Explanation:
If the iceberg is near the lake and the water molecules melt, then the molecules will slide down. The iceberg could be melting for many reasons - it can be purposely destroyed, the sun could be melting it, or it might naturally fall in. So, this is the answer to your question. Hope it helps!
A chemist determines by measurements that 0.0550 moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen gas that participates.
Be sure your answer has the correct number of significant digits.
The mass of nitrogen gas that participated in the chemical reaction is 1.54g
HOW TO CALCULATE MASS OF AN ELEMENT:
Mass of a substance can be calculated by multiplying the number of moles in mol of the substance by its molecular mass in g/mol. That is;mass (M) = molar mass (MM) × number of moles (n)According to this question, a chemist determines by measurements that 0.0550 moles of nitrogen gas (N2) participate in a chemical reaction.
The molecular mass of nitrogen gas (N2) = 14.01(2)= 28.02g/mol
Hence, the mass of the nitrogen gas that participated in the chemical reaction is calculated as follows:
Mass (g) = 0.0550 mol × 28.02 g/molMass = 1.5411Therefore, the mass of nitrogen gas that participated in the chemical reaction is 1.54g
Learn more: https://brainly.com/question/18269198
What exactly is a proton? Is it a member of the periodic table?
The atomic number is the number of protons in the nucleus of an atom. The number of protons define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).
Calculate K for 2CO2(g) ⇔ 2CO(g) + O2(g)
given that the equilibrium concentrations of carbon monoxide, oxygen and carbon dioxide are 2.0 x 10-6 M, 1.0 x 10-6 M, and 0.25 M respectively.
Explanation:
here's the answer to your question
I need help!!!! please
6.94 is much more closet to 7.016, so Li 7 is more abundant
full form of soil pH
Answer:
PH STANDS FOR POTENTIAL OF HYDROGEN .
It represents the ratio of Hydronium ions (H3O) to Hydroxide ions (OH). It is a measure of acidity and alkalinity of a solution.
FOLLOW MEwater and development are substitute of one another.
explanation with it, please
Which of the following is NOT a physical property?
Viscosity
Reactivity
Malleability
Density
Answer:
reactivity is NOT a physical property
A scientist wants to know: "If salt is added to water, would the
solution still boil at the same temperature?"
torcses
Answer:
no, the sollution will boil at a higher temperature because the density of the sollution will increase when salt is added to it
The number of grams of helium in a balloon at a pressure of 99.8 kPa, a temperature of 301 K, and a volume of 0.785 L would be
Options:
814 g
0.125 g
0.278 g
337 g
The number of grams of helium in a balloon at a pressure of 99.8 kPa, a temperature of 301 K, and a volume of 0.785 L would be 0.125g.
How to calculate mass?The mass of a substance can be calculated by multiplying the number of moles by its molar mass.
However, the number of moles of helium must be calculated as follows:
PV = nRT
Where;
P = pressureV = volumen = no of molesR = gas law constantT = temperature0.985 × 0.785 = n × 0.0821 × 301
0.773 = 24.7n
n = 0.773 ÷ 24.7 = 0.031moles
mass of He = 0.031 × 4 = 0.125g
Therefore, the number of grams of helium in a balloon at a pressure of 99.8 kPa, a temperature of 301 K, and a volume of 0.785 L would be 0.125g.
Learn more about mass at: https://brainly.com/question/19694949
#SPJ6
6.25 g of HCl(g), a strong acid, is dissolved in water to make a 280-ml solution.
Calculate the pH of the resulting solution.
pH= -log[0,611]= 0,21
2(3a-3)-2(a-2)=3
thank you
Answer:
6a - 6 - 2a + 4 = 3
4a - 2 = 3
4a = 3 + 2
4a = 5
a = 5/4
hope that helps ✌
two easy uses of mixture
Explanation:
it helps to make juices.
It helps to make concentrated acid into dilute acid.
Answer:
Explanation:
Here are a few more examples:
1. Smoke and fog (Smog)
2. Dirt and water (Mud)
If the temperature of a reversible reaction in dynamic equilibrium decreases, how will the equilibrium change?
A. It will shift towards the endothermic reaction.
B. It will not change.
C. It will shift towards the products.
D. It will shift towards the exothermic reaction.
Answer:
D. It will shift towards the exothermic reaction.
Explanation:
what is meant by the term "boiling point of water"
Answer:
boiling point, temperature at which the pressure exerted by the surroundings upon a liquid is equaled by the pressure exerted by the vapour of the liquid; under this condition, addition of heat results in the transformation of the liquid into its vapour without raising the temperature
in case of water boiling point bring 0 degree
Answer:
it is the temperature at which water starts to boil. the temperate is 100°C or 212°F
1a.calculate the relative formula mass of magnesium oxide when the relative atomic masses are O=16 Mg=24
1b.calculate the percentage by mass of magnesium in magnesium oxide
here's the answer to your question
The relative mass of the magnesium oxide (MgO) is equal to 40 g. The percentage by mass of magnesium in MgO is 60 %.
What is the mass percentage?The mass percentage of any element in a particular compound can be calculated from the number of parts by mass of the element in 100 parts by mass of a given compound.
Calculate the molar mass of the given compound by adding the atomic masses of the present elements. Then, the percentage of each element can be determined by dividing the total mass of the element by the molar mass of the compound multiplied by 100.
Given, the molecular formula of magnesium oxide is MgO. The atomic mass of Mg and O is 24 g and 16 g respectively.
The relative formula mass of the MgO = 40 g/mol
The mass percentage of the Mg = (24/40) × 100 = 60 %
Therefore, the mass percentage of the Mg in MgO is equal to 60 %.
Learn more about the mass percentage, here:
brainly.com/question/16750428
#SPJ2
At the beginning of the reaction: N2 + 3H2 -> 2NH there is 1 mol of N. and 3 moles of H, and at the end of it is present a mixture formed by 2.5 moles in total, what is the performance for the reaction?
5.- Al comenzar la reacción: N2+ 3H2 -> 2NH existe 1 mol de N. y 3 moles de H, y al finalizarla está presente una mezcla formada por 2,5 moles en total, ¿cuál es el rendimiento para la reacción?
Answer:
75%
Explanation:
call realistic moles of N2 in the reaction is a
moles of H2 :3a
moles of NH3: 2a
the moles of residual N2 after reaction: 1-a
the moles of residual H2 after react: 3- 3a
the moles of mixture: 2a+1-a+3-3a=2.5
-> a=0.75
H=0.75/1=75%
9. During an experiment the students prepared three mixtures A)Starch in water B) Sodium chloride solution C) Tincture of Iodine. i) Students observed a visible beam of light through mixture A. Why? ii) Tincture of lodTe did not show Tyndall effect. Explain reason. ill) How can you relate particle size to Tyndall effect?
Answer:
See explanation
Explanation:
Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.
In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.
Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.
A compound was found to contain 90.6% lead (Pb) and 9.4% oxygen. What is the empirical formula for this compound?
Answer:
the answer is 47.9 and ik because I just had that question
The empirical formula of the compound is O₄Pb₃.
What is the empirical formula?
An Empirical system is the chemical system of a compound that offers the proportions of the elements gifted within the compound however not the real numbers or arrangement of atoms. This would be the lowest complete variety ratio of the elements within the compound.
Amount of lead (Pb) = 90.6%
⇒and amount of oxygen = 9.4%
taking the whole number ratio
o = 4
Pb = 3
∴ ⇒O: Pb=4:3
O4Pb3 answer.
Learn more about empirical formula here:-https://brainly.com/question/1603500
#SPJ2
A piece of sodium metal can be described as?
that B) My color is sickle: I have a drop of water in my body when I was given heat, white powder was formed So who am i Lets identify. Write my chemical molecular formula
Explanation:
i don't understood your question ⁉️
and what do u mean by my color is sickle
I forgot to add the answers i had to my question (While a balloon is being filled, if the temperature of the air in the balloon increases, what happens to it’s volume)
A) It stays the same
B) It deflates
C) It decreases
D) It increases
The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .
Liquids which do not wer the glass surface form a convex meniscus.True or false
Answer:
true is your answer
Explanation:
hope it helps
1. Mg + HCl … + ….
2. NaOH + HNO3 … + ….
3. KOH + CuCl2 … + ….
4. Na2SO4 + BaCl2 … + ….
5. HCl + FeO à … + …
Explanation:
The answer is mentioned above.
Hope it helps.
A chemist sets up a chemical reaction but finds that none of the reactant molecules have the required activation energy. What is the result?
A.
Products will form with less energy input.
B.
No products will be formed.
C.
The products will form too quickly.
D.
Products will convert to reactants.
Answer:
B.
No products will be formed.
When 120 g of carbon reacts completely with 320 g of oxygen the mass of carbon dioxide formed will be?
5+64
this is TOTALLY SOOOO hard so help me
^thats what she said
Answer:
69
Explanation:
I thought that I answer is correct
Answer:
The answer is 69
Explanation:
Because if you add one its 66, and so on, hope this helps! but if you add five it will be 69, if you need help with easy equations let me know
El hipoclorito de sodio (NaClO), es vendido en una solución clara de ligero color verde-amarillento y un olor característico que se conoce con el nombre genérico Límpido, con una concentración del 6%. Pero para la desinfección de superficies el Límpido, debe ser diluido al 0,5%. Cuánto Límpido debemos sacar del recipiente para obtener 200 ml de una solución al 0,5%.
Respuesta:
16,7 mL
Explicación:
Paso 1: Información provista
Concentración inicial (C₁): 6%Volumen inicial (V₁): ?Concentración final (C₂): 0,5%Volumen final (V₂): 200 mLPaso 2: Calcular el volumen de la solución concentrada
Queremos preparar una solución diluida de hipoclorito de sodio a partir de una concentrada. Podemos calcular el volumen inicial que debemos tomar usando la regla de dilución.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0,5% × 200 mL / 6% = 16,7 mL
in h-atom if x is radius of first bohrs orbit de broglie wavelength of an atom in 3rd orbit is a.3πx b.6πx c.9x/2 d.x/2
please I need complete explanation fast
Answer:
can you type question properly.
hii pls help me to balance the equation and state the symbols thanksss
Ca(s)+ H2O (l)----->H2 +Ca(oH)2
Ca(s)+2H2O(l)----->H2(g)+Ca(oH)2
I hope this helps
sorry if it's wrong
The reactivity of elements can be predicted based on the position of an element in the periodic table. Based on the periodic table, which of the following elements would be expected to be the most reactive?
Iodine (I)
Iodine (I)
Chlorine (Cl)
Chlorine (Cl)
Fluorine (F)
Fluorine (F)
Bromine (Br)
Answer:
Chlorine (Cl) is most reactive out the the listed elements.
Answer:
iodine
Explanation:
It is the most reactive on the periodic table.