g Calculate the final speed of a solid cylinder that rolls down a 5.00-m-high incline. The cylinder starts from rest, has a mass of 0.750 kg, and has a radius of 4.00 cm.

Answers

Answer 1

Answer:

[tex]V=8.08m/s[/tex]

Explanation:

From the question we are told that:

Height[tex]h=5.00m[/tex]

Mass [tex]m=0.750kg[/tex]

Radius [tex]r=4.00cm=>0.04m[/tex]

Generally the equation for Total energy is mathematically given by

  [tex]mgh=\frac{1}{2}mv^2+\frac{1}{2}Iw^2[/tex]

Therefore

 [tex]V=\sqrt{\frac{4gh}{3}}[/tex]

 [tex]V=\sqrt{\frac{4*9.8*5}{3}}[/tex]

 [tex]V=8.08m/s[/tex]


Related Questions

A 2 kg object traveling at 5 m s on a frictionless horizontal surface collides head-on with and sticks to a 3 kg object initially at rest. Which of the following correctly identifies the change in total kinetic energy and the resulting speed of the objects after the collision? Kinetic Energy Speed
(A) Increases 2 m/s 3.2 m/s
(B) Increases Soold 2 m/s
(C) Decreases 3.2 m/s
(D) Decreases

Answers

Answer: (d)

Explanation:

Given

Mass of object [tex]m=2\ kg[/tex]

Speed of object [tex]u=5\ m/s[/tex]

Mass of object at rest [tex]M=3\ kg[/tex]

Suppose after collision, speed is v

conserving momentum

[tex]\Rightarrow mu+0=(m+M)v\\\\\Rightarrow v=\dfrac{2\times 5}{2+3}\\\\\Rightarrow v=2\ m/s[/tex]

Initial kinetic energy

[tex]k_1=\dfrac{1}{2}\times 2\times 5^2\\\\k_1=25\ J[/tex]

Final kinetic energy

[tex]k_2=\dfrac{1}{2}\times (2+3)\times 2^2\\\\k_2=10\ J[/tex]

So, it is clear there is decrease in kinetic energy . Thus, energy decreases and velocity becomes 2 m/s.

Which of the following elements has the largest atomic radius?
Silicon
Aluminum
Sulfur
Phosphorous

Answers

aluminum has the largest atomic radius

Answer:

francium

Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.

Copy the diagram. add a voltmeter to show how you would measure the voltage of the cell

Answers

Answer: the answer is 23voltage

Explanation: because the voltage and time put together is 23

A man weighing 720 N and a woman weighing 500 N have the same momentum. What is the ratio of the man's kinetic energy Km to that of the woman Kw?

Answers

Answer:

Because weight W = M g, the ratio of weights equals the ratio of masses.

(M_m g)/ (M_w g) = [ (p^2 Man )/ (2 K_man)] / [ (p^2 Woman )/ (2 K_woman)

but p's are equal, so

K_m/K_m = (M_w g)/(M_m g) = W_woman / W_man = 450/680 = 0.662Explanation:

A lens with a focal length of 15 cm is placed 45 cm in front of a lens with a focal length of 5.0 cm .

Required:
How far from the second lens is the final image of an object infinitely far from the first lens?

Answers

Answer:

the required distance is 6 cm

Explanation:

Given the data in the question;

f₁ = 15 cm

f₂ = 5.0 cm

d = 45 cm

Now, for first lens object distance s = ∝

1/f = 1/s + 1/s' ⇒ 1/5 = 1/∝ + 1/s'

Now, image distance of first lens s' = 15cm  

object distance of second lens s₂ will be;

s₂ = 45 - 15 = 30 cm

so

1/f₂ = 1/s₂ + 1/s'₂

1/5 = 1/30 + 1/s'₂

1/s'₂ = 1/5 - 1/30  

1/s'₂ = 1 / 6

s'₂ = 6 cm

Hence, the required distance is 6 cm

 

The distance of the final image from the first lens will be is 6 cm.

What is mirror equation?

The mirror equation expresses the quantitative connection between object distance (do), image distance (di), and focal length (fl).

The given data in the problem is;

f₁ is the focal length of lens 1= 15 cm

f₂ s the focal length of lens 2= 5.0 cm

d is the distance between the lenses = 45 cm

From the mirror equation;

[tex]\frac{1}{f} = \frac{1}{s} +\frac{1}{s'} \\\\ \frac{1}{5} = \frac{1}{\alpha} +\frac{1}{s'} \\\\[/tex]

If f₁ is the focal length of lens 1 is 15 cm then;

[tex]s'=15 cm[/tex]

f₂ s the focal length of lens 2= 5.0 cm

s₂ = 45 - 15 = 30 cm

From the mirror equation;

[tex]\frac{1}{f_2} = \frac{1}{s_1} +\frac{1}{s_2'} \\\\ \frac{1}{5} = \frac{1}{30} +\frac{1}{s_2'} \\\\ \frac{1}{s_2'}= \frac{1}{5} -\frac{1}{30} \\\\ \frac{1}{s_2'}= \frac{1}{6} \\\\ \rm s_2'= 6 cm[/tex]

Hence the distance of the final image from the first lens will be is 6 cm.

To learn more about the mirror equation refer to the link;

https://brainly.com/question/3229491

A string that is under 50.0N of tension has linear density 5.0g/m. A sinusoidal wave with amplitude 3.0cm and wavelength 2.0m travels along the string. What is the maximum speed of a particle on the string

Answers

Answer:

9.42 m/s

Explanation:

Applying,

V' = Aω.............. Equation 1

Where V' = maximum speed of the string, A = Amplitude of the wave, ω = angular velocity.

But,

ω = 2πf................. Equation 2

Where f = frequency, π = pie

And,

f = v/λ................ Equation 3

Where, λ = wave length, v = velocity

Also,

v = √(T/μ)................. Equation 4

Where T = Tension, μ = linear density.

From the question,

Given: T = 50.0 N, μ = 5.0 g/m = 0.005 kg/m

Substitute into equation 4

v = √(50/0.005)

v = √(10000)

v = 100 m/s

Also Given: λ = 2.0 m

Substitute into equation 3

f = 100/2

f = 50 Hz.

Substitute the value of f into equation 2

Where π = constant = 3.14

ω = 2(3.14)(50)

ω = 314 rad/s

Finally,

Given: A = 3.0 cm = 0.03 m

Substitute into equation 1

V' = 0.03(314)

V' = 9.42 m/s

what is the frequency of a wave related to​

Answers

Answer:

Frequency is the number of complete oscillations or cycles or revolutions made in one second.

What is 3*10^-6 divided by 2.5*10^6 expressed in standard notation?​

Answers

Answer:

1.2 x 10^-12

Explanation:

3/2.5 x 10^-6/10^6

1.2 x 10^-6 x 10^-6

1.2 x 10^-12

A scenario where reaction time is important is when driving on the highway. During the delay between seeing an obstacle and reacting to avoid it (or to slam on the brakes!) you are still moving at full highway speed. Calculate how much distance you cover in meters before you start to put your foot on the brakes if you are travelling 65 miles per hour.

Answers

Answer:

66.83 meters

Explanation:

After a quick online search, it seems that scientists calculate the average reaction time of individuals as 2.3 seconds between seeing an obstacle and putting their foot on the brakes. Now that we have this reaction time we need to turn the miles/hour into meters/second.

1 mile = 1609.34 meters  (multiply these meters by 65)

65 miles = 104,607 meters

1 hour = 3600 seconds

Therefore the car was going 104,607 meters every 3600 seconds. Let's divide these to find the meters per second.

[tex]\frac{104,607}{3600} = \frac{29.0575 meters}{1 second}[/tex]

Now we simply multiply these meters by 2.3 seconds to find out the distance covered before the driver puts his/her foot on the brakes...

29.0575m * 2.3s = 66.83 meters

which of the following is a correct statement. a. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are constant. b. In dc steady state conditions, the voltages across the capacitors are zero and the currents through the capacitance are constant. The current through the inductors are constant and the voltage across the inductances are zero. c. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are zero and the voltage across the inductances are constant. d. WIn dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

Answers

Answer:

d. In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

Explanation:

The current through a capacitor is given by i = CdV/dt where C = capacitance of capacitor and V = voltage across capacitor. At steady state dV/dt = 0 and V = constant. So, i = CdV/dt = C × 0 = 0.

So, in dc steady state, the voltage across a capacitor is constant and the current zero.

The voltage across an inductor is given by V = Ldi/dt where L = inductance of inductor and i = current through inductor. At steady state di/dt = 0 and V = constant. So, V = Ldi/dt = L × 0 = 0.

So, in dc steady state, the voltage across an inductor is zero and the current constant.

So, In dc steady state conditions, the voltages across the capacitors are constant and the currents through the capacitance are zero. The current through the inductors are constant and the voltage across the inductances are zero.

The answer is d.

Hai điện tích điểm Q1 = 8 C, Q2 = –6
C đặt tại hai điểm A, B cách nhau 0,1
m trong không khí. Tính cường độ điện
trường do hai điện tích này gây ra tại
điểm M, biết MA = 0,2 m

Answers

Answer:

English please

Explanation:

I don't understand the question

If 1.02 ✕ 1020 electrons move through a pocket calculator during a full day's operation, how many coulombs of charge moved through it?

Answers

Answer:

Explanation:

one electron has [tex]1.60217662*10^{-19}~coulombs~then\\\\1.02*10^{20}~electrons------->1.02*10^{20}*1.60217662*10^{-19}~coulombs= 16.3422~coulombs[/tex]

E=kq/r^2 chứng minh điện thế V=kq/r từ mối liên hệ giữa điện trường E và điện thế V

Answers

Answer:

hindi ko maintindihan teh

A digital signal differs from an analog signal because it a.consists of a current that changes smoothly. b. consists of a current that changes in pulses. c.carries information. d. is used in electronic devices.​

Answers

Answer:

d.it is used in electronic devices

why material selection is important to design and manufacturing?​

Answers

Answer:

. You want your product to be as strong and as long lasting as possible. There are also the safety implications to consider. You see, dangerous failures arising from poor material selection are still an all too common occurrence in many industries. yep that the answer have a Great day

Explanation:

(◕ᴗ◕✿)

the unit of area is called a derived unit.why?​

Answers

Explanation:

the unit of area is called a derived unit because it is made of two fundamental unit metre and metre.

Pete is investigating the solubility of salt (NaCl) in water. He begins to add 50 grams of salt to 100 grams of
room temperature tap water in a beaker. After adding all of the salt and stirring for several minutes, Pete
notices a solid substance in the bottom of the beaker. Which statement best explains why there is a solid
substance in the bottom of the beaker?
A. The salt he is using is not soluble in water.
B. The salt is changing into a new substance that is not soluble in water,
C. The dissolving salt is causing impurities in the water to precipitate to the bottom
D. The water is saturated and the remaining salt precipitates to the bottom

Answers

Answer:

would the answer be c

Explanation: that what i think in my opian

Answer:

A

Explanation:

Give the missing ammeter reading a and b. suggest why more current flow through some bulbs than through others Grade 10 question and Answer

Answers

Answer:

becaude of electricity

A hoop rolls with constant velocity and without sliding along level ground. Its rotational kinetic energy is:______a- half its translational kinetic energyb- the same as its translational kinetic energyc- twice its translational kinetic energyd- four times its translational kinetic energy

Answers

Answer:

The same as its translational KE.

The easy way to do this is to make up numbers and use them.

So, I'll say m=2 and r=3. I will also say v=3 .

Rot. Inertia of a hoop is mr^2. So the rot KE is: 1/2 (mr^2)(w^2)

note: (1/2*I*w^2)

Translational kinetic energy is basically normal KE, so 1/2(m)(v^2)

Now, lets plug our made up values in:

Rot Ke : 1/2 (9*2)(3/3) *note w = v/r

Tran Ke: 1/2(2)(9)

Rot Ke: 9

Tran Ke: 9

9=9, same.

plz answer the question

Answers

Answer:

Ray A = Incidence ray

Ray B = Reflected ray

Explanation:

From the law of reflection,

Normal: This is the line that makes an angle of 90° with the reflecting surface.

Ray A is the incidence ray: This is the ray that srikes the surface of a reflecting surface. The angle formed between the normal and the incidence ray is called the incidence angle

Ray B is the reflected ray: This is the ray leaves the surface of a reflecting surface. The angle formed between the reflected ray and the normal is called reflected angle

nariz (am
miria amy
0 = 0 +260 + (0)
U= 29 mb
6= ut +1 (04)
Car I was sitting at rest when it nous hit from
the rear by car 2 of identical mass. Both cant had
their heaks on and they stidled together Guy
in the original directioned of motion. If the stopping
force is notx (Combined weight of the cars), die
u=0 to find the approximate speed of car a just
before the collision took place on​

Answers

Answer:

33 mph

Explanation:

My best guess

A car is stopped for a traffic signal. When the light turns green, the car accelerates, increasing its speed from zero to 9.41 m/s in 4.24 s. What is the magnitude of the linear impulse experienced by a 67.0 kg passenger in the car during this time

Answers

Answer:

the impulse experienced by the passenger is 630.47 kg

Explanation:

Given;

initial velocity of the car, u = 0

final velocity of the car, v = 9.41 m/s

time of motion of the car, t = 4.24 s

mass of the passenger in the car, m = 67 kg

The impulse experienced by the passenger is calculated as;

J = ΔP = mv - mu = m(v - u)

           = 67(9.41 - 0)

           = 67 x 9.41

           = 630.47 kg

Therefore, the impulse experienced by the passenger is 630.47 kg

A strong trough in a Rossby wave occurs when the jet stream A. bends towards the Equator. B. bends toward the poles. C. does not bend but maintains an east to west flow. D. does not bend but maintains a west to east flow.

Answers

Answer:

A. bends towards the Equator.

Explanation:

Rossby waves are inertial waves that are naturally occurring in a rotating fluids. These waves are also called as the planetary waves.

The Rossby waves are undulated that occur in the polar front jet stream when there is a significant differences in the temperatures between the polar and the tropical air masses.

It occurs when the polar air masses moves towards the equator and when the tropical air masses moves towards the pole.  It is formed when the air bends away from the poles and bends towards the equator.

Hence the correct option is (A).

what change occurs to the mass of an object when a unbalanced

Answers

Answer:

The mass decreases

Explanation:

Just smart

If the loading is 0.4, the coinsurance rate is 0.2, the number of units of medical care is 100, and the number of units of medical care is 1. What is the premium of this insurance?

Answers

Answer:

72  is the premimum of the insurance.

Explanation:

Below is the given values:

The loading = 0.4

Coinsurance rate = 0.2

Number of units = 100

Total number of units = 100 * 0.4 = 40

Remaining units = 60 * 0.2 = 12

Add the 60 and 12 values = 60 + 12 = 72

Thus, 72  is the premimum of the insurance.

A car moving in a straight line uniformly accelerated speed increased from 3 m / s to 9 m / s in 6 seconds. With what acceleration did the car move?


a.
2 m/s2


b.
1 m/s2


c.
0 m/s2


d.
3 m/s2

Answers

I think it’s 1 . The answer is B

Answer:

b) 1 m/s

I am sure...........

Two children stretch a jump rope between them and send wave pulses back and forth on it. The rope is 3.3 m long, its mass is 0.52 kg, and the force exerted on it by the children is 47 N. (a) What is the linear mass density of the rope (in kg/m)

Answers

Answer:

The linear mass density of rope is 0.16 kg/m.

Explanation:

mass, m = 0.52 kg

force, F = 47 N

length, L = 3.3 m

(a) The linear mass density of the rope is defined as the mass of the rope per unit length.

Linear mass density = m/L = 0.52/3.3 = 0.16 kg/m

The image shows the right-hand rule being used for a current-carrying wire.

An illustration with a right hand with fingers curled and thumb pointed up.

Which statement describes what the hand shows?

When the current flows down the wire, the magnetic field flows out on the left side of the wire and in on the right side of the wire.
When the current flows up the wire, the magnetic field flows out on the left side of the wire and in on the right side of the wire.
When the current flows down the wire, the magnetic field flows in on the left side of the wire and out on the right side of the wire.
When the current flows up the wire, the magnetic field flows in on the left side of the wire and out on the right side of the wire.

Answers

D PLS MARK ME AS BRAINLY

Answer:

The answer is (D): When the current flows up the wire, the magnetic field flows in on the left side of the wire and out on the right side of the wire.

Explanation:

A ship is flying away from Earth at 0.9c (where c is the speed of light). A missile is fired that moves toward the Earth at a speed of 0.5c relative to the ship. How fast does the missile move relative to the Earth

Answers

Answer:

the required speed with which the missile move relative to the Earth is -0.727c

Explanation:

Given the data in the question;

relative velocity relation;

u' = u-v / 1 - [tex]\frac{uv}{c^2}[/tex]

so let V[tex]_B[/tex] represent the velocity as seen by an external reference frame; u=V[tex]_B[/tex]

and let V[tex]_A[/tex] represent the speed of the secondary reference frame; v=V[tex]_A[/tex]

hence, u' is the speed of B as seen by A

so

u' = V[tex]_B[/tex]-V[tex]_A[/tex] / 1 - [tex]\frac{V_BV_A}{c^2}[/tex]

now, given that; V[tex]_A[/tex] = 0.9c  and V[tex]_B[/tex]  = 0.5c

we substitute

u' = ( 0.5c - 0.9c ) / 1 - [tex]\frac{(0.5c)(0.9c)}{c^2}[/tex]

u' = ( 0.5c - 0.9c ) / 1 - [tex]\frac{c^2(0.5)(0.9)}{c^2}[/tex]

u' = ( 0.5c - 0.9c ) / 1 - (0.5 × 0.9)

u' = ( -0.4c ) / 1 - 0.45

u' = -0.4c / 0.55

u' = -0.727c

Therefore, the required speed with which the missile move relative to the Earth is -0.727c

help asap PLEASE I will give u max everything all that

steps if possible

Answers

Explanation:

2. [tex]R_T = R_1 + R_2 + R_3 = 625\:Ω + 330\:Ω + 1500\:Ω[/tex]

[tex]\:\:\:\:\:\:\:= 2455\:Ω = 2.455\:kΩ[/tex]

3. Resistors in series only need to be added together so

[tex]R_T = 8(140\:Ω) = 1120\:Ω = 1.12\:kΩ[/tex]

Other Questions
Lines DE and AB intersect at point C.What is the value of x? 10) The second angle in a triangle is 3 less than twice the first angle. The third angle measure 8 more thantwice the first angle Find each angle. 7th grade science help me plsssss Scenario 34-1. Take the following information as given for a small, imaginary economy: When income is $10,000, consumption spending is $6,500. When income is $11,000, consumption spending is $7,250. Refer to Scenario 34-1. The marginal propensity to consume (MPC) for this economy is think of six to eight problems your city/country faces. A capacitor of capacitance 102/ F is connected across a 220 V, 50 Hz A.C. mains. Calculate the capacitive reactance, RMS value of current and write down the equations of voltage and current. Which of the following skills are especially important in the IV room, where intravenous medications are made?Question 1 options:a) Mathb) Speedc) Teamworkd) Conflict resolution Plzzz help me...A shoe company made a special edition basketball sneaker in a limited quantity. The sneaker sold out quickly and iscurrently unavailable. Which economic concept does this scenario demonstrate?O opportunity costO scarcitynonrenewable resourcesO specialization How many and what type of solutions does 7x^24x+3 have? 1 rational solution 2 rational solutions 2 irrational solutions 2 nonreal solutions Jim, Carla and Tomy are members of the same family. Carla is 5 years older than Jim. Tomy is 6 years older than Carla. The sum of their three ages is 31 years. How old is each one them? Find the largest possible rectangular area you can enclose, assuming you have 128 meters of fencing. What is the (geometric) significance of the dimensions of this largest possible enclosure? Explain the general distribution of life in aquatic systems as a function of chemistry, geography, light, depth, salinity, and temperature. A - y = -2x + 40B - y = 2x + 40C y = 1/2x + 40D - y=-1/2x +40 h(x)=6/(x-3), find h(5) consider the equation k over x equals 12 where k is any number between 20 and 65 and X is a positive integer what are the possible values for x Mike roller skates with a constant speed of 10 miles per hour. How long will he take to travel a distance of 15 miles. Given the balanced reaction: Zn + 2HCl H2 + ZnCl2If 5 grams of each reactant are available for the reaction and HCl is knownto be the limiting reactant, which of the following is correct?O Both reactants will be completely used up.O There will be excess of both reactants remaining.O HCl will be completely used up while Zn will remain in excess.O Zn will be completely used up while HCl will remain in excess. do themath!Wavelength FrequencySpeedMedium200 Hz1500 m/sThe table shows measurements ofsome properties of a sound wave inwater and in air.Water400 Hz3.75 mWater343 m/sAir (20C)10 mCalculate Using what you knowabout the relationship betweenwavelength, frequency, and speed,fill in the table.17.15 Hz343 m/sAir (20C)1aCHALLENGE What can this tabletellyou about the speed of a wave? Magali exerts a force of 4.5 N to slide her Blackberry across the table (so she can hide it from Hina!). If she does 2.7 J of work in the process, how far has the Blackberry moved? Express the ratio below in its simplest form. 1.5 : 1