Answer:
the Name of NiBr2 is
Nickel(II) bromide
HF or HCl which can form the hydrogen bond? Explain your answer.
Answer:
can only form one hydrogen bond each
Explanation:
can only form one hydrogen bond each
Which of these solutions is acidic?
Answer:
Option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
Explanation:
To know if a solution is acidic we need to calculate the pH and it must be lower than 7. A value of pH equal to 7 is a neutral solution and a solution with a pH value higher than 7 is a basic solution.
a. For the [OH⁻] = 7.0x10⁻⁹ M we have:
[tex] pOH = -log[OH^{-}] = -log(7.0 \cdot 10^{-9}) = 8.15 [/tex]
Now, the pH is:
[tex] pH + pOH = 14 [/tex]
[tex] pH = 14 - pOH = 14 - 8.15 = 5.85 [/tex]
This solution is acidic (pH < 7)
b. [H₃O⁺] = 8.5x10⁻⁸ M
[tex] pH = -log(8.5 \cdot 10^{-8}) = 7.07 [/tex]
This is not an acidic solution. Is a neutral one (pH around to 7).
c. [OH⁻] = 2.5x10⁻⁶ M
[tex] pOH = -log[OH^{-}] = -log(2.5 \cdot 10^{-6}) = 5.60 [/tex]
Then, the pH is:
[tex]pH = 14 - pOH = 14 - 5.60 = 8.40[/tex]
Hence, this is not an acidic solution. It is basic (pH > 7).
Therefore, option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
I hope it helps you!
Balance in basic solution: O2(g) + Cr³+ (aq) → H₂O2 (1) + Cr₂O7²- (aq)
cr2o72+H2o2-(r3+o2)
Explanation:
r62o72+H2o2-(r3+o2)
What is the name for the compound li2so4
Answer:
Explanation:
Lithium Sulphate
Answer:
Lithium sulfate is a white inorganic salt with the formula Li2SO4. It is the lithium salt of sulfuric acid.
Which factors ALL increase reaction rate?
decrease temperature, stir, increase surface area, remove catalyst
none of these
increase temperature, increase surface area, add catalyst, stir
increase temperature, stir, decrease surface area, add catalyst
Answer:
increase temperature, increase surface areas, add catalyst, stir
The rate of reaction can be increased with the increase in temperature, surface area, adding catalyst and allowing stirring. Thus, option C is correct.
What is rate of reaction?The rate of reaction is given as the rate of formation of product or the rate of disappearance of reactant in unit time.
The rate of reaction can be affected with:
Increase in temperature - It will increase the collisions between the reactants, and thereby the rate.Increase in surface area - It results in increased interaction of the reactant molecules for the formation of product.Catalyst - It lowers the activation energy of the reactant, and thereby increases the rate of reaction.Stirring - It mediates the increase in the collisions and the surface area, and resulting in increased rate of reaction.Thus, the rate of reaction can be increased with the increase in temperature, surface area, adding catalyst and allowing stirring. Thus, option C is correct.
Learn more about rate of reaction, here:
https://brainly.com/question/13440548
#SPJ2
Suppose you had a valuable collection of small diamonds, which you kept safe from the thieves by mixing them with white sugar crystals. You store the mixture in a jar labeled 'sugar'. Now you want to sell the diamonds. Describe how you would separate all the diamonds from the sugar.
Answer:
Pour the sugar/diamond mixture into a container of water and stir until the sugar is dissolved completely. Then strain the mixture and wash the diamonds with water.
Answer:
Stir with a large enough volume of cold water to dissolve all the sugar. Filter to leave the diamonds on the filter paper. Wash on the filter paper with more water to remove any last traces of sugar solution. Allow to dry.
Explain which intermolecular force is primarily responsible for the unusually high boiling point of H2OH2O. Compare the strengths of intermolecular forces of attraction present in a sample of liquid water to the strengths of intermolecular forces of attraction present in liquid samples of H2SH2S, H2SeH2Se, and H2TeH2Te. Justify your answer using the information presented in both tables, and complete the statements below.
Answer:
See explanation
Explanation:
Intermolecular forces are forces of attraction that exist between molecules of a substance in a particular state of matter.
The dominant intermolecular force of attraction in H2O is the hydrogen bond. The hydrogen bond exists between molecules of a substance when the substance is made of hydrogen atoms bonded to atoms of a highly electronegative element. Hence, strong hydrogen bonding accounts for the high boiling point of water.
The magnitude of hydrogen bonding between molecules depends on the electro negativity of the atoms to which hydrogen is bonded.
The more the electro negativity of the atoms to which hydrogen is bonded, the greater the magnitude of intermolecular hydrogen bonding.
Since the electro negativity of elements decrease down the group, the strength of intermolecular hydrogen bonding between the molecules decreases as follows;
H2O> H2S> H2Se> H2Te
what is the most appropriate unit to measure the following; the length of a football field. b) the diameter of a tennis ball
Explanation:
a) m (metre)
b) mm (millimeter)
Which statement describes the law of conservation of energy?
All systems will exchange matter and energy with their surroundings.
All systems can exchange energy, but not matter, with their surroundings.
Energy cannot be created nor destroyed, but it changes from one form to another.
Energy is destroyed in most chemical reactions when new products are formed.
Answer:
All systems will exchange matter and energy with their surroundings.
Explanation:
Answer:c
Explanation:
Are you ready kids?
Aye, aye Captain.
I can't hear you!
AYE, AYE CAPTAIN!
Oooooooooh.
Who lives in a pineapple under the sea?
Spongebob squarepants!
Absorbent and yellow and porous is he?
Spongebob squarepants!
If nautical nonsense be something you wish!
Spongebob squarepants!
Then drop on the deck and flop like a fish!
Spongebob squarepants!
Ready?
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob-squarepants.
can you solve this science question ⁉️
Answer:
chemical reaction between those a b c it's a reaction which occurs when heating
Write the relation of M3 with its multiples
Explanation:
HI friends good morning
what is the product of SO2+H2O.
Answer:
H2O + SO2 → H2SO3
Explanation:
H2O + SO2 → H2SO3
Answer:
l think this is the answer .
Identify the correct mole ratio for each substance.
Sodium chloride (NaCl)
Na:Cl = 1: _
Ammonium nitrate(NH.NO3)
H:0 = 4: _
Answer:
The mole ratio of H : O in ammonium nitrate is 4 : 3.
Explanation:
We are given a compound named ammonium nitrate having formula
There are 3 elements in this compound which are nitrogen, hydrogen and oxygen.
To calculate the mole ratio, we write the ratio of their subscripts. For this compound,
What is the molecular geometry of a molecule made of two atoms that share one pair of electrons and have no lone electrons pairs?
trigonal pyramidal
linear
trigonal planar
bent
Answer:
linear
Explanation:
Actually I consulted various sources too and that was the most sought answer,I just decided to answer you before studying it too
****URGENT****
I need help!!!
the answers are there, i need someone to explain please!
Explanation:
your answer was correct
WILL MARK BRAINLY IF GOOD ANSWER :)
Chlorine and oxygen are both gases at room temperature. What are some characteristic properties of chlorine that distinguish it from oxygen?
Answer:
Well one characteristic is electical energy transforms into thermal energy and gases and the state of matter(one of the distinct form i which matter exist)
calculate the maximum mass of ethanol that could be obtained from 30.0g of glucose
Answer:
15.3g
Explanation:
C6H12O6 → 2C2H5OH + 2CO2
1 mol C6H12O6 = 180g
1 mol CH3-CH2-OH = 46g
From 180g glucose ethanol can get = 92g
30g glucose ethanol gives us = (92*30)/180 = 15.33g
In a hospital, bags of saline solution are used to rehydrate patients. They are made by dissolving a specific amount of salt in water. What is the solvent in the saline solution?
A. Bag
B. Patient
C. Saline
D. Water
Water is the solvent in the saline solution. Hence, option D is correct.
What is the solute?A solute is something being dissolved, a solvent is a thing dissolving the item, and the solution is the mixture of the two items.
In a hospital, bags of saline solution are used to rehydrate patients. They are made by dissolving a specific amount of salt in water. Water is the solvent in the saline solution.
Hence, option D is correct.
Learn more about the solution here:
https://brainly.com/question/7932885
#SPJ5
Which reaction occurs at the cathode in an electrochemical cell?
A. Cu(s) → Cu2+(aq) + 2e
B. Cu2+(aq) + H2(g) → Cu(s) + 2H+(aq)
C. Cu(s) + 2H+(aq) → Cu2+(aq) + H2(g)
D. Cu2+(aq) + 2e → Cu(s)
Answer:
I could be wrong but I say it's letter b
Explanation:
I hope you have an great night
Question 2: thanks!!!
2 Figure 3.1 shows two different forms of carbon, A and B.
A
B
Figure 3.1
a Name the two forms of carbon shown.
Answer:
show the pictures pls specify
Differentiate between emperical and
molecular formula. Give an example of
a substance having different emperical
and molecular formula
Answer:
Here’s an example:
CH (methylene) is the empirical formula.
C2H2 is a molecular formula. It is a gas called Ethyne.
C8H8 is an oily liquid called Styrene. It is also a molecular formula.
Now compare: even though the empirical formula for these compounds is the same, they have different molecular formulas and different properties.
Explanation:
Some background information:
The empirical formula is the formula with the lowest whole number ratio of an element in a compound. A molecular formula is the chemical formula of a (molecular) compound. The molecular formula gives us the exact number of atoms or moles in that compound.
I have attached pictures for a better understanding of the empirical formula.
solution is an example of______mixtures
Answer:
homogeneous mixture must be the answer
A new stable element with an atomic number of 120 and an atomic mass of 246 is created in a particle accelerator. Enough of this element is created to determine that it combines with chlorine in a 1:2 ratio. Element 120 should be placed in the same group as _____ on the periodic table.
Answer:
Be,Mg,Ra etc
Explanation:
It should be palced in group 2A because as it reacts with chlorine in ratio of 1:2 . It's valancy is 2 and is metal as it react with non metal donating two electrons .
one more thing it fits there orderly
If I add sugar into water then _________________
Pls help
Explanation:
When adding sugar to water it became a syrupy solution. Here sugar acts as solute, the water acts as solvent and syrupy acts as solution. When adding sugar to water, the disaccharide of sucrose is converted into monosaccharides of glucose and fructose
Answer:
syrupy solution
why is the Dna molecule able to open up and close?
Answer:
The breaking of the hydrogen bonds due to the force relieves the torsional stress stored in a double helix. As a result, the nucleotide strands rotate more freely about the axis of a helix and start unwinding. ... The DNA unzipping and the DNA unwinding result in a structural transformation from dsDNA to ssDNA.
PLZ HELP ME WITH MY WORK
What is a compound?
A substance that is made from two different metals
B. A substance that cannot be broken into simpler substances
C. A substance that is made using a chemical reaction
D. A substance that can be separated by physical means
Answer:
C.
Explanation:
Answer A is incorrect because a compound doesn't have to be made with only metals.
Answer B is incorrect because that is actually the definition of a pure element.
Answer C is correct because to make a compound, there has to be a chemical reaction where bonds are formed and an entirely new substance is created.
Answer D is incorrect because compounds cannot be separated by physical means.
Hope this helps :D
A sample of gas occupies 1.2 L at 12.0oC. Assuming pressure remains the same, what would be the volume (in L) of this gas at 67oC?
A.
1.4
B.
1.0
C.
0.2
D.
5.0
E.
6.7
Answer:
e.
6.7
hope it help
.
.
.
.
.
.
Identify any three acids.
Identify any three bases.
Some species form social groups only with members of the same gender. For example, elephants form groups with
only females and their offspring. Once the male offspring reach a certain age, they leave the group and become
solitary.
Which is a benefit of this type of social group structure?
Explanation:
For example, elephants form groups with only females and their offspring. Once the male offspring reach a certain age, they leave the group and become solitary. Which is a benefit of this type of social group structure? A:Females do not have to compete for a mate.
