Answers
Answer:
the answer should be six months
Related Questions
Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. Circle True or False.
Answers
The answer is true, yw.
Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. This statement is true.
What are conifers ?Conifers are a type of gymnosperm plants bearing cone like structures in which the seeds are located. Don't be fooled by the fact that coniferous woods are widespread around the world. Some of the wildest trees in the world can be found there.
Hyperion, a coastal redwood tree, is the tallest tree in the world, reaching a height of 379 feet, equivalent to a 35-story structure. From Siberia to Canada, coniferous rainforest biomes can be found. They have cold winters and warm to hot summers.
Temperatures in coniferous forests are quite low all year long. Summertime temperatures range from -7°C to 21°C, while the average wintertime temperature ranges from -54°C to -1°C. Hence, the statement is true.
Find more on conifers:
https://brainly.com/question/30415885
#SPJ6
I know the answer out here are points for you! It’s 3 if anyone needs the answer !
Answers
Answer:
lol thanks for the 10
Explanation:
The volume of a gas is 550 mL at 960 mm Hg and 200.0 C. What volume
would the pressure of the gas be 830 mm Hg if the temperature is reduced
to 150.0C? Make sure your answer is rounded to nearest whole number
and your final answer has the units of mL. *
Answers
Answer:
The volume will be 568.89 mL.
Explanation:
Boyle's law says that "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
or P * V = k
Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. That is, the pressure of the gas is directly proportional to its temperature. Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T}=k[/tex]
Where P = pressure, T = temperature, K = Constant
Finally, Charles's law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T}=k[/tex]
Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:
[tex]\frac{P*V}{T} =k[/tex]
Studying an initial state 1 and a final state 2, it is fulfilled:
[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]
In this case:
P1= 960 mmHgV1= 550 mLT1= 200 C= 473 K (being 0 C=273 K)P2= 830 mmHgV2= ?T2= 150 C= 423 KReplacing:
[tex]\frac{960 mmHg*550 mL}{473K} =\frac{830 mmHg*V2}{423 K}[/tex]
Solving:
[tex]V2=\frac{423 K}{830 mmHg} *\frac{960 mmHg*550 mL}{473K}[/tex]
V2= 568.9 mL
The volume will be 568.89 mL.
Calculate the volume which 1.00 mole of a gas occupies at 1 atm and 298K?
Answers
Answer:
25.45 Liters
Explanation:
Using Ideal Gas Law PV = nRT => V = nRT/P
V = (1mole)(0.08206Latm/molK)(298K)/(1atm) = 25.45 Liters
True or False: A heterozygous genotype produces the dominant phenotype because the dominant allele masks the recessive allele.
Is it true or false guys??
Answers
PLEASE HELP!!!!! 10 POINTS!!
What electron could have quantum numbers n=3, l=0, ml=0, ms=-1/2
Answers
Answer:
Explanation:
It is a 3s electron
The student wants to test the conductivity of each solution. Prior to carrying out the investigation, the student needs to identify the variables being controlled and the variables being changed between the two solutions. Which identification of the variables is correct?
Options:
The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number of solute particles is being held constant.
The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volume is being held constant.
The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentration of the solution is being held constant.
Answers
Answer:b
Explanation: the particles will soon dissolve which means that the particles are changing but the volume is staying the same and the concentration is changing
The identification of the variables which is correct is that the number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
What are variables?Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.
There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change.
Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.
Learn more about variables,here:
https://brainly.com/question/17344045
#SPJ3
Using the periodic table, determine the number of PROTONS for the element Li
Answers
What volume of solution is required to produce a 7.8M solution containing 23.6g of LiBr?
Answers
Answer:
34.9 mL
Explanation:
First we convert 23.6 g of LiBr into moles, using its molar mass (86.845 g/mol):
23.6 g ÷ 86.845 g/mol = 0.272 mol LiBrNow we can calculate the required volume, using the definition of molarity:
Molarity = moles / litersliters = moles / Molarity0.272 mol / 7.8 M = 0.0349 LWe can convert L into mL:
0.0348 L * 1000 = 34.9 mLHow many planets did early astronomers know about?
Answers
Answer:
5 Plants
Explanation:
Also can i have Brainlist
Please please please please please please help me a b c or d
Answers
Answer:
the answer is d
Explanation:
hopes this helps
Some vitamins and dietary supplements are stored in opaque, darkened
bottles to protect them from UV light because UV light would cause a
reaction. Which word could be used to describe UV light in this situation?
O A. Catalyst
B. Enzyme
C. Solvent
D. Reactant
Answers
because it is and it’s cool
The correct option for the given question about Harmfull effect of UV light is Option D) Reactant.
Why UV light is so harmfull for some vitamins?In general, temperature, oxygen, and light impacts on vitamins and minerals are sensitive. A nutrient can lose its biological potency if its molecular structure is slightly altered.Numerous vitamins, including vitamin A, vitamin B2 (riboflavin), vitamin B6, vitamin B12, and folic acid, are known to be particularly susceptible to UV radiation oxidation.Additionally, light speeds up the negative interactions between vitamins.For instance, the combination of riboflavin and light together speeds up the breakdown of both folic acid and vitamin C. This is what causes milk that has been exposed to light to lose vitamin C.Thus to conclude we can say that UV light damages some vitamins by reacting with them.
Learn more about Harmfull effect of UV light here:
https://brainly.com/question/11126315
#SPJ2
Evidence of Earth’s plate tectonic activity is most obvious after an earthquake. Which explanation best describes this plate tectonic movement?
A: Earth’s plates stress one another. However, when an earthquake occurs, plate movement is due to an unbalanced force on the plates.
B: Earth’s plates are moving fast. However, the force of friction slows their movement.
C: The force of gravity causes the floating plates to move up and down. The plate movement sometimes results in earthquakes.
D: Earth’s plates continually place stress on one another. However, the force is balanced during an earthquake.
Answers
Answer:a
Explanation:bc
Plates on Earth are moving quickly. Yet, friction causes them to travel more slowly. So, the correct options are B and C.
What are tectonic plates?Tectonic plates are enormous fragments of the upper mantle and crust of the Earth. They are composed of both continental and oceanic crust. Earthquakes occur around mid-ocean ridges and the large faults which mark the edges of the plates.
The Earth's plates are shifting swiftly. Nevertheless, friction slows their movement. Gravity causes the floating plates to rise and fall. On occasion, the movement of tectonic plates results in earthquakes.
When compared to the Earth's mantle, the plates behave like solid, unyielding shells. The lithosphere is the name given to this thick outer layer.
Thus, the correct options are B and C.
Learn more about Tectonic plates, here:
https://brainly.com/question/30805154
#SPJ3
50 POINTS
Gizmos Moles Activity - chemistry
can someone please help me out
Answers
there is how I would answer it.
If the prescribed dosage of milk of magnesia Mg(OH)2 is 3.5 moles, how many grams
would you need to take? Round to the nearest tenth (one digit after the decimal).
A. 92.1 g
B. 204.2g
C. 157.2 g
D. None of the above
Answers
Answer:
B
Explanation:
1 mole is equal to 58.31968 grams.
so 3.5 moles equal to answer choice B
How do you name branched-chain alkanes?
Answers
Answer:
Explanation:
Branches or side chains are called alkyl radicals, they are named substituting the termination -ano for -yl or -il when it is part of a hydrocarbon.
Zach invited his friend Sydney to a pool party over the weekend. Sydney informed Zach that the climate was supposed to be rainy over the weekend and suggested that he change his plans. Zach explained to Sydney that she had misused the word “climate” and she should have used the word “weather” instead. Which of the following statements accurately clarifies the confusion between Zach and Sydney?
A). Zach is correct; the weather for this area is typically tropical and wet.
B). Sydney is correct; there has been an abundance of rainfall within the last month, changing the climate of this particular area.
C). Zach is correct; the climate of an environment is determined by patterns in weather conditions over an extended period of time.
D). Sydney is correct; the climate of an environment can change constantly based on weather, wind, and front patterns in the area.
Answers
Answer:
C
Explanation:
Common sense
Fluorine, chlorine, and bromine react with gold.
which 1 of the 3 elements will be the most reactive with gold
thanks
Answers
Answer:
gold i believe or possibly bromine
Explanation:
q- how does fluorine react with gold
a- this fluoride compound features gold in its highest known oxidation state. this red solid dissolves in hydrogen fluoride, but these solutions decompose, liberating fluorine.
q- how does chlorine react with gold
a- gold does react with halogens. it'll, for example, react very slowly with chlorine gas at room temperature to form gold chloride, AuCl3. if gold chloride is heated gently, it will decompose to release the pure elements again.
q- how does bromine react with gold
a- gold in bromine solutions dissolves according to electrochemical/chemical (EC) mechanisms. ... in the chemical composition of the mechanism, this monovalent gold bromide disproportionate into gold and stable AuBr −4 , which reports into solution. with respect to pH, there are two characteristic dissolution regions.
** sorry that i can't provide a sure answer**
good luck :)
i hope this helps
have a nice day!
Fluorine will be most reactive with gold.
What is fluorine?
Of almost all of the elements, fluorine seems to be the most electronegative as well as reactive. Fluorine would be a diatomic, pale yellow, extremely corrosive, combustible gas with a strong smell. The lightest halogen would that be. It produces oxygen and even the incredibly corrosive hydrofluoric acid when it combines strongly with water.
What is reactive?Reactivity would be a substance's capacity to chemically combine with several other substances. Iron, for instance, reacts vigorously with oxygen.
As you move down the group, the halogens, which are non-metal elements in Group 7, become less reactive. In contrast to the alkali metals within Group 1 of the particular periodic table, this trend is the opposite. One of the most reactive elements in Group 7 was fluorine.
To know more about fluorine.
https://brainly.com/question/1940697
#SPJ3
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
2.How can you change the chemical equilibrium to benefit the company? What benefits will be realized?
Answers
Answer:
Explanation:
2NH3(g)(→ N2(g)(+(3H2(g)
Eventually, these two reactions occur at the same rate. When this happens,
the concentrations of nitrogen, hydrogen, and ammonia become constant, and the
system is said to be “at equilibrium”. Typically,
we represent chemical equilibrium
using a double-headed reaction arrow:
Two reactant particles collide with proper orientation. The collision will be effective if the particles have
(A) sufficient potential energy
(B) high activation energy
(C) high ionization energy
(D) sufficient kinetic energy
And explain why, and answer in brainly
Answers
The collision will be effective if the particles have sufficient kinetic energy (Option D).
Kinetic energy is motion energy, conversely to potential energy.Kinetic energy is required to produce the collision between particles.The more kinetic energy the particles have, then the more collision will occur, thereby it increases the rate of a chemical reaction.In conclusion, the collision will be effective if the particles have sufficient kinetic energy (Option D).
Learn more in:
https://brainly.com/question/25959744
How many atoms does 9.3 moles of Mo represent?
Answers
Answer:
5.60 × 10²⁴ Mo atomsExplanation:
The number of atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
N = 9.3 × 6.02 × 10²³
We have the final answer as
5.60 × 10²⁴ Mo atomsHope this helps you
______ is the tendency of an organism to maintain a constant and stable internal environment
Answers
Answer:
Homeostasis is the answer
Explanation: it maintains a constant and stable environment
Which of the following is not a force
A. Weight
B. Friction
C. Acceleration
D. Air resistance
Answers
Answer:
Acceleration
Explanation:
Acceleration doesn't change one moment to the next, and therefore, doesn't count as a force.
The answer option which is not a force is: C. Acceleration.
What is a force?A force can be defined as a push or pull of an object or physical body, which typically results in a change of motion (acceleration), especially due to the interaction of the object with another.
The examples of a force.In Science, the three (3) most common examples of a force include the following:
WeightFrictionAir resistanceIn conclusion, acceleration is not an example of a force but a change in the rate of velocity of an object with respect to time.
Read more on force here: brainly.com/question/1121817
What is the volume, in liters, of 2.75 grams of fluorine gas at 35.0°C and 4.55 atm pressure?
Answers
•n =mass in grams of flourine /molar mass
• R=0.0821
•temp must be in kelvins (+273)
volume will be in dm3 which is equals to litres
try it by yourself
good luck
The volume (in litres) of 2.75 g of fluorine gas at 35 °C and 4.55 atm is 0.402 L
How to determine the mole of fluorine gasMass of F₂ = 2.75 gMolar mass of F₂ = 2 × 19 = 38 g/mol Mole of F₂ =?
Mole = mass / molar mass
Mole of F₂ = 2.75 / 38
Mole of F₂ = 0.0724 mole
How to determine the volume Temperature (T) = 35 °C = 35 + 273 = 308 KPressure (P) = 4.55 atmGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) = 0.0724 moleVolume (V) =?Using the ideal gas equation, the volume of the gas can be obtained as follow:
PV = nRT
Divide both side by P
V = nRT / P
V = ( 0.0724 × 0.0821 × 308) / 4.55
V = 0.402 L
Learn more about ideal gas equation:
https://brainly.com/question/4147359
Please someone help me and all of the terms do not have to eh used
Answers
Answer:
The correct answer is -
1. D. mold
2. A. Cast
3. F. trace fossil
4. C. original material fossils
5. B. fossil record.
Explanation:
Mold is the impression of an organism in a rock that occurs due to the complete dissolving of the organism and only an impression left in sedimentary rocks.
The cast is a fossil copy of an organism in a rock that takes place when water-containing minerals fill the molds and creates a three-dimension copy of the fossil.
Trace fossils are the fossils that are preserved in such a manner that records of biological activity stored only instead of remains of plants or animals.
Storing originals animals or parts of the remaining such as tissue of an organism in natural form is known as original-material fossils.
Fossil records are the fossils ever found or discovered on the earth.
How many atoms of carbon are in diamond
Answers
Answer:
A diamond contains 5.0 x 10 21 atoms of carbon.
Exothermic reactions have _____ net bond energy.
A) positive
B) negative
C) neutral
Answers
This gland of the endocrine and digestive systems produces insulin to help control the body's sugar levels and enzymes which aid in digestion.
Answers
Answer:
Pancreas.
Explanation:
Living systems are self-organized life forms and are known to be very much interactive with their surroundings or environment. Also, living systems are dependent on the flow of information, matter and energy at various levels.
Some examples of living systems in organisms are respiratory system, nervous system, digestive system, and circulatory system.
Additionally, living systems comprises of the following components; cells, organs, muscle, tissues, blood, etc.
An endocrine system refers to a series of ductless glands and organs responsible for the production and secretion of hormones that are used by the body for the performance of various functions such as metabolism, controlling growth, reproduction, mood, sleep, etc. These hormones are secreted directly into the circulatory system (blood) and then transported to the organs and tissues in the body.
Pancreas is one of the glands of the endocrine and digestive systems that produces insulin to help control the body's sugar levels and enzymes which aid in digestion.
A piece of metal is composed of atoms. Each atom in the metal contains 29 protons. How is the metal classified?
Answers
Answer:
Explanation:
The metal is classified as a transition metal or transition element. In particular, this atom is Copper it has an atomic number of 29 which we know by the number of protons. The number of protons in an atom is the same as the atomic number.
Answer:
Copper
Explanation:
Each atom in the metal contains 29 protons.
Why do you think we use heat to dissolve sodium tetraborate?
Answers
Answer:
Explanation:90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u this is irrelevent but idrc lol
