Imagine using brainly LOL COULDNT BE ME XD

Answer:

a. 5 batteries b. 1050 mAh

Explanation:

Here is the complete question

A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation. NiMH rechargeable batteries in AA size are to be used. A) How many batteries are needed? B) What mAh capacity should the batteries have?

Solution

A) How many batteries are needed?

Since the nominal voltage for a single NiMH battery is 1.2 V per battery and we require 6V DC power, we combine the batteries in series to obtain a total voltage of 6 V. The number of batteries required, n = total voltage/voltage per cell = 6V/1.2V per battery = 5 batteries

So, the number of batteries needed is 5.

B) What mAh capacity should the batteries have?

Since the batteries are in series, they would each deliver a current of 150 mA. Since we require a current of 150 mA for 7 hours, the number of milliampere-hours capacity mAh of batteries required is Q = It where I = current = 150 mA and t = time = 7 hours.

So, Q = It = 150 mA × 7 h = 1050 mAh.

So, the batteries should have a mAh of 1050 mAh

Answer:

The velocity at that time would be [tex](-67.975\; \rm s)[/tex]. The velocity of this particle is continuously changing.

Explanation:

Differentiate the expression for position [tex]x[/tex] with respect to time [tex]t[/tex] to find an expression for velocity.

[tex]\begin{aligned}v(t) &= \frac{d}{dt}[x(t)] \\ &= \frac{d}{dt} \left[ 7.4 + 9.2\, t - 2.1\, t^{3}\right]\\ &= 9.2 - 6.3\, t^{2}\end{aligned}[/tex].

Hence, at [tex]t = 3.5\; \rm s[/tex], velocity would be [tex]v(3.5) = 9.2 - 6.3 \times (3.5)^{2} = -67.975\; \rm m[/tex].

Since velocity [tex]v(t)[/tex] changes with time [tex]t[/tex], the velocity of this particle is continuously changing.

Answer:

E_O = 96J

Explanation:

E_O = E_I*(%e/100%)

E_O = 120J*(80%/100%)

E_O = 96J

Answer:

Explanation:

Givens

t = 10 seconds

vi = 0

vf = 3600 mph

a = ?

d = 10000 feet

Formula

a = (vf - vi)/t

Solution

vf = 3600 mph * 1 hr / 3600 seconds * 5280 feet / 1 mile = 5280 ft / sec

a = (5280 - 0)/10

a = 528 ft/sec^2

Answer:

The acceleration due to gravity at Pluto is 0.0597 m/s^2.

Explanation:

Length, L = 1 m

10 oscillations in 257 seconds

Time period, T = 257/10 = 25.7 s

Let the acceleration due to gravity is g.

Use the formula of time period of simple pendulum

[tex]T = 2\pi\sqrt{\frac{L}{g}}\\\\25.7 = 2 \times 31.4\sqrt{\frac{1}{g}}\\\\g = 0.0597 m/s^2[/tex]

Answer:

could and largejsjisj and we look like they can get to

Answer:

Explanation:

        16093.4

Answer:

I dont know answer Sorry For that thank u

Our sun is 27 million times larger than our moon. Based on its mass, the sun's gravitational attraction to the Earth is more than 177 times greater than that of the moon to the Earth. If tidal forces were based solely on comparative masses, the sun should have a tide-generating force that is 27 million times greater than that of the moon. However, the sun is 390 times further from the Earth than is the moon. Thus, its tide-generating force is reduced by 3903, or about 59 million times less than the moon. Because of these conditions, the sun’s tide-generating force is about half that of the moon.

Answer:

38500

Explanation:

I looked it up so it may be wrong

Answer:

I THINK IT'S D....

HOPE SO

Answer:

if buoyant force is equal is equal to the weight of body then our body float. if density of our body is less than density of liqiud then our body float in water.

Answer:

ccccccccc or bbbbbbb or aaaaaaaa or ddddddd

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

Momentum is a quantity that we can say is typically conserved in collisions.

Momentum is the quantity that that we see typically conserve in the collision,therefore the correct answer is the option A

It is the type of collision in which the total momentum  as well as the kinetic energy on the system is conserved .The momentum before the collision is equal to the momentum after the collision in other words one can say in the elastic collision momentum of the quantity is conserved.

In the inelastic collision the momentum is conserved but the kinetic energy of the quantity is not conserved.

Momentum of a quantity is conserved irrespective of the type of collision  whether it will be elastic collision or inelastic collision the momentum of the quantity will always be conserved.

Hence,we can say that momentum is the quantity that is conserved in collision,The correct answer for the given problem is option A.

Learn more about the collision and from here

https://brainly.com/question/2356330

#SPJ2

Answer:

D

Explanation:

i just did it trust me

[tex]\\ \sf\longmapsto 300-70.5=229.5kJ[/tex]

We know

[tex]\boxed{\sf Efficiency=\dfrac{Used\:Energy}{Supplied\:Energy}\times 100}[/tex]

[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{300}\times 100[/tex]

[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{3}[/tex]

[tex]\\ \sf\longmapsto Efficiency=76.5\%[/tex]

Answer:

Yes, this is true.

-- While the apple is falling, the same gravitational force acts on both the apple and the Earth.

-- The mass of the apple is somewhere in the neighborhood of 1/4 kg.

-- The mass of the Earth is about 5.972 x 10²⁴ kg.

-- Since the Earth has roughly 2.389 x 10²⁶ times as much mass as the apple has, the apple has roughly 2.389 x 10²⁶ greater acceleration than the Earth has, and moves roughly 2.389 x 10²⁶ times as far down as the Earth moves up, before they smack together.

-- That's why you don't notice the Earth's motion.

-- Also, you're standing on the Earth, moving up with it, toward the apple.  Maybe it would be different if you were sitting on the apple, riding it down to the ground, and you were able to notice the motion of the ground coming up to meet you at a speed that's 0.00000000000000000000000000419 of YOUR speed.  

Answer From Gauth Math

Answer:

Current- the flow of free charges, such as electrons and ions

Drift velocity- the average speed at which these charges move

Answer:

An electric current is the stream of changed particals, such as electrons & ions, moving through an electrical conductor.

The average velocity attained bycharged partical ,such as electrons,in a material due to electric fields

Answer:

Explanation:

We are basically needing to solve for the time in the equation d = rt, where d is the distance around Mars (aka the circumference), r is the velocity, and t is time. We need to find the circumference and the velocity. We will begin with the velocity.

Because the gravitational attraction between Phobos and Mars provides the centripetal acceleration necessary to keep Phobos in its (sort of) circular path, the equation we use for this is:

[tex]F_g=F_c[/tex] which says that Force supplied by gravity is equal to the centripetal force. Expanding that:

[tex]\frac{Gm_{Phobos}m_{Mars}}{r^2}=\frac{m_{Phobos}v^2}{r}[/tex]

When we move that around mathematically to solve for the velocity value, what we end up with is:

[tex]v=\sqrt{\frac{Gm_{Mars}}{r}[/tex] and filling in:

[tex]v=\sqrt{\frac{(6.67*10^{-11})(6.42*10^{23})}{9.38*10^6} }[/tex] and we get that

v = 2100 m/s

Now for the circumference:

C = 2πr and

C = 2(3.1415)(9.38 × 10⁶) so

C = 5.9 × 10⁷

Putting that all together in the C = vT equation:

5.9 × 10⁷ = 2100T so

T = 2.8 × 10⁴ sec or 7.8 hours

Answer:

250 Pa or N/m^2

Explanation:

Pressure(P)=F/A=500/2=250 Pa or N/m^2

When,a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west,then the velocity of the man according to a stationary observer would be 0.2 m/s west,Therefore, the correct answer would be option B.

The total displacement covered by any object per unit of time is known as velocity. The velocity of an object is depend on the magnitude as well as the direction of the object.

the mathematical expression for velocity is given by

velocity = total displacement /time

The speed and velocity of the object are very different from each other because speed does not depend upon the direction of the moving  object but velocity depends on the magnitude of speed as well as the direction of the moving object.

As per given in the problem a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west therefore from the perspective  of a stationary observer the velocity of man would be 0.2 m/s towards West.

Hence the correct options for the problem would be option B.

Learn more about Velocity from here

brainly.com/question/18084516

#SPJ2

Explanation:

tilting it will raise the height of its center of gravity.

Answer:

distance between should be 1.25 × 10^6 m

Explanation:

Force is proportional to separation distance.

[tex]250 \: newtons = 2.5 \times {10}^{6} \: metres \\ ( \frac{1}{2} \times 250) \: newtons = d \\ \\ d = \frac{125 \times 2.5 \times {10}^{6} }{250} \\ d = 1.25 \times {10}^{6} \: metres[/tex]

Answer:

distance between should be 1.25×10^6.

Explanation:

force Is proportional to separation .

mrk above answer branilest .

Answer:

simple machine, any of several devices with few or no moving parts that are used to modify motion and the magnitude of a force in order to perform work. ... The simple machines are the inclined plane, lever, wedge, wheel and axle, pulley, and screw.

The answer to the digits rounded to one significant figure is 100.

Significant figures are the most important figures in a number of digits.

The closer a digit is to the beginning of a number, the more important  or significant  it is.

But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:

From the numbers 98.907, 9 is the most significant digit followed by 8.

8 is greater than 5 so we should round up by adding one to 9 making the number 100.

learn more here:

https://brainly.com/question/11566364

Answer:

Joule

Explanation:

the unit of work is Joule determined by the letter J.

Answer:

Explanation:

Joule is defined as the work done by a force of one newton causing a displacement of one meter. Sometimes, newton-metre (N-m) is also used for measuring work.