1. 55 grams of salt are added to 100 L of water to make a saline solution.
What is the g/L concentration of the aqueous solution?
Show your work!
Answer:
0.55g/L
Explanation:
Given parameters;
Mass of salt = 55g
Volume of water = 100L
Unknown:
g/L concentration = ?
Solution:
To solve this problem, we must understand that concentration is the amount of solute per solution
g/L concentration = [tex]\frac{55}{100}[/tex] = 0.55g/L
How many grams are in 3.00 x 10^24 molecules of Zn(C2H3O2)2?
Answer:
Mass = 917.4 g
Explanation:
Given data:
Number of molecules = 3.00 ×10²⁴ molecules
Mass in gram = ?
Solution:
1 mole contain 6.022 × 10²³ molecules
3.00 ×10²⁴ molecules × 1 mol / 6.022 × 10²³ molecules
0.5×10¹ mol
5 mol
Mass in gram:
Mass = number of moles × molar mass
Mass = 5 mol × 183.48 g/mol
Mass = 917.4 g
. The kidneys are _______________ to the liver.
a. Dorsal
b. Ventral
c. Medial
d. Superior
Can someone answer ASAP if you hurry I will mark brainliest
Answer:
Electrical and magnetic
You exert a gravitational force on the pupil and the pupil exerts an equal gravitational force on you. ... The size of the gravitational force depends on the mass of the objects involved. The greater the mass, the greater the gravitational force.
Explanation:
a sample of methane gas at a pressure of 0.727 atm and a temperature of 26.9 occupies a volume of 726 ml. if the gas is allowed to expand at constant temperature until its pressure is 0.412 atm, the volume of the gas sample will be _ mL
Answer:
1280L
Explanation:
Given parameters:
Initial pressure = 0.727atm
Temperature = 26.9°C
Initial volume = 726mL = 0.726L
New pressure = 0.412atm
Unknown:
New volume of the gas sample = ?
Solution:
To solve this problem, we apply boyles law;
P1V1 = P2V2
P and V are pressure and temperature
1 and 2 are initial and new state
0.727 x 0.726 = 0.412 x V2
V2 = 1.28mL = 1280L
Give the name of one of the 3 common acids used in chemistry
Answer:
Common strong acids include hydrochloric acid, sulfuric acid, phosphoric acid, and nitric acid. Common weak acids include acetic acid, boric acid, hydrofluoric acid, oxalic acid, citric acid, and carbonic acid.
Between carbon and silicon, which element has the strongest attraction between its nucleus and its valence electrons? Explain?
Answer:
Between carbon and silicon, silicon element has the strongest attraction between its nucleus and its valence electrons.
because silicon's nucleus is bigger than carbon.silicon loses electrons easily than carbon.
How much energy is required to melt 2 kg of copper? Use the table below and
this equation: Q = mLfusion
A. 125.6 kJ
B. 9460 kJ
C. 414 kJ
D. 4730 kJ
Answer:
C. 414 kJ
Explanation:
Given parameters:
Mass of copper = 2kg
Unknown:
Amount of energy required to melt the copper = ?
Solution:
To solve this problem, we use:
Q = m L
m is the mass
L is the latent heat of fusion of copper = 207kJ/kg
So;
Q = 2 x 207 = 414kJ
If you were to descend through the ocean in a submersible, what changes in the ocean water could you observe?
Answer:
it would become darker. there would be a higher level of water pressure. and there would be less animals, or different alimals.
What is the product(s) in the reaction below?
Answer:
imma go with the answer B
The product in the reaction [tex]\rm Zn + 2HCl \rightarrow[/tex] is [tex]\rm ZnCl_2 + H_2[/tex]. The correct answer is option D.
A reaction is a process that involves the transformation of one or more substances into one or more different substances.
The reaction between zinc (Zn) and hydrochloric acid (HCl) is a classic example of a single displacement reaction. In this reaction, zinc reacts with hydrochloric acid to produce zinc chloride ([tex]\rm ZnCl_2[/tex]) and hydrogen gas ([tex]\rm H_2[/tex]).
The balanced chemical equation for this reaction is:
[tex]\rm Zn(s) + 2HCl(aq) \rightarrow ZnCl_2(aq) + H_2(g)[/tex]
Therefore, the product of the reaction between zinc and hydrochloric acid is zinc chloride ([tex]\rm ZnCl_2[/tex]) and hydrogen gas ([tex]\rm H_2[/tex]). Option D is the correct answer.
Learn more about reaction here:
https://brainly.com/question/16737295
#SPJ6
what two types of evidence are used to classify organisms. Which animal shares the most traits with humans and do both lemurs and humans have the trait listed at Point D explain?
Explanation:
6.The main pieces of evidence that scientists use to classify organisms are essentially form and evolutionary relationships.
9. chimpanzee
10. The answer is no, lemurs are not bipedal, i.e, they don't use two legs for walking like human do and they don't have language like ours.
In _____ , materials move from an area of higher concentration to an area of lower concentration through a cell membrane.
1.selective permeability
2.active transport
3.passive transport
PLS HELP THIS IS DUE TODAY!!
Answer:
I think it would be Yellow
Brianna explains to Logan the role of plants in the carbon cycle. Choose the sentence(s) that she includes in her explanation. Select all that apply.
A.
Animals get carbon from plants.
B.
Plants take carbon from the soil.
C.
Photosynthesis uses carbon monoxide.
D.
Animals take carbon from the atmosphere.
E.
Plants take carbon from the atmosphere.
Answer:
E) Plants take carbon from the atmosphere
Explanation:
Plants are a vital part in keeping the air clean. They take in CO2, H2O, and sunlight to start processing photosynthesis. The carbon taken in by the plant still remains with it after it dies, thus, fossil fuels.
Answer:
e is correct
Explanation:
A chemist is studying the properties of a gas under various conditions. He observes that when the gas is at room temperature and low pressure, it behaves as an ideal gas. When the gas is cooled to 10 kelvin and is placed under high pressure, however, it deviates significantly from an ideal gas. Explain these observations
Answer:
An ideal gas is a theoretical concept and a real gas behaves in an ideal manner under conditions which includes a high temperature and a low pressure such that the gas has high kinetic energy, and the intermolecular forces between the molecules are weak
The Ideal Gas Law is P·V = n·R·T
Where;
P = The pressure of the gas
V = The volume of the gas
n = The number of moles of the gas
R = The Universal Gas Constant
T = The temperature of the gas
For a gas cooled to 10 Kelvin and placed under high pressure, the interaction between individual gas molecules increases, and the kinetic energy of the gases is much lower and more comparable to the inter molecular forces between the gas molecules, which in turn produces observable changes from the initial ideal behavior of the gas such that the gas behavior deviates from the Ideal Gas Laws appreciably and are better modelled by the Van der Waals Equations which takes into account, the volume the gas particles occupy and the intermolecular forces between the molecules
The Van der Waals equation is presented as follows;
[tex]P = \dfrac{R \cdot T}{V - b} - \dfrac{a}{V^2}[/tex]
Where;
V = The molar volume
a = The gas constant a represents the attractive forces between the gas particles
b = Represent the volume occupied by the particles of the gas
Explanation:
Answer: A, B, & C
Explanation:
A. The ideal gas model assumes that gas particles experience no intermolecular attractions and these forces cause the gas to deviate from ideal behavior.
B. At very low temperatures, gas particles move slowly.
C. At very high pressures, gas particles are very close together.
Got it right on edge :)
Can somebody Please Help
Answer:
5425440 μm
Explanation:
From the question given above,
Length (in ft) = 17.8 ft
Length (in μm) =?
Next, we shall convert 17.8 ft to in. This can be obtained as follow:
1 ft = 12 in
Therefore,
17.8 ft = 17.8 ft × 12 in / 1 ft
17.8 ft = 213.6 in
Next, we shall convert 213.6 in to cm. This can be obtained as follow:
1 in = 2.54 cm
Therefore,
213.6 in = 213.6 in × 2.54 / 1 in
213.6 in = 542.544 cm
Finally, we shall convert 542.544 cm to μm. This can be obtained as follow:
1 cm = 10⁴ μm
Therefore,
542.544 cm = 542.544 cm × 10⁴ μm / 1 cm
542.544 cm = 5425440 μm
Therefore, 17.8 ft is equivalent is equivalent to 5425440 μm
can someone please help me, i'll give you a 5 star rating and brainliest answer
pleae help me I'm so confused
What is the velocity of a person that runs 40 km in 100 hours?
Answer:
0.4 km/h velocity is also the direction their going, in this case the person, that I'll name billy bob joe, is going in so yeh
Explanation:
give me brainliest?
Write the name for the IONIC compound that contains two aluminum atoms and three sulfur atoms. (Need help ASAP)
How many moles are in 9.07 x 10^23 atoms of sodium chloride?
Answer:
1.5 moles of sodium chloride are present.
Explanation:
Given data:
Number of moles of sodium chloride = ?
Number of atoms of sodium chloride = 9.07×10²³
Solution:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
9.07×10²³ atoms × 1 mol / 6.022 × 10²³ atoms
1.5 moles of sodium chloride are present.
what is the difference between polar and non-polar
Answer:
Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.
Explanation:
Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.
how does a diaphragm help in viewing the specimen in a microscope
Answer:
Diaphragm controls the amount of light reaching the specimen. It is located above the condenser and below the stage. Most high quality microscopes include an Abbe condenser with an iris diaphragm. Combined, they control both the focus and quantity of light applied to the specimen.
Why do scientist use the scientific method
Answer:
B
Explanation:
scientists always look for evidence
Answer:
Yea its B
Explanation: The person above me legit toke the answer out of my mouth
PLZ HELP!!!!!asapnow
Answer:
Friction of wind against the ocean surface
What causes the wind and weather on earth plz help
The substance that cannot be broken down into a simpler form by ordinary chemical means is called a __ ?
Answer:
Elements
Explanation:
An element is any substance that cannot be broken down into simpler form by ordinary chemical means.
Elements are distinct substances that cannot be split up into simpler substances. .
Such substances consist of only one kind of atom. There are over hundred elements known till date. Elements are made up of unique atoms. In a chemical reaction, elements combines and rearranges.
Calculate the molar mass of NaNO3-
Lucy volunteers at an animal shelter, and she takes care of an orange tabby 1 point
cat and her kittens. Some of the kittens have orange markings, but some
have gray markings. What units of genetic material determine how living
things look?
Answer; the answer is variations
The unit of genetic material that determines how living things look is called variations, look below for more description.
What are genetic variations?Hereditary variety alludes to contrasts among the genomes of individuals from similar species. A genome is all the innate data — every one of the qualities — of a creature. Hereditary variety is the distinction in DNA successions between people inside a populace.
For example, the human genome contains somewhere close to twenty and 25 thousand qualities.
Find more information about Genetic variations here:
brainly.com/question/14926046
How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?
1 mol of oxygen has fewer molecules.
1 mol of oxygen has more molecules.
Each sample has the same number of molecules.
The molecules cannot be compared without knowing the mass.
Answer:
Each sample has the same number of molecules.
Explanation:
Just took the quiz on edge 2021
Taking into account the definition of Avogadro's number, each sample has the same number of molecules.
Avogadro's NumberAvogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole.
Avogadro's number applies to any substance.
This caseAvogadro's number applies to any substance. This means that the number of molecules in 1 mol of oxygen is equal to the number of molecules in 1 mol of nitrogen.
Finally, the correct answer is the third option: each sample has the same number of molecules.
Learn more about Avogadro's Number:
brainly.com/question/1445383
brainly.com/question/1528951
i really need help with this question can you guys help me