How are metals and metalloids the same?

Because the electrons in sulfur are so tightly bound and unable to move, the element functions more like an insulator. Since electrons have a harder time moving when they are packed closely together as a solid, Sulphur is dull and brittle, which again indicates that it is a poor conductor.

Sulfur is a brittle, pale yellow, odorless solid that is soluble in carbon disulfide but insoluble in water.

Materials like coal and sulfur, however, have a softer, duller appearance. On hammer blows, they crumble into a powdery mass. They lack sonority and have poor conductivity for both heat and electricity.

To know more about brittle solid visit:

https://brainly.com/question/13832555

#SPJ1

No, oxygen and nitrogen will not form an ionic bond.

Covalent bonds formed by sharing electron pairs are what bind nitrogen and oxygen together. Nitrogen has an electronegativity of 3.0, while oxygen has a value of 3.5.

A covalent bond is formed when two atoms exchange one or more pairs of electrons. The two atomic nuclei are concurrently drawing these electrons to them. When the difference between the electronegativities of two atoms is too tiny for an electron transfer to take place to create ions, a covalent bond is formed. Hydrogen (H₂), oxygen (O₂), nitrogen (N₂), water (H₂O), and methane (CH₄) are five examples of covalent bonding. A covalent bond is a type of chemical relationship where two atoms share electron pairs.

Thus, bond between Nitrogen and oxygen is not ionic but covalent bond.

To learn more about ionic bond refer- https://brainly.com/question/977324

#SPJ4

The chain of custody for the finger print on the Door Know is summarized in the Chain of Custody form attached.

This is a procedure that documents each individual who handled the evidence, the date/time it was gathered or transferred, and the purpose for the transfer as it moves through its collecting, safekeeping, and analysis lifespan.

The most important aspect of evidence recording is the chain of custody. It is essential to demonstrate to the court of law that the evidence is genuine, i.e., that it was obtained at the crime scene. It was always in the care of someone assigned to manage it, and it was never unaccounted for.

The chain of custody demands that every transfer of evidence from person to person be documented from the time the evidence is acquired and that it be proven that no one else could have accessed that evidence. It is recommended to restrict the number of transfers to a minimum.

Learn more about the chain of custody:
https://brainly.com/question/17899853?
#SPJ1

Full Question:

In the video at the beginning of this unit, you were introduced to Jordan, a college student and newspaper intern. Jordan was shadowing police who were collecting evidence at the scene of a crime.

Jordan is shadowing the police again at a different crime scene. This time you have gone with him. Your job will be to record all of the required information on a chain of custody document.

Choose one of the items of physical evidence mentioned in Jordan's notes below.

Complete the chain of custody document for that item. (Make it similar to the example provided beneath Jordan's notes.)

Jordan's Notes

Tuesday, February 5

I observed evidence technician Josh Sanders dust the inside doorknob on the front door for latent fingerprints. Dusting the doorknob did reveal latent prints, which Sanders lifted with tape and transferred to a small card. That occurred at approximately 3:15 p.m.

I later observed Detective Laura Wilson collect a bullet casing from the tile floor in the kitchen after another investigator first photographed the area. The bullet casing was found on the floor beneath the kitchen table and was picked up by Wilson (with gloved hands) and placed in an evidence bag. Collection of the bullet casing occurred at 3:42 p.m.

I then looked in the guest bathroom down the hall from the kitchen and observed another evidence technician, William Soto, collecting unknown red fibers from inside the bathroom sink. The time was approximately 3:53 p.m. Soto collected the red fibers with tweezers and placed them inside an evidence bag.

Example of a Chain of Custody Form

Chain of CustodyItem collected as evidence: Individual who collected the item: Date and time of collection: Description of location where item was collected: Method of collection:

The amount, in grams, of iron that would be needed to completely consume 20.0 L of oxygen gas would be 0.599 grams.

The equation of the reaction can be expressed as follows;

[tex]4Fe + 3O_2 --- > 2Fe_2O_3[/tex]

Stoichiometrically, 4 moles of iron requires 3 moles of oxygen gas.

20.0 L of oxygen at 1 atm and 25 °C would be equivalent to:

pv = nrt, where p is the pressure, v is the volume, n is the number of mol, R is the universal gas constant, and t is the temperature.

In this case, p = 1 atm, v = 20.0 L, r = 8.3145, and t = 25 +273

n = pv/rt

  = 1x20/8.3145x298

  = 20/2477.721

  = 0.008 mol of oxygen

The equivalent mole of iron required would be:

0.008 x 4/3 = 0.0107 mol

The molar weight of iron is 56.

Mass of 0.0107 mol of iron = 0.0107 x 56

                                            = 0.599 grams

In other words, 0.599 grams of iron would be needed to completely consume 20.0 L of oxygen at 25 °C and 1 atm.

More on stoichiometric problems can be found here: https://brainly.com/question/23742235

#SPJ1

The process that brings rocks and minerals containing phosphorus to the surface so it can be released for use by living things is called uplift.

A rock is defined as a solid or hard material that is made up of different minerals and they are of three main types such as igneous rock, sedimentary rock and metamorphic rocks.

The minerals that are found in rocks include the following:

quartz,

feldspar,

mica,

amphibole,

phosphorus

olivine, and calcite.

When these minerals are being transported to the surface of the earth to be used by plants and animals it is called uplift.

Learn more about rocks here:

https://brainly.com/question/26046551

#SPJ1

Part 3: Electronegativity of elements: F - F >  N - O > P - O.

Part 4: Electronegativity of elements: Na - F > C - F > C - O > Na - O > Na - N.

The reasons for the Electronegativity of different elemnts are-

Thus,

Part 3: Electronegativity of elements: F - F >  N - O > P - O.

Part 4: Electronegativity of elements: Na - F > C - F > C - O > Na - O > Na - N.

To know more about polarity, click here-

brainly.com/question/24729099

#SPJ1

Based on the latent heat of vaporization of Arsenic triiodide, the amount of heat required to convert 10.0 grams of AsI₃(l) at 424˚C to AsI₃(g) at 424˚C is 593 kJ.

The amount of heat required to convert 10.0 grams of AsI₃(l) at 424˚C to AsI₃(g) at 424˚C calculated from the formula below:

Quantity of heat = mas * latent heat of vaporization

mass of  Arsenic triiodide = 10.0 grams

The latent heat of vaporization of Arsenic triiodide is 59.3 kJ/mol

Quantity of heat = 10.0 g * 59.3 kJ/mol

Quantity of heat = 593 kJ

Learn more about latent heat of vaporization at: https://brainly.com/question/14497212

#SPJ1

The mass of water at 17.0 °C that must be mixed with 180 g (about 6 oz) of coffee at 92.0 °C so that the resulting combination will have a temperature of 73.0 °C is 61.07 g.

The mass of water required is determined from the formula of heat change as follows:

Heat change = mass * specific heat change * temperature change

Heat gained by water = heat lost gained by coffee

Heat lost by coffee = 180 * 4.184 * (92 - 73)

Heat lost by coffee = 14309.28 J

Het gained by water = 14309.28 J

Mass of water =  14309.28 / {4.184 * (73 - 17)}

mass of water = 61.07 g

Learn more about heat change at: https://brainly.com/question/16385499

#SPJ1

Answer:

here is the diagram

Explanation:

Since they don't also have a dipole moment, all diatomic molecules with the same atoms are inherently non-polar. Only when there is a charge gap or unevenly distributed charges across atoms does a molecule produce a dipole moment. Cl2 is hence nonpolar.

Chlorine (Cl2) Take the molecule of chlorine, Cl2, for instance. The two Cl atoms are connected by a solitary covalent bond. The positive Cl atom's nucleus and the covalent bond's negative electron pair are attracted to one another.

Two chlorine atoms that are not metals make up the compound Cl2. Cl2 won't display metallic boding as a result. Cl2 won't contain an ionic bond because ionic bonds only form when a metal and a non-metal interact, so it must be covalent.

To know more about Cl2 visit

https://brainly.com/question/19275071

#SPJ4

Final Molarity of barium ion = 0.127 M.

We first assume the reaction goes to completion and that the volume. of the reaction doesn't change.

The balanced stoichiometric equation is

Ba(NO3)2(aq) + (NH4)2SO4(aq) = BaSO4(s) + 2NH4NO3(aq)

irst of, we need to check which reactant is in excess and which one is completely used up in the reaction. To do this, we fimd the number moles of each reactant at the start of the reaction.

For Ba(so4)₂

Number of moles = (Mass)/(Molar Mass)

Mass of Barium nitrate = 9.91 g

Molar mass of Barium nitrate = g/mol

Number of moles = (9.91/261.337) = 0.038 moles.

For NH₄NO3,

Number of moles = (Concentration in mol/L) × (Volume in L)

Concentration of Ammonium surface in mol/L = 0.50 M

Volume in L = (300/1000) = 0.3 L

Number of moles = 0.50 × 0.3 = 0.15 moles

From the stoichiometric balance of the reaction,

1 mole of Ba(NO3)₂ reacts with 1 mole of BaSO₄

Hence, it is evident that it is Ba(NO3)₂ that is the limiting reagent; the chemical specie that is used up in the process of the reaction and it determines the amount of other reactants required & products formed.

1 mole of Ba(NO3)₂ gives 1 moles of 0.038 moles of BaSO4(s) will give 1× 0.038 moles is The molarity of Ba(SO4) Then given as (number of moles) ÷ (Vol in L)

Number of moles = 0.038moles

Volume of the solution in L = 0.3 L

Molarity of BaSO4  = (0.038/0.3)

= 0.127 M

Note that 1 mole of Ba(SO4)contains 1 mole of Ba+2 ion

Hence, 0.127 M of Ba(SO4) also contains 0.127 M of Ba+2 ion.

learn more about molarity
https://brainly.com/question/26873446
#SPJ9

The normal distance between the two successive base pairs within a DNA is 3.4 Angstroms or 0.34 nm.

DNA base pair. Under normal circumstances, the nitrogen-containing bases adenine (A) and thymine (T) pair together, and cytosine (C) and guanine (G) pair together. The binding of these base pairs forms the structure of DNA .

Hydrogen bonding is the chemical interaction that underlies the base-pairing rules described above. Appropriate geometrical correspondence of hydrogen bond donors and acceptors allows only the "right" pairs to form stably. DNA with high GC-content is more stable than DNA with low GC-content. But, contrary to popular belief, the hydrogen bonds do not stabilize the DNA significantly; stabilization is mainly due to stacking interactions.

A unit of length equal to one hundred-millionth of a centimeter, 10−10 meter, used mainly to express wavelengths and interatomic distances.

Know more about the base pairs visit the link

https://brainly.com/question/19670398

#SPJ4

Answer:

[tex]\huge\boxed{\sf n = 0.5 \ mol}[/tex]

Explanation:

Volume = v = 11.2 dm³

Molar Volume = V = 22.4 dm³/mol

Moles = n = ?

[tex]\displaystyle n = \frac{v}{V}[/tex]

[tex]\displaystyle n = \frac{11.2}{22.4} \\\\n = 0.5 \ mol\\\\\rule[225]{225}{2}[/tex]

The statement which correctly explains how matter is conserved in chemical reactions is- Atoms of each element are conserved, so the total mass does not change.

The Law of Lomonsov-Lavoisier and the Law of Conservation of Mass are other names for the Law of Conservation of Matter. "The mass is not generated or destroyed, simply altered," according to this law.

As a result of the diverse atomic arrangements in the various substances, the reagents interact with one another to create new products that differ from the reagents in terms of their physical and chemical characteristics. But the amount of matter or mass before and after a transformation (chemical reaction) must always be constant; that is, the amounts of the masses involved in a given reaction must not change in their proportions when the reaction is complete.

n other words, the mass prior to the chemical reaction and the mass following the reaction are equal. Nuclear reactions are the exception to the norm, where it is possible to change mass into energy and vice versa.

Hence, the statement which correctly explains how matter is conserved in chemical reactions is- Atoms of each element are conserved, so the total mass does not change.

To learn more about Conservation of matter refer- https://brainly.com/question/29405227

#SPJ4

Your question is incomplete please write the complete question over the internet.

The 32 in Celsius is equivalent to 89.6 degrees Fahrenheit temperature. The temperature measurement unit on the Celsius system is the degree Celsius (originally known as the centigrade scale outside Sweden).

Celsius is measured in the Kelvin scale, one of two temperature scales used in the International System of Units (SI). The Fahrenheit temperature scale is a temperature scale that is based on one that physicist Daniel Gabriel Fahrenheit temperature proposed in 1724. (1686–1736). The unit is the degree Fahrenheit (symbol: °F). The concept of temperature is used to convey quantitatively how hot and cold something is. Using a thermometer, one can gauge temperature. Thermometers are calibrated using different temperature scales that traditionally relied on different reference points and thermometric materials for definition.

Learn more about temperature here

https://brainly.com/question/1844548

#SPJ4

Answer:

0.9 and 0.90 are not the same because 0.9 is not up to zero but 0.90 is up to zero

BaO is characterized by ionic bonding.

There are many types of chemical bonds that bond the molecules together. The most important types of bond are generally ionic and covalent bonds. In ionic bond, electrons transfer takes place whereas in the covalent bonding, sharing of electrons takes.

We need one electron donor and one electron acceptor in case of ionic bond but in case of the covalent bonds, atoms with same electronegativity share the electrons. Also, ionic bonds are formed between metal and a non- metal and covalent bonds are formed between two nonmetals.

In this question, we need to determine whether BaO is covalent or ionic. Here, in this case barium is metal and oxygen is non-metal. Ionic bonds generally occur between metallic elements and nonmetallic elements. Hence, there is a bond between metal and non-metal so the bond formed will be ionic.

Therefore, BaO has an ionic bond.

To know more about ionic bond

https://brainly.com/question/11527546

#SPJ4

The electrons at an atom's outermost energy level known as valence electrons are those that may interact with other atoms. The electrons that are typically the farthest from the nucleus are those with valence.

S and P electrons, which are located in the outermost shell, are valence electrons. Core electrons make up the inner shell's electron population. We encounter little subatomic particles known as valence electrons when we examine and investigate an element's atom. Lewis structures aid in valence electron tracking and bond type prediction.

Valence electrons are mostly negatively charged particles that are grouped in various orbitals or shells. These electrons are also in charge of how atoms interact with one another and how chemical bonds are created. Not every electron, nevertheless, is connected to the atom. Chemical bonds and molecules can only be formed by electrons that are located in the outermost shell of a molecule. Valence electrons are a subclass of these particles.

Learn more about Valency electron here:

https://brainly.com/question/13993867

#SPJ4

The balanced chemical equation for acid-base reactions is as given below

2HCl(aq) + Ca(OH)2 ------ CaCl2 + 2H2O

A chemical equation is said to be balanced chemical equation if the atoms or molecules of different elements on the reactant side is equal to the atoms or molecules of different elements on the product side.

In the given reaction, HCl is reactant and Ca(OH)2 is base. They react with each other to form CaCl2 and release two molecules of H2O.

Now, we will balance the chemical equation.

On reactant side, there are 3 atoms of hydrogen atoms, one atom of chlorine, two atom of oxygen and one calcium atom. So, we equal it by reacting two molecules of HCl with one molecule of Ca(OH)2 to form one molecule of CaCl2 and two molecules of water.

Therefore, by balancing equation we get

2HCl(aq)+Ca(OH)2 ------ CaCl2 + 2H2O

Thus, we concluded that the balanced chemical equation for acid-base reactions is as given below:

2HCl(aq) + Ca(OH)2 ------ CaCl2 + 2H2O

learn more about balanced chemical equation:

https://brainly.com/question/15052184

#SPJ1

Despite having polar bonds, the gas carbon dioxide is a nonpolar molecule. CO2 has a linear structure. Since each bond dipole has an equal magnitude and is pointing in the opposite direction, they cancel each other out.

Polar bonds are seen in carbon dioxide, a non-polar compound. By first looking at the makeup of carbon dioxide, it can be understood. In carbon dioxide, a carbon atom forms a double bond on one side with an oxygen atom, and a second double bond on the other side with another oxygen atom.

To know more about polar bonds visit:

https://brainly.com/question/2579188

#SPJ1

Amino acids and carboxylic acids both contain functional groups in organic compounds known as amino acids. Amino acid also known as  carboxylic acids

The importance of alpha-amino acids, which build up proteins, cannot be overstated. Only 22 alpha amino acids make up the genetic code. An example of an amino acid is alpha-amino [alpha-amino] carboxylic acid. Every molecule contains a core carbon atom (C), also known as the -carbon, which is connected by both an amino and a carboxyl group. Frequently, the final two bonds of the -carbon atom are filled by a hydrogen (H) atom and the R group. The common formula for a carboxylic acid is R-COOH, where R stands for the molecule's remaining portion and COOH for the carboxyl group.

Learn more about carboxylic acid here

https://brainly.com/question/4721247

#SPJ4

The statement which best represents the Law of Conservation of Matter with regard to chemical reaction is reactants and products have the same number and type of atoms, but the atoms may be recombined.

According to the rule of conservation of mass, matter cannot be generated or destroyed during a reaction. This implies that the mass of each reactant and each product in a reaction will be equal. Although the mass may change forms during the reaction, neither matter creation nor destruction occurs.

In a closed system, matter is conserved, to put it another way. Nothing (gas, water, or other) may enter or leave a closed system. The system contains all of the products. The system cannot accept or reject matter. A closed system could be the entire earth or it could be a tightly enclosed test tube.

The terms "law of conservation of mass" and "law of conservation of matter" are frequently used interchangeably. The law may also go by the titles of the law of mass conservation or the conservation of matter.

Hence, reactants and products have the same number and type of atoms, but the atoms may be recombined- best represents the law of conservation of matter.

To learn more about Law of conservation of matter refer- https://brainly.com/question/13823292

#SPJ4

Your question is incomplete please write the complete question over the internet.

An amino group is a functional group consisting of an amino (-NH2) and a carboxyl (-COOH) group, which is found in proteins.

It is essential for the formation of peptide bonds between amino acids, which are the building blocks of proteins. The amino group is partially positively charged and is therefore able to interact with other molecules through hydrogen bonding and electrostatic interactions.

The amino group is also able to donate a hydrogen atom, making it an important component in many biochemical reactions.

Furthermore, it plays an important role in the folding of proteins, as the electrostatic interactions between the amino and carboxyl groups help stabilize the protein's three-dimensional structure. In addition, the presence of the amino group can influence the solubility of proteins in different solutions.

To know more about proteins, click below:

https://brainly.com/question/10058019

#SPJ4

The net charge is negative [(+16) + (18) = 2] when there are more electrons than protons, as is the case with the sulfur ion. Anions are negative ions.

The electron, the smallest constituent part of an atom, has a negative electrical charge .Protons and electrons each occurs in similar numbers in neutral atoms. One atom and one proton are all that the hydrogen atom has. On the other hand, the uranium atom possesses 92 protons, which means 92 electrons.

The electrons are an atom's negatively charged building blocks. The total negative charge of an atom's electrons counteracts the charge of its protons in the elementary particle.

To know more about electrons visit :

https://brainly.com/question/1255220

#SPJ4

Due to increase in surface area and Vander Wall's force of attraction, boiling point of alcohols increases with increase in number of carbon atoms.

increase in surface area and Vander walls force of attraction

Reduction is a type of chemical reaction in which a particular molecule or compound loses one or more electrons.

It is the opposite of oxidation, which involves the addition of electrons. During a reduction reaction, the number of electrons held by a molecule increases, resulting in a decrease in the oxidation state of the molecule.

This type of reaction usually involves the transfer of electrons from one molecule to another. Examples include the reduction of a metal oxide to form a metal, the reduction of nitrate to form a nitrite, and the reduction of an aldehyde to form an alcohol.

Reduction reactions play an important role in chemical synthesis, energy production, and the metabolism of living organisms.

To know more about oxidation, click below:

https://brainly.com/question/6816739

#SPJ4

Answer:

Producers are the base of the food web

Explanation:

Many producers use the sun (plants do; photosynthesis), air, soil, water; they create their own energy