Answer:
a. 7278 K
b. Kc = 4.542 × 10⁻³¹
Explanation:
a.
The reaction is spontaneous when ΔG° < 0. We can calculate ΔG° using the following expression.
ΔG° = ΔH° - T × ΔS°
Then, the reaction will be spontaneous when,
ΔH° - T × ΔS° < 0
T > ΔH°/ΔS
T > (180.5 × 10³ J/mol)/(24.80J/mol⋅K)
T > 7278 K
b.
First, we will calculate ΔG° at 25 °C (298 K)
ΔG° = ΔH° - T × ΔS°
ΔG° = (180.5 × 10³ J/mol) - 298 K × (24.80J/mol⋅K) = 1.731 × 10⁵ J/mol
Then, we will calculate the equilibrium constant (Kc) using the following expression.
ΔG° = - R × T × ln Kc
-ΔG°/R × T = ln Kc
-(1.731 × 10⁵ J/mol)/(8.314 J/mol.K) × 298 K = ln Kc
Kc = 4.542 × 10⁻³¹
Monomers that each contain a 5-carbon sugar, a phosphate group, and a nitrogenous base combine and form which type of polymer?
A. Amino acid
B. Carboxylic acid
C. Nucleic acid
D. Fatty acid
Answer:
The correct answer is C. Nucleic acid
Explanation:
Nucleic acids are biological polymers which play an important role in the storage and expresion of genetic information. There are two types of nucleic acids: deoxyribonucleic acid (DNA) and ribonucleic acid (RNA). Both are basically composed of:
- a 5-carbon sugar: deoxyribose in DNA and ribose in RNA
- phosphate group
- a nitrogenous base: adenine, cytosine, guanine and thymine in DNA; while RNA contains adenine, cytosine, guanine and uracil.
Part A
If the theoretical yield of a reaction is 23.5 g and the actual yield is 14.8 g, what is the percent yield?
Answer:
[tex]\boxed {\boxed {\sf 63.0 \%}}[/tex]
Explanation:
The percent yield is the ratio of the actual yield to the theoretical yield.
[tex]percent \ yield = \frac{actual \ yield}{theoretical \ yield} * 100[/tex]
The actual yield is the amount obtained from performing a chemical reaction. For this problem, it is 14.8 grams. The theoretical yield is the potential amount from performing a chemical reaction at maximum performance. For this problem, it is 23.5 grams.We can substitute the known values into the formula.
[tex]percent \ yield= \frac{ 14.8 \ g}{23.5 \ g}*100[/tex]
Divide.
[tex]percent \ yield = 0.629787234043*100[/tex]
Multiply.
[tex]percent \ yield = 62.9787234043[/tex]
The original measurements for the theoretical and actual yields have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place.
The 7 to the right, in the hundredths place, tells us to round the 9 up to a 0. Since we rounded up to 0, we have to move to the next place to the left and round the 2 up to a 3.
[tex]percent \ yield \approx 63.0[/tex]
The percent yield is approximately 63.0 percent.
net ionic equation for 2AgF(aq) + k2S = Ag2S (s) + 2KF(aq)
Answer:
The net ionic equation shows the actual reaction more clearly and closer to reality because it writes soluble ionic compounds as the ions and then cancel the spectator ions not involved in the chemical reaction . The net ionic equation results shows the actual chemical reaction taking place.
The net ionic equation for for 2AgF(aq) + k₂S = Ag₂S (s) + 2KF(aq) will be; 2 Ag⁺(aq) + S²⁻(aq) → Ag₂S(s).
To write the net ionic equation for the reaction, we first need to write the balanced molecular equation and then convert it into the ionic equation before finally identifying the net ionic equation.
Write the balanced molecular equation:
2 AgF(aq) + K₂S(aq) → Ag₂S(s) + 2 KF(aq)
In this reaction, silver fluoride (AgF) reacts with potassium sulfide (K₂S) to produce silver sulfide (Ag₂S) and potassium fluoride (KF).
Write the complete ionic equation:
In the complete ionic equation, we separate all the aqueous species (dissociated ions) into their individual ions. Only the solid (s) and gas (g) compounds remain unchanged.
2 Ag⁺(aq) + 2 F⁻(aq) + 2 K⁺(aq) + S²⁻(aq) → Ag₂S(s) + 2 K⁺(aq) + 2 F⁻(aq)
Identify the spectator ions and then write the net ionic equation:
The spectator ions are the ions that do not participate in the actual chemical reaction and remain the same on both sides of the equation. In this reaction, the potassium ions (K⁺) and fluoride ions (F⁻) are spectator ions because they appear on both sides of the equation unchanged.
Net ionic equation:
2 Ag⁺(aq) + S²⁻(aq) → Ag₂S(s)
The net ionic equation shows only the species that actively participate in the chemical reaction. In this case, the silver ions (Ag⁺) and sulfide ions (S²⁻) are the ones involved in forming the silver sulfide (Ag₂S) precipitate.
To know more about net ionic equation here
https://brainly.com/question/34257815
#SPJ3
--The given question is incomplete, the complete question is
"Write the net ionic equation for this reaction. 2AgF(aq) + k₂S = Ag₂S (s) + 2KF(aq)."--
Choose the correct answer to make the statement true.
a. An exothermic reaction has a positive ΔH and absorbs heat from the surroundings.
b. An exothermic reaction feels warm to the touch. a positive ΔH and gives off heat to the surroundings.
c. An exothermic reaction feels warm to the touch. a negative ΔH and absorbs heat from the surroundings.
d. An exothermic reaction feels warm to the touch. a negative ΔH and gives off heat to the surroundings.
e. An exothermic reaction feels warm to the touch.
Fructose is an example of a ketohexose. The -hexose part of the name indicates that fructose is a Choose... that contains Choose... carbons. The keto- part of the name indicates that fructose contains Choose... functional group. Fructose can combine with glucose to form sucrose. Therefore, sucrose is a Choose... .
Answer:
carbohydrate, 6, a carbonyl, disaccharide
Explanation:
Fructose is an example of a ketohexose. The -hexose part of the name indicates that fructose is a carbohydrate that contains 6 carbons. There are more isomers that are ketohexoses.
The keto- part of the name indicates that fructose contains a carbonyl functional group. In ketones, the carbonyl is in an inner carbon.
Fructose can combine with glucose to form sucrose. Therefore, sucrose is a disaccharide. Disaccharides are formed by the bonding of 2 monosaccharides.
Curium – 245 is an alpha emitter. Write the equation for the nuclear reaction and identify the product nucleus.
Answer:
Please find the complete solution in the attached file.
Explanation:
Assuming tea leaves contain 5.0% caffeine by weight what is the maximum weight of caffeine you could isolate from 10.g of tea leaves? Show your work.
Answer:
0.50 g Caffeine
Explanation:
Step 1: Given data
Concentration of caffeine by weight in tea leaves: 5.0%
Mass of tea leaves: 10. g
Step 2: Calculate the maximum weight of caffeine that can be isolated
The concentration of caffeine by weight in tea leaves is 5.0%, that is, there are 5.0 g of caffeine per 100 g of tea leaves. The maximum weight of caffeine in 10. g of tea leaves is:
10. g Tea leaves × 5.0 g Caffeine/100 g Tea leaves = 0.50 g Caffeine
How many molecules of Iron(II)oxide are present in 35.2*10^-23 g of Iron (II)oxide?
Answer:
R.F.M of Iron (II) oxide :
[tex]{ \tt{ = (56 \times 2) + (16 \times 3)}} \\ = 160 \: g[/tex]
Moles :
[tex]{ \tt{ \frac{35.2 \times {10}^{ - 23} }{160} }} \\ = 2.2 \times {10}^{ - 24} \: moles[/tex]
Molecules :
[tex]{ \tt{ = 2.2 \times {10}^{ - 24} \times 6.02 \times {10}^{23} }} \\ = 1.3244 \: molecules[/tex]
The number of molecules of Iron(II) oxide present in 35.2 ×10⁻²³ g of Iron(II) oxide is equal to 2.95.
What is Avogadro's number?Avogadro’s number can be described as the proportionality constant that is used to represent the number of entities or particles in one mole of any substance. Generally, it is used to count atoms, molecules, ions, electrons, or protons, depending upon the chemical reaction or reactant and product.
The value of Avogadro’s constant can be represented as numerically approximately equal to 6.022 × 10²³ mol⁻¹.
Given, the mass of the iron oxide = 35.2 ×10⁻²³ g
The molar mass of the Iron(II) oxide, FeO = 71.84 g/mol
71.84 g of Iron (II) oxide have molecules = 6.022 × 10²³
35.2 ×10⁻²³ g of FeO have molecules = 6.022 × 10²³ × (35.2 ×10⁻²³ /71.84)
The number of molecules of FeO in a given mass = 2.95 molecules
Learn more about Avogadro's number, here:
brainly.com/question/11907018
#SPJ5
A student attempts to separate 4.656 g of a sand/salt mixture just like you did in this lab. After carrying out the experiment, she recovers 2.775 g of sand and 0.852 g of salt.a. What was the percent composition of sand in the mixture according to the student's data? b. What was the percent recovery?
Answer:
Explanation:
a ) Total mixture = 4.656 g
Sand recovered = 2.775 g
percent composition of sand in the mixture
= (2.775 g / 4.656 g ) x 100
= 59.6 % .
b )
Total of sand and salt recovered = 2.775 g + .852 g = 3.627 g .
Total mixture = 4.656 g
percent recovery = (3.627 / 4.656 ) x 100
= 77.9 % .
A ligand is a molecule or ion that acts as a
Answer:
Lewis base/electron pair donors
Explanation:
Ligands are ions or neutral molecules which bond together with a central ion. They act as election pair donors, also known as Lewis bases, while the central ion they are connected to acts as the acceptor.
Therefore, a ligand is a molecule or ion that acts as a Lewis base/electron pair donors
Is sucrose classified as aldose or ketose?
Answer:
Because sucrose is a complex disaccharide, it is not classified as either an aldose or a ketone. Instead, it is a compound that contains both. glucose is aldose sugar and fructose is a ketose sugar.
What is the direct function of the energy released from the nuclear chain reaction in a nuclear power plant? turning the blades of the turbine heating water to produce steam powering the condenser carrying electricity from the plant to consumers
Answer:
the energy released is to make steam to create electricity. yes you are right i just didnt feel like being super technical
In a nuclear reaction, the direct function of the energy released from the nuclear chain reaction in a nuclear power plant is turning the blades of the turbine heating water to produce steam .
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/12786977
#SPJ7
A gas occupies a volume of 202 ml at a pressure of 505 torr. To what pressure must the gas be subject in order to change the volume to 65.0 ml
Answer:
1569 torr
Explanation:
Assuming ideal behaviour and constant temperature, we can solve this problem by using Boyle's law, which states:
V₁P₁ = V₂P₂Where in this case:
V₁ = 202 mLP₁ = 505 torrV₂ = 65.0 mLP₂ = ?We input the data given by the problem:
202 mL * 505 torr = 65.0 mL * P₂And solve for P₂:
P₂ = 1569 torrcomplete the following steps.
Remember to follow lower numbered rules first.
K2S(aq) + CO(NO3)2(aq) COS (?) + KNO3 (?)
a. Write a balanced chemical equation. (1 pt)
b. If a reaction occurs, write the balanced
chemical equation with the proper states of matter
(i.e. solid, liquid, aqueous) filled in. If no reaction
occurs, write “No reaction.” (1 pt)
c. If a reaction occurs, write the net ionic equatibn
for the reaction. If no reaction occurs, write “no
reaction.” (1 pt)
Answer:
See explanation
Explanation:
a) The balanced reaction equation is;
K2S + CO(NO3)2 ------> COS + 2 KNO3
b) When we include the states of matter, we have;
K2S(aq) + CO(NO3)2(aq) ----> COS(s) + 2 KNO3(aq)
c) The complete ionic equation is;
2K^+(aq) + S^2-(aq) + Co^2+(aq) + 2NO3^-(aq) ----> CoS(s) + 2K^+(aq) + 2NO3^-(aq)
Net ionic equation;
Co^2+(aq) + S^2-(aq) ----> CoS(s)
examples s name of thosse food items we can store for a month?
Answer:
1. Nuts
2. Canned meats and seafood
3. Dried grains
4. Dark chocolate
5. Protein powders
What type of intermolecular force exist between H2O and Br2
Answer:
welcome to mobile legends
Explanation:
ml ka muna maya kana mag module
what is Lewis acid and Lewis base? give examples
Explanation:
example is copper iron...........
Consider the following data on some weak acids and weak bases:
Acid Base Ca
Name Formula Name Formula
Hydrocyanic acid HCN 4.9 x 10^-10 Ammonia NH3 1.8x 10^-5
Hypochlorous acid HCIO 3.0x10^-8 Ethylamine C2H5NH2 6.4 x 10^-4
Use this data to rank the following solutions in order of increasing pH.
Solution pH
0.1 M NaCN
0.1M C2H5NH3Br
0.1 M Nal
0.1 M KCIO
Answer:
0.1 M Nal
0.1M C2H5NH3Br
0.1M KClO
0.1M NaCN
Explanation:
The strongest acid is the one that has the higher Ka. Now, the weakest conjugate base is the conjugate base of the strongest acid and vice versa:
In the problem, we have only conjugate bases, as the HCN is the weakest acid, the strongest conjugate base is NaCN, then KClO and as last C2H5NH3Br and NaI (The conjugate base of a strong acid, HI).
The strongest base has the higher pH, that means. Thus, the rank in order of increasing pH is:
0.1 M Nal
0.1M C2H5NH3Br
0.1M KClO
0.1M NaCN
The compound chromium(II) chloride is a strong electrolyte. Write the transformation that occurs when solid chromium(II) chloride dissolves in water. Be sure to specify states such as (aq) or (s).
Answer:
CrCl₂(s) ⇒ Cr²⁺(aq) + 2 Cl⁻(aq)
Explanation:
Chromium (II) chloride is a strong electrolyte, that is, when dissolved in water, it completely dissociates into the ions. The cation is chromium (II) and the anion is chloride. The balanced equation for the solution of chromium (II) chloride is:
CrCl₂(s) ⇒ Cr²⁺(aq) + 2 Cl⁻(aq)
Help naming this plzzzzzzzzzzzzz
Answer:
A. 3-chloro-1-methylcyclobutane.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to infer that the name of this compound is A. 3-chloro-1-methylcyclobutane because of the fact that the parent chain is a cyclobutane which starts by the methyl radical as it has the priority over the chlorine radical which is actually named first at the third carbon (clockwise).
Therefore the name is given in A, accordingly to the IUPAC rules of nomenclature.
Regards!
Use dimensional analysis to solve the following problems. Pay attention to correct use of units and correct use of significant figures in calculations. Please show work!
3) Convert 0.250 moles of aluminum sulfate to grams.
4) Convert 2.70 grams of ammonia to moles.
Answer:
0.000731 grams aluminium sulfate
46.0 mols ammonia
Explanation:
ALS = shorthand for aluminium sulfate which has a molar mass of 342.15 g/mol
[tex]ALS: \frac{0.250mols}{1} *\frac{1g}{342.15mols} = \frac{0.250g}{342.15}=0.0007307 g[/tex]
NH3 has a molar mass of 17.031 g/mol
[tex]NH3: \frac{2.70g}{1} *\frac{17.031mols}{1g} = \frac{0.250g}{342.15}=45.9837 mols[/tex]
Aluminium sulphate (AlS) whose molar mass is= [tex]\sf{ 342.15\dfrac{g}{mol} }[/tex]
we have to find the 0.250 moles of aluminum sulphate.
[tex]\implies AlS=\dfrac{1g}{342.15~mole}×0.250~mole \\\\\implies AlS=\dfrac{0.250}{342.15}\\\\\implies \dfrac{\frac{250}{1000}}{\frac{34215}{100}}\\\\\implies \dfrac{250}{1000}×\dfrac{100}{34215}\\\\=0.00073067\approx{0.0007307~g}[/tex]
[tex]\\\\\\[/tex]
Ammonia(NH3) whose molar mass is =[tex]\sf{17.031\dfrac{mol}{g} }[/tex]
We have to find 2.70 grams of ammonia
[tex]\implies NH_{3}=\dfrac{17.031~mol}{1g}×2.70g\\\\ 17.031×2.70\\\\\dfrac{17031}{1000}×\dfrac{270}{100}\\\\ \dfrac{4598370}{100000}\\\\=45.9837\approx{46~mole}[/tex]
which molecule has 9 carbon atoms
Answer:
c9h8o2
Explanation:
The molecule which has 9 carbon atom is [tex]C_{9} H_{8} O[/tex](cinnamaldehyde).
What is molecule?More than one atoms make up a molecule. If they have more than one atom, atoms could be the same for example, an oxygen molecule contains two oxygen atoms) as well as different (for example, a hydrogen molecule contains two hydrogen atoms.
What is cinnamaldehyde?Cinnamaldehyde is a kind of organic chemical with the formula C6H5CH=CHCHO and the formula C6H5CH=CHCHO. It's mostly the trans isomer that's found in nature.
It is known that the number of carbon atom is 9 hence molecule will be cinnamaldehyde
To know more about cinnamaldehyde and molecule.
https://brainly.com/question/14897941
#SPJ2
Calculate the concentration of ammonium nitrate in a solution prepared by dissolving 3.20 g of the salt in enough water to make 100. mL of solution, then diluting 2.00 mL of this solution to a volume of 25.00 mL.
Answer:
.032 M .
Explanation:
Molecular weight of ammonium nitrate is 80 .
3.2 g = 3.2 / 80 moles
= .04 moles
volume = 100 mL = 0.1 L
Molarity of 100 mL solution = .04 moles / 0.1 L
= 0.4 M solution.
Now 2 mL solution of 0.4 M is diluted to a volume of 25 mL .
Using the formula S₁ V₁ = S₂V₂
0.4 M x 2 mL = S₂ x 25 mL
S₂ = .4 x 2 / 25
= .032 M
Hence required concentration is .032 M .
Explain the term global warming
Answer: A gradual increase in the overall temperature of the earth's atmosphere generally attributed to the greenhouse effect caused by increased levels of carbon dioxide, chlorofluorocarbons, and other pollutants.
Explanation:
办理教留服学位学历认证Q/微29304199英属哥伦比亚UBC毕业证文凭学位证书offer操办英属哥伦比亚留信认证成绩单
Answer:
please translate in english
repining of fruits is which type of change
Answer:
irreversible.
I hope this will help you
Given the chemical equation: KI +Pb(NO3)2—>KNO3 + Pbl2
Balance this chemical equation.
Indicate the type of reaction. How do you know?
Thoroughly discuss how your balanced chemical equation agrees with the law of conservation of mass.
Answer:
[tex]2KI +Pb(NO_3)_2\rightarrow 2KNO_3 + Pbl_2[/tex]
Double replacement reaction.
It is in agreement with the law of conservation of mass because we have two potassium atoms, two iodine atoms, one lead atom, two nitrogen atoms and six oxygen atoms on both sides of the chemical equation (count them).
Explanation:
Hello there!
In this case, according to the given information, it turns possible for us to solve this problem by firstly considering that this reaction occurs between potassium iodide and lead (II) nitrate to yield potassium nitrate and lead (II) iodide which is clearly not balanced since we have one iodine atom on the reactants and two on the products, that is why the balance implies the placement of a coefficient of 2 in front of both KI and KNO3 as shown below:
[tex]2KI +Pb(NO_3)_2\rightarrow 2KNO_3 + Pbl_2[/tex]
Thus, we infer this is a double replacement reaction due to the exchange of both cations, K and Pb with both anions, I and NO3. Moreover, we can tell this balanced reaction is in agreement with the law of conservation of mass because we have two potassium atoms, two iodine atoms, one lead atom, two nitrogen atoms and six oxygen atoms on both sides of the chemical equation (count them).
Regards!
Plastic is a polymer
-True
-False
TRUE
Explanation:
*not sure about this answer
If you reacted 88.9 g of ammonia with excess oxygen, what mass of water would you expect to make? You will need to balance the equation first.
NH3(g) + O2(g) -> NO(g) + H2O(g)
Explanation:
here's the answer to your question
Which of the following is not organic compound?
a. CH4
b. H2CO3
c. CCl4
d. CH3-OH
