HELP me plzzzzzzzzzzzzzzzzz

hope it helps you......

Answer:

D

Explanation:

Answer:

C they have different frames of reference

Explanation:

If a cell is placed in an isotonic solution, there will be no net flow of water into or out of the cell, and the cell's volume will remain stable. If the solute concentration outside the cell is the same as inside the cell, and the solutes cannot cross the membrane, then that solution is isotonic to the cell.

Answer:

Hence the name of the compound is vanadium (III) sulfide

The chemical symbol for the vanadium(III) sulfide compound is [tex]V_2S_3[/tex]. In this chemical, vanadium (V) is found in +3 oxidation state and sulfur (S) is found in the form of sulphide ions.

The compound contains two vanadium ions, as indicated by the numerical prefix "di-" before the element symbol V. An inorganic compound having a crystal structure that produces a solid is called vanadium(III) sulfide.

It is composed of sulfide anions and vanadium cations arranged in a certain way. Vanadium(III) sulfide has many uses in various industries. It can be used as a catalyst in chemical reactions, as part of some types of batteries, and as a raw material for batteries to produce ceramics and materials with specific electrical and magnetic properties.

Learn more about anions and cations, here:

https://brainly.com/question/7337039

#SPJ6

Answer:

1. There most not be rotation within the molecule.

2. Two non identical group must be present in the double bonded carbon atom.

Explanation:

This is because cis/ trans isomerism are that exhibit different structural configurations where the atoms are spartially arranged. They are also refered to as geometric isomers. They cannot be interconverted at room temperature because it requires the bonds to be broken and restructured.

Cis shows that the functional groups on present in the same side which trans isomerism show that the functional groups are on opposite sides.

Why can gases and liquids be paired but not solids?

The atoms and molecules in gases are much more spread out than in solids or liquids. They vibrate and move freely at high speeds. A gas will fill any container, but if the container is not sealed, the gas will escape. Gas can be compressed much more easily than a liquid or solid.

Answer:

A precipitation is answer

Answer:

D. liquid

Explanation:

Matter, which is any substance that has weight and occupies space, can exists in three states namely: solid, liquid and gaseous. In this question, water is being described as matter.

According to this question, a sample of water of volume 2litres is shaped like a cylinder in one container and shaped like a rectangle in another larger container. Based on this observation, the water sample is in a LIQUID STATE because a liquid has no indefinite shape but takes the shape of its container.

Hence, this water sample, takes the shape of its cylindrical container in the first scenario and shape of its rectangular container in the second scenario.

Answer:

Not affected.

Explanation:

Kinetic energy of the dominoes not affected if the first domino did not hit the second one because no kinetic energy is lost due to no collision. If the first domino hit the second one, its kinetic energy decreases and changes in other form of energy such as heat and sound energy etc. But when there is no collision occur, then there is no change in the kinetic energy of dominoes.

Answer:

B. Indicator

Explanation:

An indicator is used to determine whether an acid or alkali has been added to a solution.

An acid or alkali changes the hydrogen ion concentration in solution. This is indicated by the pH of the solution after which the acid or alkali has been added.

Answer:

1. Oceans -> Atmosphere = Evaporation

2. Atmosphere -> Clouds = Condensation

3. Cloud -> Snow = Freezing

4. Glacier -> River = Melting

5. Cloud -> Soil = Precipitation

Explanation

1. When liquid water is heated by the sun it evaporates into the atmosphere

2. When the saturated air cools down in the atmosphere, Water vapor condenses into tiny droplets to form a cloud

3. When the Temp is below freezing, water droplets crystalize into snow flakes.

4. Glaciers melt into the River

5. The cloud precips into soil

the other person got it really wrong.

A, B, C, D, and E would be evaporation, condensation, freezing, melting, and precipitation respectively

More on cloud formation can be found here: https://brainly.com/question/1242352?referrer=searchResults

Answer:

a) 4

b) 2

c) 5

d) 2

e) 4

f) 3

Explanation:

The complete question is shown in the image attached to this answer.

We know that the shorter the wavelength, the greater the energy. The greatest energy and shortest wavelength among the emission lines is 4.

Applying the same argument as above, the greatest energy catapults the electron from energy level n=1 to n=4. This will corresponds to the shortest wavelength since energy is inversely proportional to wavelength.  

Frequency is also inversely related to wavelength for two waves travelling at the same speed. Hence, the transition that corresponds to the highest energy and shortest wavelength in the emission spectrum will have the highest frequency.

The emission line with the lowest energy occurs when the electron moves from n=2 to n=1.

The ionization energy is the energy required to remove an electron from the hydrogen atom. It corresponds to the transition n=1 to n=∞

Answer:

One possible answer could be lemon juice

Explanation:

We had to do a water test, and I was looking up what pH levels were. Then I learned about it in school, so I know a thing or two about it :)

Possible other answers include stomach acid and cola.

Hope this helps!!

Answer:

plants

Explanation:

because it produces ( i am a third grade student and don't know if it is right or not)

Answer:

C3H8 + 5O2 ‐‐‐‐‐‐‐‐> 4H2O + 3CO2

Answer:

Here's the Sample Response: The reactants and products determine the type of chemical reaction. If there are more products than reactants, then it is a decomposition reaction. If there are more reactants than products, it is a synthesis reaction. If oxygen is a part of the reactant, it is a combustion reaction. If one ion replaces another, it is a single replacement reaction. If there are two compounds in a reactant where cations switch, it is a double replacement reaction.

Explanation:

Answer:

1.807×10and at the top of ten put -24

Answer:

All ions must a overall charge

Explanation:

Answer:

i belive its B

Explanation:

The heat produced from 48 g Aluminium = -578

Given

Reaction

2 Al + 3 CuSO4 → 3 Cu + Al2(SO4)3 ∆H = -680 kJ

48 g of Aluminum

Required

Heat released

Solution

mol of Aluminium = mass : Ar Al

mol = 48 g : 27 g/mol

mol = 1.78

From the reaction, heat released for 2 moles Al, so for 1.78 Al, the heat released :

[tex]\tt \dfrac{1.7}{2}\times -680~kJ=-578~kJ[/tex]

Answer: a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.

Explanation: definition

Answer:

Reflection

Explanation:

The light from Earth's surface, reflected back towards the Moon, can illuminate it all the same. This is why, when the Moon is in a crescent phase, you can still see features on the dark portion of the Moon: we call this reflected, illuminating light the phenomenon of Earthshine.

0.042 moles of Hydrogen evolved

Given

I = 1.5 A

t = 1.5 hr = 5400 s

Required

Number of Hydrogen evolved

Solution

Electrolysis of water ⇒ decomposition reaction of water into Oxygen and Hydrogen gas.

Cathode(reduction-negative pole) : 2H₂O(l)+2e⁻ ⇒ H₂(g)+2OH⁻(aq)

Anode(oxidation-positive pole) : 2H₂O(l)⇒O₂(g)+4H⁻(aq)+4e⁻

Total reaction : 2H₂O(l)⇒2H₂(g)+O₂(g)

So at the cathode H₂ gas is produced

Faraday : 1 mole of electrons (e⁻) contains a charge of 96,500 C

[tex]\tt mol~e^-=\dfrac{Q}{96500}[/tex]

Q = i.t

Q = 1.5 x 5400

Q = 8100 C

mol e⁻ = 8100 : 96500 = 0.084

From equation at cathode , mol ratio e⁻ : H₂ = 2 : 1, so mol H₂ = 0.042

Answer:

B. None of these

Explanation:

Answer:

[tex]h=12.9cm[/tex]

Explanation:

Hello!

In this case, since we can consider the beaker until the 100-mL mark as a cylinder, we can use the following equation to relate its diameter, vertical distance or height and volume:

[tex]V=\pi h\frac{d^2}{4}[/tex]

Thus, since we know the diameter, volume (which is equivalent to 600 cm³) and π, we can plug in to obtain:

[tex]600cm^3=\pi *h*\frac{(77.0mm)^2}{4}[/tex]

It means it is necessary to take the mm to cm and solve for h:

[tex]h=\frac{600cm^3}{\pi*\frac{(7.70cm)^2}{4}} \\\\h=12.9cm[/tex]

Best regards!

The distance between each 100 mL mark is 2.15 cm.

The volume of a cylinder is obtained using the formula;

V = πr^2h

Now, we have the following information;

Volume of the cylinder = 600. mL or 600 cm^3

Diameter of the cylinder = 77 mm or 7.7 cm

Radius of the cylinder = 7.7/2 = 3.85 cm

Height of the cylinder  = h

Hence;

600 = 3.142 × ( 3.85 )^2 × h

h = 600/3.142 × ( 3.85 )^2

h = 12.88 cm

There are six 100 mL marks on the beaker, the distance between each 100 mL mark =  12.88 cm/6 = 2.15 cm

Learn more about volume: https://brainly.com/question/12748872

The equations that show a precipitation reaction would be [tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex], [tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex], and [tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex]

It is a reaction in which two soluble salts react in aqueous solutions to form one soluble and one insoluble salt.

Thus, all the equations with an insoluble salt as one of the products will qualify as precipitation reactions. The insoluble is designated as (s).

Hence, the following are precipitation reactions:

More on precipitation reactions can be found here: https://brainly.com/question/24158764

#SPJ2

Answer:

the effects that the scientists are causing by manipulating varuables

Answer:

Converting Grams to Moles of an Element and Vice Versa.

We can convert back and forth between grams of an element and moles.

The conversion factor for this is the molar mass of the substance. The molar mass is the ratio giving the number of grams for each one mole of the substance

molar mass is the factor

Grams can be converted to moles and vice versa so the conversion factor which is used for this is molar mass.

Mass of any substance will be converted into moles by using the below equation:

n = W/M, where

n = moles

W = given mass

M = molar mass

By using the above formula we can convert the mass of any object to moles and moles to mass.

Hence conversion factor which is used for this is molar mass(M).

To know more about mass & moles, visit the below link:

https://brainly.com/question/24639749

#SPJ2

Answer:

erosion.

Explanation: