A3 kg mass takes some impulse in order increase its velocity from 11
m/s to 25 m/s. Calculate the impulse it took.
Answer:
JAKSJAKZNPWLAQJZOAKZONZPW
THE ANSWER IS FAILURE
What provides most of the force to allow the runners to move?
Answer:
When you are running the most important force that you should understand is friction. Friction is a force that opposes movement between two objects, but for runners friction makes you faster. Friction gives you a better and more efficient way to use your energy into speed.
The reaction force provided by the tracks as the runners press their feet against the track provides the maximum force.
What is newtons third law of motion?The newton's third law of motion states that every action has a equal and opposite reaction
Given is to find what force allow the runners to move.
The reaction force provided by the tracks just before the runners start running as they press their feet against the track provides the maximum force.
Therefore, the reaction force provided by the tracks as the runners press their feet against the track provides the maximum force.
To solve more questions on force, visit the link below -
https://brainly.com/question/3952884
#SPJ6
A rotating paddle wheel is inserted in a closed pot of water. The stirring action of the paddle wheel heats the water. During the process, 30 kJ of heat is transferred to the water and 5 kJ is lost to the surrounding air. The paddle wheel work amounts to 500 J. Determine the final energy of the system if its initial energy is 10 kJ.
Answer:
the final energy of the system is 35.5 kJ.
Explanation:
Given;
initial energy of the system, E₁ = 10 kJ
heat transferred to the system, q₁ 30 kJ
Heat lost to the surrounding, q₂ = 5kJ
heat gained by the system, Q = q₁ - q₂ = 30 kJ - 5kJ = 25 kJ
work done on the system, W = 500 J = 0.5 kJ
Apply first law of thermodynamic,
ΔU = Q + W
where;
ΔU is change in internal energy
Q is the heat gained by the system
W is work done on the system
ΔU = 25kJ + 0.5 kJ
ΔU = 25.5 kJ
The final energy of the system is calculated as;
E₂ = E₁ + ΔU
E₂ = 10 kJ + 25.5 kJ
E₂ = 35.5 kJ.
Therefore, the final energy of the system is 35.5 kJ.
Three point charges are fixed in place in a right triangle, as shown in the figure.
What is the magnitude of the electric force on the +1.00-C charge due to the other two charges?
What angle does the force make with the -x-axis? A positive angle is counterclockwise from the -x-axis.
For the three-point charges fixed in a right triangle, we have:
1. The magnitude of the electric force on the +1.00 μC charge is 1.79 N.
2. The force does an angle of 21.68° with the x-axis.
1. Magnitude of the electric forceFirst, let's denote the charges as is shown in the picture below:
q₁: is the charge 1 = +0.800 μC = +0.800x10⁻⁶ Cq₂: is the charge 2 = +1.00 μC = +1.00x10⁻⁶ Cq₃: is the charge 3 = -0.600 μC = -0.600x10⁻⁶ C
The magnitude of the electric force on the charge 2 (+1.00 μC) is given by:
[tex]|F_{net}| = \sqrt{(\Sigma\vec{F}_{x})^{2} + (\Sigma\vec{F}_{y})^{2}}[/tex] (1)
Where:
[tex]\Sigma\vec{F}_{x}[/tex]: is the sum of the forces acting on the x-axis[tex]\Sigma\vec{F}_{y}[/tex]: is the sum of the forces acting on the y-axisWe can calculate the electrical forces with Coulomb's law:
[tex]\vec{F} = \frac{Kq_{1}q_{2}}{d^{2}}[/tex]
Where:
K is the Coulomb's constant = 9.00x10⁹ Nm²/C² q₁ and q₂ are the chargesd is the distance between the charges
Forces in the x-axis ([tex]\Sigma\vec{F}_{x}[/tex])
The forces in the x-component are given by:
[tex]\Sigma\vec{F}_{x} = \vec{F}_{21}_{x} + \vec{F}_{23}_{x}[/tex]
[tex]\Sigma\vec{F}_{x} = \vec{F}_{21}_{x}cos(\theta) + \vec{F}_{23}_{x}[/tex]
[tex]\Sigma\vec{F}_{x} = \frac{Kq_{1}q_{2}}{d_{12}^{2}}cos(\theta) + \frac{Kq_{2}q_{3}}{d_{23}^{2}}[/tex] (2)
Where:
θ: is the angle of the force F₂₁ with the x-axisd₁₂ = z = 9.60 cm = 0.0960 m d₂₃ = xWe can calculate the angle θ with the following trigonometric function:
[tex]sin(\theta) = \frac{y}{z}[/tex]
[tex]\theta = sin^{-1}(\frac{y}{z}) = sin^{-1}(\frac{8.10 cm}{9.60 cm}) = 57.5 ^\circ[/tex]
To find the distance x (d₂₃), we need to use Pythagoras:
[tex]x = \sqrt{z^{2} - y^{2}} = \sqrt{(0.0960 m)^{2} - (0.0810 m)^{2}} = 0.051 m[/tex]
After entering θ and x (d₂₃) into equation 2, we have:
[tex]\Sigma\vec{F}_{x} = \frac{9.00\cdot 10^{9} Nm^{2}C^{-2}(0.800 \cdot 10^{-6} C)(1.00 \cdot 10^{-6} C)}{(0.0960 m)^{2}}cos(57.5) + \frac{9.00 \cdot 10^{9}Nm^{2}C^{-2}(1.00 \cdot 10^{-6} C)(-0.600 \cdot 10^{-6} C)}{(0.051 m)^{2}}[/tex]
[tex]\Sigma\vec{F}_{x} = [0.78*cos(57.5) + (-2.08) N] = -1.66 N[/tex]
Hence, the x-component of the force is -1.66 N.
Forces in the y-axis ([tex]\Sigma\vec{F}_{y}[/tex])
The only force acting on the y-axis is the y-component of the force F₂₁, so:
[tex]\Sigma\vec{F}_{y} = -\vec{F}_{21}_{y} = -\vec{F}_{21}sin(\theta)[/tex]
The minus sign is because the vector is pointing in the negative y-direction (see the picture below).
[tex]\Sigma \vec{F}_{y} = -\frac{9.00\cdot 10^{9} Nm^{2}C^{-2}(0.800 \cdot 10^{-6} C)(1.00 \cdot 10^{-6} C)}{(0.0960 m)^{2}}sin(57.5) = -0.66 N[/tex]
Hence, the y-component of the force is -0.66 N.
Finally, the magnitude of the electric force on the charge +1.00 μC is (eq 1):
[tex]|F_{net}| = \sqrt{(-1.66 N)^{2} + (-0.66 N)^{2}} = 1.79 N[/tex]
Therefore, the magnitude of the electric force on the +1.00 μC charge is 1.79 N.
2. Direction of the force with the x-axisAccording to the picture below, the angle of the force with respect to the x-axis is given by:
[tex]tan(\beta) = \frac{\Sigma\vec{F}_{y}}{\Sigma\vec{F}_{x}}[/tex]
[tex]\beta = tan^{-1}(\frac{-0.66 N}{-1.66 N}) = 21.68 ^\circ[/tex]
Therefore, the force does an angle of 21.68° with the x-axis.
Find more about Coulomb's law here:
brainly.com/question/506926
I hope it helps you!
Question 11 (1 point)
Anytime there is height, the object must have...
a
kinetic energy
gravitational potential energy
GPE & KPE
C
Od
elastic potential energy
Answer:
gravitational potential energy.
Explanation:
Gravitational potential energy (GPE) can be defined as an energy possessed by an object or body due to its position above the earth surface.
Mathematically, gravitational potential energy is given by the formula;
[tex] G.P.E = mgh[/tex]
Where,
G.P.E represents gravitational potential energy measured in Joules.
m represents the mass of an object.
g represents acceleration due to gravity measured in meters per seconds square.
h represents the height measured in meters.
This ultimately implies that, anytime there is height, the object must have gravitational potential energy.
Hence, an object possesses gravitational potential energy due to its height (position) and the earth's gravitational force.
Define :density٬archimedes principle
Answer:
density is defined as the amount of mass contained in unit volume of a body .its si unit is kg/m*3
Answer:
Density is the amount of mass per unit volume of a substance.
Archimedes principle states that"When a body is totally or partially immersed in a liquid,it experience an upthrust which is equal to the weight of the liquid displaced"
give two differences between sextusl reproduction and asextual reproduction
Answer:
Sexual reproduction you need two organisms to reproduce.
Asexual is when you can multiply yourself and there is nothing different about the offspring and the parent.
When potassium chromate (K2CrO4) is added to a solution containing 0.500 g silver nitrate (AgNO3), solid silver chromate (Ag2CrO4) is formed. a) Determine the chromate precipitate
Answer:
OK id k the names of everything but the quantity would be around 2.22222222222222222222222222222222222222222222222222222222222222222222222222222 ok?
Explanation:
A pendulum Bob released from some initial height such that the speed of the bob at the bottom of the swing is 1.9m/s. What is the initial height of the bob?
Answer:
h = 18.4 cm
Explanation:
Given that,
The speed of the bob at the bottom of the swing is 1.9m/s.
We need to find the initial height of the bob. Let it is h.
We can find it using the conservation of energy i.e.
[tex]mgh=\dfrac{1}{2}mv^2[/tex]
Where
v is speed of the bob
So,
[tex]h=\dfrac{v^2}{2g}\\\\h=\dfrac{(1.9)^2}{2\times 9.8}\\\\h= 0.184\ m[/tex]
or
h = 18.4 cm
So, the initial height of the bob is 18.4 cm.
The initial height of bob will be "18.4 cm".
Speed and height:Speed would be the scalar quantity that describes "how quickly an attribute moves." This could sometimes be defined as this same rate whereby an object travels a given distance.
According to the question,
The speed of the bob = 1.9 m/s
Let,
The initial height be "h".
By using the conservation of energy, we get
→ mgh = [tex]\frac{1}{2}[/tex]mv²
or,
→ h = [tex]\frac{v^2}{2g}[/tex]
By substituting the values, we get
= [tex]\frac{(1.9)^2}{2\times 9.8}[/tex]
= 0.184 m or,
= 18.4 cm
Thus the above answer is correct.
Find out more information about speed here:
https://brainly.com/question/13665920
what scale ranks minerals from softest to hardest
Answer: Mohs Scale
Explanation: Mohs Scale of Hardness
hope this helped!!!!!!!!!!!
image.
A concave lens always produces a(n)
A. inverted
o
B. real
C. virtual
D. magnified
Answer:
Explanation:
Its Virtual, how would you describe the image formed by a convex mirrior? virtual upright, smaller
Use the graph one more time to help you with this question. Changes in both the North and South occurred due to the .
Answer:
industrial revolution
Explanation:
Explain why stones are strong in compression but weak in tension
Answer:
Gigantic towers, monuments and tall structures are always supported by a very thick layer of concrete that’s blended into their foundation. The purpose of this is quite straightforward: nothing provides greater support to a super heavy (and stationary) structure than a layer of concrete. There may be other things that, in theory, could provide a stronger foundation, but they wouldn’t be nearly as cost effective as concrete.
Answer:
Because it has essentially zero strength in tension, it is almost always used as reinforced concrete, a composite material. It is a mixture of sand, aggregate, cement and water.
A 2.70 kg book rests on an incline of 13.0. You give it a sharp push up the frictionless ramp. It comes to a stop in 25.25 at 17.5 m up the ramp before starting its descent(a) What is the magnitude of the normal force on the book
Answer:
the magnitude of the normal force on the book is 25.78N
Explanation:
The computation of the magnitude of the normal force on the book is shown below
Normal force = N is
= mgcosβ
= 2.70 × 9.8 × cos13°
= 25.78N
hence, the magnitude of the normal force on the book is 25.78N
The above formula should be applied
At the bottom of a mine shaft, the air
pressure is 138,000 Pa. How deep is
the mine?
(Unit = m)
1 atm = 101300 Pa
Pair = 1.29 kg/m3
Plz help
Answer:2900
Explanation:
I think
A 20.0 newton force is used to push a 2.00 kilogram cart a distance of 5.00 meters how much work is done on the cart
Answer:
100
w=f*s
20*5=100....
100 Joules of work is done on the cart.
What is Work done?Work done by a force is defined as the product of the displacement and the component of the applied force on the object in the direction of displacement. When we push a block with some force, the body moves with some acceleration, so it is called work done.
Work done is expressed as W=Fd and its unit is joules which can be defined as the amount of work done by a force in Newton is applied to an object, as a result of which it is displaced in meter.
For above given information,
Force= 20 N
Distance= 5 m
So, work done= 20*5= 100 Joules
Thus, 100 Joules of work is done on the cart.
Learn more about Work done, here:
https://brainly.com/question/13662169
#SPJ2
Can heating cooking oil you’ll be classified as producing a chemical change?
yes it is boiling creating bubbles that aren't their originally
Explanation:
When cooking oils are subjected to heat in the presence of air and water (from food), such as in deep-fat frying and sautéing (pan frying), they can undergo at least three chemical changes: 1) oxidation of the fatty acids, 2) polymerization of the fatty acids, and 3) breaking apart of the triglyceride molecules into free fatty acids and glycerol by hydrolysis (reaction with water from the food being cooked) (Choe and Min 2007)
often occurs at subduction zones. Check all that apply:
O convergence
trench
upward convection currents in the mantle below it
Orifts
most volcanoes...Pacific Ring of Fire
continental plate subducts because it's less dense
Answer:
convergence and trench
Explanation:
LOL
Which of the following has the most kinetic energy?
A.
A car traveling at 80 kph.
B.
A tractor trailer traveling at 80 kph.
C.
A cheetah running at 80 kph.
D.
A notorcycle traveling at 80 kph.
Answer:
B
Explanation:
A tractor is the heaviest
A spacecraft drifts through space at a constant velocity. Suddenly, a gas leak in the side of the spacecraft gives it a constant acceleration in a direction perpendicular to the initial velocity. The orientation of the spacecraft does not change, so the acceleration remains perpendicular to the original direction of the velocity. What is the shape of the path followed by the spacecraft in this situation
Answer: The path will be a parabola.
Explanation: The path is a parabola because the motion described is a projectile motion, in which an object thrown or projected is subjected only to the acceleration.
In this motion, velocity must be constant and horizontal and acceleration is perpendicular compared to the direction of the velocity. In these conditions, the path is a parabola and the motion is a projectile.
Shine the flashlight on the liquid sheet. Did you observe evidence that light carries energy
Answer:
Think of an object you have observed ... Work with your group to gather evidence that light carries energy, then answer the questions below. Shine the flashlight on the liquid crystal sheet.
When one person shouts at a football game, the sound intensity level at the center of the field is 69.6 dB. When all the people shout together, the intensity level increases to 103 dB. Assuming that each person generates the same sound intensity at the center of the field, how many people are at the game
Answer:
there are 2188 people at the game
Explanation:
Given the data in the question;
we know that decibel is defined as; dB = 10log(l/l₀)
so if one produces an intensity l₁, it results in 69.6 dB
69.6 = 10log(l₁/l₀) ---- equ1
also. if x number of people produces this intensity, it result to 103 dB
103 = 10log(xl₁/l₀)
103 = 10( log(l₁/l₀) + log(x) )
103 = 10log(l₁/l₀) + 10log(x) ----- equ2
input equation 1 into to equation 2
103 = 69.6 + 10log(x)
10log(x) = 103 - 69.6
10log(x) = 33.4
divide both side by 10
log(x) = 3.34
x = [tex]10^{3.34}[/tex]
x = 2187.76 ≈ 2188
Therefore, there are 2188 people at the game
Determine the position of a train moving at 45 m/s after 5 minutes.
The train has covered 13,500 meters of track.
We don't know its position, because we don't know where it started from, and we don't know how straight the track is.
Need help guys please
Answer:
c is the answer,................
Which diagram is the best model for a solid?
Substance A
Substance B
О Substance C
Answer:
This link was diagram
Explanation:
https://doubtnut.app.link/FnsNC80Dccb
what is a likely consequence of continued human population growth
Answer:
Rapid human population growth has a number of consequences. Population grows fastest in the world's poorest countries. High fertility rates have historically had a strong relation with poverty, and high childhood mortality rates
Explanation:
i got it from goo.gle but i hope that helps:)
have a good day bro
A light source emits light with dominant wavelengths in the range of 650 to 690 nm. what is the principle color of light emitted by the source?
Answer:
Please see below as the answer is self-explanatory.
Explanation:
The visible range extends roughly from 400 nm (violet) to 700 nm (red).Below the violet is the ultra-violet spectrum (with higher energy) and above red, we have the infra-red spectrum.The wavelengths in the range of 650 to 690 nm have red as the dominant color.- What is the mass of a bowling ball that weights 80 Newtons on Earth?
(17 Points)
8 kg
80 kg
800 kg
Answer:
800 kg
Explanation:
Problem 3 (a) Assuming the human body (skin temperature 34◦C) to behave like an ideal thermal radiator, find the wavelength where the intensity from the body is a maximum. In what region of the electromagnetic spectrum is radiation with this wavelength? (b) Making whatever (reasonable) assumptions you may need, estimate the power radiated by a typical person isolated from the surroundings. (c) Estimate the radiation power absorbed by a person in a room in which the temperature is 20◦C.
Answer:
Explanation:
a )
We shall apply Wein's displacement law
λm x T = b where λm is wavelength of radiation having maximum intensity
T is absolute temperature of body , and b is a constant
b = 2898 μm-K
T = 273 + 34 = 307 K
λm x 307 = 2898
λm = 9.44 μm
= 9440 nm
It is infrared radiation .
b )
We shall apply Stefan's law of radiation.
E = σA T⁴
E is emitted radiation by body acting as black body , A is surface area , T is absolute temperature of body
σ = 5.67 x 10⁻⁸ J / m²T⁴
Surface area of a typical man's body A = 1.9 m²
T = 273 + 34 = 307 K
Assuming human body as black body
E = 5.67 x 10⁻⁸ x 1.9 x 307⁴ J/s
= 9.57 x 10² J/s
= 957 W .
c )
Radiation absorbed
E = 5.67 x 10⁻⁸ x 1.9 x ( 273 + 20 )⁴ J/s
= 794 W .
Describe 2 characteristics of the spring tide. *
Answer:
Spring tide, tide of maximal range, near the time of new and full moon when the Sun and Moon are in syzygy—i.e., aligned with the Earth. ... In either case of syzygy, the tide-producing forces of the Sun and the Moon reinforce each other, and the tidal amplitudes on Earth are at their greatest.
