Select the item that best represents technology transfer?
Newtonian telescope
Magnetic Compass
Printing Press
Answer:
Printing Press
Explanation:
Technology transfer is the simple process of sharing or dissemination of information from person to person (or from one organisation to another)
Therefore, the item that best represents technology transfer from the given answer choices is the printing press.
This is because, the printing press helped to print paper containing information which was sent from one location to another.
write chracteristics of all 5 generation of computer
Answer:
First generation — 1940–1956
-used vacuum tubes
ENIAC, UNIVAC I, IBM 650, IBM 701 etc.
mainframes taking up entire rooms
punched cards I/O
electrostatic and mercury delay line memory, beginning use of core
Second generation — 1956-1963
-used discrete transistors
IBM 7090 and 7094, UNIVAC 1107, PDP-1 and 8, etc.
first appearance of minicomputer (PDP-8)
punched cards I/O and line printers (mainframe), TTY (minicomputers)
core memory, magnetic tape for mass storage
Third generation — 1964-1971
-used integrated circuits
IBM System/360, UNIVAC 1108, PDP-8/I, PDP-11/20 and PDP-11/45, etc.
mostly same I/O and memory as second generation
Fourth generation — 1971-present
-use microprocessors
PDP-11/03 and PDP-11/34, Apple ][, IBM PC, Apple Macintosh, IBM z Series, etc.
transition from minicomputers to personal computers
video terminals used for I/O, specialty computer printers developed
fewer mainframes
semiconductor memory replaces core memory
hard drives and optical drives replace magnetic tape for mass storage, followed by solid-state drives (SSD)
Fifth generation — (current research)
-artificial intelligence and quantum computing
Answer:
The five generations of computer are characterized by electrical current flowing through the processing mechanisms listed below : The first within vacuum tubes The second within transistors The third within integrated circuits The fourth within microprocessors clips The fifth unveiled smart devices capable of artificial...
Explanation:
☆hope it is helpful to you ☆
☆MiraculousNisha^_^Since the rules cannot address all circumstances, the Code includes a conceptual framework approach for members to use to evaluate threats to compliance. Using this framework, Group of answer choices the first step is to discuss the threat with the client's management team. safeguards can be used to eliminate any threat. all threats must be completely eliminated. more than one safeguard may be necessary.
Answer:
more than one safeguard may be necessary.
Explanation:
The conceptual framework can be used to developed as well as construct through a process of the qualitative analysis. The approach includes the in the frameworks for identifying and evaluating the threats to compliance with the rules.
But since the rules formed cannot always address all the circumstances, the Code includes to evaluate the threats to the compliance of more than one safeguards that are necessary.
write a short note about applications of computer
Answer:
Computer is very effective machine which can be used for teaching, learning, online bill payment, watching TV, home tutoring, social media access , playing games, internet access, etc. It also provides us to communicate with our friends and relatives although, they are in corner of world......
write difference between dvd r and dvd ram( Any 3 points or any a little big paraph for test)
Answer:
Following are the differences two the given questions:
Explanation:
DVD-R:
DVD-R is a common DVD recordable media that seems like a conventional DVD, and it can only be used once for writing data or analyzing information many times.It is identical to a regular DVD, however, it can be used to record data like a CD-R. Once a DVD-R is "burned," it cannot be read to anymore.There is a 650 nm range recording, nicknamed "Authoring DVD-R." "DVD-R for general" is another format with protection against duplicating, which records at 635 nm. Whilst DVD-R(a) and DVD-R(g) may read forms of one another, they cannot write formats of each other.DVD-RAM:
This is a technology for optical DVD storage where the information may be read, deleted & written constantly.It offers outstanding integrity of data, preservation, and avoidance of damages that can be used for basic storing data, data preservation, or data backup.Those disc drives can indeed be frequently recorded and deleted, and only compatible with DVD-RAM format devices produced by corporations.Joe a frequent visitor to a branch office attempts to connect his tablet to the office wireless network but is unable to connect to the internet even though he has verified that the SSID and password are correct. Joe attempts to connect to a coworkers hotspot but is still unable to connect to the internet.What is the cause of the issue?
Answer:
Airplane mode has been set on the tablet.
Explanation:
Joe a frequent visitor to a branch office attempts to connect his tablet to the office wireless network but is unable to connect to the internet even though he has verified that the SSID and password are correct. Joe attempts to connect to a coworker's hotspot but is still unable to connect to the internet.
This is because the Airplane mode has been set on the tablet.
Which option is used to insert a table in PowerPoint from another Office application?
In the Insert Object dialog box, choose Create from file.
In the Design tab, choose the Table Styles option.
In the Insert Table dialog box, choose Insert Table.
In the Layout tab, choose the Merge option.
Answer: In the Insert Object dialog box, choose Create from file.
Explanation:
To insert a table into PowerPoint from another Office application, go to the Insert Tab. In the Text ribbon on the far right, you will see "Object" next to Equation.
After clicking on that, select the "Create from File" option. It will allow you to browse a file you want to import from. PowerPoint will import the data from this file.
BIOS has two jobs. One is to boot up, or start, the computer. What is the other? Maintain the computer’s software firewall. Ensure the fastest possible Internet speed. Provide the basic interface for the hardware. Perform regularly scheduled memory backups.
Answer:
Provide the basic interface for the hardware.
Explanation:
Chris needs to modify the default bullets that are used in a nonnumbered list in Word.
Which method should he use?
Select the arrow next to the bullet list option in the Paragraph group.
Select the arrow next to the number list option in the Paragraph group.
Use the Styles group on the Home tab.
This cannot be done.
Answer:
Select the arrow next to the bullet list option in the Paragraph group.
Explanation:
This allows you to decide what shape of bullets you would like to have.
Hope this helps!
Note: I personally recommend using stars :)
Audience centered public speakers are inherently sensitive to the
Answer:
the diversity of their audiences
Explanation:
You work for a retail clothing chain whose primary outlets are in shopping malls and are conducting an analysis of your customers and their preferences. You wish to find out if there are any particular activities that your customers engage in, or the types of purchases made in the month before or after purchasing select items from your store. To do this, you will want to use the data mining software you are using to do which of the following?
a. Identify clusters
b. Identify sequences
c. Classify data
d. Identify associations
Answer: Identifying sequences
Explanation:
Since the user wants to know if there are any particular activities that the customers engage in, or the types of purchases made in the month before or after purchasing select items from your store, therefore, the data mining software can be used in identifying sequences.
In this case, the data mining software can't be used in classifying data whether into structured or unstructured data. Furthermore, the identification of clusters and associations aren't the correct answers.
Therefore, the best option is B.
Helllllllllppppppppppp
Answer:
9
Explanation:
"++" at the beginning increases your "x" by 1 before using it.
if it placed after your variable, it will increase it after your program used it.
What is a compiler?
a tool used to integrate multiple software programs
a tool used to extract a single software program from an integrated collection of programs
a computer software application that translates binary computer machine language into a computer programming language
a computer software application that translates a computer programming language into a binary computer machine language
Answer:
A computer software application that translates a computer programming language into a binary computer machine language
Explanation:
ita in the answer
Answer:
c
Explanation:
im god
How many characters should a strong password have? four six eight ten
Answer:
I say it have to be aleast 8 to complete a strong password
Explanation:
it's common sense
Answer:
8
Explanation:
The more the better but ten too much
Select three physical forms of storage. USB drive Primary cache Magnetic storage Secondary cache Dynamic RAM Optical drive
Answer:USB drive
Magnetic storage
Optical drive
Explanation:
hope this helps
Question 1 of 30
Match each type of tax with an example of its use.
Consumption tax
?
10% on profits from the
sale of a house
Capital gains tax
6% tax on all sales
Excise tax
$5 tax on a cable
television line
Payroll tax
15% tax to pay for Social
Security
Capital gains tax - 10% profits from sale of the house
Consumption tax - 6% tax on all sales
Excise tax - 5$ tax on cable tv line
Payroll tax - 15% tax to pay for social security
Your knowledge of algorithms helps you obtain an exciting job with the Acme Computer Company, along with a $10,000 signing bonus. You decide to invest this money with the goal of maximizing your return at the end of 10 years. You decide to use the Amalgamated Investment Company to manage your investments. Amalgamated Investments requires you to observe the following rules. It offers n different investments, numbered 1 through n. In each year j , investment i provides a return rate of rij . In other words, if you invest d dollars in investment i in year j , then at the end of year j, you have drij dollars. The return rates are guaranteed, that is, you are given all the return rates for the next 10 years for each investment. You make investment decisions only once per year. At the end of each year, you can leave the money made in the previous year in the same investments, or you can shift money to other investments, by either shifting money between existing investments or moving money to a new investement. If you do not move your money between two consecutive years, you pay a fee of f1 dollars, whereas if you switch your money, you pay a fee of f2 dollars, where f2 > f1.
a) The problem, as stated, allows you to invest your money in multiple investments in each year. Prove that there exists an optimal investment strategy that, in each year, puts all the money into a single investment. (Recall that an optimal investment strategy maximizes the amount of money after 10 years and is not concerned with any other objectives, such as minimizing risk.)
b) Prove that the problem of planning your optimal investment strategy exhibits optimal substructure.
c) Design an algorithm that plans your optimal investment strategy. What is the running time of your algorithm?
d) Suppose that Amalgamated Investments imposed the additional restriction that, at any point, you can have no more than $15,000 in any one investment. Show that the problem of maximizing your income at the end of 10 years no longer exhibits optimal substructure.
Answer:
C
Explanation:
Write a program num2rome.cpp that converts a positive integer into the Roman number system. The Roman number system has digits I 1 V 5 X 10 L 50 C 100 D 500 M 1,000 Numbers are formed according to the following rules: a. Only numbers 1 to 3,999 (inclusive) are represented. b. As in the decimal system, the thousands, hundreds, tens, and ones are express separately. c. The numbers 1 to 9 are expressed as I 1 II 2 III 3 IV 4 V 5 VI 6 VII 7 VIII 8 IX 9 As
Answer:
Explanation:
#include <stdio.h>
int main(void)
{
int num, rem;
printf("Enter a number: ");
scanf("%d", &num);
printf("Roman numerals: ");
while(num != 0)
{
if (num >= 1000) // 1000 - m
{
printf("m");
num -= 1000;
}
else if (num >= 900) // 900 - cm
{
printf("cm");
num -= 900;
}
else if (num >= 500) // 500 - d
{
printf("d");
num -= 500;
}
else if (num >= 400) // 400 - cd
{
printf("cd");
num -= 400;
}
else if (num >= 100) // 100 - c
{
printf("c");
num -= 100;
}
else if (num >= 90) // 90 - xc
{
printf("xc");
num -= 90;
}
else if (num >= 50) // 50 - l
{
printf("l");
num -= 50;
}
else if (num >= 40) // 40 - xl
{
printf("xl");
num -= 40;
}
else if (num >= 10) // 10 - x
{
printf("x");
num -= 10;
}
else if (num >= 9) // 9 - ix
{
printf("ix");
num -= 9;
}
else if (num >= 5) // 5 - v
{
printf("v");
num -= 5;
}
else if (num >= 4) // 4 - iv
{
printf("iv");
num -= 4;
}
else if (num >= 1) // 1 - i
{
printf("i");
num -= 1;
}
}
return 0;
}
list three social implications of the wider range of piracy
Answer:
Street prices are affected by the extent of illegal commercial copying. The availability of inexpensive, high-quality illegal copies reduces the demand for legal copies to the extent that some users buy illegal copies instead of legal ones.
What is binary number system? Why is it used in computer system?
Answer:
Computers depend mainly on binary because it’s more time efficient for them to so.
Explanation:
It’s easier to identify 0 as “off” and 1 as “on”. As you may know, transistors are the fundamental blocks of microprocessors and ICs. The reasons this is the case is that these transistors form logic gates which can carry out basic logic operations. These logic gates are a huge step into making microprocessors/ICs/etc. And what do these logic gates depend on? They depend on binary.
Whoa whoa, wait a minute. Let’s first take a step back to know a thing or two about logic gates.
These logic gate can be constructed from transistors. They carry basic logic operations. You have one or more inputs “entering” the logic gate ——-> A certain operation is performed on them ——-> you get your output. The input is a voltage. This voltage it can be interpreted as an “on” or “off” according to the gate. Once again these offs and ons are 0s and 1s. For example the Inverter/NOT gate is a gate that simply takes an input and gives its inverse. For example:-
A low voltage/an “off” signal/ a “0” “enters” the NOT gate. ——-> A high voltage/an “on” signal/ a “1” is the result of the operation performed
(In the above example low voltage = “off” signal = 0, high voltage = “on” signal = 1)
As you can see, a 0 enters the NOT gate and a 1 comes out or vice versa. Now, if you were a logic gate, you’d prefer working with just 0s and 1s right? I would. This would be much easier to work with than a lot of different values.
It’s a herculean task to work with these though as a human. And fortunately, programming languages exist for giving the computer instructions to do in a “language” other than its own.
Which of the following statements about RAID is correct? Group of answer choices All RAID configurations provide fault tolerance for up to one disk failure A RAID 1 configuration of 4 disks has higher storage capacity than a RAID 0 configuration RAID 5 allows up to two disk failures During a RAID 5 disk failure, read performance is not impacted A RAID 1 configuration of four 1TB disks has a storage capacity of 2TB
Answer:
A RAID 1 configuration of 4 disks has higher storage capacity than a RAID 0 configuration
Explanation:
Redundant Array of Independent Disks(RAID) are multiple physical drives arranged in logical units to provide data redundancy and increased performance. They are
RAID 1 configuration duplicates data storage, albeit of lower performance than RAID 0. Also called disk mirroring because it mirrors data on two or more disks, it provides at least two drives that are used interchangeably or together.
A RAID 1 is the configuration of the 4 disks that has higher storage capacity than a RAID 0 configuration. This option A is correct.
What is the RAID ?The RAID is a redundant array of the inexpensive disks and refers to the storage visualization technology that combines multiple physical disk drives. Its contract with earlies highly reliable mainframe disk drives.
The RAID one needs mini of two physical drives as the data is given simultaneously in two places. These drives are mirror images as ne fails the other can take over.
Find out more information about the RAID.
brainly.com/question/26980060.
i was able to solve the question :))
Answer:
ill take the points anyway
Explanation:
What is a status update?
A. An automatic enhancement to a computer's performance
B. Any new software that can be downloaded for free
C. A short post in which users write what they are doing
D. A news flash that announces new government posts
how to convert binary number into decimal number
Answer:
Multiplying by 2
Explanation:
The binary num number to decimal conversion is made by making the sum of each binary digits multiplying by 2 with raised to the power of the positional notation of digits .
Hope it is helpful to you
Answer:
HOW TO CONVERT BINARY INTO DECIMAL SYSTEM.
The decimal number is equal to the sum of binary digits (dn) times their power of 2 (2n):
decimal = d0×20 + d1×21 + d2×22 + ...
Example #1.SEE,
Find the decimal value of 1110012:
binary number: 1 1 1 0 0 1
power of 2: 25 24 23 22 21 20
1110012 = 1⋅25+1⋅24+1⋅23+0⋅22+0⋅21+1⋅20 = 5710
Explanation:
YOU WILL LEARN MORE IN HIGHER CLASSES.
The most likely reason a firm would decide to establish an extranet would be the desire to Multiple Choice speed the flow of information on its private network by increasing the bandwidth. make the information on its network widely available to the general public. share information and collaborate with a select group of outside organizations or individuals. overcome the speed and capacity limitations of its external connection to the Internet by gaining access to the very-high-speed Backbone Network Service.
Answer: share information and collaborate with a select group of outside organizations or individuals.
Explanation:
When a company uses an intranet, it is for the purpose of sharing information within the company so in the same vein, an extranet is done to share information with entities outside the company be it people or organizations.
For information to be shared, the other companies and organizations need to have the means and authorization to join the extranet. Extranets are very useful as they enable collaboration across vast distances thereby increasing productivity.
The most likely reason a firm would decide to establish an extranet is B. share information and collaborate with a select group of outside organizations or individuals.
An extranet simply means a controlled private network that allows customers, vendors, partners, suppliers, etc to gain information about a company.
Extranet is vital to share information and collaborate with a select group of outside organizations or individuals. It is usually a private part of a website.
Read related link on:
https://brainly.com/question/10156285
Hoda needs to create a chart that is associated with an Excel spreadsheet. She needs to ensure that if the data in the spreadsheet changes, the chart in her presentation will be updated. Which option must she choose?
Embed the chart.
Link the chart.
Insert the chart as a picture.
This cannot be done.
Answer:
the awnser is B
Explanation:
Answer:
B, Link the chart.
Explanation:
write a note on antispyware progrmaes?
Answer: See explanation
Explanation:
Spyware refers to the software that has
a malicious behavior which gathers information about an individual or organization and then sends the information gathered to another entity which is used in causing harms to the user such as the privacy violation of the user.
Antispyware programmes are also called the spyware removal tools and they're the software which are used in the detection of harmful spyware which are then removed from the system. Examples include Avira, Norton, Avast, McAfee etc.
Answer:
Anti-spyware software is a type of program designed to prevent and detect unwanted spyware program installations and to remove those programs if installed. Detection may be either rules-based or based on downloaded definition files that identify currently active spyware programs.
A driver that approaches a controlled intersection with a signal that is not working must:
Which unit of computer is used to processed data?
Please help!!!!!!
[tex]Hello[/tex] [tex]There![/tex]
[tex]AnimeVines[/tex] [tex]is[/tex] [tex]here![/tex]
Is it Central Processing Unit?
[tex]HopeThisHelps!![/tex]
[tex]AnimeVines[/tex]
Answer:
Central Processing Unit (CPU)
Explanation:
The Central Processing Unit (aka CPU), is used to process the data.
1. Read the following scenario. What type of business letter do you think is required in this situation? (1 point)
Melissa and Melrose are both first-year students at a local community college. They both have interest in volunteering with a nonprofit organization. They decided to reach out to nonprofit organizations to ask about the steps they need to take in order to volunteer.
Answer:
It requires a formal letter.
Answer:
This would require a formal business letter, the type being a cover letter or inquiry.
Explanation: yes
