If 8 moles of FeS2 react with 15 moles of O2, the limiting reactant is O2.
WHAT IS LIMITING REACTANT:A limiting reactant is reactant that is totally consumed when the chemical reaction is completed.According to this question, the following reaction was given: 4FeS2 + 11O2 → 2Fe2O3 + 8SO2.4 moles of FeS₂ reacts with 11 moles of O₂
This means, 8 moles of FeS₂ will react with (8 × 11/2) = 22 moles of O₂15 moles of O₂ is available. In comparison with 22 moles, O₂ is in short supply .
Therefore, If 8 moles of FeS2 react with 15 moles of O2, O₂ is the limiting reagent.
Learn more about limiting reactant at: https://brainly.com/question/14225536
Answer:
They are right it's O2
Explanation:
I accidently rated it low but it's 100% right
What type of molecule is shown below?
A. Ether
B. Alcohol
C. Aldehyde
D. Ketone
The given molecule is an aldehyde with the formula HCHO. It is the simplest and primary aldehyde . Hence, option c is correct.
What are aldehydes ?Aldehydes are a class of organic compounds that contain a carbonyl group (a carbon double-bonded to an oxygen) at the end of a carbon chain. The general formula for an aldehyde is RCHO, where R is a substituent or side chain attached to the carbonyl group.
Aldehydes are often characterized by their distinctive odor, which can be described as pungent and irritating. Some common aldehydes include formaldehyde (used in building materials and as a disinfectant), acetaldehyde (found in alcoholic beverages), and benzaldehyde (used in food flavorings).
Aldehydes are important intermediates in many chemical reactions, and they are used in a variety of industrial and laboratory applications. They can be synthesized by the oxidation of primary alcohols or by the partial oxidation of hydrocarbons. The given compound is formaldehyde HCHO.
Find more on aldehydes:
https://brainly.com/question/30902678
#SPJ7
A certain element has two naturally occurring isotopes. The atomic mass of isotope 1 (35.4723 % natural abundance) is 184.9529 amu. Determine the atomic mass of isotope 2. The average atomic mass of the element is 186.2071 amu. Do not include units; report answer to 4 decimal places.
Answer:
the value
Explanation:
Select the statement that is most correct regarding chemical bonds. A. multiple bonds between two atoms are not possible with covalent bonding B. hydrogen bonds are very weak and can only occur when polar covalent bonds are present C. Ionic bonds involve the sharing of electrons D. Covalent bonds involve the transfer of one or more electrons from one atom to another
Answer:
hydrogen bonds are very weak and can only occur when polar covalent bonds are present
Explanation:
Hydrogen bonds are weak intermolecular interactions that occur when hydrogen is covalently bonded to a highly electronegative atom.
Owing to the difference in electro negativity between hydrogen and the highly electronegative atom, the bond is a polar covalent bond.
This hydrogen bond is a weak bond but accounts for properties such as high melting and boiling points of small molecules such as water and ammonia.
A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance.
A man pushes a wheelbarrow.
Which simple machines make up a wheelbarrow?
a pulley and an inclined plane
a wheel and axle and a lever
a pulley and a wheel and axle
a lever and a wedge
Answer: it consists of two simple machines: a lever and a wheel and axle. Effort is applied to the lever by picking up the handles of the wheelbarrow.
Explanation:
Answer:
B
Explanation:
B)
Calculate the molarity of the following solution: 1.0 mole of KCl in .75 L of solution.
1.3 M
2.0 M
0.750 M
99 M
Answer:
1.3 M
Explanation:
1 mole= Concentration * Volume
1 mole=C*0.75 L
C=1.3 M
[tex]what \: is \: acid \: \: \: {?} [/tex]
meaning:An acid is a chemical substance, usually a liquid, which contains hydrogen and can react with other substances to form salts. Some acids burn or dissolve other substances that they come into contact with.
Answer:
Hope it help you#CarryOnLearningThe compounds that form from the bonding of the hydroxyl group (-OH) to a hydrocarbon are called the aldehydes.
True
False
Answer:
False.
I just got it right, lol.
plzzz answer fastttttttt
I will give brainliest
Answer:
starch or carbs - amylase
fat - lipase
protien - pepsim
Question
Calculate the total energy, in kilojoules, that is needed to turn a 35 g block
of ice at -10 degrees C into water vapor at 100 degrees C.
Answer:
34545 J
Explanation:
Applying,
E = mc'+cm(t₂-t₁)+Cm(t₂-t₀).............. Equation 1
Where E = Total energy, m = mass of the ice, c' = latent heat of ice, c = specific heat capacity of ice, t₂ = final temperature, t₁ = initial temperature, C = specific heat capacity of water, t₀ = temperature of ice at 0°C
From the question,
Given: m = 35 g = 0.035 kg, t₁ = -10°C, t₂ = 100°C, t₀ = 0°C
Constant: C = 4200 J/kg.K, c = 2100 J/kg.K, c' = 336000 J/kg
Susbtitute these values into equation 1
E = [336000(0.035)]+[0.035×2100(100+10)]+[4200×0.035(100-0)]
E = 11760+8085+14700
E = 34545 J
HELPPPP pleaseeeeee!!!!
Answer:
Length=Meter
Mass=Kilogram
Time=Second
Explanation:
Si is the International System of Units and means not just the U.S metric system.
Hope this helps and Please mark as Brainliest
Write the electron configuration for Gold (Au). You may choose to write it in the long form or in the noble gas configuration form (shortcut).
Answer:
1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s¹4f¹⁴5d¹⁰
Explanation:
AYUDA XFAVOR, NO LE ENTIENDO MUY BIEN:(
Answer:
A. total aumenta
Explanation:
8g + 4.04g = 12.04g
How many silicons atoms are there in 0.0356 moles of silicon
Answer:
2.14 × 10²² atoms Si
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesStoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
Identify
[Given] 0.0356 mol Si
[Solve] atoms Si
Step 2: Identify Conversions
Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.
Step 3: Convert
[DA] Set up: [tex]\dipslaystyle 0.0356 \ mol \ Si(\frac{6.022 \cdot 10^{23} \ atoms \ Si}{1 \ mol \ Si})[/tex][DA] Multiply [Cancel out units]: [tex]\dipslaystyle 2.14383 \cdot 10^{22} \ atoms \ Si[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
2.14383 × 10²² atoms Si ≈ 2.14 × 10²² atoms Si
Which of the following is a correct statement about water?
A)Hydrogen bonding causes water to be strongly cohesive.
B)Hydrogen bonding causes water to have a low surface tension.
C)Water is a universal solvent because polar and nonpolar solutes can dissolve in it.
D) Water is less dense as a liquid than as a solid because of changes in bond structure.
Answer:
D) Water is less dense as a liquid than as a solid because of changes in bond structure.
Explanation:
I hope I was able to help!
Have a nice day :)
The correct statements about water is that hydrogen bonding causes water to be strongly cohesive and is less dense as a liquid and solid.
What is hydrogen bonding?It is bonding in between the hydrogen atom and most electronegative atoms like flourine, chlorine, oxygen atoms, etc.
In water molecule hydrogen bonding is present in the form of intermolecular as well as intramolecular force and makes it more cohesive to get attracted towards each other.Water molecule has a high surface tension, as a result of which it is able to form a drop of water.Water is not a universal solvent, else it is a polar solvent and able to dissolve only polar molecules.It is also true that water is less dense as a liquid than as a solid because of changes in bond structure.Hence water is less dense as a liquid than as a solid because of changes in bond structure and hydrogen bonding causes water to be strongly cohesive.
To know more about water, visit the below link:
https://brainly.com/question/18681949
Can someone please help me!!
Answer:
Explanation:
Hope this helps u!!
The part of an atom that has an overall positive charge is called
A)
an electron
B)
the nucleus
C)
the first shell
D)
the valence shell
Answer: I think it’s B
2. When we lift a stool, its ____________
A) gravitational potential energy is increased
B) gravitational potential energy is decreased
C) kinetic energy is decreased
D) gravitational potential energy remains unchanged
A.)
Standing on an elevated ledge would be more potential energy than standing on the ground. Same applies for anything else -- Including a chair!
Calculate the pressure kPa of 0.421 mole of helium gas at 254 degree celsius when it occupies a volume of 3.32 L.
three functions of the stem
The three functions of the stem:
To support the leaves,To conduct water, and To conduct minerals to the leaves.Which of the following is the best definition of nuclear fission?
O A. Nuclear fission is the joining of two or more nuclei into one
nucleus.
B. Nuclear fission is the formation of new isotopes through a gain of
electrons.
C. Nuclear fission is the splitting of a nucleus into two or more
nuclei.
O D. Nuclear fission is an exothermic reaction between two stable
nuclei.
Answer:
C
Explanation:
Nuclear fission is a process where the nucleus of an atom is split into two or more smaller nuclei, known as fission products.
Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , therefore option (c) is correct.
What do you mean by the nuclear fission ?Nuclear fission is a process in which an unstable nucleus splits into two nuclides and emits neutrons.
The fission process often produces free neutrons and photons and releases a large amount of energy. Therefore , nuclear fission is either a nuclear reaction or a radioactive decay process.
The fission process often produces gamma radiations , and releases a very large amount of energy .
Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , hence option (c) is correct.
Learn more about nuclear fission , here:
https://brainly.com/question/14899304
#SPJ2
examples of metal non-metal and semi metal
Answer:
Semi : Boron [B] Non-Metal : Carbon [C] Metal : Manganese [Mn]
Explanation:
Periodic table I'm guessing!
How much mass does 1 mol of O2 gas have?
O A. 16.00 x 2g
O B. 16.00 x (6.02 x 10^23) g
C. 2 x (6.02 x 10^23) g
D. 16.00 g
Answer:
Option A.
Explanation:
1 mol of anything contains 6.02×10²³ particles.
We know that 1 mol of oxygen gas contains 2 moles of O.
1 mol of oxygen weighs 16 g/mol, the mass for 1 molecule of O.
By the way, the mass for 1 mol of O₂ may be:
Option A → 16 g/mol . 2 mol
32 g
Oyxgen is a dyatomic molecule, that's why we have 2 moles of O.
Another example can be:
1 mol of water (H₂O) contains 2 moles of H and 1 mol of O.
Which organisms release carbon dioxide into the air (abiotic matter) in an ecosystem?
only producers
only decomposers
only consumers
producers, consumers, and decomposers
Answer:
All 3
Explanation:
Decomposers break apart complex organic materials into more elementary substances: water and carbon dioxide, plus simple compounds containing nitrogen, phosphorus, and calcium. All of these components are substances that plants need to grow.
Some decomposers are specialized and break down only a certain kind of dead organism. Others are generalists that feed on lots of different materials. Thanks to decomposers, nutrients get added back to the soil or water, so the producers can use them to grow and reproduce.
If the change in velocity increases, what happens to the acceleration during the same time period?
Acceleration decreases.
Acceleration increases.
Acceleration becomes negative.
Acceleration becomes steady.
Answer:
Acceleration decreases
Answer:
its b
Explanation:
which of these elements has two valence electrons?
a. hydrogen (H)
b. barium (Ba)
c. nitrogen (N)
d. krypton (Kr)
e. bromine (Br)
Use the periodic table to determine the amount of copper and aluminum nitrate formed in the reaction.
Type the correct answer in the box. Express your answer to the correct number of significant figures.
In the reaction,
moles of Cu and
moles of Al(NO3)3 are formed.
Answer:
23, 51
Explanation:
Edmentum/plato
As per the balanced reaction, 2 moles of aluminum metal and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of copper metal. 10 g of Al and 25g of copper nitrate gives 0.08 moles of aluminum nitrate and 0.13 moles of copper.
What is limiting reactant ?A limiting reactant is the reacting species which is not sufficient in amount to complete the reaction. Hence, the limiting reactant determines the yield of the reaction.
The given reaction is written as:
[tex]\rm 3Cu(NO_{3})_{2} + 2Al \rightarrow 2 Al(NO_{3})_{3} + 3Cu[/tex]
2 moles of Al and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of Cu.
Molar mass of copper nitrate = 187.5 g/mol
atomic mass of aluminum = 27 g/mol
then, number of moles in 10 g of Al = 10 g/27 g/mol = 0.37 moles.
number of moles in 25 g of copper nitrate = 25 g/187.5 g/mol = 0.13 moles.
0.37 moles of Al needs 0.5 moles of copper nitrate to react with. Hence, copper nitrate is the limiting reactant.
3 moles of copper nitrate gives 2 moles of aluminum nitrate. Then 0.13 moles will give 2/3rd of 0.13 i e., 0.08 moles of aluminum nitrate. Similarly 0.13 moles copper nitrate gives 0.13 moles of copper metal.
Find more on limiting reactant:
https://brainly.com/question/14225536
#SPJ7
Your question is incomplete. But your complete question probably was:
10 g of aluminum metal reacts with 25 g of copper nitrate. Use the periodic table to determine the amount of copper and aluminum nitrate formed in the reaction.
In the reaction,
moles of Cu and
moles of Al(NO3)3 are formed.
Angiosperms produce brightly colored blooms and sweet-smelling flowers. Why have angiosperms developed these adaptations? A. to ensure seed dispersal B. to keep predators from eating the plants C. to attract pollinators and help ensure fertilization D. to allow time for seed development
Answer:
C
Explanation:
Angiosperms have developed these adaptations because it attracts pollinators which helps the ecosystem grow.
The pH of a solution with a [OH-] of 1x10^-6 is
Answer:
pH = 6
Explanation:
Given that,
The concentration of [OH]⁻ ion is [tex]10^{-6}[/tex].
We need to find the pH of the solution.
We know that,
[tex]pH=-\log[OH]^-[/tex]
Put all the values,
[tex]pH=-\log(10^{-6})\\\\pH=6[/tex]
Hence, the pH of the solution is 6.
how many moles are in 150 grams of water
Answer:
Solution given:
H20=1+1+16=18grams
we have
1 mole of water =18grams
now
150grams of water=1/18*150=25/3 =8.33mole.
150 grams of water =8.33mole.
Note:
mole =given mass/actual mass of molecule/atom
1 mole of water is 18 grams.
Then,
150 grams of water,
→ 1/18 × 150
→ 25/3
→ 8.33333 . . .
Hence, 150 grams of water is 8.3 moles.
Se realiza una mezcla de minerales de Cu y Fe: 20 kg FeS2 (pirita), 70 kg de Fe2O3 (hemetita) 15 kg de CuFe2 (calcopirita) y 90 kg de CuO (tenorita). Calcule: Porcentaje de hierro Porcentaje de cu Porcentaje de azufre y oxigeno
Answer:
34.78% Fe
39.66% Cu
5.48% S
20.07% O
Explanation:
Para resolver esta pregunta debemos hallar la masa de cada átomo en cada mineral. Así, podremos hallar el porcentaje de cada átomo:
Pirita (Fe: 55.845g/mol; S: 32.065g/mol; FeS2: 119.975g/mol)
Masa Fe:
20kg FeS2 * (1*55.845g/mol / 119.975g/mol) = 9.31kg Fe
Masa S:
20kg FeS2 * (2*32.065g/mol / 119.975g/mol) = 10.69kg S
Hemetita (Fe: 55.845g/mol; O: 16g/mol; Fe2O3: 159.688g/mol)
Masa Fe:
70kg Fe2O3 * (2*55.845g/mol / 159.688g/mol) = 48.96kg Fe
Masa O:
70kg Fe2O3 * (3*16g/mol / 159.688g/mol) = 21.04kg O
Calcopirita (Fe: 55.845g/mol; Cu: 63.546g/mol; CuFe2: 175.236 g/mol)
Masa Fe:
15kg CuFe2 * (2*55.845g/mol / 175.236 g/mol) = 9.56kg Fe
Masa Cu:
15kg CuFe2 * (1*63.546g/mol / 175.236 g/mol) = 5.44kg Cu
Tenorita (O: 16g/mol; Cu: 63.546g/mol; CuO: 79.545 g/mol)
Masa O:
90kg CuO * (1*16g/mol / 79.545 g/mol) = 18.10kg O
Masa Cu:
90kg CuO * (1*63.546g/mol / 79.545 g/mol) = 71.90kg Cu
Masa Total: 20kg + 70kg + 15kg + 90kg = 195kg
Porcentaje Hierro:
9.31kg Fe + 48.96kg Fe + 9.56kg Fe / 195kg * 100 =
34.78% Fe
Porcentaje Cobre:
5.44kg Cu + 71.90kg Cu / 195kg * 100 =
39.66% Cu
Porcentaje Azufre:
10.69kg S / 195kg * 100 =
5.48% S
Porcentaje Oxígeno:
21.04kg O + 18.10kg O/ 195kg * 100 =
20.07% O
