Consider a venturi with a throat-to-inlet area ratio of 0.75, mounted on the side of an airplane fuselage. The airplane is in flight at standard sea level. If the static pressure at the throat is 2050 lb/ft2 , calculate the velocity of the airplane.

This question is incomplete, the complete question is;

To convert from the U.S. Customary (FPS) system of units to the SI system of units. A first-year engineering student records three separate measurements as 653 lb, 69.0 mi/h, and 293 × 10⁶ ft². Suppose this engineering student has to turn in the results, but the professor only accepts results given in SI units.  

Required:

What is the area measurement, 293 × 10⁶ ft², in SI units?

293 × 10⁶ ft² = ?km²

Answer:

the area measurement is  27.221 km²

Explanation:

Given the data in the question;

What is the area measurement, 293 × 10⁶ ft², in SI units

we are to the result of the measured area from ft² to km²

we know that;

1 meter = 3.2808 ft

1 km = 1000 m

1 ft = (1 / 3.2808)m

1 m = ( 1/1000 ) km

since our measured are is 293 × 10⁶ ft²

hence

A = 293 × 10⁶ × [ (1 / 3.2808)m ]²

A = 27221252.74 m²

A = 27221252.74 × [ ( 1/1000 ) km ]²

A = 27.221 km²

Therefore, the area measurement is  27.221 km²

Answer:

60000 H

Explanation:

We are given;

Number of turns; N = 3000 turns

Change in flux = 900 - 860 = 40 Wb

Change in current = 9 - 7 = 2 A

Now, the formula for incremental inductance is given as:

L = N(Change in flux/Change in current) where;

N is Number of turns

Plugging in the relevant values, we have;

L = 3000(40/2)

L = 60000 H.

Answer: True

Explanation:

The statement that "a masonry chimney should be braced with horizontal metal straps every few feet against the structure and into reinforced points such as wall studs to stabilize the chimney from the shaking force of an earthquake" is true.

In a scenario whereby the chimney isn't braced with the horizontal metal straps every few feet, this can lead to its collapse in case of an earthquake. Therefore, the correct option is "true".

Answer:

soil>>Slop sink

>Urinal

>water closet

Answer:

For small temperature difference between a body and its surrounding, the rate of cooling of the body is directly proportional to the temperature difference and the surface area exposed. qf = final temperature of object

Explanation:

hope this helps you sorry if it doesn’t help you

Answer:

Calcium Chloride

Brine Wash

Drierite

Explanation:

Removal of small amounts of water from a polar solvent is Calcium Chloride

Removal of visible pockets of water from an organic solvent is Brine Wash

Storage of solvents or other materials in a desiccator is Drierite

Answer:

bood ekogcd gcaerh is an American fbnuxc

Answer:

From what year did 3.5G enter Vietnam?

Explanation:

Vietnam does not have 3.5G network. MobiFone's first trial with 3.5G technology on this band was able to cover the whole waters of Vung Tau and Con Dao in August 2014.

Answer:

Answer to the following is as follows;

Explanation:

A request for proposal is a documentation that invites prospective contractors to submit business opportunities to an agency or corporation interested in procuring a commodities, product, or valuable resource through a bid procedure.

A request for proposal (RFP) is a commercial document that introduces a project, defines it, and invites eligible contractors to compete on its completion.

Answer:

 0.287

Explanation:

Design-stage uncertainty can be expressed as :

Ud = √ Uo^2 + Uc^2 ------ ( 1 )

where : Uo = 1/2( resolution value ) = 1/2 * 0.01 V = 0.005 V

Uc = √(0.10)^2 + (0.10)^2 + (0.15)^2 + (0.20)^2  = 0.287

back to equation 1

Ud = √ ( 0.005)^2 + ( 0.287 )^2 =  0.287

Answer:

0.287

Explanation:

Answer: hello some data related to your question is missing attached below is the missing data

answer:

T2 = 265°C

Explanation:

First step : calculate sum of vertical forces

∑ y = 0

Fmg - 2(0.5 Fst ) = 0

∴Fmg = ( 12 * 10^6 ) ( 2 * π/4 (0.01)^2 )

          = 1884.96 N

Also determine the Compatibility equation in order to determine the change in Temperature

ΔT = 250°C

therefore Temperature at which average normal stress becomes 12.0 MPa

ΔT = T2 - T1

250°C = T2 - 15°C

T2 = 250 + 15 = 265°C

attached below is the detailed solution

Answer:

Time required = 287.2 secs  

Explanation:

Volume  of room = 25 * 10 * 4 = 1000 m^3

power consumed by pump = 15 kW

T1 ( initial temperature ) = 12°C

P1 ( Initial pressure ) = 1 bar

COPhp = 3

Calculate time taken to raise room Temp to 27°C

average heat supplied ( ∅ ) = COPhp * power consumed by pump

                                             = 3 * 15 = 45 kW

Time required can be calculated using the relation below

∅t = P*V*Cv ( T2 - T1 )   [ p = 1.2 kg/m^3 , Cv = 0.718 KJ/kg ( air properties ) ]

45 * 10^3 ( t )  = 1.2*1000* 718 ( 27 - 12 )

∴ solving for t

t = 287.2 secs  ≈ 4.79 mins

Answer:

Following are the program to the given question:

def calculate_storage(filesize):#definging a method calculate_storage that takes filesize as a parameter  

 block_size = 4096#definging block_size that holds value

 full_blocks = filesize//block_size#definging full_blocks that divides the value and hold integer part

 partial_block_remainder = filesize%block_size#definging partial_block_remainder that holds remainder value

 if partial_block_remainder > 0:#definging if that compare the value

   return block_size*full_blocks+block_size#return value

 return block_size*full_blocks#return value

print(calculate_storage(1))    # calling method by passing value

print(calculate_storage(4096)) # calling method by passing value

print(calculate_storage(4097)) # calling method by passing value

Output:

4096

4096

8192

Explanation:

In this code, a method "calculate_storage" is declared that holds a value "filesize" in its parameters, inside the method "block_size" is declared that holds an integer value, and defines "full_blocks and partial_block_remainder" variable that holds the quotient and remainder value and use it to check its value and return its calculated value. Outside the method, three print method is declared that calls the method and prints its return value.

Answer:

a. True

b. False

Explanation:

a. Since true stress, σ' = σ(1 + ε) where σ = engineering stress and ε = engineering strain.

Also under tension ε > 0, so, (1 + ε) > 1

Since (1 + ε) = σ'/σ > 1, ⇒ σ' > σ

So, the true stress is greater than the engineering stress.

So, the statement is true

b. Creep is a time-dependent deformation under certain applied load.

Creep occurs at high temperatures under different types of stress.

But, Creep test is carried out at constant high temperature and constant stress.

This statement is false.

Answer:

13.86 MPa

Explanation:

We need to find the change in length ΔL of the steel beam and thus, the strain in the beam, ε.

ΔL = L₀αΔθ

Strain, ε = ΔL/L₀ = αΔθ where α = coefficient of linear expansion of steel = 11 × 10⁻⁶ °C and Δθ = temperature change of steel beam = θ₂ - θ₁ where θ₁ = initial temperature of steel beam = 23 °C and θ₂ = final temperature of steel beam = 42 °C

Substituting the values of the variables into the equation, we have

ε = αΔθ

ε = α(θ₂ - θ₁)

ε = 11 × 10⁻⁶ /°C(42 °C  - 23 °C )

ε = 11 × 10⁻⁶ /°C(42 °C)

ε = 462 × 10⁻⁶

ε = 4.62 × 10⁻⁴

Now, the Young's modulus of concrete is Y = 30 GPa = 30 × 10⁹ N/m²

Y = σ/ε where σ = compressional stress from concrete and ε = strain on steel

So, σ = Yε

σ = 30 × 10⁹ N/m² × 4.62 × 10⁻⁴

σ = 138.6 × 10⁵ N/m²

σ = 1.386 × 10² × 10⁵ N/m²

σ = 1.386 × 10⁷ N/m²

σ = 13.86 × 10⁶ N/m²

σ = 13.86 MPa

Answer:

a) Zero

b) the rate of entropy generation in the system's universe = ds/dt = 0.2603 KW/K

Explanation:

a) In steady state  

Net rate of Heat transfer = net rate of heat gain -  net rate of heat lost  

Hence, the rate of heat transfer = 0

b) In steady state, entropy generated  

ds/dt = - [ Qgain/Th1 + Qgain/Th2 - Qlost/300 K]

Substituting the given values, we get –  

ds/dt = -[5/1500 + 3/1000 – (5+3)/300]

ds/dt = - [0.0033 + 0.003 -0.2666]

ds/dt = 0.2603 KW/K

Answer:

Video game designers typically have a bachelor's degree in game design, computer engineering, or computer science which takes four to five years to complete. Courses in a game design degree program may include project management, integrated video design and technology, game prototyping and level design.

Answer:

In the clevis shown in Fig. 1-11b, find the minimum bolt diameter and the minimum thickness of each yoke that will support a load P = 14 kips without exceeding a shearing stress of 12 ksi and a bearing stress of 20 ksi.

127-clevis-double-shear-bolt.gif

Solution 127

Hide Click here to show or hide the solution

127-fbd-clevis-double-shear-bolt.gifFor shearing of rivets (double shear)

P=τA

14=12[2(14πd2)]

d=0.8618in → diameter of bolt answer

For bearing of yoke:

P=σbAb

14=20[2(0.8618t)]

t=0.4061in → thickness of yoke answer

Answer:

The AGC circuit operates with an input voltage range of 60 dB (5 mV p-p to 5 V p-p), with a fixed output voltage of 250 mV p-p.

Explanation:

Answer:

Here is the code.

Explanation:

#include<stdio.h>

int main()

{

int i, time_worked, over_time, overtime_pay = 0;

for (i = 1; i <= 10; i++)

{

 printf("\nEnter the time employee worked in hr ");

 scanf("%d", &time_worked);

 if (time_worked>40)

 {

  over_time = time_worked - 40;

  overtime_pay = overtime_pay + (12 * over_time);

 }

}

printf("\nTotal Overtime Pay Of 10 Employees Is %d", overtime_pay);

return 0;

}

Output :

Enter the time employee worked in hr 42

Enter the time employee worked in hr 45

Enter the time employee worked in hr 42

Enter the time employee worked in hr 41

Enter the time employee worked in hr 50

Enter the time employee worked in hr 51

Enter the time employee worked in hr 52

Enter the time employee worked in hr 53

Enter the time employee worked in hr 54

Enter the time employee worked in hr 55

Total Overtime Pay Of 10 Employees Is 1020.

Answer:

8.4627 m

Explanation:

Transmissivity( T ) = 300 m^2/day

Storativity( S )  = 0.0005

well radius ( r ) = 0.3m

Determine the drawdown in well at 100 days

Drawdown at 100 days = ∑ Drawdown at various period

We will use the equation : S = Q / U*π*T [ -0.5772 - In U ]  ----- ( 1 )

where : Q = discharge , T = transmissivity

             S = drawdown ,

U = r^2*s / 4*T*t  --- ( 2 )

r = well radius , S = Storativity, t = time period

i) During 0-20

U1 = r^2*s / u*π*t  = 1.875 * 10^-9

Input values into equation 1

S1 = 2.5885

ii) During 20-50

U2 = r^2*s / 4*π*t = 0.3^2 * 30 / u * 300 * 30 = 1.25 * 10^-9

input values into equation 1

S2 = 1.5854 m

iii) During 50 -90

U3 = r^2*s / 4*π*t = 9.375 * 10^-10

input values into equation 1

S3 = 4.2888 m

iv) During 90-100

U4 = 0

s4 = 0

Drawdown at 100 days = ∑ Drawdowns at various period

                                       = s1 + s2 + s3 + s4 = 2.5885 + 1.5854 + 4.2888 + 0

                                       = 8.4627 m

Answer:

Explanation:

From the information given:

The instantaneous expression of the electric field in the wave is:

[tex]E(r,t)= (i_x \sqrt{3} -i_z) 2 \ sin (2 \pi*10^8t + 2 \pi x/3+2 \pi z /\sqrt{3} + 30 ^0) , \ V/m[/tex]

To determine the unit vector in line with the wave electric field, we take the first term in E(r,t) for [tex]I_E^\to[/tex] as:

[tex]I_E^\to = i_x \sqrt{3}-i_z \\ \\ I_E^\to = \dfrac{i_x \sqrt{3}-i_z}{\sqrt{3 +1}} \\ \\ \mathbf{ I_E = \dfrac{i_x\sqrt{3} -i_z}{2}}[/tex]

The amplitude is denoted by the numerical value after the first term, which is:

[tex]\mathbf{E_o = 2}[/tex]

The wavelength can be determined by using the expression:

[tex]\beta =\dfrac{2 \pi}{\lambda }[/tex]

from the given instantaneous expression:

[tex]\beta = \dfrac{2 \pi}{3}x+\dfrac{2 \pi}{\sqrt{3}}z[/tex]

[tex]\beta = \sqrt{\dfrac{2 \pi}{(3)^2}+\dfrac{(2 \pi}{(\sqrt{3})^2}}[/tex]

[tex]\beta = \sqrt{\dfrac{2 \pi}{9}+\dfrac{2 \pi}{{3}}}[/tex]

Factorizing 2π

[tex]\beta =2 \pi \sqrt{\dfrac{1}{9}+\dfrac{1}{{3}}}[/tex]

[tex]\beta =2 \pi \sqrt{\dfrac{9+3}{9*3}}}[/tex]

[tex]\beta =2 \pi \sqrt{\dfrac{12}{27}}}[/tex]

[tex]\beta =2 \pi \sqrt{\dfrac{4*3}{9*3}}}[/tex]

[tex]\beta =2 \pi \sqrt{\dfrac{4}{9}}}[/tex]

[tex]\beta =2 \pi\times {\dfrac{2}{3}}}[/tex]

recall from the expression using in calculating wavelength:

[tex]\beta =\dfrac{2 \pi}{\lambda }[/tex]

∴

equating both together, we have:

[tex]\dfrac{2 \pi}{\lambda }= 2 \pi\times {\dfrac{2}{3}}}[/tex]

[tex]\lambda = \dfrac{3}{2}[/tex]

λ = 1.5 m

In line with the wave direction; unit vector [tex]i_k[/tex] can be computed as follows:

[tex]i_k = - [ \beta_1x +\beta_2z]/\beta[/tex]

where;

[tex]\beta_1 = \dfrac{2 \pi }{3} \ ; \ \beta_2 = \dfrac{2 \pi }{\sqrt{3}} \ ; \ \beta = \dfrac{2 \pi \times 2}{3} ;[/tex]

∴

[tex]i_k = - \Big[\dfrac{2 \pi}{3}x + \dfrac{2 \pi}{\sqrt{3}} z\Big]\times \dfrac{1}{\dfrac{2 \pi *2}{3}}[/tex]

[tex]i_k = - \Big[\dfrac{x}{2} + \sqrt\dfrac{{3}}{4}} z\Big][/tex]

[tex]i_k = - \Big[\dfrac{1}{2}x + \sqrt{\dfrac{3}{4} }z\Big][/tex]

[tex]\mathbf{i_k = - \Big[0.5x +0.86 z\Big]}[/tex]

Answer:

is there a picture of the figure?

Answer:

The answer is below

Explanation:

a) The work done is equal to the loss in kinetic energy (KE)

Change in kinetic energy (ΔKE) = Final kinetic energy - initial kinetic energy

Final KE = [tex]\frac{1}{2}mv_f^2[/tex]

But the final velocity is 0 (at rest). Hence:

Final KE = [tex]\frac{1}{2}mv_f^2=\frac{1}{2}m(0)^2=0[/tex]

ΔKE = 0 - K = -K

W = ΔKE = -K

Also, the work done (W) = charge (q) * distance (d) * electric field intensity (E)

W = qEd

but q = -e, hence:

W = -e * E * d

Using:

W = ΔKE

-e * E * d = -K

E= K / (e * d)

b) The electric field is in the direction of the electrons motion

Answer:

Minimum city gas mileage is 15

Explanation:

Minimum city gas mileage among 13 different car sizes in 2008 is 15.

Answer:

here you go.

screenshot 2 should give you some basic idea

Answer:

90

Explanation:

mean is basically taking the sum of all numbers and then dividing the sum with the number of all given numbers..

here, the mean is 9, total numbers are 10.. so the sum will be 9 multiplied by 10, that is 90.

If the mean of 10 numbers is 9, then the sum (total) of these numbers will be​ 90. The correct option is D.

The mean is the average of a set of variables in mathematics and statistics. The mean can be calculated in a variety of ways, including the simple arithmetic mean (add the numbers and divide the total by the number of observations), geometric mean, and harmonic mean. Mean is denoted by a small m.

To calculate mean: Arrange the data items in ascending order from least to greatest. If the number of points is odd, the median is the data point in the middle of the list. If the number of data points in the list is even, the median is the average of two middle data points.

Mean = total sum of the numbers/total numbers

9 = total sum of the numbers / 10

The sum of the terms = 9 x 10 = 90

90 = total sum of the numbers

Therefore, the correct option is D. 90

To learn more about the mean, refer to the link:

https://brainly.com/question/28670966

#SPJ2

The question is incomplete. Your most probably complete question is given below:

A. 9. B. 0.9. C. 70. D. 90