Find the refractive index of a medium
having a velocity of 1.5 x 10^8*

Explanation:

Given:

L = 0.02 H

C = [tex]2\:\mu \text{F}[/tex]

f = 200 Hz

The general form of the impedance Z is given by

[tex]Z = \sqrt{R^2 + (X_L - X_C)^2}[/tex]

Since this is a purely inductive/capacitive circuit, R = 0 so Z reduces to

[tex]Z = \sqrt{(X_L - X_C)^2} = \sqrt{\left(\omega L - \dfrac{1}{\omega C} \right)^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{\left(2 \pi L - \dfrac{1}{2 \pi f C} \right)^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{\left[2 \pi (200\:\text{Hz})(0.02\:\text{H}) - \dfrac{1}{2 \pi (200\:\text{Hz})(2×10^{-6}\:\text{F})} \right]^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{(25.13\:\text{ohms} - 397.89\:\text{ohms})^2}[/tex]

[tex]\:\:\:\:\:\:\:=372.66\:\text{ohms}[/tex]

Answer:

b)

Explanation:

GCMs (general circulation models) are useful instruments for gaining a quantitative knowledge of climate processes. Physical processes in the atmosphere, cryosphere, and land surface are represented by them. They are used for modeling the global climate system's reaction to rising greenhouse gas concentrations available at the moment by utilizing spectral models based on the energy emitted by the biosphere and clouds.

Explanation:

First, we convert the energy from eV to Joules:

[tex]2.90\:\text{eV}×\left(\dfrac{1.6×10{-19}\:J}{1\:\text{eV}} \right)[/tex]

[tex]= 4.64×10^{-19}\:\text{eV}[/tex]

We know from definition that

[tex]E=h\nu = \dfrac{hc}{\lambda}[/tex]

so the wavelength of the photon is

[tex]\lambda = \dfrac{hc}{E} = 4.28×10^8\:\text{m}[/tex]

Answer:

the SI unit (meter per second square) indicates a linear type of motion.

Explanation:

Given;

acceleration of the car, a = 5.2 m/s² North

the SI unit of the car, = m/s²

The SI unit of the given value (acceleration), indicates a linear type of motion.

Linear acceleration is the change in linear velocity with time. Also, the northwards direction indicates linear displacement of the car.

Therefore, the SI unit (meter per second square) indicates a linear type of motion.

Answer:

displacement

Explanation:

Answer:

The phases of the cardiac action potential correspond to the surface ECG (ECG) (Figure). The P wave reflects atrial depolarization (phase 0), the PR interval reflects the conduction velocity through the AV node, the QRS complex the ventricular depolarization and QT interval the duration potential ventricular action.

Answer:

Pressure is more in the open container than the closed one.

Explanation:

The pressure due to the fluid at a depth is given by

Pressure = depth x density of fluid x gravity

So, when the container is open, the atmospheric pressure is also add  up but when  the container is closed only the pressure due to the fluid is there.

So, when the container is open, the pressure is atmospheric pressure + pressure due to the fluid.

hen the container is closed only the pressure due to the fluid is there.

Answer:

B . energy cannot be created or destroyed

Answer:

The pulse speed depends on the properties of the medium and not on the amplitude or pulse length of the pulse.

Explanation:

Hope this helps.

Answer:

Acceleration

Explanation:

The fact that new can go from zero to 60mph in 8 secs is a description of its pick-up or in physics,  it's called acceleration.

Here initial velocity u= 0

final velocity v = 60 mph = 1m/minute.

or v =1609.344/60 = 26.82m/s

and time taken to do so is 8 sec

Acceleration a = (v-u)/t

a = (26.82-0)/8 = 3.35 m/s^2

Therefore, acceleration of the car a = 3.35 m/s^2.

Answer:The SI system is based on the number 10 as well as multiples and products of 10. This makes it much easier to use, and so it has been the accepted system in scientific and technical applications. The English system is more complicated as relationships between units of the same quantity aren't uniform.

Explanation:

Answer:

The metric system is an internationally agreed decimal system of measurement while The International System of Units (SI) is the official system of measurement in almost every country in the world

Answer:

frequency

Explanation:

The phenomenon of apparent change in frequency due to the relation motion between the source and the observer is called Doppler's effect.

So, when we move farther, the frequency of sound decreases. The formula of the Doppler's effect is  

[tex]f' = \frac{v + v_o}{v+ v_s} f[/tex]

where, v is the velocity of sound, vs is the velocity of source and vo is the velocity of observer, f is the true frequency. f' is the apparent frequency.

Answer:

The acceleration of the payload is 26 m/s2.

Explanation:

length, L = 65 cm =  0.65 m

angular acceleration = 40 rad/s^2

The acceleration is given by

a = angular acceleration x length

a = 40 x 0.65

a = 26 m/s^2

Answer:

[tex]K.E_{max}=0.8973J[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=1.64kg[/tex]

Equation of Mass

[tex]X=0.33cos(3.17t)[/tex]...1

Generally equation for distance X is

[tex]X=Acos(\omega t)[/tex]...2

Therefore comparing equation

Angular Velocity [tex]\omega=3.17rad/s[/tex]

Amplitude A=0.33

Generally the equation for Max speed is mathematically given by

[tex]V_{max}=A\omega[/tex]

[tex]V_{max}=0.33*3.17[/tex]

[tex]V_{max}=1.0461m/s[/tex]

Therefore

[tex]K.E_{max}=0.5mv^2[/tex]

[tex]K.E_{max}=0.5*1.64*(1.0461)^2[/tex]

[tex]K.E_{max}=0.8973J[/tex]

Answer:

towards the center

Explanation:

that is the solution above

Answer:

a. 8p

Explanation:

We are given that

Radius of hollow sphere , R1=R

Density of hollow sphere=[tex]\rho[/tex]

After compress

Radius of hollow sphere, R2=R/2

We have to find density of the compressed sphere.

We know that

[tex]Density=\frac{mass}{volume}[/tex]

[tex]Mass=Density\times volume=Constant[/tex]

Therefore,[tex]\rho_1 V_1=\rho_2V_2[/tex]

Volume of sphere=[tex]\frac{4}{3}\pi r^3[/tex]

Using the formula

[tex]\rho\times \frac{4}{3}\pi R^3=\rho_2\times \frac{4}{3}\pi (R/2)^3[/tex]

[tex]\rho R^3=\rho_2\times \frac{R^3}{8}[/tex]

[tex]\rho_2=8\rho[/tex]

Hence, the density of  the compressed sphere=[tex]8\rho[/tex]

Option a is correct.

Answer:

Greater.

Explanation:

This pressure difference will be greater if the scuba diver were in seawater and went to the same depth because the seawater have salts which increases the density of water as compared to freshwater. Salt in water increases the density which automatically increases the pressure on the diver so that's why we can say that the pressure will be increases for the scuba diver in seawater as compared to freshwater.

Answer:

W/7

Explanation:

By principle of moments,

Sum of clockwise moment = sum of anticlockwise moment

Weight × 7d = W × d

Weight = W/7

Since the two children are in rotational equilibrium, the weight of the second child is W/7.

The weight of the second child can be determined from the principle of moments.

The principle of moments states that for a body in equilibrium, the sum of the clockwise moments and anticlockwise moments about a point is zero.

Let the weight of the second child be X

From the principle of moments:

W × d = 7×d × X

X = W/7

Therefore, the weight of the second child is W/7.

Learn more about principle of moments at: https://brainly.com/question/20298772

Answer:

The exit velocity of water is  B. 15 m/s.

Explanation:

According to equation of continuity, for a steady flow of water, the volume of liquid entering a pipe in 1 second is equal to the volume that leaves per second.

If the initial exit area of the pipe is A₁ and the speed of exit is v₁ and the final exit area is A₂ and its corresponding exit velocity  is v₂, then,

Rewrite the expression for v₂.

Substitute 10 cm² for A₁, 2 cm² for A₂ and 3 m/s for v₁.

The exit speed of water from the hose is 15 m/s.

Solution :

Part A .

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, d = [tex]\text{4 km 29}[/tex] degree left of [tex]y[/tex]-axis.

So the [tex]x[/tex] component is = -4 x sin (29°) = -1.939 km

           [tex]y[/tex] component is = 4 x cos (29°) = 3.498 km

Part B

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, [tex]\text{v = 2 cm/s}[/tex] , [tex]\text{-x direction}[/tex]

So the [tex]x[/tex] component is = -2 cm/s

           [tex]y[/tex] component is = 0

Part C

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, [tex]\text{a = 13 m/s, 36 degree}[/tex] left of [tex]y[/tex]-axis.

So the [tex]x[/tex] component is = -13 x sin (36°) = -7.6412 [tex]m/S^2[/tex]

           [tex]y[/tex] component is = -13 x cos (36°) = -10.517 [tex]m/S^2[/tex]

The x- and y-components of the vectors  is mathematically given as as follows for each Part respectively

x= -1.939 km, y= 3.498 km

x= -2 cm/s, 0

y=, x= -7.6412m/s^2, -10.517m/s^2

What are the x- and y-components of the vectors?

Question Parameters:

Generally, we follow a basic principle where

x component= Fsin\theta

y component= Fcos\theta

Therefore

For A

x component is

x= -4 x sin (29°)

x= -1.939 km

 y component is

y= 4 x cos (29°)

y= 3.498 km

For B

x component is

x= -2 cm/s            

y component is

y= 0

For C

x component is

x= -13 x sin (36°)

x= -7.6412m/s^2      

y component is

y= -13 x cos (36°)

y= -10.517m/s^2  

Read more about Cartession co ordinate

https://brainly.com/question/9410676

Answer:

(I)

[tex]{ \bf{s = ut + \frac{1}{2}a {t}^{2} }} \\ 120 = (u \times 2) + \frac{1}{2} \times 0 \times {2}^{2} \\ 120 = 2u \\ { \tt{speed = 60 \: {ms}^{ - 1} }}[/tex]

(ii)

[tex]{ \bf{s = ut + \frac{1}{2}a {t}^{2} }} \\ 240 = (60t) \\ { \tt{time = 4 \: seconds}}[/tex]

Answer:

A. TA = TB/2.

Explanation:

Since container A has half as many molecules of the ideal gas in it as container B. Therefore, container A will have half the volume of gas as in container B:

[tex]V_A = \frac{1}{2}V_B[/tex]

Now, from Charle's Law:

[tex]\frac{V_A}{T_A}=\frac{V_B}{T_B}\\\\\frac{1}{2}\frac{V_B}{T_A}=\frac{V_B}{T_B}\\\\T_A = \frac{T_B}{2}[/tex]

Hence, the correct option is:

A. TA = TB/2.

Answer:

7.8% of the original volume.

Explanation:

From the given information:

Temperature [tex]T_1[/tex] = 22° C = 273 + 22 = 295° C

Pressure [tex]P_1[/tex] = 240 kPa

Temperature [tex]T_2[/tex] = 45° C

At initial temperature and pressure:

Using the ideal gas equation:

[tex]P_1V_1 =nRT_1[/tex]

making V_1 (initial volume) the subject:

[tex]V_1 = \dfrac{nRT_1}{P_1}[/tex]

[tex]V_1 = \dfrac{nR*295}{240}[/tex]

Provided the pressure maintained its rate at 240 kPa, when the temperature reached 45° C, then:

the final volume [tex]V_2[/tex] can be computed as:

[tex]V_2 = \dfrac{nR*318}{240}[/tex]

Now, the change in the volume ΔV =  V₂ - V₁

[tex]\Delta V = \dfrac{nR*318}{240}- \dfrac{nR*295}{240}[/tex]

[tex]\Delta V = \dfrac{23nR}{240}[/tex]

∴

The required fraction of the volume of air to keep up the pressure at (240) kPa can be computed as:

[tex]= \dfrac{\dfrac{23nR}{240}}{ \dfrac{295nR}{240}}[/tex]

[tex]= {\dfrac{23nR}{240}} \times { \dfrac{240}{295nR}}[/tex]

[tex]= 0.078[/tex]

= 7.8% of the original volume.

Explanation:

Given

Acceleration of the pebble is

At t=0, velocity is

considering horizontal motion

[tex]\Rightarrow x=ut+0.5at^2 \\\Rightarrow 11=4.3t+0.5(4.6)t^2\\\Rightarrow 2.3t^2+4.3t-11=0\\\Rightarrow (t-1.4435)(t+3.3131)=0\\\Rightarrow t=1.44\ s\quad [\text{Neglecting negative time}]\\[/tex]

Velocity acquired during this time

[tex]\Rightarrow v_x=4.3+4.6\times 1.44\\\Rightarrow v_x=4.3+6.624\\\Rightarrow v_x=10.92\ s[/tex]

Consider vertical motion

[tex]\Rightarrow v_y=0+7(1.44)\\\Rightarrow v_y=10.08\ m/s[/tex]

Net velocity is

[tex]\Rightarrow v=\sqrt{10.92^2+10.08^2}\\\Rightarrow v=\sqrt{220.85}\\\Rightarrow v=14.86\ m/s[/tex]

Angle made is

[tex]\Rightarrow \tan \theta =\dfrac{10.08}{10.92}\\\\\Rightarrow \tan \theta =0.92307\\\\\Rightarrow \theta =42.7^{\circ}[/tex]

Answer:

[tex]B=2.91\ \mu T[/tex]

Explanation:

Given that,

The current in the loop, I = 2 A

The radius of the loop, r = 0.4 m

We need to find the magnetic field at a distance 0.09 m along the axis and above the center of the loop. The formula for the magnetic field at some distance is given as follows :

[tex]B=\dfrac{\mu_o}{4\pi }\dfrac{2\pi r^2 I}{(r^2+d^2)^{3/2}}[/tex]

Put all the values,

[tex]B=10^{-7}\times \dfrac{2\pi \times 0.4^2 \times 2}{(0.4^2+0.09^2)^{3/2}}\\\\=2.91\times 10^{-6}\ T\\\\or\\\\B=2.91\ \mu T[/tex]

So, the required magnetic field is equal to [tex]2.91\ \mu T[/tex].

Answer:

5N

Explanation:

We have a simple problem of momentum here.

ΔMomentum= mΔv= FΔt

Solve for F

mΔv/Δt=F

Plug in givens

1*(2-1.5)/0.1=F

F=5N

The amount of force that the wall imparts on the ball is 5.0N

According to Newton's second law, the formula for calculating the force applied is expressed as:

[tex]F=ma[/tex]

m is the mass of the object

a is the acceleration of the object

Since acceleration is the change in velocity of an object, hence [tex]a=\frac{\triangle v}{t}[/tex]

The applied force formula becomes [tex]F=\frac{m\triangle v}{t}[/tex]

Given the following parameters

m = 1.0kg

[tex]\triangle v=2.0-1.5\\\triangle v=0.5m/s[/tex]

t = 0.1sec

Substitute the given parameter into the formula

[tex]F=\frac{1.0\times 0.5}{0.1}\\F=\frac{0.5}{0.1}\\F=5N[/tex]

Hence the amount of force that the wall imparts on the ball is 5.0N

Learn more here: https://brainly.com/question/17811936

Answer:

XL sleep usual Addison officer at home and ear is not a short time to be be free and ear is a short time to make a short time

Explanation:

so that I can take the class on Monday and ear is not a short time to be be free and ear is not a short time to be be free and ear is not a short time to be be free and ear is not a short time to time for a day or night and ear buds is Anshu and duster and duster fgor a day or night is Anshu and duster for a day or not a week of computer science from your computer and I am in the same as I am a short of ti and you can be the first time I will be be

Answer:

6 bits

Explanation:

The quality of digitized signal can be improved by reducing quantizing error. This is done by increasing the number of amplitude levels, thereby minimizing the difference between the levels and hence producing a smoother signal.

Also, Sampling frequently (also known as oversampling) can help in improving signal quality.

To get the number of bits, we use:

2ⁿ = amplitude level

where n is the number of bits.

Given an amplitude level of 64, hence:

2ⁿ = 64

2ⁿ = 2⁶

n = 6 bits

Answer:

Jupiter

Explanation:

Answer:

The answer is Jupiter.

Explanation:

Jupiter is an orange/yellow colored planet.