Identify the indicated protons in the following molecules as unrelated, homotopic, enantiotopic, or diastereotopic. a) Methyls a & b: _________ b) Ha & Hc: _________

Answer:

Which type of chemistry studies the chemical reactions that occur in the human body? .

biochemistry

The correct answer is biochemistry.

Learn more about Biochemistry here

https://brainly.com/question/13128204

#SPJ2

Answer:

Explanation:

This is because, Blue color highest frequency of energy after Violet and Indigo.

Answer:

The binding energy per nucleon of U-235 is lesser than that Fe-56

Explanation:

The binding energy refers to the energy required to hold the nucleons together in the nucleus of an atom.

It also corresponds to the energy that must be supplied in order to disintegrate the nucleus of an atom.

The binding energy per nucleon of elements depends on the number of nucleons present in the nucleus of the atom of that element. It is defined as the binding energy of the nucleus divided by the number of nucleons.

U-235 contains more nucleons than Fe-56, the binding energy per nucleon of U-235 is less than that of Fe-56. This is further confirmed by the fact that the greater the number of protons in the nucleus, the greater the coulumbic repulsion in the nucleus and the lesser the nuclear force of attraction between nucleons.

Explanation:

this is a single Replacement Reaction, so Na and Cl will form a bond.

Answer:

D

Explanation:

8oz=1cup

Xoz=1/4cup

cross multiply

Xoz=8×1/4=2

2oz=1/4cup

1oz=2T

2oz=x

cross multiply

×=2×2=4T

The cup of butter, number of tablespoons and ounces of butter are all in direct proportion with one another. The interpretation of the information provided is:

(b). The information provided gives the conversion factor 8oz/1 cup.

Given that:

[tex]1\ recipe = \frac{1}{4}\ cup[/tex]

[tex]1\ oz = 2T[/tex]

[tex]8\ oz = 1\ cup[/tex]

Multiply both sides of [tex]1\ oz = 2T[/tex] by 8

[tex]8 \times 1oz = 8 \times 2T[/tex]

[tex]8 oz = 16T[/tex]

Substitute 8oz for 1 cup in: [tex]1\ recipe = \frac{1}{4}\ cup[/tex]

[tex]1\ recipe = \frac{1}{4} \times 8oz[/tex]

Substitute [tex]8 oz = 16T[/tex]

[tex]1\ recipe = \frac{1}{4} \times 16T[/tex]

[tex]1\ recipe = 4T[/tex]

The interpretations are as follows:

Hence, (b) is correct

Read more about direct proportions at:

https://brainly.com/question/1266676

Answer:

A new fictitious element was discovered.

It is a metal named jolmium, J, and it has three valence electrons.

If it combines with iodine it forms jolmium iodide. Answer the following questions.

a.Is this compound ionic or covalent

b. What is the formula of Jolmium iodide?

c. What is the charge on the metal J in this compound?

d. Explain how you know that is the charge?

Explanation:

It is given the element jolmium J is a metal with three valence electrons.

Since metals are highly electropositive, they lose electrons easily and form cations (Ions with a positive charge).

[tex]J^{3+}[/tex] ion will be formed.

b) The formula of jolmium iodide is shown below:

[tex]J^{+3} I^{-1}\\The formula becomes:\\JI_{3}[/tex]

a) The compound is ionic in nature.

Since the compound formed between a metal atom and a nonmetal atom will take place by transfer of electrons.

Hence, it is ionic in nature.

c) The charge on the metal J in this compound is +3.

d) Given J has three valence electrons.

That means it can lose three electrons to form a bond.

So, its valency is three.

Answer:

Hence,  

1) removed  

2) drained through the stopcock  

3) get eye level with  

4) slow the draining  

5) switch to a new flask

Explanation:

After mixing the solutions in a separatory funnel, the stopper should be removed and the liquid should be drained through the stopcock, and the layers allowed to separate. When you get close to the interface between the layers, get eye level with the funnel and turn over to slow the draining heat up until the first layer is collected. Switch to a new flask get eye level with it to collect the second layer.

Answer:

See explanation and images attached

Explanation:

The first image shows the structure of hydrogen peroxide. It does not exist as resonance structures. The structure and properties of the molecule can wholly be explained on the basis of a single Lewis structure.

However, the structure of the bicarbonate ion in sodium bicarbonate can not be completely described by a single Lewis structure. Hence, two resonance structures are shown for the bicarbonate ion. In each case, Na^+ is the counter ion.

Answer:

Explanation:

The pH of a solution can be found by using the formula

[tex]pH = - log [ { H_3O}^{+}][/tex]

From the question we have

[tex]ph = - log(7.8 \times {10}^{ - 13} ) \\ = 12.1079...[/tex]

We have the final answer as

Hope this helps you

The pH of this solution with a 7.8 × 10⁻¹³ M concentration of hydronium ion is equal to: D. 12.

Given the following data:

Concentration of hydronium ion = 7.8 × 10⁻¹³ M.

pH is literally the power of hydrogen ions and it can be defined as a measure of the molar concentration of hydrogen ions in a given solution.

We would determine the pH of this solution by using this formula;

pH = -log[H⁺]

pH = -log(7.8 × 10⁻¹³).

pH = -(-12.1)

pH = 12.1 ≈ 12.

Read more on pH here: brainly.com/question/24233266

#SJP2

Answer:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

Explanation:

The reaction of the problem occurs as follows:

H2S(g) + O2(g) → H2O(g) + SO2(g)

To balance the reaction we must balance oxygens:

H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

To balance the complete reaction:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

As the energy is evolved, 124kcal are as product in the reactio per mole of H2S. As the balanced reaction contains 2 moles of H2S, the heat evolved is:

124kcal*2 = 248kcal:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

And this is the balanced equation

Answer:

To determine the enthalpy and entropy of dissolving a compound, you need to measure the Ksp at multiple temperatures. Then, plot ln(Ksp) vs. 1/T. The slope of the plotted line relates to the enthalpy (ΔH) of dissolving and the intercept of the plotted line relates to the entropy (ΔS) of dissolving.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us use the thermodynamic definition of the Gibbs free energy and its relationship with Ksp as follows:

[tex]\Delta G=-RTln(Ksp)\\\\\Delta G=\Delta H-T\Delta S[/tex]

Thus, by combining them, we obtain:

[tex]-RTln(Ksp)=\Delta H-T\Delta S\\\\ln(Ksp)=-\frac{\Delta H}{RT} +\frac{T\Delta S}{RT} \\\\ln(Ksp)=-\frac{\Delta H}{RT} +\frac{\Delta S}{R}[/tex]

Which is related to the general line equation:

[tex]y=mx+b[/tex]

Whereas:

[tex]y=ln(Ksp)\\\\m=-\frac{\Delta H}{R} \\\\x=\frac{1}{T} \\\\b=\frac{\Delta S}{R}[/tex]

It means that we answer to the blanks as follows:

To determine the enthalpy and entropy of dissolving a compound, you need to measure the Ksp at multiple temperatures. Then, plot ln(Ksp) vs. 1/T. The slope of the plotted line relates to the enthalpy (ΔH) of dissolving and the intercept of the plotted line relates to the entropy (ΔS) of dissolving.

Regards!

Answer:

See explanation

Explanation:

TLC is a chromatographic method in which the solute is spotted on a plate and the plate is placed in an air tight chamber containing a solvent. The solvent is maintained below the level of the spot. The capillary movement of the solvent through the plate achieves the required separation.

If two spots have Rf values of 0.25 and 0.26 respectively and then the plate was removed from the developing chamber, subsequently, the residual solvent was allowed to evaporate from the plate, and then the plate was returned to the developing chamber.

It will be observed after the second development is complete that the new Rf values will be 0.50 and 0.52 respectively. It will just be as though the second chromatogram picked up from where the first chromatogram stopped.

Answer:

50 CI₂ molecules

Explanation:

By looking at the stoichiometric coefficients, we can tell that if 2 atoms of potassium (K) react with chlorine gas (CI₂), 1 chlorine molecule would react.

With that in mind we can calculate how many CI₂ molecules would react with 100 K atoms:

Answer:

[tex]{ \tt{22.4 \: dm {}^{3} \: contains \: 1 \: mole \: of \: hydrogen }} \\ { \tt{0.15 \: {dm}^{3} \: will \: contain \: ( \frac{0.15}{22.4} \times 1) \: moles }} \\ = 0.0067 \: moles \\ { \bf{mole \: ratio = 1 :1 }} \\ { \tt{1 \: mole \: weighs \: 65.38 \: g}} \\ { \tt{0.0067 \: moles \: weighs \: (0.0067 \times 65.38) \: g}} \\ = 0.44 \: g[/tex]

Explanation:

[tex]2H_2O_2 \rightarrow 2H_2O + O_2[/tex]

First convert the amount of water into moles:

360 g H2O × [tex]\left(\dfrac{1\:\text{mol}H_2O}{18.015\:\text{g}H_2O}\right)[/tex]

[tex] = 20. \:\text{mol}H_2O[/tex]

Now let's calculate the number of moles of O2 gas produced.

20 mol H2O × [tex]\left(\dfrac{1\:\text{mol}O_2}{2\:\text{mol}H_2O}\right)=10\:\text{mol}O_2[/tex]

The volume of gas at 10°C and 5 atm can be found using the ideal gas law:

[tex]PV=nRT[/tex]

[tex]V= \dfrac{nRT}{P}[/tex]

[tex]= \dfrac{(10)(0.082)(283)}{(5)}=46.4\:L[/tex]

Answer:

1x10^-6

Explanation:

Answer:

.This is because gravity pulls down harder on the heavier one, which increases its friction with the floor

Mark me as Branliest

Answer:

His results will be skewed because there was more water than stock solution. Which would cause the percentage solution to be less than 50% therefore the density would be less than the actual value.

Explanation:

The solution will have percentage less than that of 50%. Therefore the density would be less than the actual value.

Suppose there should be 50 mL of the solution, and he added 60 mL. So 10 mL of the solution is added more.

Suppose the mass of the solute is m.

Originally, the density is = [tex]$\frac{m}{50}$[/tex]     [tex]\left(\frac{\text{mass}}{\text{volume}}\right)[/tex]

Now after adding extra 10 mL , the density becomes [tex]$\frac{m}{60}$[/tex].

Therefore, [tex]$\frac{m}{50}>\frac{m}{60}$[/tex]

So the density decreases when we add more solution.

Answer:

Octet rule fails to explain the following:

(1) The stability of incomplete octet molecules, i.e., the molecules with the central atom containing less than eight electrons. (2) The stability of expanded octet molecules, i.e., the molecules with the central atom containing more than eight electrons.

Answer:

b . uranium, It is not a renewable resource.

Answer: The final temperature will be [tex]52.74^oC[/tex]

Explanation:

Calculating the heat released or absorbed for the process:

[tex]q=m\times C\times (T_2-T_1)[/tex]

In a system, the total amount of heat released is equal to the total amount of heat absorbed.

[tex]q_1=-q_2[/tex]

OR

[tex]m_1\times C\times (T_f-T_1)=-m_2\times C\times (T_f-T_2)[/tex] ......(1)

where,

C = heat capacity of water = [tex]4.184J/g^oC[/tex]

[tex]m_1[/tex] = mass of water of sample 1 = 100.0 g

[tex]m_2[/tex] = mass of water of sample 2 = 71.0 g

[tex]T_f[/tex] = final temperature of the system = ?

[tex]T_1[/tex] = initial temperature of water of sample 1 = [tex]27^oC[/tex]

[tex]T_2[/tex] = initial temperature of the water of sample 2 = [tex]89.0^oC[/tex]

Putting values in equation 1, we get:

[tex]100.0\times 4.184\times (T_f-27)=-71.0\times 4.184\times (T_f-89)\\\\171T_f=9019\\\\T_f=\frac{9019}{171}=52.74^oC[/tex]

Hence, the final temperature will be [tex]52.74^oC[/tex]

Answer:

Its D Are in random motion

i hope it will help you if not soo sorry :)

Answer:

%C = 60.9%; %H = 15.4%; %N = 23.7%

Explanation:

Step 1: Given data

Step 2: Calculate the percent composition of this compound

To calculate the percent by mass of any element (E), we will use the following expression.

%E = mE/m × 100%

%C = 7.34 g/12.04 g × 100% = 60.9%

%H = 1.85 g/12.04 g × 100% = 15.4%

%N = 2.85 g/12.04 g × 100% = 23.7%

Answer:

The answer is consumers

Answer:

Consumers are the group of organisms that has the least biomass and energy.

Answer:

tge answer is a

Explanation:

I'm smart like that

Answer:

100 mL

Explanation:

The reaction that takes place is:

First we convert 500 mg of CaCO₃ into mmoles, using its molar mass:

Then we convert 5 mmoles of CaCO₃ into HCl mmoles, using the stoichiometric coefficients of the balanced reaction:

Finally we calculate the volume of a 0.10 M HCl solution (such as stomach acid) that would contain 10 mmoles:

Answer:

-0.08 °C

Explanation:

We can solve this problem by using Charles' law, which states that at constant pressure:

Where in this case:

We input the data:

And solve for T₂:

Finally we convert 273.08 K to Celsius:

Answer:

-219

Explanation:

1.5(339) - 1.5(485) = -219

The approximate enthalpy change for this substitution reaction is -219 kJ.

In the case of this substitution reaction, we need to find the enthalpy change when NaO₂C₂H₂Cl is converted to NaO₂C₂H₂F.

This reaction involves the breaking of the C-Cl bond and the formation of the C-F bond.

We have to subtract the bond energy of the C-F bond from that of the C-Cl bond and multiply by the number of moles involved.

So we will have;

ΔH= 1.500 mole [339.0  kJ/mol - 485.0 kJ/mol]

ΔH= -219 kJ

Learn more: https://brainly.com/question/1301642

1 NaCl + 1 HCl ➡️ 1 NaCl + Water (H2O) .

Answer:

carbohydrates are simple sugars which can be broken down to form 3 sugars.

which are , (maltose) (fructose) & (glucose)