Answer:
[tex]\boxed {\boxed {\sf 4.685 \times 10^{24} \ Fe \ atoms}}[/tex]
Explanation:
We are asked to convert grams of iron to atoms of iron.
1. Convert Grams to MolesFirst, we convert grams to moles. We use the molar mass or the mass in 1 mole of a substance. This is found on the Periodic Table because the molar mass is equal to the atomic mass, but the units are grams per mole instead of atomic mass units. Look up iron's molar mass.
Fe: 55.84 g/molWe convert using dimensional analysis, so we must set up a ratio using the molar mass.
[tex]\frac {55.84 \ g \ Fe}{ 1 \ mol \ Fe}[/tex]
We are converting 434.52 grams to moles, so we multiply by this value.
[tex]434.52 \ g \ Fe *\frac {55.84 \ g \ Fe}{ 1 \ mol \ Fe}[/tex]
Flip the ratio so the units of grams of iron cancel.
[tex]434.52 \ g \ Fe *\frac { 1 \ mol \ Fe}{55.84 \ g \ Fe}[/tex]
[tex]434.52 *\frac { 1 \ mol \ Fe}{55.84}[/tex]
[tex]\frac { 434.52}{55.84} \ mol \ Fe[/tex]
[tex]7.781518625 \ mol \ Fe[/tex]
2. Convert Moles to AtomsNext, we convert moles to atoms. We use Avogadro's Number or 6.02 ×10²³. It is the number of particles (atoms, molecules, formula units, etc) in 1 mole of a substance. For this problem, the particles are atoms of iron. We set up another ratio using this number.
[tex]\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 \ mol \ Fe}[/tex]
Multiply by the number of moles we calculated.
[tex]7.781518625 \ mol \ Fe *\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 \ mol \ Fe}[/tex]
The units of moles of iron cancel.
[tex]7.781518625 *\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 }[/tex]
[tex]4.68447421 \times 10^{24} \ atoms \ Fe[/tex]
The correct answer choice is Choice 3: 4.685 × 10²⁴ atoms of iron.
What is the balanced equation for the reaction of lithium metal with fluorine gas? Li ( s ) + F ( g ) → LiF ( s ) Li ( s ) + F 2 ( g ) → LiF ( s ) 2 Li ( s ) + F 2 ( g ) → 2 LiF ( s ) Li ( s ) + F 2 ( g ) → LiF
Answer:
2Li(s) + F2(g)→2LiF(s)
Explanation:
a team of engineers has decided to design a new shoe for people suffering from a painful foot condition. What should the engineers do during the planning stage
team of engineers has decided to design a new shoe for people suffering from a painful foot condition. What should the engineers do during the planning stage
what substances will make salt when combined?
vinegar and soda
soda and wine
detergent and ammonia
fertilizer and vinegar
Answer:
vinegr and soda ..................
........
Answer:
acid + base = salt
so the answer is vinegar and soda
Explanation:
hope it helps you
Mark my answer as brainlist
have a good day
An analytical chemist is titrating of a solution of hydrazoic acid with a solution of . The of hydrazoic acid is . Calculate the pH of the acid solution after the chemist has added of the solution to it.
Answer:
pH = 12.43
Explanation:
...is titrating 212.7 mL of a 0.6800 M solution of hydrazoic acid (HN3) with a 0.2900 M solution of KOH. The p Ka of hydrazoic acid is 4.72. Calculate the pH of the acid solution after the chemist has added 571.6 mL of the KOH solution to it.
To solve this question we need to know that hidrazoic acid reacts with KOH as follows:
HN3 + KOH → KN3 + H2O
Moles KOH:
0.5716L * (0.2900mol /L) =0.1658 moles of KOH
Moles HN3:
0.2127L * (0.6800mol/L) = 0.1446 moles HN3
As the reaction is 1:1, the KOH is in excess. The moles in excess of KOH are:
0.1658 moles - 0.1446 moles =
0.0212 mol KOH
In 212.7mL + 571.6mL = 784.3mL = 0.7843L
The molarity of KOH = [OH-] is:
0.0212 mol KOH / 0.7843L = 0.027M = [OH-]
The pOH is defined as -log [OH-]
pOH = -log 0.027M
pOH = 1.57
pH = 14 - pOH
pH = 12.43
Which of the following is an example of a scientific theory?
Matter can be neither created nor destroyed.
Force equals mass times acceleration.
Matter behaves the way it does because it is made of atoms.
There is probably life on Mars.
C. Matter behaves the way it does because it is made of atoms.
Answer:
Matter can neither be created nor destroyed
Explanation:
Mark me. as brainliest
A functional group introduces heteroatoms into a carbon chain to increase
polarity.
chain length.
molecular mass.
reactivity.
Answer:
reactivaty
Explanation:
here you go for the answer
A 1 L container originally holds 0.4 mol of N2, 0.1 mol of O2, and 0.08 mole of NO. If the volume of the container holding the equilibrium mixture of N2, O2, and NO is decreased to 0.5 L without changing the quantities of the gases present, how will their concentrations change
Answer:
a) [tex]N_2=0.8mol/L[/tex]
b) [tex]O_2=0.2mol/L[/tex]
c) [tex]NO=0.16mol/L[/tex]
Explanation:
From the question we are told that:
Moles 0f Nitrogen [tex]N_2=0.4[/tex]
Moles 0f Oxygen [tex]O_2=0.1[/tex]
Volume Decrease [tex]V_2=0.5L[/tex]
Generally, the equation for Concentration is mathematically given by
[tex]C=\frac{moles}{V}[/tex]
For Nitrogen
[tex]N_2=\frac{0.4}{0.5}[/tex]
[tex]N_2=0.8mol/L[/tex]
For Oxygen
[tex]O_2=\frac{0.1}{0.5}[/tex]
[tex]O_2=0.2mol/L[/tex]
For Nitrogen
[tex]NO=\frac{0.08}{0.5}[/tex]
[tex]NO=0.16mol/L[/tex]
The correct geometry around oxygen in CH3OCH3 is
(a). linear. (b). bent. C). tetrahedral/(a). trigonal planar
Explanation:
the force of the lone pairs from the bottom would cancel out the force of the lone pairs from the top. Thus, the molecule will be linear.
convert 14.72 kg to ____ mg
Answer:
14720000
Explanation:
1 kg = 1000000 mg
14.72 kg = 14.72 x 1000000
=14720000
Please Mark me brainliest
which of the following measurements is equivalent to 5.461x10^-7m?
Answer:
B. 0.0000005461m
I used the method of moving the decimal.
An object with a mass of 3kg has a force of 9 newtons applied to it. What
is the resulting acceleration of the object?
Answer:
3 m/s^2
Explanation:
m = 3 kg
F = 9 N
Use Newton's Second Law: F = ma
9 = 3a
a = 3 m/s^2
Plssssssssss answer this question
Answer:
Table salt: answer salt
Tea: answer acidic
Carbonated drinks: answer acidic
Baking powder: answer acid and base
Detergent: answer acid and basic
Alum: answer acidic
Explanation:
I hope this helps. Enjoy your day!
Over a long period of time the process of deposition causes the formation of
O
A. acid rain
OB. glaciers
OC. sedimentary rock
OD. Karst topography
Answer:
C. sedimentary rock
Explanation:
Deposition is basically a process in which sediments are added to land.
In water, a substance that ionizes completely in solution is called a
Answer:
please mark me brainliest
Explanation:
In water, a substance that ionizes completely in solution is called a weak electrolyte.
Answer: strong electrolyte.
Explanation: In water, a substance that ionizes completely in solution is called a. a. weak electrolyte.
Wet helium gas is placed into a balloon at 24.4 degrees Celsius and a pressure of 765.3 mm Hg. What volume (in L) does the dry gas occupy if the water vapor pressure is 24.3 torr and the mass of dried helium gas in the balloon is 0.498 g
Answer:
Hence the Volume of Gas = 3.04 L.
Explanation:
pressure of dry gas = 765.3 - 24.3 = 741 mmhg
Temperature of gas = 24.4+273.15 = 297.55 k
No of mol of gas = 0.498/4 = 0.1245 mol
R = gas constant = 0.0821 l.atm.k-1.mol-1
From ideal-gas equation
PV = nRT
(741/760) x v = 0.1245 x 0.0821 x 297.55
V = Volume of Gas = 3.04 L
What is the correct IUPAC name for Ir(NO₂)₄
Answer
Iridium(IV)Nitrite
The correct IUPAC name of the Ir(NO₂)₄ compound is Iridium(IV)Nitrite.
What is the IUPAC name?Whether it's in a continuous chain or just a ring, the largest chain of carbons joined by a single bond serves as the basis for IUPAC nomenclature.
What is a compound?
A chemical compound would seem to be a substance that contains numerous similar molecules made of atoms from different elements joined by chemical bonds.
The given compound is Ir(NO₂)₄. It can be seen that 4 nitro group is attached with Ir and its coordination number is 4. Hence, the IUPAC name will be Iridium(IV)Nitrite.
To know more about IUPAC nomenclature.
https://brainly.com/question/16631447
#SPJ2
Kevin's supervisor, Jill, has asked for an update on today's sales. Jill is pretty busy moving back and forth between different store locations. How can Kevin most effectively deliver an update to her? a) Send a detailed email Send a detailed text message Oc) Book a one-hour meeting for tomorrow morning O d) Call with a quick update
Kevin can effectively deliver an update by sending a detailed EMAIL to Jill
Email, which means electronic mail is a technological advanced way of passing information from persons to persons without physical contact. Sending emails are also official ways of passing vital information regarding business, work to and fro. According to this question, Jill is a very busy supervisor who hardly. The best way for Kevin to deliver any update concerning the store he is managing is to send Jill an updated email that can even be assessed outside work hours. Learn more: https://brainly.com/question/7098974According to an informal 1992 survey, the drinking water in about one-third of the homes in Chicago had lead levels of about 10 ppb. Dr. Koether lived in Chicago from 1996 to 1998. Assuming she drank 1.4 L of water a day, calculate the total amount of lead in mg (using one decimal place) that she was exposed to over the two years if she lived in a home that had such high levels of lead.
Answer:
10.2 mg
Explanation:
Step 1: Calculate the total amount of water she drank
1 year has 365 days and she lived in Chicago for 2 years = 2 × 365 days = 730 days.
If she drank 1.4 L of water per day, the total amount of water she drank is:
730 day × 1.4 L/day = 1022 L
Step 2: Calculate the amount of Pb in 1022 L of water
The concentration of Pb is 10 ppb (10 μg/L).
1022 L × 10 μg/L = 10220 μg
Step 3: Convert 10220 μg to milligrams
We will use the conversion factor 1 mg = 1000 μg.
10220 μg × 1 mg/1000 μg = 10.2 mg
When a chemical changes from the solid phase to the gas phase, this is an example of What chemical property?
Answer:
sublimation
Explanation:
solid => liquid Melting
liquid => solid freezing
liquid => gas evaporation
gas => liquid condensation
solid => gas sublimation
gas => solid deposition (e.g.; formation of frost), however some scholars will also refer to this process as sublimation.
HELP ASAP PLS
Reactions, products and leftovers
Answer:
See the answer below
Explanation:
From the original equation in the image, the mole ratio of C:CO2:CO is 1:1:2. This means that for every 1 mole of C and CO2, 2 moles of CO would be produced.
Now, looking at the simulation below the equation of the reaction, 3 moles of C and 8 moles of CO2 were supplied as input. Applying this to the original equation of reaction, C seems to be a limiting reagent for the reaction because the ratio of C to CO2 should 1:1.
Hence, taking all the 3 moles of C available means that only 3 moles out of the available 8 for CO2 would be needed. 3 moles c and 3 moles CO2 means that 6 moles CO would be produced (remember that the ratio remains 1:1:3 for C, CO2, and CO). This means that 5 moles CO2 would be leftover.
In other words, all the 3 moles C would be consumed, 3 out of 8 moles CO2 would be consumed, and 6 moles CO would be produced while 5 moles CO2 would be leftover.
Rewrite this measurement with a simpler unit, if possible.
4.5·m2m2m
Answer:
why are people s opinions and prejudices her greatest obstacles
What particules make up the nucleus
Answer:
nucleus is a collection of particles called protons,which are positively charged..and neutrons which are electrically neutral..electrons which are negatively charged..and neutrons are in turn made up of particles called quarks ..
Explanation:
hope this helps u ...
Answer:
The Nucleus is made up of protons and neutrons.
an endothermic reaction is one which A. reacts very fast. B. reacts very slowly. C. absorbs heat energy. D. releases heat energy.
Answer:
D. releases heat energy.
Explanation:
Explain why it is not advisable to add water to acid when
mixing them
Answer:
Consequence
you form an extremely concentrated solution of acid initially.and the solution may boil very violently, splashing concentrated acid. I hope this helped! :)Which of the following stays constant when diluting a solution?
Select the correct answer below:
A) volume
B) molarity
C) concentration
D) amount of solute
Answer:
when you're diluting a solution, you're adding in more solvent, so the solute will maintain the same (D)
20. Stoichiometry is based on
A. molecular weight.
B. temperature.
C. conservation of matter.
D. pressure.
Answer:
The correct option is (c)
Answer:
the law of conservation of mass
What functional group is found in an alcohol?
A. Ester
B. Amino
C. Carbonyl
D. Hydroxyl
Answer:
an alcohol is a Hydroxyl group due to the OH~ that is associated with it's molecules
The functional group found in an alcohol is Hydroxyl . Therefore, the correct option is option D.
What is functional group?A functional group in organic chemistry is a substituent and moiety inside a molecule that triggers the molecule's distinctive chemical processes. No matter how the rest of a molecule is made up, the very same functional group would experience the same or a similar set of chemical events.
This permits the design of synthetic chemistry as well as the methodical forecasting of chemical reactions as well as the behaviour of chemical molecules. Other functional groups close by can affect a functional group's reactivity. Retrosynthetic analysis can be used to design organic synthesis by using functional group interconversion. The functional group found in an alcohol is Hydroxyl .
Therefore, the correct option is option D.
To know more about functional group, here:
https://brainly.com/question/29263610
#SPJ7
Which molecule is butane?
Answer:
option c see image... and yw
The molecule shown in option C is butane.
What is butane?The organic compound with four carbon atoms and ten hydrogen atom lie in linear chain without any functional group is called butane.It is belongs to alkane family.What is alkane?It is acyclic saturated hydrocarbons organic compounds.It is also known as paraffin.An alkanes contain carbon atoms and hydrogen atoms bonded with single bond.It general formula is [tex]C_{n} H_{n+2}[/tex] .To learn more about butane,
https://brainly.com/question/14818671
#SPJ2
How do the particles in plasmas compare with
the particles in solids?
O Plasmas and solids are both made up of cation-anion pairs.
• Solids and plasmas are both made up of electrons and cations.
Solids are made up of cation-anion pairs, but plasmas are not.
O Plasmas are made up of cation-anion pairs, but solids are not.
Answer:
Solids are made up of cation-anion pairs, but plasmas are not
Explanation:
Solid is made from cautions and anions while the plasma is not and hence both are made from the cautions and anion plasma. Solids and plasma is made from electrons and solids are made from caution and anion pairs. Plasma is a good conductor of electricity as they have a lot of mobile charged particles.A sample of gas occupies 10.0 L at 240°C under a pressure of
80.0 kPa. At what temperature would the gas occupy 20.0 L if
we increased the pressure to 107 kPa?
Answer: 1090°C
Explanation: According to combined gas laws
(P1 × V1) ÷ T1 = (P2 × V2) ÷ T2
where P1 = initial pressure of gas = 80.0 kPa
V1 = initial volume of gas = 10.0 L
T1 = initial temperature of gas = 240 °C = (240 + 273) K = 513 K
P2 = final pressure of gas = 107 kPa
V2 = final volume of gas = 20.0 L
T2 = final temperature of gas
Substituting the values,
(80.0 kPa × 10.0 L) ÷ (513 K) = (107 kPa × 20.0 L) ÷ T2
T2 = 513 K × (107 kPa ÷80.0 kPa) × (20.0 L ÷ 10.0 L)
T2 = 513 K × (1.3375) × (2)
T2 = 1372.275 K
T2 = (1372.275 - 273) °C
T2 = 1099 °C
1090 degree Celsius
hope it helps
