i need help asap !!!

Answer:

The 95% confidence interval for the mean time for all players, in minutes, is: (7.95, 11.01).

Step-by-step explanation:

We have the standard deviation for the sample, which means that the t-distribution is used to solve this question.

The first step to solve this problem is finding how many degrees of freedom,which is the sample size subtracted by 1. So

df = 10 - 1 = 9

95% confidence interval

Now, we have to find a value of T, which is found looking at the t table, with 9 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.95}{2} = 0.975[/tex]. So we have T = 2.2622.

The margin of error is:

[tex]M = T\frac{s}{\sqrt{n}} = 2.2622\frac{2.14}{\sqrt{10}} = 1.53[/tex]

In which s is the standard deviation of the sample and n is the size of the sample.

The lower end of the interval is the sample mean subtracted by M. So it is 9.48 - 1.53 = 7.95 minutes.

The upper end of the interval is the sample mean added to M. So it is 9.48 + 1.53 = 11.01 minutes.

The 95% confidence interval for the mean time for all players, in minutes, is: (7.95, 11.01).

Answer:

8 113/1000(as a mixed number)      8113/1000(as an improper fraction)

Step-by-step explanation:

1. Convert 0.113 to a fraction...113/1000

2. As there is no further simplification needed, add 8 to 113/1000....8 113/1000

3. To convert 8 113/1000 from a mixed number to an improper fraction, multiply 8 (the whole number) and 1,000(the denominator)...8,000. Then add 113 (the numerator) to 8,000...8113. After that, you put 8113 over the denominator of the previous mixed number, getting 8113/1000 as the improper fraction.

Answer:

Step-by-step explanation:

A=(-1,5)

B=(5,2)

P=(x,y)

AP²=(x+1)²+(y-5)²=x²+2x+1+y²-10y+25

BP²=(x-5)²+(y-2)²=x²-10x+25+y²-4y+4

AP²=BP² ==> 12x-6y=3 or y=2x-1/2

Proof:

[tex]AB\ slope=\dfrac{2-5 } { 5+1 } =-\frac { 1 } { 2 } \\\\perpendicular\ slope =2\\\\middle\ of\ AB=(2, \frac{7}{2} )\\\\perpendicular\ bisector:\ y-\frac{7}{2} =(x-2)*2\\\\y=2x-\dfrac{1}{2} \\\\[/tex]

9514 1404 393

Answer:

corresponding: (1, 5), (2, 6), (3, 7), (43°, 4)4)

Step-by-step explanation:

In this geometry, "corresponding" angles are in the same direction from the point of intersection of the transversal with the parallel line.

"Alternate" refers to angles on opposite sides of the transversal. "Interior" and "exterior" refer to angles between and outside of the parallel lines, respectively.

Here, we list all angle pairs in each classification, so you can answer questions 1-12 based on this list.

alternate interior: (2, 4), (3, 5)

alternate exterior: (1, 7), (43°, 6)

corresponding: (1, 5), (2, 6), (3, 7), (43°, 4)

__

Additional classifications are also used:

consecutive (same-side) interior: (2, 5), (3, 4)

consecutive (same-side) exterior: (1, 6), (43°, 7)

vertical: (1, 3), (2, 43°), (4, 6), (5, 7)

linear pairs: (1, 2), (1, 43°), (2, 3), (3, 43°), (4, 5), (4, 7), (5, 6), (6, 7)

Answer:

5 cm

Step-by-step explanation:

Let x = width of frame.

The width of the frame is added all around the painting, so you must add 2x to the length of the painting and 2x to the width of the painting to find the total length and width including the frame.

painting length: 30

total length: 2x + 30

painting width: 20

total width: 2x + 20

total area = LW

total area = (2x + 30)(2x + 20)

total area = 1200

(2x + 30)(2x + 20) = 1200

(x + 15)(x + 10) = 300

x^2 + 10x + 15x + 150 = 300

x^2 + 25x - 150 = 0

(x - 5)(x + 30) = 0

x - 5 = 0  or  x + 30 = 0

x = 5  or x = -30

The width of the frame cannot be a negative number, so we discard the solution x = -30.

Answer: 5 cm

Juice in a juice box is usually measured in ounces.

Answer:

4

Step-by-step explanation:

If 1/20 of the metal is lost during casting. Calculate the number of complete slabs casted. (4mks)

======================================================

Work Shown:

sin(angle) = opposite/hypotenuse

sin(29) = x/24

24*sin(29) = x

x = 24*sin(29) ..... exact value

x = 11.635430885912 .... approximate value

x = 11.6

To get the approximate value, you'll need a calculator. Make sure the calculator is in degree mode.

Answer:

The difference quotient is the quotient of the difference of the function values, f(x + h) - f(x), and the difference of the input values, (x + h) - x.

Given the function f(x) = -x + 21.

The different quotient will be : [tex]\frac{f(x+h)-f(x)}{(x+h)-x} =\frac{f(x+h)-f(x)}{h} = \frac{(-(x+h)+21)-(-x+21) }{h} = \frac{-x-h+21+x-21}{h} = \frac{-h}{h} = -1[/tex]

We see that given the function f(x) = -x+21 and two input values of x and x + h, the difference quotient is -1.

Answer:

D

Step-by-step explanation:

Answer:

the probability of taking a clear picture of a California candor is .24

Answer:

135.7 yd²

Step-by-step explanation:

Surface area of the cone,

πr²+πrl

= π×3²+π×11.4×3

= 43.2π

= 135.7 yd² (rounded to the nearest tenth)

9514 1404 393

Answer:

  A.  4 feet/(1 second)

Step-by-step explanation:

A "unit" is one of something. A unit rate is a rate that has 1 of something in the denominator. Look down the list at the denominators and find the value that has 1 as a denominator:

  [tex]\dfrac{4\text{ feet}}{1\text{ second}}[/tex]

Answer:

8

Step-by-step explanation:

mean of A=28+23+30+25+27/5 = 26.6

average of B=22+19+15+17+20/5 = 18.6

now,

difference= 26.6-18.6

=8,,

Answer:

3/5

Step-by-step explanation:

sin=opp/hyp

sinc=24/40=3/5

Answer:

d) Asking questions to make sure they understand what's being said

Step-by-step explanation:

Asking questions is important for learning and clears up any confusion.

Answer:

a. 168000 for Eyeconnect, 132000 for Topconnect

b. 100,000

Step-by-step explanation:

a.

Because the change in customers are only due to leaving companies, we can say that, after one year, Eyeconnect loses 10% of its customers to Topconnect and Topconnect loses 5% of its customers to Eyeconnect. This represents all changes in customers.

First, we can calculate how much Eyeconnect loses, which is 10% of 180,000 = 0.1 * 180,000 = 18,000 . They then have 180,000 - 18,000 = 162,000 employees

Next, Topconnect loses 120,000 * 5% = 120,000 * 0.05 = 6,000. They then have 120,000-6,000 = 114,000 employees

We can then add the customer amounts. Note that we are subtracting both sides before adding as both companies gain and lose customers simultaneously.

We can then add how much one company lost to the other company's customers.

Eyeconnect gains 6,000 customers, so they then have 162,000 + 6,000 = 168000 employees. Topconnect gains 18,000 customers so they then have 114,000 + 18,000 = 132,000 employees

b.

After many years, the number of customers Eyeconnect has will be less than the number of customers that Topconnect has. One way to find the end amount of customers that Eyeconnect has is to figure out when the customer bases even out, or when Eyeconnect loses the same amount of customers as Topconnect so the customer base stays the exact same. We know that no customers leave or join the companies except to leave/join the other, so the total amount of customers between the two companies stays the exact same. The amount of customers is 180,000 + 120,000 = 300,000. Therefore, at the end amount,

Eyeconnect customers (E) + Topconnect customers (T) =300,000

Furthermore, if the amount of customers that leave Eyeconnect is the same that leaves Topconnect, we can say

E * 0.1 = T * 0.05

divide both sides by 0.05 to isolate the T

E * 0.1 / 0.05 = T

2 * E = T

plug that into the first equation

E + 2 * E = 300,000

3 * E = 300,000

divide both sides by 3 to isolate E

E = 100,000 after many years

Answer:

A

Step-by-step explanation:

Try graphing the function on desmos

Answer:

pretty sure its D

Answer:

I have to give 2 Ans for my question

Events are said to be INDEPENDENT if the occurence of one does not rest or depend on the outcome of another. Therefore, since the outcome of event A and B does not depend on each other, then both events are INDEPENDENT

Giving a brief description of the options given :

• Dependent events are simply events where the outcome of one event affects the occurence of the other. This is usually related to selection without replacement, where the number of subjects changes after each selection.

• Mutually Exclusive events simply refers to a scenario whereby two events cannot occur simultaneously. For instance, obtaining a head and a tail simultaneously during a single coin throw.

• Complement events describes two exactly opposite events. For instance, the Complement of obtaining a 4 on a 6 - sided die roll is (1, 2, 3, 5, 6)

For the event described above , the occurrence of A does not hinder the occurrence of the other (not a dependent event ) and it is possible to have both events simultaneously (not Mutually exclusive) (If we have 3 in all throws then both events have occurred )

Therefore, the best description for events A and B is that both events are INDEPENDENT.

Learn more about independent events :

https://brainly.com/question/1393117

Answer: the answer is dependent

Step-by-step explanation:

Events are independent if the knowledge of one event occurring does not affect the chance of the other event occurring. In this case, the chance of Event B occurring is greater if Event A occurs, so these events are dependent. Since the spinner could land on 3, 3, and 3, the events are not mutually exclusive.

Answer:

Kindly check explanation

Step-by-step explanation:

The variables in the heavenly chocolate dataset is attached below :

Variables are classed as either Categorical or Quantitative.

Categorical variables are used for non - numeric variables which are used to group values based on labels whole quantitative variables are those which are numeric.

Therefore, the variables ;

Customer = Quantitative (represented with number values)

Day = Categorical (Non-numeric)

Browser = Categorical (Non - numeric)

Time = Quantitative (contains numeric values)

Pages viewed = Quantitative (contains numeric values)

Amount spent = Quantitative (contains numeric values)

Quantitative variables are most appropriate to summarize using ungrouped frequency as the attributed of the data can be adequately ibtia Ed without have to seperates or place data into categories.

Answer:

2x-3x+1

Step-by-step explanation:

f'(x,y)=2x-3x+1

Answer:

Y=Srt(12xs^2/z^2)

Step-by-step explanation:

Firstly

We multiply both sides with 1/x^2

We get

Y^2=12/z^2*1/x^2

Y^2=12x^2/z^2

Next: introduce a srt root

We have

Y=srt(12x^2/z^2)

Step-by-step explanation:

simple formula application :

a1 = 8 + 3×(1-1) = 8

a2 = 8 + 3×(2-1) = 11

a3 = 8 + 3×(3-1) = 14

a4 = 8 + 3×(4-1) = 17

...

Answer:

Point D

Step-by-step explanation:

CD and MD share a common point, so it is the intersection

D

If my answer is incorrect, pls correct me!

If you like my answer and explanation, mark me as brainliest!

-Chetan K

Answer:

Step-by-step explanation:

8/5 = 16/10 = 24/15

8:5 = 16:10 = 24:15

Answer:

The probability will 4.32%.

The probability that all four are brown is 35/8,64,501.

Given that, A group of hens lays 69 eggs in a single day. On one particular day, there were 7 brown eggs and 62 white eggs.

Probability without replacement means once we draw an item, then we do not replace it back to the sample space before drawing a second item. In other words, an item cannot be drawn more than once.

If four eggs are selected at random, without replacement, the probability that all four are brown is 7/69 × 6/68 × 5/67 × 4/66

= 7/69 × 3/34 × 5/67 × 2/33

=7/23 × 1/17 × 5/67 × 1/33

=35/8,64,501

Therefore, the probability that all four are brown is 35/8,64,501.

To learn more about the probability visit:

https://brainly.com/question/11234923.

#SPJ2

Answer:

B the range, the x- and y-intercept

Step-by-step explanation:

the domain stays the same : all values of x are possible out of the interval (-infinity, +infinity).

but the range changes, as for the original function y could only have positive values - even for negative x.

the new function has a first term (with b) that can get very small for negative x, and then a subtraction of 2 makes the result negative.

the y-intercept (x=0) of the original function is simply y=1, as b⁰=1.

the y-intercept of the new function is definitely different, because the first term 3×(b¹) is larger than 3, because b is larger than 1. and a subtraction of 2 leads to a result larger than 1, which is different to 1.

the original function has no x-intercept (y=0), as this would happen only for x = -infinity. and that is not a valid value.

the new function has an x-intercept, because the y-values (range) go from negative to positive numbers. any continuous function like this must therefore have an x-intercept (again, y = the function result = 0)

[tex] 3 {b}^{x + 1} = 2[/tex]

[tex] {b}^{x + 1} = 2 \div 3[/tex]

[tex] log_{b}(2 \div 3) = x + 1[/tex]

[tex]x = log_{b}(2 \div 3) - 1[/tex]