Does light travel faster than sound?

Answer:

In the presence of UV light, ethane will react with bromine in a substitution reaction. UV light is the condition under which the reaction will occur so it is written above the arrow in the chemical equation. As the reaction proceeds, the intensity of the re-brown colour of the bromine water decreases.

Answer:

here ya go

Explanation:

combining bromine and ethane leads to a brown gas or liquid which is made of the elements. it is a gas at room temperature and does not affect human beings. there are many uses for bromine compounds but they are mainly used for the manufacturing of chlorine, fire retadants, water purification, graphy chemicals and pharmaceutcals. it is a naturally occurring element that can be found in animals such as sharks since they produce their own.

Answer:

Modern recorders are most commonly pitched at A=440 Hz, but among serious amateurs and professionals, other pitch standards are often found. For the performance of baroque music, A=415 Hz is the de facto standard, while pre-Baroque music is often performed at A=440 Hz or A=466 Hz.

Explanation:

Answer:

This is a reversible change. Similarly, if you boil water, it evaporates and becomes water vapor. When you cool this vapor down, it turns back to water. A change which cannot happen backward, that is, it cannot be reversed is called an irreversible change.

Explanation:

When we boil water by heating, then it changes into steam. Now, if we cool the steam, then water is formed again. So, the changing of water into steam has been reversed by cooling. Thus, the boiling of water (or evaporation of water) is a reversible change.

Answer:

(C) Both of these

Explanation:

A beam of electrons has both of these Wave properties and Particle properties.

Answer:

24.30

Explanation:

Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.

(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)/100

24.30 is the average atomic mass (in amu) of element M.

Atomic mass is the quantity of matter contained in an atom of an element.

Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.

(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)

2430.501576 ÷ 100

24.30

Hence, 24.30 is the average atomic mass (in amu) of element M.

Learn more about atomic mass here;

https://brainly.com/question/14250653

#SPJ2

Answer:

1. Q: How does a phase change from solid to liquid occur in a substance?

A. Heat energy is added to the substance, weakening the electrical attraction between molecules.

2. Q: How do weak intermolecular bond strengths affect the melting and boiling point of a substance?

A: Both the melting point and boiling point are lower.

3. Q: Which term or phrase represents a separation of charges in a molecule, resulting in partial positive and partial negative charges?

A: Dipole

4. Q: Which statement explains why water and ethanol have different boiling points?

A: Water and ethanol have different molecular structures

5. Q: Which statement describes the hydrogen and oxygen atoms in water?

A: The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a partial negative charge, while the hydrogen atoms have partial positive charges.

Explanation:

Did it

The statement which best describes the hydrogen and oxygen atoms in

water is that the lone pairs of electrons in the oxygen atom causes the

molecule to be bent; the oxygen atom has a partial negative charge, while

the hydrogen atoms have partial positive charges.

Water is a compound which comprises of the elements hydrogen and

oxygen. They  share electrons in the covalent bond present between the

atoms. The sharing of electrons isn't equal which is why it has a bent

structure.

The oxygen atom has a partial negative charge, while the hydrogen atoms

have partial positive charges present in the compound.

Read more on https://brainly.com/question/20464674

This problem is giving information about the proton concentrations of three solutions at 25 °C. Despite they are not numerically given, we can propose three scenarios to see how to approach the question.

Let the following solutions to come up:

[H⁺] = 2.63x10⁻³ M

[H⁺] = 1.00x10⁻⁷ M

[H⁺] = 4.511x10⁻⁹ M

The first step, will be the calculation of the pH for each solution via:

pH = -log([H⁺])

So that they turn out to be:

pH = -log(2.63x10⁻³ M) = 2.580

pH = -log(1.00x10⁻⁷ M) = 7.000

pH = -log(4.511x10⁻⁹ M) = 8.3457

In such a way, since acidic solutions have a pH below 7, neutral have a pH equal to 7 and basic have it above 7, we infer the first one is acidic, second one is neutral and third one is basic.

Thus, you can reproduce this methodology with the proton concentrations you are given.

Learn more:

Answer:

Explanation:

1) Organic compounds always contain only p-block elements (Groups III-VII), at least one of which must be carbon. 2) Organic compounds almost always contain one or more C-H bonds. ... Thus, all bonds are typically covalent in organic compounds. Methane (CH4) is the prototypical organic molecule.

Methane contains carbon, forming covalent bonds, and is found in living organisms, making it an organic compound.

Methane (CH₄) is considered an organic compound due to its molecular structure and occurrence in living organisms. Organic compounds are primarily composed of carbon atoms covalently bonded to hydrogen and often other elements like oxygen, nitrogen, sulfur, and more.

Methane consists of one carbon atom bonded to four hydrogen atoms through covalent bonds. Carbon's unique ability to form stable covalent bonds with other elements, including itself, leads to the vast diversity of organic molecules found in living organisms.

Methane is a crucial component of natural gas and is produced by various biological and geological processes. It is present in the digestive systems of animals, formed during decomposition, and plays a role in carbon and energy cycles.

Its prevalence in living systems and its molecular structure classify methane as an organic compound, reflecting the foundational principles of organic chemistry.

To learn more about Organic compounds  here

https://brainly.com/question/28682641

#SPJ3

The complete question is :

Methane is called an organic compound why​?

Answer: The answers aplicable would be

1) The greater magnitude of force, the faster the acceleration.

2) Acceleration is caused by unbalanced forces.

Answer:

a formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

Explanation:

Answer:

Explanation:

Un elemento químico, o un elemento, se define como un material que no puede descomponerse ni transformarse en otra sustancia por medios químicos. Cada elemento se identifica según la cantidad de protones que tiene en su núcleo atómico. Se puede crear un nuevo elemento agregando más protones a un átomo.

_________

Espero eso ayude ⚜

ITZY :)

Answer: o.125 moles of gas X with a molar mass of 240

Explanation:

2.8 dm3 of gas X at STP has equal mass with 11.2 dm3 of C2H6 at STP. What is the number of mole if gas X has 30 grams?

the molar volume of any gas at STP is the volume of 1 mole at STP

and is 22.4 L

the C2H6 has a volume of 11.2L at STP so it has 0.5 moles

C2H6 has a molar mass of (2 X 12) +(6 X 1) = 24 + 6 = 30

0,5 moles weighs 15 gm at STP with

so 15 gm at STP with 2.8 L for gas X

PV=nRT

P=1 atm

T =273.2k

V =2.8

R =0.082

n = PV/RT = (1 X 2.8)/(0.082 X 273.2) =0.125 moles of gasX

the weight of gas X is 30 gms

so 30/.125 =240 g/mole = molar mass of gas X

Answer:

[tex] \huge \color{indigo} \boxed{a. \: aldehyde}[/tex]

Explanation:

Pentanal is considered to be a fatty aldehyde lipid molecule. These are compounds containing more than one aldehyde group. Pentanal is a very hydrophobic molecule, practically insoluble in water, and relatively neutral.

Answer:

1. Metals are typically shiny, and good at conducting electricity and heat and have a high melting point. Non-metals are typically dull, and poor at conducting electricity and heat and have a low melting point.

2. Element C and element E.

3. a. It is a poor conductor of electricity

b. It is a good conductor of heat

Explanation:

As it says in the chart at the top of the picture, metals are typically good at conducting electricity and heat and have a high melting point. Non-metals are typically poor at conducting electricity and heat and have a low melting point.

When radioactive decay occurs, the original nucleus splits into daughter nuclei and the resulting nucleus is more stable than the original nucleus. The nucleus can be of a different element than the original.

Unstable nuclei often undergo radioactive decay. In a radioactive decay, the unstable nucleus is broken up into other nuclei. Usually, the nuclei formed during radioactive decay are smaller in mass compared to the original nucleus.

Also, the resulting nucleus is more stable than the original nucleus. The nucleus can be of a different element than the original.

Answer:

radiation travels from its source in the form of energy waves or energized particles

Explanation:

radiation is energy

The small flashlight has less inertia and smaller force is required to move it.

According to Newton's first law of motion, an object will continue at rest or in its state of uniform motion unless it is acted upon by an external unbalanced force. This is also called the law of inertia.

The quantity of mass contained in a body is a measure of its inertia. The greater the mass of the body, the greater the inertia and the greater the force required to move the body.

The smaller flashlight has less inertia than the larger flashlight, so  it takes less force to change the motion of the smaller flashlight.

Learn more about Newton's law : https://brainly.com/question/13678295

Answer:

Frozen Meats – Frozen raw meats that are properly vacuum sealed can be stored in the freezer from 1-3 years depending on the type of meat. However, raw meat that is not vacuum sealed will only last 1-12 months depending on the meat.

Explanation:

hop this helps

Answer: Six months or three years

Explanation: Frozen meats, poultry, and fish can last in the freezer for up to six months and when they are vacuum sealed, frozen meats can stay fresh and free from freezer burn for up to 3 years.

When atoms and molecules speed up or slow down, that is a physical change. When they change state from liquid to solid or from gas to liquid, that is a physical change. ... The ions or molecules can still come back together to form the original substance

The physical change which happens to atoms and molecules in a solution that is strongly heated in a flame is;

Atoms and molecules which are units of matter when strongly heated in a flame have increased internal energy and would undergo a phase change to a more energetic state of matter which is the gaseous state.

As such, the physical change that occurs in them is. increased internal energy.

Read more on heating and Phase change;

https://brainly.com/question/12168850

When the compound shown is treated CH3MgI followed by water, 1,3 - cyclohexadienol is formed.

Grignard reagent is an alkylmagnesium halide. Grignard reagents are important synthetic tools in chemistry. They are used to synthesize and number of compounds in the laboratory.

When the Grignard reagent, CH3MgI is reacted with compound shown followed by treatment with water, the product of the reaction is 1,3 - cyclohexadienol whose structure is shown in the second image attached to this answer.

Learn more: https://brainly.com/question/9309478

Answer:

he presence of nucleus which contains genetic material and is enclosed by a nuclear membrane sets them apart from prokaryotic cells. All complex organisms are eukaryotic and they reproduce by mitosis or meiosis. Eukaryotic cells are typically much larger than those of prokaryotes.

Explanation:

Answer:

see explanation

Explanation:

Break down the following equations into two half equations(One for oxidation, one or reduction )

1. Cu + 2Ag+ ➡️Cu2+ +2Ag

2. Cl2 +2I- ➡️I2 + 2Cl​-

in reaction "1", the copper is being oxidized from 0 to +2 by losing 2 electrons

Cu---->Cu2+   + 2e-in reaction "2

in reaction "1" the silver is being reduced by gaining those 2 e-.

2Ag1+  + 2e----------->2Ag

In reaction "2", the iodine is being oxidized by losing 2 e-

2I- -------------> I2 + 2e

In reaction "2" the chlorine is being reduced by gaining those 2 e

Cl2 + 2e------------> 2Cl-

To solve such this we must know the concept of redox reaction. Therefore, the half reaction for the given reactions can be written as

1. Cu + 2Ag⁺ [tex]\rightarrow[/tex]Cu²⁺ +2A

Cu [tex]\rightarrow[/tex]Cu²⁺   + 2e⁻

2Ag⁺ + 2e⁻[tex]\rightarrow[/tex]2Ag

2.Cl[tex]_2[/tex]+2I⁻ [tex]\rightarrow[/tex]I[tex]_2[/tex] + 2Cl​⁻

2I⁻[tex]\rightarrow[/tex] I[tex]_2[/tex] + 2e⁻

Cl[tex]_2[/tex] + 2e⁻-----------> 2Cl⁻

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

Redox reaction is a chemical reaction where oxidation and reduction takes place simultaneously. Oxidation is loss of electrons and reduction is gain of electrons. The electron transfer from oxidant to reductant.

1. Cu + 2Ag⁺ [tex]\rightarrow[/tex]Cu²⁺ +2A

Cu [tex]\rightarrow[/tex]Cu²⁺   + 2e⁻

2Ag⁺ + 2e⁻[tex]\rightarrow[/tex]2Ag

2.Cl[tex]_2[/tex]+2I⁻ [tex]\rightarrow[/tex]I[tex]_2[/tex] + 2Cl​⁻

2I⁻[tex]\rightarrow[/tex] I[tex]_2[/tex] + 2e⁻

Cl[tex]_2[/tex] + 2e⁻-----------> 2Cl⁻

Therefore, the half reaction for the given reactions can be written as above.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

Answer:

because they are saturated

Answer:

c

Explanation:

just got this question

Answer:

Ionic compounds contain ions and are held together by the attractive forces among the oppositely charged ions

Explanation:

Common salt (sodium chloride) is one of the best-known ionic compounds. Molecular compounds contain discrete molecules, which are held together by sharing electrons (covalent bonding).

Cardenolides, with the chemical formula CH₁₈C₂₀H₁₅CHCO₂ have (D) 23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms.

Milkweed contains a poison known as cardenolides. The chemical formula for cardenolides CH₁₈C₂₀H₁₅CHCO₂.

The subscripts in the formula represent the atomicities, that is the number of atoms of each element in each part of the formula.

We can calculate the total number of atoms of each element by adding its atomicities.

[tex]C = 1 + 20 + 1 + 1 = 23[/tex]

[tex]H = 18 + 15 + 1 = 34[/tex]

[tex]O = 2[/tex]

Cardenolides, with the chemical formula CH₁₈C₂₀H₁₅CHCO₂ have (D) 23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms

Learn more: https://brainly.com/question/13348838

Answer:

Hypertension stage 1 is 130-139 mm of HG

Answer:

The high melting point is also consistent with its description as an ionic solid. In the crystal, each S2− ion is surrounded by an octahedron of six Ca2+ ions, and complementarity, each Ca2+ ion surrounded by six S2− ions.

Explanation:

You can use the periodic table to predict whether an atom will form an anion or a cation, and you can often predict the charge of the resulting ion. Atoms of many main-group metals lose enough electrons to leave them with the same number of electrons as an atom of the preceding noble gas. To illustrate, an atom of an alkali metal (group 1) loses one electron and forms a cation with a 1+ charge; an alkaline earth metal (group 2) loses two electrons and forms a cation with a 2+ charge, and so on. For example, a neutral calcium atom, with 20 protons and 20 electrons, readily loses two electrons. This results in a cation with 20 protons, 18 electrons, and a 2+ charge. It has the same number of electrons as atoms of the preceding noble gas, argon, and is symbolized Ca2+. The name of a metal ion is the same as the name of the metal atom from which it forms, so Ca2+ is called a calcium ion.

When atoms of nonmetal elements form ions, they generally gain enough electrons to give them the same number of electrons as an atom of the next noble gas in the periodic table. Atoms of group 17 gain one electron and form anions with a 1− charge; atoms of group 16 gain two electrons and form ions with a 2− charge, and so on. For example, the neutral bromine atom, with 35 protons and 35 electrons, can gain one electron to provide it with 36 electrons. This results in an anion with 35 protons, 36 electrons, and a 1− charge. It has the same number of electrons as atoms of the next noble gas, krypton, and is symbolized Br−. (A discussion of the theory supporting the favored status of noble gas electron numbers reflected in these predictive rules for ion formation is provided in a later chapter of this text.)