Answer:
expande
forman se alejan
Explanation:
Según las leyes de los gases ideales;
La ley de Charles establece que el volumen de una masa dada de gas ideal es directamente proporcional a su temperatura a la presión simultánea.
Esto significa que cuando se calienta una masa dada de gas ideal, el gas se expande y las moléculas de gas se alejan unas de otras de acuerdo con la ley de Charles.
Cotton plant is mainly harvested at flowering stage true false
The Austrian monk and scientist Gregor
studied the traits of pea plants. He could see that pea plant traits were passed from parents to offspring in a process called
.
Answer:
Mendel, Inheritance/Heredity
Explanation:
Gregor Mendel (1822-1884) was an Austrian monk and scientist as stated in this question. He is referred to as the FATHER OF GENETICS due to his immense contributions to the principle of inheritance.
Gregor Mendel via his several works conducted on pea plants was able to demonstrate how traits passed down from parents to offsprings in a process called INHERITANCE OR HEREDITY.
Your Answer is : 1st Mendel and 2nd heredity.
Explanation:
Which expression is equal to f(x) · g(x)?
Answer:
C. x⁴ + 6·x³ - 12·x - 72
Explanation:
The given functions are;
[tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex]
g(x) = x³ -12
We have that [tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex] = [tex]f(x) =\sqrt{(x + 6)^2}[/tex] = (x + 6)
Therefore;
f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = (x + 6) × (x³ - 12)
(x + 6) × (x³ - 12) = x⁴ - 12·x + 6·x³ - 72 = x⁴ + 6·x³ - 12·x - 72
∴ f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = x⁴ + 6·x³ - 12·x - 72
The field around a negatively charged object is symbolized by vectors pointing toward the sphere because a test charge, which is ______ by definition, would travel along such a vector if released in the field.
Positive
Negative
Answer:
Positive
Explanation:
Suppose that you chose sodium carbonate to precipitate the chromium ions from a solution of chromium (III) chloride. Write and balance the equation of this double-displacement reaction.
If the solution has a volume of 520 mL and the concentration of chromium (III) chloride is 0.224 M, how many grams of sodium carbonate should you add to the solution to precipitate out all the chromium ions?
Answer:
18.5g Na2CO3
Explanation:
Chromium (III) chloride, CrCl3, reacts with Na2CO3 as follows:
2CrCl3 + 3Na2CO3 → Cr2(CO3)3(s) + 6NaCl
Where 2 moles of CrCl3 react with 3 moles of Na2CO3 to produce 1 mole of Cr2(CO3)3 -The precipitate-
To solve this question we need to find the moles of CrCl3 added. With the chemical equation we can find the moles of Na2CO3 and its mass as follows:
Moles CrCl3:
520mL = 0.520L * (0.224mol/L) = 0.116 moles CrCl3
Moles Na2CO3:
0.116 moles CrCl3 * (3 mol Na2CO3 / 2mol CrCl3) = 0.175 moles Na2CO3
Mass Na2CO3 -Molar mass: 105.99g/mol-
0.175 moles Na2CO3 * (105.99g/mol) = 18.5g Na2CO3
If aluminum is placed in an aqueous solution of silver nitrate and a single replacement reaction happens, what would be the balanced equation to represent the reaction?
Answer:
The balanced equation would be:
3AgNO3+Al→3Ag+Al(NO3)3
Explanation:
heyy guys, so basically i need help with stoichiometric calculation I will give you 100 points just to answer all of these answers accurately with working out (ps ill mark you brainliest x), thanks. PLEASE HELPPP. I'm desperate x
3. What masses of ethanol and ethanoic acid would need to be reacted together to give 1 g of ethyl ethanoate?
C^2H^5OH + CH^3CO^2 H → CH^3CO^2C^2H^5 + H^2O
4. What mass of iron(III) oxide would need to be reduced to produce 100 tonnes of iron in a blast furnace?
Fe^2^O^3 + CO → Fe + CO^2
5. What mass of silver nitrate as a solution in water would need to be added to 5 g of sodium chloride to
ensure complete precipitation of the chloride?
AgNO^3(aq) + NaCl (aq) → AgCl (s) + NaNO^3(aq)
6. Copper(II) oxide reacts with sulphuric acid to produce copper(II) sulphate. If this is allowed to crystallise the formula of the crystals is CuSO 4 .5H 2 O. What mass of copper oxide would be needed to produce 100 g of crystals?
CuO + H^2O + H^2SO^4 = CuSO^4 .5H^2O
7. In the following reactions calculate the mass of precipitate formed from 20 g of the metal salt in each case.
a. ZnSO^4 (aq) + 2NaOH → Zn(OH)^2(s) + Na^2SO^4(aq)
b. Al^2 (SO^4 ) 3(aq) + 6NaOH → 2Al(OH)^3(s) + 3Na^2SO^4(aq)
c. MgSO^4(aq) + 2NaOH → Mg(OH)^2(s) + Na^2^SO^4(aq)
Answer:
3. The mass of ethanol required is approximately 0.522869 g
The mass of ethanoic acid required is approximately 0.68156 g
4. The mass of iron (III) oxide required is approximately 285.952.189.095 tonnes
5. The mass of silver nitrate required is approximately 14.53 grams
6. The mass of copper oxide that would be needed is approximately 31.86 grams
7. a. The mass of the precipitate, Zn(OH)₂ formed is approximately 49.712 grams
b. The mass of the precipitate, Al(OH)₃ formed is approximately 13 grams
c. The mass of the precipitate, Mg(OH)₂, formed is approximately 14.579925 grams
Explanation:
3. The 1 mole of ethanol and 1 mole of ethanoic acid combines to form 1 mole of ethyl ethanoate
The number of moles of ethyl ethanoate in 1 gram of ethyl ethanoate, n = 1 g/(88.11 g/mol) = 1/88.11 moles
∴ The number of moles of ethanol = 1/88.11 moles
The number of moles of ethanoic acid = 1/88.11 moles
The mass of ethanol = (46.07 g/mol) × 1/88.11 moles = 0.522869 g
The mass of ethanoic acid in the reaction = 60.052 g/mol × 1/88.11 moles ≈ 0.68156 g
4. 1 mole of iron(III) oxide reacts with 1 mole of CO₂ to produce 1 mole of iron
The number of moles in 100 tonnes of iron= 100000000/55.845 = 1790670.60614 moles
The mass of iron (III) oxide required = 159.69 × 1790670.60614 = 285952189.095 g ≈ 285.952.189.095 tonnes
5. The number of moles of NaCl in 5 grams of NaCl = 5 g/58.44 g/mol = 0.0855578371 moles
The mass of silver nitrate required, m = 169.87 g/mol × 0.0855578371 moles ≈ 14.53 grams
6. The number of moles of CuSO₄·5H₂O in 100 g of CuSO₄·5H₂O = 100 g/(249.69 g/mol) ≈ 0.4005 moles
The mass of copper oxide required, m = 79.545 g/mol × 0.4005 moles ≈ 31.86 grams
7. a. The number of moles of NaOH in the reaction = 20 g/(39.997 g/mol) ≈ 0.5 moles
2 moles of NaOH produces 1 mole of Zn(OH)₂
0.5 moles of NaOH will produce 0.5 mole of Zn(OH)₂
The mass of 0.5 mole of Zn(OH)₂ = 0.5 mole × 99.424 g/mol = 49.712 grams
The mass of the precipitate, Zn(OH)₂ formed = 49.712 grams
b. 6 moles of NaOH produces 2 moles Al(OH)₃
20 g, or 0.5 mole of NaOH will produce (1/6) mole of Al(OH)₃
The mass of the precipitate, Al(OH)₃ formed, m = 78 g/mol×(1/6) moles = 13 grams
c. 2 moles of NaOH produces 1 mole of Mg(OH)₂, therefore;
20 g or 0.5 moles of NaOH formed (1/4) mole of Mg(OH)₂
The mass of the precipitate, Mg(OH)₂, formed, m = 58.3197 g/mol × (1/4) moles = 14.579925 grams
Answer:
Explanation:
i will show in details how 2 do the 1st Q n u can do the rest by following the way how it is done
3. given C^2H^5OH + CH^3CO^2H → CH^3CO^2C^2H^5 + H^2O
molar ratio of ethanol, ethanoic acid and ethyl ethanoate is 1 : 1 : 1
so mass = no. of moles * molecular mass
for same no. of moles, mass / molecular mass is the same
molecular mass of CH^3CO^2C^2H^5 = 12+1*3+12+16*2+12*2+5*1 = 88
molecular mass of C^2H^5OH = 12*2+1*5+16+1 = 46
molecular mass of CH^3CO^2H = 12+1*3+12+16*2+1 = 60
1 g of ethyl ethanoate = 1/88 mole
it requires 1/88*46 = 0.5227 g of ethanol; and
1/88*60 = 0.6818 g of ethanoic acid
to react together to form 1 g of ethyl ethanoate
True or false The atomic number of an element is always more than the mass number of that element.
Put these atoms in order from most negative overall charge to least negative
overall charge.
11 Atom X: 104 protons, 102 electrons
11 Atom B: 24 protons, 18 electrons
1 Atom Q: 15 protons, 16 electrons
11. Atom P: 7 protons, 10 electrons
Answer:
3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?
Explanation:
Put these atoms in order from most negative overall charge to least negative
overall charge.
11 Atom X: 104 protons, 102 electrons
11 Atom B: 24 protons, 18 electrons
1 Atom Q: 15 protons, 16 electrons
11. Atom P: 7 protons, 10 electrons
Select the correct answer.
Which missing item would complete this beta decay reaction?
ОА. 0,-1В
OB. 0,0y
OC. 4,2He
OD. 0,1n
Reset
Answer:
Option A. ⁰₋₁β
Explanation:
Let the unknown be ʸₓA
Thus, the equation given becomes:
⁹⁸₄₃Tc —> ⁹⁸₄₄Ru + ʸₓA
Next, we shall determine the value of x, y and A in order to obtain the answer to the question. This can be obtained as follow:
43 = 44 + x
Collect like terms
43 – 44 =
–1 = x
x = –1
98 = 98 + y
Collect like terms
98 – 98 = y
0 = y
y = 0
ʸₓA => ⁰₋₁A => ⁰₋₁β
Thus, the complete equation is
⁹⁸₄₃Tc —> ⁹⁸₄₄Ru + ⁰₋₁β
The missing item is ⁰₋₁β
Which best describes a swimming pool?
A.
It is a solute.
• B.
It IS
solvent.
C.
It is solution.
D.
It is a reactant.
•
E.
It is a product.
Answer:
Swimming pool is an example of solution
Explanation:
It has water (solvent) and dissolve ion (solute)
Answer:
it is a solution
Explanation:
the combining of (water and Cl and other pool chemicals) make it a solution.
what are condition for formation of electrovalent bond
Answer:
The conditions for the formation of an electrovalent bond are as follows: The atom which changes into cation (+ ive ion) should possess 1,2 or 3 valency electrons. It will loose these electrons to form cation with +1,+2 or +3 charge
The combination of ions most likely to produce a precipitate is Group of answer choices Mg2 and C2H3O2-. Fe3 and OH-. Li and PO43-. Pb2 and NO3-. NH4 and SO42-.
Answer:
The combination of ions most likely to produce a precipitate is a group of answer choices:
lead nitrate soluble in water
Mg2+ and C2H3O2-.
Fe3+ and OH-.
Li+ and PO43-.
Pb2+ and NO3-.
NH4+ and SO42-.
Explanation:
Among the given options,
magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.
The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.
[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.
Match the factors which affect the rate of dissolving/dissociation/diffusion.
1. increased surface area
2. like dissolves like
3. temperature
4. stirring spreads
rate proportional to kinetic energy
matching polarity
finely divided solute
solute throughout solution
Answer:
Increased surface area - finely divided solute
like dissolves like - matching polarity
temperature - rate proportional to kinetic energy
stirring spreads - solute throughout solution
Which has more mass, 2 kg of steel or 5 kg of feather.
Answer:
5 kg of feather
Explanation:
an organic compound on analysis yielded 2.04g carbon, 0.34g hydrogen, 2.73g oxygen. calculate the empirical formula
Answer:
CH2O
Explanation:
According to this question:
C = 2.04g
H = 0.34g
O = 2.73g
First, we divide the mass value of each element by its atomic mass to convert to moles.
C = 2.04g ÷ 12 = 0.17mol
H = 0.34g ÷ 1 = 0.34mol
O = 2.73g ÷ 16 = 0.17mol
Next, we divide by the smallest mole value (0.17):
C = 0.17mol = 0.17 = 1
H = 0.34mol ÷ 0.17 = 2
O = 0.17mol ÷ 0.17 = 1
The whole number ratio of C,H,O is 1:2:1, hence, the empirical formula is CH2O.
If a substance contains ionic bonds, then its properties would include
Answer:
If the substance has high melting/boiling point, if it requires high temperature to dissociate into simpler particles, if it's structure is hard and if it conducts heat and electricity quite frequently, then it would be "Ionic compound" otherwise, it will be covalent compound.Explanation:
If a substance contains ionic bonds, then it’s properties would include high melting and boiling points, a crystalline structure, the ability to dissolve quite easily in water, the ability to conduct electricity, have good insulation and lastly be quite hard and brittle.
If my answer was helpful, would you consider giving me a “Brainliest”?. Thank you :)
Dominic needs some bleach to clean up a spill. He finds a bottle of cleaning solution, but there is no label on it. What should he do
Answer:
He should ask an adult if they know what the solution is. if they dont, put it back and find a different cleaning solution to use
Answer the two questions for 15pts
Answer:
For 1: 6.68 g of nitrogen dioxide will contain [tex]8.73\times 10^{22}[/tex] number of molecules
For 2: The given amount of nitrogen dioxide molecules has a mass of 41.31 g.
Explanation:
According to the mole concept:
1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For 1:We are given:
Mass of nitrogen dioxide = 6.68 g
Molar mass of nitrogen dioxide = 46 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of nitrogen dioxide}=\frac{6.68g}{46g/mol}=0.145mol[/tex]
Using above concept:
If 1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules
So, 0.145 moles of nitrogen dioxide will contain = [tex](0.145\times 6.022\times 10^{23})=8.73\times 10^{22}[/tex] number of molecules
Hence, 6.68 g of nitrogen dioxide will contain [tex]8.73\times 10^{22}[/tex] number of molecules
For 2:We are given:
Molecules of nitrogen dioxide = [tex]5.41\times 10^{22}[/tex] molecules
Using the above concept:
If [tex]6.022\times 10^{23}[/tex] number of molecules are present in 1 mole of a compound
So, [tex]5.41\times 10^{22}[/tex] number of molecules will be present in = [tex]\frac{1mol}{6.022\times 10^{23}}\times 5.41\times 10^{22}=0.898[/tex] moles of nitrogen dioxide
We know, molar mass of nitrogen dioxide = 46 g/mol
Using equation 1:
[tex]0.898mol=\frac{\text{Mass of nitrogen dioxide}}{46g/mol}\\\\\text{Mass of nitrogen dioxide}=0.898mol\times 46g/mol=41.31g[/tex]
Hence, the given amount of nitrogen dioxide molecules has a mass of 41.31 g.
thank you so much for putting all the answers in there
Answer:
[tex]\huge\color{cyan}{\colorbox{magenta}{Answer}}[/tex]
thank you
why are metal containers not used for storing acids
Metal containers are not used for storing acid because most of the time acid reacts with almost every metal and produces salts or oxides which alters the acid characteristics making it useless....
A 80°C la presion de vapor del benceno (C6H6) es de 1 atm. Calcula la cantidad de hexano (C6H14) que debemos añadir a 200g de benceno para que su presion de vapor sea de 700mm de Hg
Answer:
18,9g de hexano son necesarios
Explanation:
Basados en la ley de Raoult, la presión de vapor ejercida por una solución es:
P = P°*Xsolvente
Donde P es la presión de la solución deseada = 700mmHg, P° la presión de vapor de vapor del benceno = 1atm = 760mmHg y X es la fracción molar del solvente (Benceno).
Reemplazando:
700mm Hg = 760mmHg * X(Benceno)
0.9211 = X(Benceno)
La fracción molar de benceno se define como:
X = Moles benceno / Moles benceno + Moles hexano
Moles benceno -Masa molar: 78g/mol-
200g * (1mol/78g) = 2.5641 moles benceno
X = Moles benceno / Moles benceno + Moles hexano
0.9211 = 2.5641 moles benceno / 2.5641 moles benceno + Moles hexano
0.9211moles Hexano + 2.3618 = 2.5641
0.9211*Moles Hexano = 0.2023
Moles hexano = 0.2023/0.9211 = 0.2196 moles hexano.
Masa Hexano -Masa molar: 86g/mol-
0.2196 moles hexano * (86g/mol) =
18,9g de hexano son necesariosLa cantidad de hexano (C6H14) que se debe agregar a 200 g de benceno para permitir que la presión de vapor se convierta en 700 mm de Hg sería:
18.9 g
Usando la ley de Raoult, la presión de vapor que libera una solución se encuentra por:
P = P ° × X disolvente
Donde (P) denota la presión de la solución deseada
P ° denota la presión de vapor del benceno y
X denota la fracción molar del disolvente (benceno).
En el caso dado,
(P) = 700 mmHg,
P° = 1atm = 760mmHg
Fracción molar de benceno = 0,9211 (∵ 700/760)
La fracción molar de benceno (X) = Moles de benceno/Moles de benceno + Moles de hexano
Moles de benceno - Masa molar: 78g / mol - 200 g × (1 mol / 78 g)
= 2.5641 moles de benceno
X = Moles de benceno/Moles de benceno + Moles de hexano
0.9211 = 2.5641 moles Benceno/2.5641 moles Benceno + Moles de Hexano
⇒ 0,9211 × moles de Hexano + 2,3618 = 2,5641
⇒ 0.9211 × moles de Hexano = 0.2023
∵ Moles de Hexano = 0.2023/0.9211
[tex]= 0.2196 moles[/tex]
[tex]Hexane mass - Molar mass = 86g/mol - 0.2196 mole hexane[/tex] × [tex](86g/mole)[/tex]
[tex]= 18.9g[/tex]
Por tanto, 18,9 g es la respuesta correcta.
Learn more about "Benzene" here:
brainly.com/question/25798187
what is the difference between chemistry with other natural science
Answer:
Hi!
chemistry;
unlike others, is more about atomic structure.
HAVE A NİCE DAY
Explanation:
GREETİNGS FROM TURKEY ツ
Answer:
CHEMISTRY means the study of matter and the different chemical reactions that any substance goes through, like, matters composition, structure, shape, state, etc. while geology, biology and physics are the other branches of science and chemistry acts as a bridge between physics and geology with biology.
hope it helps
have a nice day
radical example ....
For the equilibrium
2H2S(g) ⇋ 2H2(g) + S2(g) Kc = 9 .0X 10-8 at 700°C
the initial concentrations of the three gases are 0.300 M H2S, 0.300 M H2, and 0. 1 50 M S2' Determine the equilibrium concentrations of the gases.
Answer:
Equilibrium concentrations of the gases are
[tex]H_2S=0.596M[/tex]
[tex]H_2=0.004 M[/tex]
[tex]S_2=0.002 M[/tex]
Explanation:
We are given that for the equilibrium
[tex]2H_2S\rightleftharpoons 2H_2(g)+S_2(g)[/tex]
[tex]k_c=9.0\times 10^{-8}[/tex]
Temperature, [tex]T=700^{\circ}C[/tex]
Initial concentration of
[tex]H_2S=0.30M[/tex]
[tex]H_2=0.30 M[/tex]
[tex]S_2=0.150 M[/tex]
We have to find the equilibrium concentration of gases.
After certain time
2x number of moles of reactant reduced and form product
Concentration of
[tex]H_2S=0.30+2x[/tex]
[tex]H_2=0.30-2x[/tex]
[tex]S_2=0.150-x[/tex]
At equilibrium
Equilibrium constant
[tex]K_c=\frac{product}{Reactant}=\frac{[H_2]^2[S_2]}{[H_2S]^2}[/tex]
Substitute the values
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
[tex]9\times 10^{-8}=\frac{(0.30-2x)^2(0.150-x)}{(0.30+2x)^2}[/tex]
By solving we get
[tex]x\approx 0.148[/tex]
Now, equilibrium concentration of gases
[tex]H_2S=0.30+2(0.148)=0.596M[/tex]
[tex]H_2=0.30-2(0.148)=0.004 M[/tex]
[tex]S_2=0.150-0.148=0.002 M[/tex]
NEED AN ANSWER ASAP!!! PLSSS
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Answer:
In both voltaic and electrolytic cells, oxidation occurs at the anode, while reduction occurs at the cathode. Thus, both these cells exhibit redox reactions. In both these cells, electrons flow from the anode to the cathode through the externally connected conductor.
Answer:
ELECTROLYTIC CELL
An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.
EXAMPLE
Nelsons cell and Downs cell
VOLTAIC CELL OR GALVANIC CELL
The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.
EXAMPLE
Daniel cell
Explanation:
In this equation, what does n represent?
OA number of electrons in the cell
OB number of electrons in the reactants
OC number of moles of electrons transferred
OD number of products in the equation
OE number of reactants in the quotient
Answer:
the number of electrons in the cell
What is the frequency of a wave that has a wavelength of 28 m? c = λυ where c = 2.998 x 108 m/s
a. 1.07 x 107 Hz
b. 2.3 x 107 Hz
c. 10 Hz
d. 10.7 Hz
Answer:
The frequency of a wave that has a wavelength of 28 m is 1.07*10⁷ Hz.
Explanation:
Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave's disturbance propagates along its displacement. Relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f * λ.
Being:
v= 2.998*10⁸ m/sf= ?λ= 28 mReplacing:
2.998*10⁸ m/s= f* 28 m
Solving:
[tex]f=\frac{2.998*10^{8}m/s }{28m}[/tex]
f= 1.07*10⁷ Hz
The frequency of a wave that has a wavelength of 28 m is 1.07*10⁷ Hz.
Balance the equation of. _C + _O2 -- _CO
Explanation:
2C +O2 = 2CO
this will be the answer
a sample of unknown material weighs 500 n in air and 200 n when immesersed in alcholol with a specfic gravity of 0.7 what is the mass density
Answer: The mass density is 1166.36 [tex]kg/m^{3}[/tex].
Explanation:
Given: Weight of sample in air [tex](F_{air})[/tex] = 500 N
Weight of sample in alcohol [tex](F_{alc})[/tex] = 200 N
Specific gravity = 0.7 = [tex]0.7 \times 1000 = 700 kg/m^{3}[/tex]
Formula used to calculate Buoyant force is as follows.
[tex]F_{B} = F_{air} - F_{alc}\\= 500 - 200 \\= 300 N[/tex]
Hence, volume of the material is calculated as follows.
[tex]V = \frac{F_{B}}{\rho \times g}[/tex]
where,
[tex]F_{B}[/tex] = Buoyant force
[tex]\rho[/tex] = specific gravity
g = acceleration due to gravity = 9.81
Substitute the values into above formula.
[tex]V = \frac{F_{B}}{\rho \times g}\\= \frac{300}{700 \times 9.81}\\= \frac{300}{6867}\\= 0.0437 m^{3}[/tex]
Now, mass of the material is calculated as follows.
[tex]mass = \frac{F_{air}}{g}\\= \frac{500 N}{9.81}\\= 50.97 kg[/tex]
Therefore, density of the material or mass density is as follows.
[tex]Density = \frac{mass}{volume}\\= \frac{50.97 kg}{0.0437 m^{3}}\\= 1166.36 kg/m^{3}[/tex]
Thus, we can conclude that the mass density is 1166.36 [tex]kg/m^{3}[/tex].
