CAN SOMEBODY HELP ME WITH THIS QUESTION PLEASE !! ?

Answer:

erosion.

Explanation:

Answer:

2 atm

Explanation:

The symbol 'atm' is used for pressure. Hence, the symbol used to indicate the pressure at which a chemical reaction is carried out can be, 2 atm.

Answer:

When you heat up water, the water molecules start moving around faster and faster. ... So hot water is less dense than cold water. When you put the two together with the hot water on the bottom, the hot water rises to the top, mixing with the cold water along the way and creating purple water.

Explanation:

have a great day :)

Answer:

Not affected.

Explanation:

Kinetic energy of the dominoes not affected if the first domino did not hit the second one because no kinetic energy is lost due to no collision. If the first domino hit the second one, its kinetic energy decreases and changes in other form of energy such as heat and sound energy etc. But when there is no collision occur, then there is no change in the kinetic energy of dominoes.

Answer:

the effects that the scientists are causing by manipulating varuables

The question is incomplete, the complete question is;

The compound magnesium nitrate is a strong electrolyte. Write the reaction when magnesium nitrate is put into water:

Answer:

Mg(NO3)2(s)--------->Mg^2+(aq) + 2NO3^-(aq)

Explanation:

When we say that a compound is a strong electrolyte, we mean that that the compound dissociates completely in solution to form its ions.

This means that all strong electrolytes attain 100% dissociation of the solid in water according to its stoichiometric equation.

For magnesium nitrate, the reaction equation is;

Mg(NO3)2(s)--------->Mg^2+(aq) + 2NO3^-(aq)

Answer:

1.204428 * 10^24 atoms

Explanation:

Number of moles = 2 mol

Number of atoms = ?

The relationship between moles and atoms is given by the avogadro's umber. This is the number of units in one mole of a substance.  The units can be atoms, ions etc In this case it is atoms. The number is equal to  6.02214076 * 10^23

This means;

1 mol = 6.02214076 * 10^23

2 mol = x

Upon solving for x,

x = 2 * 6.02214076 * 10^23

x = 12.04428 * 10^23

x = 1.204428 * 10^24 atoms

Answer:

I think you should use distillation cauze it helps to separate two mixtures

Answer:

A.) distillation

Explanation:

edge 2021

0.042 moles of Hydrogen evolved

Given

I = 1.5 A

t = 1.5 hr = 5400 s

Required

Number of Hydrogen evolved

Solution

Electrolysis of water ⇒ decomposition reaction of water into Oxygen and Hydrogen gas.

Cathode(reduction-negative pole) : 2H₂O(l)+2e⁻ ⇒ H₂(g)+2OH⁻(aq)

Anode(oxidation-positive pole) : 2H₂O(l)⇒O₂(g)+4H⁻(aq)+4e⁻

Total reaction : 2H₂O(l)⇒2H₂(g)+O₂(g)

So at the cathode H₂ gas is produced

Faraday : 1 mole of electrons (e⁻) contains a charge of 96,500 C

[tex]\tt mol~e^-=\dfrac{Q}{96500}[/tex]

Q = i.t

Q = 1.5 x 5400

Q = 8100 C

mol e⁻ = 8100 : 96500 = 0.084

From equation at cathode , mol ratio e⁻ : H₂ = 2 : 1, so mol H₂ = 0.042

The question is incomplete, the complete reaction equation is;

The concentration of a hydrogen peroxide solution can be determined by titration

with acidified potassium manganate(VII) solution. In this reaction the hydrogen

peroxide is oxidised to oxygen gas.

A 5.00 cm3 sample of the hydrogen peroxide solution was added to a volumetric flask

and made up to 250 cm3 of aqueous solution. A 25.0 cm3 sample of this diluted

solution was acidified and reacted completely with 24.35 cm3 of 0.0187 mol dm–3

potassium manganate(VII) solution.

Write an equation for the reaction between acidified potassium manganate(VII)

solution and hydrogen peroxide.

Use this equation and the results given to calculate a value for the concentration,

in mol dm–3, of the original hydrogen peroxide solution.

(If you have been unable to write an equation for this reaction you may assume that

3 mol of KMnO4 react with 7 mol of H2O2. This is not the correct reacting ratio.)

Answer:

2.275 M

Explanation:

The equation of the reaction is;

2 MnO4^-(aq) + 16 H^+(aq) + 5H2O2(aq) -------> 2Mn^+(aq) + 10H^+ (aq) + 8H2O(l)

Let;

CA= concentration of MnO4^- =  0.0187 mol dm–3

CB = concentration of H2O2 = ?

VA = volume of MnO4^- = 24.35 cm3

VB = volume of H2O2 = 25.0 cm3

NA = number of moles of  MnO4^- = 2

NB = number of moles of H2O2 = 5

From;

CAVA/CBVB = NA/NB

CAVANB = CBVBNA

CB = CAVANB/VBNA

CB = 0.0187 * 24.35 * 5/25.0 * 2

CB = 0.0455 M

Since  

C1V1 = C2V2

C1 = initial concentration of H2O2 solution = ?

V1 = initial volume of H2O2 solution =  5.0 cm3

C2 = final concentration of H2O2 solution= 0.0455 M

V2 = final volume of H2O2 solution = 250 cm3

C1 = C2V2/V1

C1 = 0.0455 * 250/5

C1 = 2.275 M

Answer:

create a plan

the ways of of a student to set a goal

1. Write clear and measurable goals

2.Create a specific plan for each goal

3.Read your goals daily and visualize yourself accomplishing them

4. Reflect yourself to see if you are on target

5. Revise your action plans if needed.

1.)make a plan

2.)make a schedule

5.)pace him or herself

Answer:

1.807×10and at the top of ten put -24

Answer:

The correct answer is - 29.45 / 100 x 25.6 = 7.5392 grams

Explanation:

It is given in the question that in 100 gms of CaSO4 there are 29.45 grams of Ca present and there is 25.6 gram of total CaSO4 sample present, So, to calculate the exact value of calcium in this given sample is:

mass of Ca = total amount of sample*percentage of calcium in sample /100

M of Ca =25.6*29.45/100

M of Ca = 7.5392 grams

Thus, the correct procedure is given by 29.45 / 100 x 25.6 = 7.5392 grams

Answer:

[tex]h=12.9cm[/tex]

Explanation:

Hello!

In this case, since we can consider the beaker until the 100-mL mark as a cylinder, we can use the following equation to relate its diameter, vertical distance or height and volume:

[tex]V=\pi h\frac{d^2}{4}[/tex]

Thus, since we know the diameter, volume (which is equivalent to 600 cm³) and π, we can plug in to obtain:

[tex]600cm^3=\pi *h*\frac{(77.0mm)^2}{4}[/tex]

It means it is necessary to take the mm to cm and solve for h:

[tex]h=\frac{600cm^3}{\pi*\frac{(7.70cm)^2}{4}} \\\\h=12.9cm[/tex]

Best regards!

The distance between each 100 mL mark is 2.15 cm.

The volume of a cylinder is obtained using the formula;

V = πr^2h

Now, we have the following information;

Volume of the cylinder = 600. mL or 600 cm^3

Diameter of the cylinder = 77 mm or 7.7 cm

Radius of the cylinder = 7.7/2 = 3.85 cm

Height of the cylinder  = h

Hence;

600 = 3.142 × ( 3.85 )^2 × h

h = 600/3.142 × ( 3.85 )^2

h = 12.88 cm

There are six 100 mL marks on the beaker, the distance between each 100 mL mark =  12.88 cm/6 = 2.15 cm

Learn more about volume: https://brainly.com/question/12748872

Why can gases and liquids be paired but not solids?

The atoms and molecules in gases are much more spread out than in solids or liquids. They vibrate and move freely at high speeds. A gas will fill any container, but if the container is not sealed, the gas will escape. Gas can be compressed much more easily than a liquid or solid.

Answer:

D

Explanation:

Answer:

C they have different frames of reference

Explanation:

Answer: The empirical formula of X  is [tex]Cr_2O_3[/tex]

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given.

Mass of Cr = 68.4 g

Mass of O = 31.5 g

Step 1 : convert given masses into moles.

Moles of Cr =[tex]\frac{\text{ given mass of Cr}}{\text{ molar mass of Cr}}= \frac{68.4g}{52g/mole}=1.31moles[/tex]

Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{31.5g}{16g/mole}=1.97moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For Cr = [tex]\frac{1.31}{1.31}=1[/tex]

For O = [tex]\frac{1.97}{1.31}=1.5[/tex]

The simple whole number ratio of Cr : O= 2: 3

Hence the empirical formula is [tex]Cr_2O_3[/tex]

Answer:

Name

Sulfur

Atomic Mass

32.066 atomic mass units

Number of Protons

16

Number of Neutrons

16

Number of Electrons

16

Explanation:

Answer:

Explanation:

16 protons

16 electrons

16 neutrons

Answer:

plants

Explanation:

because it produces ( i am a third grade student and don't know if it is right or not)

Answer:

A precipitation is answer

Answer:

All ions must a overall charge

Explanation:

Answer:

i belive its B

Explanation:

Answer:

Converting Grams to Moles of an Element and Vice Versa.

We can convert back and forth between grams of an element and moles.

The conversion factor for this is the molar mass of the substance. The molar mass is the ratio giving the number of grams for each one mole of the substance

molar mass is the factor

Grams can be converted to moles and vice versa so the conversion factor which is used for this is molar mass.

Mass of any substance will be converted into moles by using the below equation:

n = W/M, where

n = moles

W = given mass

M = molar mass

By using the above formula we can convert the mass of any object to moles and moles to mass.

Hence conversion factor which is used for this is molar mass(M).

To know more about mass & moles, visit the below link:

https://brainly.com/question/24639749

#SPJ2

Answer:

B. Indicator

Explanation:

An indicator is used to determine whether an acid or alkali has been added to a solution.

An acid or alkali changes the hydrogen ion concentration in solution. This is indicated by the pH of the solution after which the acid or alkali has been added.

Answer:

D. liquid

Explanation:

Matter, which is any substance that has weight and occupies space, can exists in three states namely: solid, liquid and gaseous. In this question, water is being described as matter.

According to this question, a sample of water of volume 2litres is shaped like a cylinder in one container and shaped like a rectangle in another larger container. Based on this observation, the water sample is in a LIQUID STATE because a liquid has no indefinite shape but takes the shape of its container.

Hence, this water sample, takes the shape of its cylindrical container in the first scenario and shape of its rectangular container in the second scenario.

Answer:

Sweets are sold loose, or pre-packed in 120g bags.

The 120 g bags are £1.49 each.

The loose sweets are £0.89 for 100g.

By calculating the price per gram, determine which is better value. Show your working.

Answer: a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.

Explanation: definition

Answer:

Energy produced deep inside Earth heats rock in the mantle. ... As it becomes less dense, the heated rock rises toward Earth's surface. The cooler, denser rock surrounding the heated rock sinks, as Figure 5 shows. In this way, heat inside Earth moves toward the cooler crust.

Explanation:

do you like my og name

Energy from Earth’s interior affect surface changes due to:

Learn more:

brainly.com/question/25543134

Answer:

1. nitrous oxide

2. copper sulfide

3. cl2o7

4. MgBr2

Explanation:

hope it helps

The equations that show a precipitation reaction would be [tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex], [tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex], and [tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex]

It is a reaction in which two soluble salts react in aqueous solutions to form one soluble and one insoluble salt.

Thus, all the equations with an insoluble salt as one of the products will qualify as precipitation reactions. The insoluble is designated as (s).

Hence, the following are precipitation reactions:

More on precipitation reactions can be found here: https://brainly.com/question/24158764

#SPJ2