How do the particles in plasmas compare with
the particles in solids?
O Plasmas and solids are both made up of cation-anion pairs.
• Solids and plasmas are both made up of electrons and cations.
Solids are made up of cation-anion pairs, but plasmas are not.
O Plasmas are made up of cation-anion pairs, but solids are not.

Answer:

c. 29 J

Explanation:

Step 1: Given data

Step 2: Calculate the temperature change

ΔT = 37 °C - 22 °C = 15 °C

Step 3: Calculate the heat (Q) required to raise the temperature of the lead piece

We will use the following expression.

Q = c × m × ΔT

Q = 0.13 J/g.°C × 15 g × 15 °C = 29 J

Answer:

Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)

Answer: it’s checkbox 2&3

Answer:

B. only formed in laboratories

Explanation:

i know

Isotopes are only formed in Laboratories. hence, Option (B) is correct.

Each of two or more forms of the same element that contain equal numbers of protons but different numbers of neutrons in their nuclei, and hence differ in relative atomic mass but not in chemical properties; in particular, a radioactive form of an element is known as Isotope.

Isotopes are two or more types of atoms that have the same atomic number and position in the periodic table, and that differ in nucleon numbers due to different numbers of neutrons in their nuclei.

Therefore, Isotopes are only formed in Laboratories. hence, Option (B) is correct.

Learn more about Isotopes here ;

https://brainly.com/question/12955625

#SPJ2

Answer: c

Explanation:   Filtration is technically defined as the process of separating suspended solid matter from a liquid

Pulp is a lignocellulosic fibrous material prepared by chemically or mechanically separating cellulose fibers from wood, fiber crops .

Many commercial juices are filtered to remove fiber or pulp.

The correct answer is C, Pulp.

Orange is an example of a citrus fruit. Every citrus fruit has a pulp. The of pulp a citrus fruit is that stringy content in the endocarp of the fruit .

The pulp of a citrus fruit is where its juice is found.

When you want to prepare orange juice, you need to remove the pulp of the citrus fruit. This is done by filtering out the pulp from the juice.

Filtration is the process of removing larger particles. For a liquid juice, filtration is the process of removing solid particles from the orange juice.

https://brainly.com/question/11403039

Answer:

liquid will be evaporated while solid remains

The Adsorbent is used as part of the stationary phase and has an affinity for the solvent and the chemical components of the mixture.

The adsorbent has a high affinity for solvent and the chemical components of the mixture.

Chromatography is a method of separation in which the mixture of substances is introduced into a mobile phase (solvent). The separation occurs as the solvent interacts with an adsorbent(stationary phase).

The extent of separation of the components of the mixture depends on the extent of interaction between the mobile and the stationary phase . This interaction also determines the retention factor (Rf) of the separation.

For a definition of chromatography, see

https://brainly.com/question/19334271

The wavelength of the color cyan is 508 nm.

To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:

c = λ x ν

Given:

c = speed of light = 3.00 x 10⁸ m/s (is a constant)

ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹

We introduce the data to calculate the wavelength in m:

λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m

We know that 10⁻⁹m = 1 nm, so we convert λ to nm:

λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm

To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945

Answer:

A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds.

Explanation:

You have to put energy into a molecule to break its chemical bonds. The amount needed is called the bond energy. After all, molecules don't spontaneously break

Answer:

a mixture that doesn't really show the ingredients or things put into the material or food.

Answer:

a. 4.41 g of Urea

b. 1.5 g of Urea

Explanation:

To start the problem, we define the reaction:

2NH₃ (g) +  CO₂ (g) → CH₄N₂O (s)  +  H₂O(l)

We only have mass of ammonia, so we assume the carbon dioxide is in excess and ammonia is the limiting reactant:

2.6 g . 1mol / 17g = 0.153 moles of ammonia

Ratio is 2:1. 2 moles of ammonia can produce 1 mol of urea

0.153 moles ammonia may produce, the half of moles

0153 /2 = 0.076 moles of urea

To state the theoretical yield we convert moles to mass:

0.076 mol . 58 g/mol = 4.41 g

That's the 100 % yield reaction

If the percent yield, was 34%:

4.41 g . 0.34 = 1.50 g of urea were produced.

Formula is (Yield produced / Theoretical yield) . 100 → Percent yield

Answer:

a. Na(s); b. Al(s); c. Zn(s)

Explanation:

Let's consider the following redox reactions.

a. ZnCl₂ (aq) + 2 Na(s) → Zn(s) + 2 NaCl(aq)

Na is oxidized because its oxidation number increases from 0 to +1 (in NaCl) whereas Zn is reduced because its oxidation number decreases from 2+ (in ZnCl₂) to 0.

b. Al(s) + FeBr₃ (aq) → AlBr₃ (aq) + Fe(s)

Al is oxidized because its oxidation number increases from 0 to +3 (in AlBr₃) whereas Fe is reduced because its oxidation number decreases from 3+ (in FeBr₃) to 0.

c. FeSO₄ (aq) + Zn(s) → Fe(s) + ZnSO₄(aq)

Zn is oxidized because its oxidation number increases from 0 to +2 (in ZnSO₄) whereas Fe is reduced because its oxidation number decreases from 2+ (in FeSO₄) to 0.

Answer:

True

Explanation:

Aromatic rings undergo nucleophillic substitution reactions in the presence of a electron withdrawing group which stabilizes the Meisenheimer complex.

When the nucleophile attacks the ring carbon atom carrying the eventual leaving group. A resonance-stabilized carbanion intermediate called a Meisenheimer complex is formed.

Subsequent loss of the leaving group from the intermediate complex yields the product of the reaction.

Answer:

Sr is the more metallic element

Bi is the more metallic element

O is the more metallic element

As is the more metallic element

Explanation:

One thing should be clear; metallic character increases down the group but decreases across the period.

Hence, as we move across the period, elements become less metallic. As we move down the group elements become more metallic.

This is the basis upon which decisions were made about the metallic character of each of the elements listed above.

Answer:

Tapeworm, also called cestode, any member of the invertebrate class Cestoda (phylum Platyhelminthes), a group of parasitic flatworms containing about 5,000 species. ... Tapeworms also lack a circulatory system and an organ specialized for gas exchange.

The statement that "substance A is rice, and substance B is sugar" is correct.

WHAT IS A MIXTURE?

According to this question, a mixture contains two substances A and B. Water is added to this mixture for easy separation.

Therefore, in the mixture of two substances A and B, substance A is rice, and substance B is sugar.

Learn more at: https://brainly.com/question/6594631

Answer:

1)In organic chemistry, the bromine test is a qualitative test for the presence of unsaturation (carbon-to-carbon double or triple bonds), phenols and anilines. ... The more unsaturated an unknown is, the more bromine it reacts with, and the less coloured the solution will appear.

2)The equation for incomplete combustion of propane is: 2 C3H8 + 9 O2 → 4 CO2 + 2 CO + 8 H2O + Heat. If not enough oxygen is present for complete combustion, incomplete combustion occurs. The result of incomplete combustion is, once again, water vapour, carbon dioxide and heat. But it also produces carbon monoxide.

Explanation:

3)Propene, also known as propylene, is an unsaturated organic compound with the chemical formula {\displaystyle {\ce {CH3CH=CH2}}}. It has one double bond, and is the second simplest member of the alkene class of hydrocarbons. It is a colorless gas with a faint petroleum-like odor. 

Formula: C3H6

IUPAC ID: Propene

4)Margarines are chemically created during hydrogenation which, until January 1, 2006, relied upon trans fats to solidify their vegetable oils. Food companies have been exploring options for replacing trans fat in partially hydrogenated margarine.

Answer:

A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.

Examples - Superconductors and superfluids are the two examples of BEC.

Explanation:

Explanation:

Sulfuric Acid (H2SO4) is a strong mineral acid that has is colorless when pure. This chemical is used as a chemical intermediate to manufacture other chemicals and cleaning metal surfaces. The formula for sulfuric acid is H2SO4. The molar mass of sulfuric acid is 98.07848 g mol.

Explanation:

The given balanced chemical equation is:

[tex]2 HI(g) <--> H_2 (g) + I_2 (g)[/tex]

The value of Kc at 445oC is 0.020.

[HI]=1.5M

[H2]=2.50M

[I2]=0.05M

The value of Qc(reaction quotient ) is calculated as shown below:

Qc has the same expression as the equilibrium constant.

[tex]Qc=\frac{[H_2][I_2]}{[HI]^2} \\Qc=(2.50Mx0.05M)/(1.5M)^2\\Qc=0.055[/tex]

Qc>Kc,

Hence, the backward reaction is favored and the formation of Hi is favored.

Among the given options, the correct answer is option d. Qc is greater than Kc; more HI will be produced.

Answer:

1.1 × 10²¹ NH₃ molecules

Explanation:

From the given information:

We were being told that the number of the hydrogen (H) atoms present in the sample of NH3 = 3.3 × 10²¹ hydrogen.

However, it signifies that each molecule of ammonia harbors 3hydrogen (H) atoms.

Hence,  the number of  molecules of NH₃ present;

[tex]\mathsf{=\dfrac{3.3\times 10^{21}}{3} \ molecules \ of \ {NH_3}}[/tex]

= 1.1 × 10²¹ NH₃ molecules

Answer:

1. Water purification method by reverse osmosis – membrane filtration

2. Method of purifying pure water by filter

3. Demineralization by ion exchange method

3. Demineralization by ion exchange method

Explanation:

Answer:

boiling point is the physial property of matter

The option that is showing the physical property of the matter is boiling point, the correct option is C.

A physical property is any measurable property whose value describes the state of a physical system.

Changes in a system's physical properties can be used to describe its transitions between momentary states. Physical properties are also known as observables. They do not have modal properties.

Physical properties include color, phase, odor, and boiling point. Since reactivity with oxygen is dependent on the chemical nature of the object, it is not a physical property.

A compound's physical property is one that can be observed and measured. The chemical composition of a compound is unaffected by a physical property.

Thus, the correct option is C.

For more details regarding physical property, visit:

https://brainly.com/question/18327661

#SPJ6

Answer:

number of moles of gas increases the volume also increases.

Answer:

a. LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

b. [Li⁺] = [F⁻] = 6.2 x 10⁻² M

c. Ksp = [Li⁺] [F⁻]

d. Ksp = 3.8 × 10⁻³

Explanation:

The solubility (S) of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10⁻² M.

a. The balanced solubility equilibrium equation for LiF is:

LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

b. We will make an ICE chart.

        LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

I                       0           0

C                     +S         +S

E                       S           S

Then, [Li⁺] = [F⁻] = S = 6.2 x 10⁻² M

c. The solubility product constant, Ksp​, is the equilibrium constant for a solid substance dissolving in an aqueous solution.

Ksp = [Li⁺] [F⁻]

d.

Ksp = [Li⁺] [F⁻] = (6.2 x 10⁻²)² = 3.8 × 10⁻³

Answer:

The total consumer surplus is 240.

Explanation:

If p=12 then q=20

0.5×(36−12)×20=240

here's the graph to help you see the change.

Answer:

Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).

Explanation:

Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.

Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).

Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

Learn more about Quantum here ;

https://brainly.com/question/16746749

#SPJ2

Answer:

Explanation:

We are to match each land resource to what they are being used for.

Clay             →→→  used to make pottery and tiles

iron ore       →→→  used to make steel

Salt              →→→   used as a flavoring in food

aggregate   →→→   used in construction

graphite       →→→ used to make batteries

Clay is a kind of soil particle that forms as a result of weathering processes. Examples include; pottery clays, glacial clays, and deep-sea clays e.t.c. The presence of one or more clay minerals, as well as variable quantities of organic and detrital components, characterizes all of them. Clay is usually sticky and moist when wet, but hard when dry. They are used in the making of tiles and potteries.

Iron ore:  The iron ore deposits are found in the Earth's crust's sedimentary rocks. They're made up of iron and oxygen that mix during the chemical process in marine and freshwater. iron ores are used to produce almost every iron and steel product that we use today.

Aggregate: are utilized in construction activities. It is a material used to mix cement, gypsum, bitumen, or lime to produce concrete in the construction industry.

Graphite: Graphite is a mineral that occurs in both igneous and metamorphic rocks. It is generally generated on the earth's surface when carbon is exposed to high temperatures and pressures. It is mainly used in the production of batteries and electrodes,