Answer:
Charles Robert Drawin was an English naturalist,Geologist and Biologist, Best known for his contributions to the science of evolution. His proposition that all species of life have descended from common ancestors is now widely accepted and considered a fundamental concept in science!
An airplane flying at 116 m/s. E, is accelerated uniformly at the rate of 9.2 m/s2, E, for 13 s. What is its final velocity in m/s?
Answer:
235.6m/s
Explanation:
you have to use one of the kinematic formulas the best that suits the question given in this case you can use v=u+at.since the time, acceleration and initial velocity have been given in the question
v=116+(9.2)13^2
v=116+119.6
=235.6m/s
I hope this helps
why is it important to have regular super vision of the weights and the measurements in the market?
Answer:
Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.
Explanation:
In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)
Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude
Let F₁ and F₂ denote the two forces, and R the resultant force.
F₁ and F₂ point perpendicularly to one another, so their dot product is
F₁ • F₂ = 0
We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that
F₁ • R = ||F₁|| ||R|| cos(30°)
But we also have
F₁ • R = F₁ • (F₁ + F₂) = (F₁ • F₁) + (F₁ • F₂) = F₁ • F₁ = ||F₁||²
So, knowing that ||R|| = 100 N, we get that
(100 N) ||F₁|| cos(30°) = ||F₁||²
(100 N) cos(30°) = ||F₁||
||F₁|| ≈ 86.6 N
(And the same would be true for F₂.)
Pls help me with this fast. I will mark brainiest
Answer:
a) 70, 95
b) 95-70= 25cc
c) density= mass/volume
102/25
=4.08g/cc
Why is velocity proportial to pressure?
Answer:
Pressure and velocity are inversely proportional to each other because if pressure increase, the velocity decrease to keep the algebraic sum of potential energy, kinetic energy and pressure constant.
Can acceleration and velocity be equal vectors?
Answer:
Velocity is the rate of change of position with respect to time, whereas acceleration is the rate of change of velocity. Both are vector quantities (and so also have a specified direction), but the units of velocity are meters per second while the units of acceleration are meters per second squared.
What do is mean by environment friendly behaviour?
Why does the weight of a body differ on different celestial bodies of the universe?
pls someone help me pls…. and pls explain to me how
Answer:
1.12 × 10⁴ m/s
Explanation:
The escape velocity of the object v = √(2GM/R) where G = gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of the Earth = 6 × 10²⁴ kg and R = radius of the Earth = 6.4 × 10⁶ m
Since v = √(2GM/R)
Substituting the values of the variables into the equation, we have
v = √(2GM/R)
v = √(2 × 6.67 × 10⁻¹¹ Nm²/kg² × 6 × 10²⁴ kg/6.4 × 10⁶ m)
v = √(13.34 × 10⁻¹¹ Nm²/kg² × 6 × 10²⁴ kg/6.4 × 10⁶ m)
v = √(80.04 × 10⁻¹¹ × 10²⁴Nm²/kg/6.4 × 10⁶ m)
v = √(80.04 × 10¹³Nm²/kg ÷ 6.4 × 10⁶ m)
v = √(80.04 ÷ 6.4 × 10¹³ ÷ 10⁶Nm/kg)
v = √(12.50625 × 10⁷ Nm/kg)
v = √(125.0625 × 10⁶ Nm/kg)
v = 11.18 × 10³ m/s
v = 1.118 × 10 × 10³ m/s
v = 1.118 × 10⁴ m/s
v ≅ 1.12 × 10⁴ m/s
define one standard kg
Answer:
The mass of platinum iridium rod whose diameter and height are equal an kept at international bureau of weight and measurement in Paris of France is called as one standard kg.
if the radius of a coin is 1 cm then calculate its area.
Answer:
3.14*1²
3.14 cm²
I hope this will help
Answer:
3.14 cm squared
Explanation:
I hope this will help.
What is an effect of continental drift?
Answer: An effect of continental drift is causing tectonic plates resting upon the convecting mantle to move which results in natural disasters like earthquakes, volcanic eruptions, and more.
Please help
25 Points
What Mathematical leads to the formulas for the magnitudes of displacement, velocity, and acceleration?
Answer:
displacement=specific distance
*Velocity=∆displacement/time
*acceleration=∆velocity/time
Solve the following numerical problems. a) A load of 400N is lifted up by an effort of 100N. If load distance is 20cm, what will be the effort distance? (Ans: 80cm) b) Two boys, Shrijan having weight 600N and Shrijesh having weight 300N are playing see-saw. If Shrijan is sitting at 2m from fulcrum, where should Shrijesh sit from fulcrum to balance Shrijan?(Ans: 4m) c) A lever of length 1m has been used ttoko lift a load of 600N by applying an effort of 200N. If load is at 20cm from fulcrum, calculate mechanical advantage, velocity ratio and efficiency. (Ans: MA = 3, VR = 4, n=75%) d) Study the figure below and find the value of effort. (Ans: 120N) Muyn) 2.5m 600N 0.5m ? Science and Enyin
Answer:
given,
load = 400 N
effort = 100 N
load distance = 20 cm
we know that ,
E*Ed = L*Ld
=100 N* Ed = 400N * 20 cm
=100N * Ed = 8000N/cm
= Ed =( 8000N/cm ) / 100N
= Ed = 80 cm
b. soln.
given,
load = 600 N
load distance = 2 m
effort = 300 N
effort distance = ?
we know that ,
= E *Ed = L * Ld
= 300N * Ed = 600N * 2 m
= 300N * Ed = 1200N/m
=Ed =( 1200N/m ) / 300 N
= Ed = 4 m
C. soln.
given,
load = 600 N
load distance =20 cm
effort = 200 N
effort distance = ?
M.A = ?
V.R = ?
Efficiency = ?
we know that ,
= E *Ed = L *Ld
= 200N * Ed = 600 N * 20 cm
=200 N *Ed = 12000 N/cm
=Ed = ( 12000 N/cm) / 200 N
= Ed = 60 cm
Also,
M.A = load / effort
=600 N / 200 N
= 3
V.R = Ed/ Ld
= 60 cm / 20 cm
= 4
efficiency = ( M.A / V.R ) 100 %
= ( 3 / 4 ) 100%
= 75 %
d. soln.
given,
load = 600 N
load distance = 0.5 m
effort distance = 2.5 m
effort = ?
we know that ,
= E * Ed = L * Ld
= E * 2.5 m = 600 N * 0.5 m
= E * 2.5 m = 300 N / m
= E = ( 300 N / m ) / 2.5 m
= E = 120 N
What's an area of the earth that suggest that " the Earth is like one giant jigsaw" idea could be true.
4 A student says that he has made a magnetic field with some iron filings. What would
you say to him?
Answer:
Yes but no
Explanation:
Here the kid cant say that he has created s magnetic field as iron fillings do not have magnetic properties
Which of the elements below have seven electrons in their outermost energy levels? A.) Cr, Mn, and Fe B.) Br, I, and Ci C.) O, S, and Se D.) He, Ne, and Ar
Answer:
B
Explanation:
the Halogen families have 7 valence electrons
7 (a) Smoke particles are introduced into a glass box containing air. Light shines into the box so that, when observed through a microscope, the smoke particles can be seen as bright points of light. Describe the motion of the smoke particles and account for this motion in terms of the air molecules.
Answer:
smoke particles move in brownian motion (zig -zag motion ) .
Explanation:
this is because air molecules collide against smoke particles hence they attain kinetic energy which keeps them in continuous motion .
The motion of the smoke particles is Brownian motion that is the zigzag motion of the particles that particles move in a random direction.
What is a Brownian Movement?In chemistry, the term "Brownian Movement" refers to the random zigzagging motion of a particle that is typically seen under a high power ultra-microscope. The term "Brownian movement" refers to the exact motion of pollen grains in water, as described by Robert Brown.
More crucially, Albert Einstein eventually clarified the Brownian movement in his study by claiming that water molecules were responsible for moving the pollen. This discovery provided compelling proof that atoms and molecules exist.
According to the question, the reason is that air molecules collide against smoke particles, hence the particles get kinetic energy which keeps them in continuous motion or in zigzag motion.
To get more information about Brownian Movement :
https://brainly.com/question/20350065
#SPJ2
Multi-part question If a galaxy moving away from the Earth has a speed of 1000 km/s and emits 656 nm light characteristic of hydrogen (the most common element in the universe). What wavelength would we observe on the Earth
Answer:
658.2 nm
Explanation:
Since the galaxy is moving at relavitistic speed, we use the equation for relativistic Doppler shift of light.
So, the wavelength of light observed on the Earth is λ
λ = λ'([tex]\sqrt{\frac{ 1 + \frac{v}{c} }{1 - \frac{v}{c} } }[/tex])
where λ' = wavelength of light emitted by galaxy = 656 nm, v = speed of galaxy = 1000 km/s (positive since the galaxy is moving away from the Earth) and c = speed of light = 300000 km/s
So, substituting the values of the variables into the equation, we have
λ = λ'(√[{1 + (v/c)}/(1 - (v/c)]
λ = 656 nm(√[{1 + (1000 km/s/300000 km/s)}/(1 - (1000 km/s/300000 km/s)]
λ = 656 nm(√[{1 + 1/300}/(1 - 1/300]
λ = 656 nm(√[{(300 + 1)/300}/{(300 - 1)/300}]
λ = 656 nm(√[{(301)/300}/{(299)/300}]
λ = 656 nm(√[301/299])
λ = 656 nm(√1.0067)
λ = 656 nm × 1.0033
λ = 658.19 nm
λ ≅ 658.2 nm
So, the wavelength observed on Earth is 658.2 nm
Un auto se desplaza por una carretera recta a una velocidad de 85 km/h. Al cabo de 2 horas, ¿qué distancia habrá recorrido, en metros?
Answer:
Distancia, D = 170,000 metros
Explanation:
Dados los siguientes datos;
Velocidad = 85 km/h Tiempo = 2 horasPara encontrar la distancia recorrida, en metros;
Matemáticamente, la distancia recorrida por un objeto se calcula mediante la fórmula;
Distancia = velocidad * tiempo
Sustituyendo los valores en la fórmula, tenemos;
Distancia = 85 * 2
Distancia = 170 kilómetros
A continuación, convertiríamos el valor en kilómetros a metros;
Conversión:
1 kilómetros = 1000 metros
170 kilómetros = D metros
Multiplicación cruzada, tenemos;
D = 170 * 1000
D = 170,000 metros
Por lo tanto, habría viajado 170,000 metros después de 2 horas.
i. The lift raises a car to a height of 1.8 m using a force of 5500 N. How much work does the lift
perform? (1 point)
Work = force x distance
Work = 5500 x 1.8
Work = 9900 N
The work measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is applied in the direction of the displacement.
Work = force x distance
Work = 5500 x 1.8
Work = 9900 N
therefore, work does 9900 N
What is work?Work is force applied over distance. Examples of work include lifting an object against the Earth's gravitation, driving a car up a hill, and pulling down a captive helium balloon. Work is a mechanical manifestation of energy. The standard unit of work is the joule (J), equivalent to a newton - meter (N · m).
What is work and energy?Work is defined as transferring energy into an object so that there is some displacement. Energy is defined as the ability to do work. Work done is always the same. Energy can be of different types such as kinetic and potential energy.
To learn more about work, refer
https://brainly.com/question/19987285
#SPJ2
A train travels 600 kilometers in 1 hour. What is the train's velocity in meters/second?
here's the answer to your question
In nonequilibrium, total counterclockwise moments = total clockwise moments. *True False
Answer:
[tex]{ \bf{false}}[/tex]
Explanation:
Because it breaks the law of moments.
A certain superconducting magnet in the form of a solenoid of length 0.28 m can generate a magnetic field of 7.0 T in its core when its coils carry a current of 80 A. The windings, made of a niobium-titanium alloy, must be cooled to 4.2 K. Find the number of turns in the solenoid.
Answer:
The number of turns in the solenoid is 19506.
Explanation:
Length of solenoid, L = 0.28 m
Magnetic field, B = 7 T
Current, I = 80 A
Let the number of turns is N.
The formula used to find the magnetic field is
[tex]B = \frac{\mu 0N I}{L}\\\\7 = \frac{4 \times 3.14\times 10^{-7}\times N\times 80}{0.28}\\\\N = 19506[/tex]
Calculate the efficiency of the following appliances:
1. A radiator that converts 1000) of electrical energy into 900J
of heat energy and 100J of light energy
2. A torch that converts 100J of chemical energy into 35) of
light energy and 65J of heat energy
3. A car that converts 10,000J of chemical energy into 6000) of
kinetic energy and 4000J of heat energy.
4. An energy saver light converts 1,000J of electrical energy
into 7003 of light energy and 300J of heat energy.
5. A speaker converts 100J of electrical energy into 50J of
sound energy and 50J of heat and kinetic energy.
we
Answer:
1. The efficiency of the radiator is 90 %
2. The efficiency of the torch is 65 %
3. The efficiency of the car is 40 %
4. The efficiency of the energy saver is 70 %
5. The efficiency of the speaker is 50 %
Explanation:
Efficiency = (Useful energy out ÷ Total energy in) × 100 J
1. Useful energy = 900 J
The total energy in = 1000 J
The efficiency of the radiator = ((900 J)/(1,000 J)) × 100 % = 90 %
2. Useful energy = 65 J
The total energy in = 100 J
The efficiency of the torch = ((65 J)/(100 J)) × 100 % = 65 %
3. Useful energy = 4,000 J
The total energy in = 10,000 J
The efficiency of the car = ((4,000 J)/(10,000 J)) × 100 % = 40 %
4. Useful energy = 700 J
The total energy in = 1,000 J
The efficiency of the energy saver = ((700 J)/(1,000 J)) × 100 % = 70 %
5. Useful energy = 50 J
The total energy in = 100 J
The efficiency of the speaker = ((50 J)/(100 J)) × 100 % = 50 %
Which of the globes in Figure 7.9 will light up?
steel wire 8m long and 4mm in diameter is fixed to two rigid b. [1] supports. Calculate the increase in tension when the temperature falls by 10°C. Given linear expansivity of steel, a 12x10 %/K, Young's modulus for steel, Y = 2x10¹¹ N/m².
Answer:
301.6 N
Explanation:
The length of the wire L₀ = 8 m and its diameter, d = 4 mm = 4 × 10⁻³ m. Since its temperature drops by 10°C, it will have a change in length ΔL = L₀αΔθ where α = linear expansivity of steel, a 12 × 10⁻⁶ /K, and Δθ = temperature change = -10°C = -10 K(negative since it is a drop)
So, the strain, ε = ΔL/L₀ = αΔθ = 12 × 10⁻⁶ /K × 10 K = 12 × 10⁻⁵
Now the Young's modulus of steel, Y = σ/ε where σ = stress = T/A where T = increase in tension in steel wire and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 4 × 10⁻³ m and ε = strain = 12 × 10⁻⁵
So, σ = Yε
Since Y = 2 × 10¹¹ N/m².
Substituting the values of the variables into the equation, we have
σ = Yε
σ = 2 × 10¹¹ N/m² × 12 × 10⁻⁵
σ = 24 × 10⁶ N/m²
Since σ = T/A
T = σA
T = σπd²/4
Substituting the values of the variables into the equation, we have
T = σπd²/4
T = 24 × 10⁶ N/m² × π × (4 × 10⁻³ m)²/4
T = 24 × 10⁶ N/m² × π × 16 × 10⁻⁶ m²/4
T = 24 × 10⁶ N/m² × π × 4 × 10⁻⁶ m²
T = 96 N × π
T = 301.59 N
T ≅ 301.6 N
So, the increase in tension in the steel wire is 301.6 N
Which of the following processes occurs in a battery?
Batteries convert mechanical energy into chemical energy.
Batteries convert chemical energy into kinetic energy.
Batteries convert mechanical energy into electric energy.
Batteries convert chemical energy into electric energy.
Answer:
Batteries convert chemical energy into electric energy.Explanation:
As seen, batteries have chemical energy in them stored which when used in any electronics produces electricity.
Thus, we can conclude that a battery converts chemical energy into electric energy.
Write a balanced nuclear reaction for one complete cycle
Answer:
H + H ------> He + energy. He + He -----> H + H + He.
Explanation:
Hydrogen having one proton and no neutron fuse with hydrogen having one proton and one neutron forming helium atom with the release of photon. After that two helium atoms combine together forming two hydrogen atoms having one proton each whereas one helium atom having two protons and two neutrons present in their nucleus so the end product of this reaction is hydrogen atoms and helium.
Si dejamos caer un objeto desde una gran altura, ¿será que tiene siempre la misma velocidad
Answer:
asdiieiwihebebwiwo3o2iwjw3