve, and print the values of objects. Write a program to test your class. g
Answer:
Here the code is given as follows,
Explanation:
Code:
import java.util.Scanner;
//created class named largeintegers
class largeintegers{
//class can hold a long number
long number;
//constructor to set number
largeintegers(long number){
this.number=number;
}
//getNumber method to get number
long getNumber(){
return number;
}
//below are some basic operations
long addition(long num1,long num2){
return num1+num2;
}
long subtract(long num1,long num2){
return num1-num2;
}
long multiply(long num1,long num2){
return num1*num2;
}
boolean compare(long num1,long num2)
{
return num1>num2;
}
public static void main(String[] args) {
//declared to long numbers
long number1,number2;
//scanner class to take user input
Scanner sc= new Scanner(System.in);
//taking input numbers
System.out.println("Enter a Number ");
number1=sc.nextLong();
System.out.println("Enter 2nd Number :");
number2=sc.nextLong();
//created two objects
largeintegers object=new largeintegers(number1);
largeintegers object2=new largeintegers(number2);
//displaying two numbers
System.out.println("Entered Numbers ");
System.out.println(object.getNumber());
System.out.println(object2.getNumber());
//calling basic methods using created objects
System.out.println("Some Operations on Given two Numbers ");
System.out.println("Addition:"+object.addition(object.getNumber(), object2.getNumber()));
System.out.println("Subtraction:"+object.subtract(object.getNumber(), object2.getNumber()));
System.out.println("Multiplication:"+object.multiply(object.getNumber(), object2.getNumber()));
System.out.println("Comparison:");
if(object.compare(object.getNumber(), object2.getNumber())==true)
{
System.out.println("First Number is Greater than Second Number ");
}
else
{
System.out.println("Second Number is Greater than First Number ");
}
sc.close();
}
}
Output:-
List the four workplace trends discussed in the lecture.
Answer:
The global economy, teamwork, technology, and diversity
Answer:
Trends in the workplace are constantly evolving and the latest trends are tough to maintain. Ten years ago, employers did not care about open businesses, advantages like ping pong tables and lunches on Fridays, or standing desks and unbounded time off. As times change, however, companies have to adopt trends to increase productivity and employee involvement in the workplace.
Explanation:
Global economy: The global economy refers to the worldwide interconnected economic activities between several countries. These economic activities could impact the countries concerned either positively or negatively.There are several features in the global economy, for example:
Globalization.International trade.International finance.Global investment.TEAMWORK: "To work together with a group of people to achieve an objective. Teamwork is often an important part of a company, as colleagues often have to work together well and to try their best in all circumstances. Work in a team means that, despite any personal conflicts between people, people will try to cooperate, use their individual abilities, and provide constructive feedback."It is selfless teamwork. It concentrates on the ultimate objective. Teamwork is based on the idea that the whole exceeds the sum of its components. It's the traditional idea of "one plus one is equal to three." Personalities and the ability to create personal conflicts are different. However, the differences between the members of the team become strengths and goals, if the whole team focuses on doing great work.
TECHNOLOGY: The skills, methods, and processes used to achieve objectives are technology. The technology to use is:
Manufacture products and servicesachieve objectives such as scientific research or sending a moon spaceshipSolve issues like sickness or starvationWe already do things, but easier.Knowledge of how to do things maybe technology. Embedding machines are examples. This enables others to use the machines without knowing how they function. By taking something, changing it, and producing results, the technological system uses the technology. They are also known as systems of technology.
Developing and using fundamental tools is the simplest form of technology. The discovery of fire and the Revolution made food more readily available. Additional inventions such as the ship and the wheel have helped people and themselves to transport goods. IT, like the printer, the phone, and the internet, has led to Globalization.
DIVERSITY:Diversity is a range of differences in the human race, ethnicity, sexuality, age, social class, physical capacity or attributes, religious or ethical values systems, nationality, and political faith.
Inclusion is participation and empowerment, which recognize everybody's inherent worth and dignity. An included university supports and promotes the sense of belonging; respects its members' talents, beliefs, backgrounds, and livelihoods. They respect and practice them.
Answer:
The global economy, teamwork, technology, and diversity
Explanation:
Holly the Hacker has a list of 100,000 common passwords. She wants to use this list to break into UNIX-like systems that use a password file with lines consisting of:
The question is incomplete. The complete question is :
Holly the Hacker has a list of 100,000 common passwords. She wants to use this list to break into UNIX-like systems that use a password file with lines consisting of:
The user's ID in plaintext.
10 bits of randomly chosen "salt," in plaintext.
The user's password, concatenated with the salt, and then encrypted.
There are very many such systems around the world, and Holly plans to steal the password files from as many as she can. The average system has 50 users in its password file.
Holly wants to create a master list of the encrypted versions of all the 100,000 passwords on her list, encrypted with all possible salt values. To create this master list, approximately how many encryptions of a password-concatenated-with-salt would Holly have to perform?
A. 2 million
B. 5 million
C. 100 million
D. 1 million
Solution :
It is given that the hacker, Holly wants break into the UNIX-like systems using 100,000 common passwords that she has on her list. The system has at an average of 50 users in the password files.
Therefore, to create a master list, Holly have to perform about 50 x 100,000 = 5,000,000 encryptions for the password concatenated-with-salt.
Thus the correct option is option (B). 5 million
An entertainment application would most likely do which of the following?
A. allow users to watch popular movies and TV shows
B. connect users with social and business contacts
C. confirm users' travel plans
D. teach users a new language
Answer:
A is the answer to this question
Answer:
A. allow users to watch popular movies and TV shows
Explanation:
what are Manuscript signs
Answer: See explanation
Explanation:
Manuscript signs, refers to the marks or the symbols that are used within a manuscript in order to show the necessary corrections which should be made during the preparation of a document.
Manuscript formatting is vital as it makes the manuscript easier to assess. In a situation whereby manuscripts are poorly formatted, it can be turned down by agents and publishers.
When performing the ipconfig command, what does the following output line depict if found in the tunnel adapter settings?
IPv6 Address: 2001:db8:0:10:0:efe:192.168.0.4
a. IPv6 is disabled.
b. The addresses will use the same subnet mask.
c. The network is not setup to use both IPv4 and IPv6.
d. IPv4 Address 192.168.0.4 is associated with the global IPv6 address 2001:db8:0:10:0:efe
Answer:
d. IPv4 Address 192.168.0.4 is associated with the globe IPv6 address 2001:db8:0:10:0:efe
Explanation:
The adapter setting will be associated with the global IP address. When Ipconfig command is operate the IP address finds the relevant domain and then address will use a different subnet. The network will use both IPv4 and IPv6 subnets in order to execute the command.
In the tunnel adapter settings, when performing the ipconfig command, the given output line depicts: D. IPv4 Address 192.168.0.4 is associated with the global IPv6 address 2001:db8:0:10:0:efe.
What is a tunnel adapter?A tunnel adapter can be defined as a virtual interface which is designed and developed to encapsulate packets as a form of tunnel or virtual private network (VPN) protocol while sending them over another network interface.
In Computer networking, an output line of "IPv6 Address: 2001:db8:0:10:0:efe:192.168.0.4" in the tunnel adapter settings simply means that an IPv4 Address 192.168.0.4 is associated with the global IPv6 address 2001:db8:0:10:0:efe.
Read more on IP address here: https://brainly.com/question/24812743
calculateAverageSalary(filename): Returns the average salary of all employees rounded down to 2 decimal points highestHireMonth(filename): Returns the month (integer) during which most hires were made over the years getMonth(date): Helper function to extract and return the month number from a date given as a string input of format MM/DD/YY. Return type should be an int.
Answer:
An extract from the answer is as follows:
for i in salary:
total_salary+=float(i)
count+=1
return round(total_salary/count,2)
def getMonth(date):
ddate = []
for i in date:
ddate.append(i.split('/')[0])
mode = int(max(set(ddate), key=ddate.count))
return mode
def highestHireMonth(filename):
month = []
See explanation for further details
Explanation:
Given
Attachment 1 completes the question
The complete answer could not be submitted. So, I've added it as an attachment.
See attachment 2 for program source file which includes the main method.
Comments are used to explain difficult lines
space bar in computer
Answer: Its the one in the middle the really long thingy it looks like a rectangle
Explanation:
ITS IN THE MIDDLE
Use the drop-down menus to complete the steps for rearranging the layout of a form.
1. Open the form in
✔ Design
view.
2.
✔ Press Ctrl+A
to highlight all of the fields.
3. Under Form Design Tools, select the
✔ Arrange
tab.
4. Choose the Remove Layout button.
5. Reorder and arrange the layout as desired.
6. Review the changes in the
✔ Layout
view.
7. Click Save.
Just did it.
Answer:
1. Open the Form
2. Arrange tabs
3. Layout view
4. Reoder and arrange the Layout as desired
5. Press Ctrl + A
6. Choose the remove Layout button
7. Click Save
I am not sure
The complete steps for rearranging the layout of a form are in the order:
1, 2, 3, 4, 5, 6, and 7.What is a form layout?A form layout is the arrangement of all elements, components, and attributes of your form and the placement of the form on a specific page.
When rearranging the layout of the form, the steps to take are as follows:
Open the form in Design View (this means that the form needs adjustment and rearrangement.Press Ctrl+A (this control all function) helps to highlight all the features in the form layout fields.Under Form Design Tools, select the Arrange tab.Choose the Remove Layout button.Reorder and arrange the layout as desired.Review the changes in the Layout view.Click Save.Learn more about form layout arrangement here:
https://brainly.com/question/9759966
#SPJ2
1. Write a generic method that compares its 2 arguments using the equals method and returns true if they are equal and false otherwise. Ensure that the name of your method includes your last name.
Answer:
Explanation:
The following piece of code is written in Java. It creates the method as requested that takes in two generic objects and compares them using the .equals() built in Java method. This method will return True if the objects are identical or False if they are not. A test case is used in the code and the output can be seen in the attached image below.
public static <T> boolean comparePerez(T a, T b) {
return a.equals(b);
}
Which of the following statements about the relationship between hardware and software is true? a) Hardware can be present in intangible form. b) A flash drive is an example of software. c) Software and hardware can act independently of each other. d) Software consists of instructions that tell the hardware what to do.
Answer:
C
Explanation:
The statements about the relationship between hardware and software that is true is: D. Software consists of instructions that tell the hardware what to do.
A hardware can be defined as the physical components of an information technology (IT) system that can be seen and touched such as:
RouterSwitchKeyboardMonitorMouseConversely, a software refer to a set of executable codes (instructions) that is primarily used to instruct a computer hardware on how it should process data, perform a specific task or solve a particular problem.
In conclusion, a software consist of a set of executable codes (instructions) that tell a computer hardware what to do.
Read more on hardware here: https://brainly.com/question/959479
1) It is possible to email a document
directly from the Word application.
O FALSE
O TRUE
Answer:
True
Explanation:
Using the celsius_to_kelvin function as a guide, create a new function, changing the name to kelvin_to_celsius, and modifying the function accordingly. Sample output with input: 283.15 10.0 C is 283.15 K 283.15 K is 10.0 C 1 def celsius_to_kelvin value.celsius): value_kelvin 0.0 value_kelvin - value.celsius + 273.15 return value kelvin DIO! 5 7. Your solution goes here 9 value c - 10.0 10 print(value.c, Cis', celsius.to kelvin(value.c), 'K) 12 value floatinput ) 13 print(value, Kis', kelvin_to_celsius(value. ). 'C"> Run
Answer:
The function is as follows:
def kelvin_to_celsius(value_kelvin):
value_celsius = 0.0
value_celsius = value_kelvin - 273.15
return value_celsius
Explanation:
This defines the function
def kelvin_to_celsius(value_kelvin):
This initializes value_celsius to 0
value_celsius = 0.0
This calculates value_celsius
value_celsius = value_kelvin - 273.15
This returns the calculated value_celsius
return value_celsius
१८. तलका शीर्षकमा १५० शब्दसम्मको निबन्ध लेख्नुहोस् :
(क) सुशासन र विकास
Answer:
n
Explanation:
Answer:
kkkkkkkkikkkkkkkkkkkiikkiiii
Which of the following statement is true? Single choice. (2 Points) Views are virtual tables that are compiled at run time All of the Mentioned Views could be looked as an additional layer on the table which enables us to protect intricate or sensitive data based upon our needs Creating views can improve query response time
Answer:
All of the mentioned views could be looked as an additional layer in the table which enables us to protect intricate or sensitive data based upon our needs.
Explanation:
View is a virtual table which executed a pre compiled query. It is a table in which selective portion of the data can be seen from one or more tables. Queries are not allowed in indexed views and adding column is not possible. Views can be looked as an additional layer in the virtual table which protects sensitive data.
A Key Factor in Controlling Your Anger Is Using Passive behaviour.T/F
Answer:
The answer is "True".
Explanation:
Assertiveness means that others are encouraged to be open, honest about their thoughts, wishes and feelings so how they can act properly. Assertive behavior: be open and communicate wishes, ideas and feelings, as well as encourage others to do likewise. Please visit our Emotional Regulation page. A major aspect is the ability to control your anger. Once you are quiet or aggressive, work very hard.
Which ONE of the following role players provides technical backup, trouble shooting and
computer literacy training?
1. Parents
2. Teachers
3. ICT Coordinator
4. Subject specialist
Answer:
C, ICT coordinator
Explanation:
ICT Coordinator provides technical backup, trouble shooting and computer literacy training.
ICT CoordinatorThis individual seems to be in charge of such gear as well as applications, as well as broadband connections.
This same coordinator also assists overall ICT policy development in schools, such as the formation of an ICT management committee, responsibility division, as well as communication with stakeholders.
Thus the response above i.e., "option 3" is correct.
Find out more information about ICT Coordinator here:
https://brainly.com/question/25168859
Create a method called nicknames that passes an array as a parameter. Inside the method initialize it to hold 5 names of your choice. Use the for each enhanced loop to print the elements of the array.
//======METHOD DECLARATION=========//
//method name: nicknames
//method return type: void
//method parameter: an array reference
public static void nicknames(String [] names){
//initialize the array with 5 random names
names = new String[] {"John", "Doe", "Brian", "Loveth", "Chris"};
//using an enhanced for loop, print out the elements in the array
for(String n: names){
System.out.print(n + " ");
}
}
Explanation:
The program is written in Java. It contains comments explaining important parts of the code. Kindly go through these comments.
A few things to note.
i. Since the method does not return any value, its return type is void
ii. The method is made public so that it can be accessible anywhere in and out of the class the uses it.
iii. The method is made static since it will most probably be called in the static main method (at least for testing in this case)
iv. The method receives an array of type String as parameter since the names to be stored are of type String.
v. The format of initializing an array manually should follow as shown on line 7. The new keyword followed by the array type (String), followed by the square brackets ([]) are all important.
vi. An enhanced for loop (lines 9 - 11) is a shorthand way of writing a for loop. The format is as follows;
=> The keyword for
=> followed by an opening parenthesis
=> followed by the type of each of the elements in the array. Type String in this case.
=> followed by a variable name. This holds an element per cycle of the loop.
=> followed by a column
=> followed by the array
=> followed by the closing parenthesis.
=> followed by a pair of curly parentheses serving as a block containing the code to be executed in every cycle of the loop. In this case, the array elements, each held in turn by variable n, will be printed followed by a space.
A complete code and sample output for testing purposes are shown as follows:
==================================================
public class Tester{
//The main method
public static void main(String []args){
String [] names = new String[5];
nicknames(names);
}
//The nicknames method
public static void nicknames(String [] names){
names = new String[] {"John", "Doe", "Brian", "Loveth", "Chris"};
for(String n: names){
System.out.print(n + " ");
}
}
}
==================================================
Output:John Doe Brian Loveth Chris
NB: To run this program, copy the complete code, paste in an IDE or editor and save as Tester.java
In the tiger exhibit at the zoo each of 24 tigers eat 26 lb of food each day how much pounds of food do tigers consume in a week?? answer this as fast as you can!!
Answer:
182 pounds of food
Explanation:
such as creating documents using word processing programs or when connecting to the internet.
A- computer indirect
B-supercomputers
C-computers direct
D-personal computer
Could someone explain the question and the answer cause it’s making no sense kind of, like does it mean is it a direct use of the computer or indirect use of the computer?
Answer: Last summer, my family and I took a trip to Jamaica. My favorite part of the trip was when we went to a place called the Luminous Lagoon. We ate dinner and waited for the sun to go down. Then we boarded a boat and went out into the lagoon. That’s when the magic started.
At first we could not see very much in the darkness except for the stars in the sky. After a few minutes, however, I noticed some fish swimming in the water. They didn’t look like ordinary fish. These fish were glowing! Our guide explained that the glow came from tiny creatures in the water called dinoflagellates. These little animals are not visible to us, but their bodies produce light using something called bioluminescence, just like fireflies. There are so many of these creatures in Luminous Lagoon that the water around them seems to glow.
After our guide explained these facts to us, he told us to put our hands in the water. I was not sure if it would work, but I tried it. When I did, my hand looked like it belonged to a superhero! It was glowing bright blue. I hope someday I get to return to the Luminous Lagoon. The lights in the water were much more entertaining than the ones in the sky.
Problem:
audio
The Greek prefix dinos- means “whirling” and the Latin root word flagellum means “whip”. What does dinoflagellate most likely mean as it is used in the passage?
audio
the production of light from an organism’s body
audio
the study of creatures that live in the ocean
audio
to move around underwater water like a fish
audio
an organism with a whip-like part it uses to move around in the water
Explanation:
As a basic user of SAP Business One, which feature of the application do you like most?
Answer:
I like the software most because it is completely for the sales department. I am very satisfied with what this software provides since I work as a sales specialist.
Explanation:
As an internal auditor, I first have to check and make sure the business is going through all reports and operations and that SAP Business One has helped me a lot with reporting features. I'm a huge fan of SAP Business One. And how this software is incredibly fully integrated when an accountancy provider creates a new customer name or adds a new item in every module, and the non-duplicate data feature secures the master data from any duplicate item.
Intuitive sales quotation and sales order functions help salespeople to develop deals that they can conclude. The mobile app adds to the software's usefulness fantastically.
In general, the system has a good monetary value. I would recommend it to everyone involved in the decision-making process and it is my favorite.
Write a python program that will accept monthly salary amounts greater than zero but less
than or equal to 400,000.00 until the user enters the character ‘e’. After the user
enters the character ‘e’, calculate the net pay of all salaries by deducting income tax at
a rate of 25%, pension of 5% and housing contribution of 2% from each salary
entered. Additionally, print the number of salaries that were entered in the program
along with the number of salaries that exceed 300,000.00
write a python program
The English alphabet has 26 letters starting from A and ending with Z. If we map the
first 26 numbers i.e 1 through to 26 to each letter in the alphabet, we could encode
messages using numbers. For example, 123 could be represented as ‘ABC’ and 26 could
be the letter ‘Z’. Write a program that accepts 10 integers from the user ranging from 1
- 26. After accepting the values, the program should determine and print the
corresponding letters.
It won't save the answer. Maybe I can give it to you in the comment.
You can message me if you want. I cannot post the answer in the comment too:(
