Answers
Answer:
Function A: +3
Function B: +2
y intercept is greater in Function B, the value is 16
Explanation:
Related Questions
DO the postulates of daltons atomic theory explain the law of consrevetion of mass and thelaw of constant composition
Answers
Answer:
see answer
Explanation:
DO the postulates of Daltons atomic theory explain the law of conservation of mass and the law of constant composition.
Dalton's Atomic Theory Postulates1. Everything is composed of atoms, which are the indivisible building blocks of matter and cannot be destroyed or divided any further.
2. All atoms of a single pure element are the same in size and mass
3. Atoms of different elements vary from each other in size and mass.
4. Compounds are produced through different simple whole-number combinations of atoms to produce molecules.
5. Anywhere a compound exists, it will have the same atoms in the same ratio.
6. A chemical reaction between compounds is a re-arrangement of atoms
The law of conservation of mass is shown in 2, 4. and 5.
The law of constant co,position is shown in 2, 4, 5, and 6
Which of these elements would have an electron affinity higher than that of oxygen?
Li
Ca
Ne
C
Be
Answers
Answer: Ne ( Neon )
Explanation: Lithium ( Li ), beryllium ( Be ), carbon ( C ), oxygen ( O ), and neon ( Ne ), are all in Period 2 in that order. Sodium ( Na ) is in Period 3. Since electron affinities decrease as you go down, Na would have a lower electron affinity level then Li but since electron affinities increase as you go across a period, only neon is farther right then oxygen ( O ), so it would be the only one element of this group that would have a higher electron affinity than that of oxygen.
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Option C is correct option.
What is periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
Periodic table help a scientist to know what are the different types of elements are present in periodic table so that they can discover the new elements that are not being discovered yet.
On going down the group electronegativity decreases. On going along the period the electronegativity increases. So, Neon lies on the extreme right of Fluorine in the same period. Neon will have more electronegativity than oxygen.
Therefore, Neon is more electronegativity than fluorine.
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ2
0.0200 moles of a compound is found to have a mass of 1.64 g. Find the formula mass of the compound
Give your answers to 3 significant figures
Answers
Answer: 82.0 g/mole
Explanation:
Use the units to see that if we divide 1.64 grams by 0.0200 moles, we'll get a number that is grams/mole, the definition of formula mass.
1.64/0.0200 = 82.0 g/mole (3 sig figs)
We can't tell from this alone what the molecular formula might be, but C6H10 (cyclohexene) comes close (82.1 grams/mole).
The formula mass of the compound will be approximately 82.0 g/mol
The formula mass of the compound is the sum of atomic masses of all the atoms in its chemical formula. It is calculated by adding up the atomic masses of the individual elements in the compound, each multiplied by the subscript indicating the number of atoms of that element in the formula.
To find the formula mass of the compound, we'll use the relationship between moles, mass, and molar mass.
Molar mass (in g/mol) = Mass (in g)/Moles
Given:
Mass = 1.64 g
Moles = 0.0200 moles
Let's plug the values and calculate molar mass:
Molar mass = 1.64 g / 0.0200 moles
Molar mass ≈ 82.0 g/mol
The formula mass of the compound is approximately 82.0 g/mol, rounded to three significant figures.
To know more about formula mass here
https://brainly.com/question/28647347
#SPJ3
mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron. carbon. plastic. glass.
Answers
Mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.
What is iron?The chemical element iron has the atomic number 26 and the symbol Fe. It is a metal that is found in group 8 of a periodic table and the first transition series. It makes up a large portion of the planet's outer or inner core and is the most prevalent element on Earth by mass, just ahead of oxygen.
It is the fourth most prevalent element in the crust of the Earth, having been mostly deposited by meteorites inside its metallic state, along with its ores. Iron ores must be processed in kilns or furnaces that may reach 5000 °C (2,730 °F) and higher, which is approximately 500 °C (932 °F) greater than the temperature needed to smelt copper. Mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.
Therefore, mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.
To know more about iron, here:
https://brainly.com/question/3299672
#SPJ7
Which polymer structure should be used if a strong and heat - resistant adhesive is required?
1. Linear
2. Branched
3. Networked
4 . Cross - linked
Answers
Cross-linked polymers are strong and heat - resistant hence they can be used for this purpose.
A polymer is obtained by the combination of small molecules called monomers. A polymer consists of a regular repeating unit of small molecules called monomers.
A cross-linked polymer is a polymer in which covalent bonds are used to join polymer chains together. Cross-linked polymers are strong and heat - resistant hence they can be used for this purpose.
Learn more: https://brainly.com/question/17638582
the factor that governs the formula of an ionic compound such as ca3n2 is
Answers
Answer:
the charge or oxidation number on the cation and anion.
Explanation:
The factor that governs the formula of an ionic compound such as Ca3N2 is the charge or oxidation number on the cation and anion.
In the example, Ca has a +2 charge, N has a -3 charge
So we need 3 x ( +2) to balance 2 x (-3) and have an electrically neutral compound, so
+6 -6 =0
The factor that governs the formula of an ionic compound such as Ca₃N₂ is charge.
What are ionic compounds?Those compounds in which ionic bond is present between the cation and anion is known as ionic compound.
The most important factor that is essential for the formation of ionic compounds are charge i.e. positive charge and negative charge. In the given compound Ca₃N₂, Calcium (Ca) is present in the +2 oxidation state and Nitrogen is present in the -3 oxidation state. So due to attraction between these charges they make a ionic compound.
Hence charge is important factor.
To know more about ionic compounds, visit the below link:
https://brainly.com/question/11638999
What is an ionic bond.
Answers
Answer:
ionic bond is the type of bond formed from electrostatic attraction between oppositely charged ion in a chemical compound
I NEED THE ANSWER ASAP! Its science btw
Which statement describes conditions in which a mineral can form?
A. Crystals of minerals dissolve in the groundwater in caves.
B. Materials dissolved in seawater crystallize on an ocean bottom.
C. Molten materials are cooled in a netalworks factory
D. Materials are mined from deposits deep underground.
Answers
Answer:
b
Explanation:
How often a wave occurs is the wave’s
A. crest.
B. frequency.
C. wavelength.
D. amplitude
Answers
Frequency – The frequency of a wave is the number of waves that pass a given point in a certain amount of time. Frequency is measured in units called hertz (Hz), and is defined as the number of waves per second. A wave that occurs every second has a frequency of 1 wave per second (1/s) or 1 Hz.
What do all atoms in a period (horizontal rows) have in common?
Answers
Answer:
the same number of atomic orbitals.
Explanation:
Answer:
All of the elements in a period have the same number of atomic orbitals. For example, every element in the top row (the first period) has one orbital for its electrons. All of the elements in the second row (the second period) have two orbitals for their electrons.
hope this helps
if it does please mark brianliest
renal calculi contain crystallized calcium, magnesium, and uric acid. explain why patients with hyperparathyroidism would be at risk for developing renal calculi.
Answers
Patients with hyperparathyroidism would be at risk for developing renal calculi because of high calcium levels excreted by the kidney.
Hyperparathyroidism occurs when there is over secretion of parathyroid hormone by the parathyroid glands.
The parathyroid hormone is responsible for the following in the body:
Release of calcium by bones into the bloodstream. Absorption of calcium from food by the intestines, and Conservation of calcium by the kidneys.Renal calculi are strong masses of stones deposited in the kidneys or urinary bladder.
When there is excess calcium in the blood due to hyperparathyroidism, the kidneys would be over burdened with the excretion of excess calcium.
That extra calcium in the kidney & the urine leads to kidney stone development ( renal calculi).
Therefore, patients with hyperparathyroidism would be at risk for developing renal calculi because of high calcium levels excreted by the kidney.
Learn more here:
https://brainly.com/question/24153052
which of the following molecules can form hydrogen bonds with others like it?
Answers
Answer:
nitrogen, oxygen and fluorine
Why are you more likely to become dehydrated in hot weather?
Answers
Answer:
sweat
Explanation:
you get dehydrated in hot weather because your body will release sweat to try and keep you cool
Answer:
Well, the heat can sometimes be very subtle in how it affects the body. If you're out in the sun, it can take just 30 minutes or up to a few hours for the heat to cause dehydration, nausea or it could cause trouble concentrating. When it's hot and humid, your risk of dehydration and heat illness increases. That's because when the air is humid, sweat can't evaporate and cool you as quickly as it normally does, and this can lead to an increased body temperature and the need for more fluids.
I HOPE DAT THIS HELPS :)
Explanation:
If you have a 100g of Boron and you want to find out how
many molecules of Boron you have, you would need to...
Answers
Answer:
5.57 x 10^24 atoms
Explanation:
first, you are seeking the number of ATOMS of Boron.
Boron has an Atomic mass of 10.8 g/mol (see #5 on the periodic table)
100 gm of Boron would have 100 g /10.8 g/mol =9.26 moles
each mole has Avogadros number of atoms 6.02 x 10^23
9.26 moles has 9.26 x 6.02 x 10^23 atoms =5.57 x 10^24 atoms
why does helium fusion require higher temperatures
Answers
Answer:
Nuclear fusion of hydrogen to form helium occurs naturally in the sun and other stars. It takes place only at extremely high temperatures. That's because a great deal of energy is needed to overcome the force of repulsion between the positively charged nuclei.
Explanation:
hope it helps
What is the theoretical yield of sodium chloride when 8.3 g of sodium is reacted with 4.5 g of chlorine? 2Na(s) + Cl2(g) → 2NaCl(s)
Answers
The theoretical yield of sodium chloride when 8.3 g of sodium react with 4.5 g of chlorine is 3.30 g
We'll begin calculating the masses of Na and Cl that reacted and the mass of NaCl produced from the balanced equation.
2Na + Cl₂ —> 2NaClMolar mass of Na = 23 g/mol
Mass of Na from the balanced equation = 2 × 23 = 46 g
Molar mass of Cl₂ = 2 × 35.5 = 71 g/mol
Mass of Cl₂ from the balanced equation = 1 × 71 = 71 g
Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol
Mass of NaCl from the balanced equation = 2 × 58.5 = 117 g
SUMMARY
From the balanced equation above,
46 g of Na reacted with 71 g of Cl₂ to produce 117 g of NaCl
Next, we shall determine the limiting reactant.From the balanced equation above,
46 g of Na reacted with 71 g of Cl₂
Therefore,
8.3 g of Na will react with = (8.3 × 71)/46 = 12.81 g of Cl₂
From the calculation made above, we can see that a higher amount (i.e 12.81 g) of Cl₂ than what was given (i.e 4.5 g) is needed to react completely with 8.3 g of Na.
Therefore, Cl₂ is the limiting reactant and Na is the excess reactant
Finally, we shall determine the theoretical yield of NaCl by using the limiting reactant (i.e Cl₂)From the balanced equation above,
71 g of Cl₂ reacted to produce 117 g of NaCl.
Therefore,
4.5 g of Cl₂ will react to produce = (4.5 × 117)/71 = 3.30 g of NaCl
Thus, the theoretical yield of NaCl produced is 3.30 g
Learn more: https://brainly.com/question/25669079
Answer:
The correct answer is 7.4 g NaCl
Explanation:
asap help for brainlist
Which pair of atoms will form a covalent bond?
Question 7 options:
H and O
Li and I
K and Fl
Na and Cl
Answers
Answer:
h and o
Explanation:
because both are non metals
Solid calcium hydroxide is dissolved in water until the pH of the solution is 11.44. The hydroxide ion concentration [OH–] of the solution is:______.A. 1.1 * 10-11 M.B. 3.06 M.C. 8.7 * 10-4 M.D. 1.0 * 10-14 M.E. None of these.
Answers
Answer:
c the answer is c that is the answer
Elements with ________________ first ionization energies and ___________ electron affinities generally form cations.
Answers
Answer:
elements with low first ionization energies and positive or slightly negative electron affinities generally form cations.
hope it is helpful:)
How many deciseconds are
in 554 seconds?
Give your answer in standard form.
Answers
Answer:
5540
Explanation:
Answer:
5,440
Explanation:
10 deciseconds = 1 seconds
554 seconds = 5,440 seconds
22) Calculate the energy of a photon of radiation with a frequency of 9.50 x 1013 Hz.
Answers
The energy of the photon with a frequency of 9.50×10¹³ Hz is 6.29×10¯²⁰ J
From the question given above, the following data were obtained:
Frequency (f) = 9.50×10¹³ Hz
Planck's constant (h) = 6.626×10¯³⁴ Js
Energy (E) =?The energy of the photon can be obtained as follow:
E = hf
E = 6.626×10¯³⁴ × 9.50×10¹³
E = 6.29×10¯²⁰ JTherefore, the energy of the photon is 6.29×10¯²⁰ J
Learn more: https://brainly.com/question/7957705
The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth’s atmosphere. Which of the following would be the most reasonable changes that could result from an increase in the burning of fossil fuels?
Answers
Explanation:
The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth's atmosphere.
The materials which contain hydrocarbons which are generated from the remains of decay of plants and animals that are buried underground for many years are called fossil fuels.
What causes by burning fossil fuels?The burning of fossil fuels can affect the environment, climatic conditions and human health. The burning of fossil fuels produces large amount of green house gases like CO₂, CH₄, etc. The increase in the amount of green house gases increases the heat and temperature of the earth's surface which leads to global warming.
The increase of temperature due to global warming can cause rise in the sea level, the glaciers of the earth will melt and coastal areas will be submerged under water due to this.
The burning of fossil fuels also releases toxic gases like SO₂, NO₂ which can cause acid rain and the emission these gases causes air pollution.
Thus the burning of fossil fuels has adverse effects.
To know more about fossil fuels, visit;
https://brainly.com/question/29770775
#SPJ6
Which option is a key point of cell theory? Cells can repair neighboring cells, but not themselves.Cells can repair neighboring cells, but not themselves. , , Cells are the basic structural unit of all living organisms.Cells are the basic structural unit of all living organisms. , , All cells that make up an organism are similar to each other.All cells that make up an organism are similar to each other. , , Some cells can burn food molecules to release energy, but some cannot.
Answers
Answer:
Cells are the basic structural unit of all living organisms.
Explanation:
Hope this helps, but i'm unsure if it would be multiple choice or not.
What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answers
Answer:
you did not give the specific heat like formula like it takes 1kj to raise 28grams of water by 10 grams
Infrared waves travel at a speed of 3.00 x 10^8 m/s. What is the frequency of an infrared wave
that has a vacuum wavelength of 5.5 micrometers?
(1 micrometer= 1x10^-6 m)
O 5.5 X 10^12 Hz
O 5.5 x 10^10 Hz
O 5.5 X 10^11 Hz
O 5.5 X 10^13 Hz
Answers
The frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
The given parameters;
speed of the wave, v = 3 x 10⁸ m/swavelength of the wave, λ = 5.5 μmThe frequency of the infrared wave is calculated by using wave equation as shown below;
v = fλ
where;
f is the frequency of the wave[tex]f = \frac{v}{\lambda} \\\\f = \frac{3\times 10^8}{5.5 \times 10^{-6}} \\\\f = 5.5 \times 10^{13} \ Hz[/tex]
Thus, the frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
Learn more here:https://brainly.com/question/18477700
Convert 1.56x10^30 particles of sodium chloride to grams of sodium chloride
Answers
Answer:
I cannot tell yet
Explanation:
I don't take that class yet but ill get back to you
2. What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answers
Answer:
Q = mcT ...you can either substitute the molar heat capacity of water in the place of c or the specific heat capacity of water.
Explanation:
1. (8.5d) A compound has a formula Mg:(PO.). Which best describes the atoms that make up this compound?
A.
B.
Atom
Magnesium (Mg)
phosphorus (0)
Oxygen (0)
Number
2
1
4
Atom
Magnesium (Mg)
Phosphorus (P)
Oxygen (0)
Number
6
2
8
C.
Atom
Magnesium (M)
Phosphorus (2)
Oxygen (0)
Number
3
4
2
D.
Atom
Magnesium (Mg)
Phosphorus (P)
Oxygen (0)
Number
3
2
8
Answers
Answer:(8.5d) A compound has a formula Mg:(PO.). Which best describes the atoms that make up this compound? A. B. Atom Magnesium (Mg) phosphorus (0) Oxygen (0)
Explanation:
275 KJ of energy was transferred to water at 15c. Calculate the mass of water that can be brought to its boiling point
Answers
Answer:
need points rn sorry bro hope u get ur answer
Explanation:
Which type of dry-chemical fixed application method introduces a concentration of agent into a closed area
Answers
Actuating mechanism is the dry-chemical fixed application method which
introduces a concentration of agent into a closed area.
The actuating mechanism is commonly used in piping systems and
involves the transport of a control member in automatic or remote control
systems.
The closed system makes manual navigation very difficult which is why the
actuating mechanism in automatic systems are usually used to make it less
tedious and accurate.
Read more on https://brainly.com/question/19914723
