During summer water kept in an earthen pot become cool because of the phenomenon of evaporation.
What are the values of the solute amount in moles and the solution volume in liters.
Answer:
0.250L of solution. 0.250 moles of solute.
Explanation:
As you can see in the image, there is a beaker with an amount of solution. 1/2L are 500mL and each line of the beaker represents 100mL. That means the volume of the solution is approximately 250mL = 0.250L
Molarity is an unit of concentration defined as the moles of solute per liter of solution. A solution that is 1.000M contains 1.000 moles of solute per liter of solution.
As the volume of the solution is 0.250L, the moles are:
0.250L * (1.000mol/L) = 0.250 moles of solute
How many ATOMS of boron are present in 3.61 grams of boron trifluoride ?
Answer:
To determine the number of atoms of Boron that are present within 3.61 grams of Boron Trifluoride, it would be best to convert the grams to moles of the compound and then after that use the Avogadro's number to determine the number of molecules and then use the 1 to 3 ratio to determine the total number of Boron atoms.
Determine the enthalpy for the reaction A+B --> C If we know the following:
A+E --> C+D; delta H = -200 kJ
D+B --> E; delta H = -100 kJ
Explanation:
here is the answer to the question
Of the following transitions in the Bohr hydrogen atom, which of the following
results in the emission of the lowest-energy photon.
n = 1 ® n= 6
n=5 ® n=1
n = 6® n=1
n=3® n=5
n=1 ® n=5
what are neutral salts
Answer:
Salts that produce acidic solutions are acid salts. Neutral salts are those salts that are neither acidic nor basic. Zwitterions contain an anionic and a cationic centre in the same molecule, but are not considered to be salts. Examples of zwitterions include amino acids, many metabolites, peptides, and proteins.
Explanation:
How would an increased level of acetyl-CoA be expected to affect the pyruvate dehydrogenase reaction
Answer:
The pyruvate dehydrogenase kinase enzyme activity would increase, resulting in an inhibition of pyruvate dehydrogenase activity. ... An in vitro study shows that isocitrate dehydrogenase is activated in the citrate cycle.
Explanation:
Determine the excluded volume per mole and the volume actually occupied by a mole for a gas consisting of molecules with radius 167 pm. [Note: To obtain the volume in liters, we must express the radius in decimeters (dm).] Enter your answers in scientific notation.
Answer:
Explanation:
Volume of one mole of a gas = 22.4 litre.
No of molecules in one mole of gas = 6.02 x 10²³ .
Volume of one molecule = 4/3 π R³
= 4/3 x 3.14 x ( 167 x 10⁻¹² m )³
= 19.5 x 10⁶ x 10⁻³⁶ m³
=19.5 x 10⁻³⁰ m³
= 19.5 x 10⁻³⁰ x 10³ litre .
= 19.5 x 10⁻²⁷ litre .
So volume occupied by molecules in one mole of gas
= 19.5 x 10⁻²⁷ x 6.02 x 10²³ litre
117.4 x 10⁻⁴ litre
= .01174 litre.
Excluded volume
= ( 22.4 - .01174 ) litre .
= 22.388 litre.
As electrons are passed down the electron transport chain, the molecules are first ______ as they pick up electrons, and then ______ as they release the electrons.
Answer:
reduced; oxidized
Explanation:
An electron transport chain can be defined as a series of redox reactions (electron transporters or proton complexes) that are saddled with the responsibility of transferring electrons from electron donors to electron acceptors through a membrane in order to produce a protein gradient that creates energy or adenosine triphosphate (ATP).
Generally, as these electrons are transferred through the electron transport chain, the molecules are first reduced as they pick up electrons, and then oxidized as they release the electrons.
Cellular respiration can be defined as a series of metabolic reactions that typically occur in cells so as to produce energy in the form of adenosine triphosphate (ATP). During cellular respiration, high energy intermediates are created that can then be oxidized to make adenosine triphosphate (ATP). Therefore, the intermediary products are produced at the glycolysis and citric acid cycle stage.
Additionally, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.
A television wave has a_____
wavelength than an infrared wave
Answer:
Longer
Explanation:
:)
Cuando aumenta la temperatura dentro de un recipiente cerrado que contiene un gas este se expande/comprime por que las partículas la forman se alejan/acercan
Tachar lo que no corresponda
Answer:
expande
forman se alejan
Explanation:
Según las leyes de los gases ideales;
La ley de Charles establece que el volumen de una masa dada de gas ideal es directamente proporcional a su temperatura a la presión simultánea.
Esto significa que cuando se calienta una masa dada de gas ideal, el gas se expande y las moléculas de gas se alejan unas de otras de acuerdo con la ley de Charles.
If a man reach a 25 km distance in 30 min in his car , find the average velocity
Answer:
Average velocity of car = 50 km/h
Explanation:
Given information;
Distance cover by man in his car = 25 kilometer
Time taken by man to cover distance = 30 min
Find:
Average velocity of car
Computation:
Time taken by man to cover distance = 30 min
Time taken by man to cover distance = 30 / 60
Time taken by man to cover distance = 0.5 hour
Average velocity = Distance / Time
Average velocity of car = Distance cover by man in his car / Time taken by man to cover distance
Average velocity of car = 25 / 0.5
Average velocity of car = 50 km/h
For a reaction, AH = 176 kJ/mol and A SO = 0.285 kJ/(K•mol). At what
temperatures is this reaction spontaneous?
A. At no temperature
B. T< 50 K
C. T>617 K
D. T< 617 K
Answer:
C. T>617 K
Explanation:
We are given that
[tex]\Delta H=176KJ/mol[/tex]
[tex]\Delta S=0.285KJ/K\cdot mol[/tex]
We have to find the temperature at which the reaction is spontaneous.
When
[tex]\Delta H>0, \Delta S>0[/tex]
Therefore, the reaction is spontaneous at certain range of temperature.
Option A is not true.
[tex]\Delta G=\Delta H-T\Delta S[/tex]
When [tex]\Delta G[/tex] is negative, then the reaction is spontaneous.
[tex]\Delta G=176-0.285T[/tex]
When T<50
Suppose T=49 K
[tex]\Delta G=176-49\times 0.285>0[/tex]
Therefore, [tex]\Delta G is positive[/tex].Hence, the reaction is not spontaneous.
Option B is wrong.
C.T>617K
Suppose T=618 K
[tex]\Delta G=176-0.285\times 618=-0.13<0[/tex]
Therefore, [tex]\Delta G is negative[/tex].Hence, the reaction is spontaneous.
So, option C is true.
D.T<617 K
Suppose T=616 K
[tex]\Delta G=176-0.285\times 616=0.44>0[/tex]
Therefore, [tex]\Delta G is positive[/tex].Hence, the reaction is not spontaneous.
So, option D is not true.
Una muestra de S2 (g) se coloca en un recipiente rígido vacío a 800 K y ésta ejerce una presión inicial de 0,92 atm, luego se combina para formar S8 (g) mediante la reacción: S2 (g) ⇆ S8 (g) Una vez alcanzado el equilibrio, la presión parcial de S2 (g) ha disminuido a 0,18 atm. Calcule Kp para la reacción a esta temperatura
Answer:g
Explanation:
The work function of an element is the energy required to remove an electron from the surface of the solid. The work function for palladium is 503.7 kJ/mol (that is, it takes 503.7 kJ of energy to remove 1 mole of electrons from 1 mole of Pd atoms on the surface of Pd metal). What is the maximum wavelength of light that can remove an electron from an atom in palladium metal
Answer:
λ = 2.38 × 10^(-7) m
Explanation:
We are given the work function for palladium as 503.7 kJ/mol.
Now let's convert this to KJ/electron.
We know from avogadro's number that;
1 mole of electron = 6.022 × 10^(23) electrons
Thus,
503.7 kJ/mol = 503.7 × 1/(6.022 × 10^(23)) = 8.364 × 10^(-22) KJ/electron = 8.364 × 10^(-19) J/electron
Formula for energy of a photon is;
E = hv
Where;
h is Planck's constant = 6.626 × 10^(-34) J.s
v is velocity
Now, v = c/λ
Where;
c is speed of light = 3 × 10^(8) m/s
λ is wavelength of light.
Thus;
E = hc/λ
Making λ the subject, we have;
λ = hc/E
λ = (6.626 × 10^(-34) × 3 × 10^(8))/(8.364 × 10^(-19))
λ = 2.38 × 10^(-7) m
A mechanical wave starts when matter is disturbed by a source
of_______ I NEED ANSWER ASAP
Answer:
i believe energy is your answer here
Solubility of which salts does not dependent on temperature.Any three.
Answer:
any salt
sodium chloride
callcium chloride
potassium chloride
Explanation:
There is no general effect of temperature on the solubility of salts.effect of increase temperature on the solubilty of NaCl is not significant because it is more soluble even at low temperature. The salt like potassium iodide (KI) has negative heat of solution so it's solubility decreases with increase of temperature…
Which refers to substances that are complex molecules and contain carbon atoms bonded to hydrogen atoms?
o
O organic
O inorganic
ionic
metallic
Answer:
organic
Explanation:
Organic substances are those which contains covalently linked carbon to hydrogen (C-H) bonds in their structure. In other words, organic compounds or substances are uniquely composed of carbon and hydrogen atoms covalently linked together.
These substances usually contain a long chain of these bonds, hence, making them complex. Therefore, according to this question, substanves that are complex molecules and contain carbon atoms bonded to hydrogen atoms are referred to as ORGANIC SUBSTANCES.
Answer:
A. Organic
Explanation:
1. All of the following statements are true
regarding spontaneous process, EXCEPT:
A. It occurs without requiring an outside
force.
B. It can be a physical or chemical change
C. It will continue until equilibrium is
reached.
D. It will suddenly stop once products ar
formed.
Which of the following is an example of a
spontaneous process?
A. Melting of ice in room temperature
B. Transfer of heat from a cold objectt
hot object
C. Removing rust on an iron nail
D. Separation of hydrogen and oxygen
atoms via electrolysis
Answer:
ïgGshdhdhdhdhdbdhdhdjddk
What mass of N2O5 will result from the reaction of 6.0 mol of NO2 if there is a 61.1% yield in the reaction
Answer:
2.0 × 10² g
Explanation:
Step 1: Write the balanced equation
2 NO₂ + 0.5 O₂ ⇒ N₂O₅
Step 2: Calculate the theoretical yield, in moles, of N₂O₅
The molar ratio of NO₂ to N₂O₅ is 2:1.
6.0 mol NO₂ × 1 mol N₂O₅/2 mol NO₂ = 3.0 mol N₂O₅
Step 3: Calculate the theoretical yield, in grams, of N₂O₅
The molar mass of N₂O₅ is 108.01 g/mol.
3.0 mol × 108.01 g/mol = 3.2 × 10² g
Step 4: Calculate the real yield, in grams, of N₂O₅
real yield = theoretical yield × percent yield
real yield = 3.2 × 10² g × 61.1% = 2.0 × 10² g
Which of the following statements regarding the movement of electrons during cellular respiration is true?
A. Electrons tend to move away from O2.
B. O2 is reduced when it accepts electrons and forms water.
C. The electrons release large amounts of energy each time they are transferred from one molecule to another.
D. O2 is eventually oxidized by the electrons to form water.
Answer:
B. O2 is reduced when it accepts electrons and forms water.
Explanation:
During cellular respiration water is formed when oxygen receives electrons and picks up protons at the conclusion of the electron transport chain. The electron transport chain will stop functioning if there isn't enough oxygen to receive electrons (for example, because a person isn't breathing in enough oxygen), and ATP will no longer be created by chemiosmosis. Cells can't carry out the reactions they need to function if they don't even have enough ATP, and they may perish after a long period of time.
Why are measurements important for science?
Give two reasons.
Please help meeee :(
Answer:
-Being in the service of quality, safety, designing and problem solving.
-It plays an importnat part in our lives too, to measure any surface, object, etc.
Explanation:
Measurement is perhaps one of the most fundamental concepts in science. Without the ability to measure, it would be difficult for scientists to conduct experiments or form theories.
. Which substance corrodes steel wool the most?
A. salt
B. acid
C. base
D. tap water
Answer:
A. Salt, hope its helped
Mike watch 100 m north then watch 30 m south after this he walks another 10 m north what is the magnitude of his total displacement during this walk in meters
Answer:
His total displacement is 80 m northwards
Explanation:
Given;
Mike's first displacement, x₁ = 100 m North
Mike's second displacement, x₂ = 30 m South
Mike's third displacement, x₃ = 10 m North
Let his Northwards direction be positive, and
his Southwards direction be negative
His total displacement = (100 m North) + ( - 30 m South) + (10 m north)
= (100 m + 10m - 30 m)
= 80 m Northwards
write a short note on detection of nitrogen in the organic compound
ajdhrhahdjdjdndoxhdebdixhxb dbds ebenej
What is the mass of NaCl required to make 140 grams of a 12% solution of NaCl in water?
12 grams
14 grams
17 grams
18 grams
Answer: The mass of NaCl required to make 140 grams of a 12% solution of NaCl in water is 17 g.
Explanation:
Given: Mass of solution = 140 g
Mass percent = 12%
Formula used to calculate grams of solute are as follows.
[tex]Grams of solute = \frac{grams of solution \times mass percent}{100 percent}[/tex]
Substitute the values into above formula as follows.
[tex]Grams of solute = \frac{grams of solution \times mass percent}{100 percent}\\= \frac{140 g \times 12 percent}{100 percent}\\= 16.8 g\\= 17 g[/tex]
Thus, we can conclude that the mass of NaCl required to make 140 grams of a 12% solution of NaCl in water is 17 g.
Considering the definition of percentage by mass, the correct answer is the third option: 17 grams of NaCl is required to make 140 grams of a 12% solution of NaCl in water.
The Percentage Composition is a measure of the amount of mass that an element occupies in a compound and indicates the percentage by mass of each element that is part of a compound.
This is, the percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.
In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]
In this case, you know:
percentage by mass= 12%mass of solute= ?mass of solution= 140 gramsReplacing:
[tex]12=\frac{mass of solute}{140 grams}x100[/tex]
Solving:
mass of solute= [tex]\frac{12 x 140 grams}{100}[/tex]
mass of solute= 16.8 grams ≅ 17 grams
Finally, the correct answer is the third option: 17 grams of NaCl is required to make 140 grams of a 12% solution of NaCl in water.
Learn more about percentage by mass:
brainly.com/question/19168984?referrer=searchResults
brainly.com/question/18646836?referrer=searchResults
brainly.com/question/24201923?referrer=searchResults
brainly.com/question/9779410?referrer=searchResults
brainly.com/question/17030163?referrer=searchResults
A student makes several observations about a piece of iron. Which observation describes a chemical property of the iron?
Answer:
An example of a chemical property of iron would be that it is capable of combining with oxygen to form iron oxide, or rust.
Explanation:
You have no choice listed, so I provided an example.
How many moles of sodium carbonate in 18.06x10 to the power 22
Answer:
[tex] moles = \frac{ number \: of \: particles}{6.02 \times {10}^{23} } [/tex]
=1.806×10^22/6.02×10^23
=0.03 moles
hope this helps :)
Balance the following equation :
Sodium + water sodium hydroxide + hydrogen with steps
Answer:
2Na + 2H2O → 2NaOH + H2
Explanation:
This is the balanced equation of,
Sodium + water → sodium hydroxide + hydrogen
A gas is put into a cosed container.
The container and the gas inside it are heated.
What will happen to the pressure inside the container?
Answer:
When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.
(Please help)
What is the most common isotope for element X
Answer:
Isotope 2
Explanation:
Isotope 2 is the most abundant. Its percent abundance is 78.68% which is the largest percentage, and therefore the most common of the isotopes presented.
Good luck!
