In scientific notation, the number 0.00262 is expressed as

Answers

Answer 1

Answer:

2.62*10^-3

Explanation:

To do this by hand, you need to understand the rules of scientific notation.

Answer 2

Answer:

0.00262 in scientific notation is 2.62 x 10^-3


Related Questions

How many grams are in 3.0 moles of sodium chloride (NaCl)?

Answers

Answer:

175.5

Explanation:

how many ions does magnesium phosphite have? how many of those are anions? please explain thought process.

Answers

Answer:

We can simply refer to the cation in the ionic compound as magnesium. Phosphorus, Pstart text, P, end text, is a group 15 element and therefore forms 3- anions.

Explanation:

Because it is an anion, we add the suffix -ide to its name to get phosphide as the name of the ion.

Why do scientists think that liquid water might have once existed on Mars?

Answers

Answer: The discovery of three buried lakes. Scientists think that a long time ago there were lakes and rivers, etc on Mars. Now of course, you can't see any visible water sources on the surface.

Answer:

Almost all water on Mars today exists as ice, though it also exists in small quantities as vapor in the atmosphere.[5] What was thought to be low-volume liquid brines in shallow Martian soil, also called recurrent slope lineae may be grains of flowing sand and dust slipping downhill to make dark streaks.The only place where water ice is visible at the surface is at the north polar ice cap. Abundant water ice is also present beneath the permanent carbon dioxide ice cap at the Martian south pole and in the shallow subsurface at more temperate conditions. More than 5 million km3 of ice have been detected at or near the surface of Mars, enough to cover the whole planet to a depth of 35 meters. Even more ice is likely to be locked away in the deep subsurface.

Some liquid water may occur transiently on the Martian surface today, but limited to traces of dissolved moisture from the atmosphere and thin films, which are challenging environments for known life. No large standing bodies of liquid water exist on the planet's surface, because the atmospheric pressure there averages just 600 pascals , a figure slightly below the vapor pressure of water at its melting point; under average Martian conditions, pure water on the Martian surface would freeze or, if heated to above the melting point, would sublime to vapor. Before about 3.8 billion years ago, Mars may have had a denser atmosphere and higher surface temperatures, allowing vast amounts of liquid water on the surface, possibly including a large ocean that may have covered one-third of the planet.Water has also apparently flowed across the surface for short periods at various intervals more recently in Mars' history. Aeolis Palus in Gale Crater, explored by the Curiosity rover, is the geological remains of an ancient freshwater lake that could have been a hospitable environment for microbial life.Many lines of evidence indicate that water ice is abundant on Mars and it has played a significant role in the planet's geologic history.The present-day inventory of water on Mars can be estimated from spacecraft images, remote sensing techniques (spectroscopic measurements, radar, etc.), and surface investigations from landers and rovers.Geologic evidence of past water includes enormous outflow channels carved by floods, ancient river valley networks, deltas and lakebeds,and the detection of rocks and minerals on the surface that could only have formed in liquid water. Numerous geomorphic features suggest the presence of ground ice (permafrost)and the movement of ice in glaciers, both in the recent past and present. Gullies and slope lineae along cliffs and crater walls suggest that flowing water continues to shape the surface of Mars, although to a far lesser degree than in the ancient past.Although the surface of Mars was periodically wet and could have been hospitable to microbial life billions of years ago, the current environment at the surface is dry and subfreezing, probably presenting an insurmountable obstacle for living organisms. In addition, Mars lacks a thick atmosphere, ozone layer, and magnetic field, allowing solar and cosmic radiation to strike the surface unimpeded. The damaging effects of ionizing radiation on cellular structure is another one of the prime limiting factors on the survival of life on the surface. Therefore, the best potential locations for discovering life on Mars may be in subsurface environments. Large amounts of underground ice have been found on Mars; the volume of water detected is equivalent to the volume of water in Lake Superior. In 2018, scientists reported the discovery of a subglacial lake on Mars, 1.5 km (0.93 mi) below the southern polar ice cap, with a horizontal extent of about 20 km (12 mi), the first known stable body of liquid water on the planet.Understanding the extent and situation of water on Mars is vital to assess the planet’s potential for harboring life and for providing usable resources for future human exploration. For this reason, "Follow the Water" was the science theme of NASA's Mars Exploration Program (MEP) in the first decade of the 21st century. NASA and ESA missions including 2001 Mars Odyssey, Mars Express, Mars Exploration Rovers (MERs), Mars Reconnaissance Orbiter (MRO), and Mars Phoenix lander have provided information about water's abundance and distribution on Mars.Mars Odyssey, Mars Express, MRO, and Mars Science Lander Curiosity rover are still operating, and discoveries continue to be made.

calculate the value of (Ag+) in a saturated solution of AgCl in distilled water

Answers

Answer:

[tex][Ag^+]=1.3x10^{-5}M[/tex]

Explanation:

Hello there!

In this case, according to the dissociation of silver chloride in aqueous solution, we can write:

[tex]AgCl(s)\rightarrow Ag^+(aq)+Cl^-(aq)[/tex]

Whereas the equilibrium expression is:

[tex]Ksp=[Ag^+][Cl^-][/tex]

And the solubility product constant is  1.7 x10⁻¹⁰; thus, by inserting x as the concentration of both silver and chloride ions as they are the same at equilibrium, we obtain:

[tex]1.7x10^{-10}=x^2\\\\x=\sqrt{1.7x10^{-10}} \\x=1.3x10^{-5}M[/tex]

Which is also equal to the concentration silver ions at equilibrium in a saturated solution because we considered the Ksp.

[tex][Ag^+]=1.3x10^{-5}M[/tex]

Best regards!

when 70.0 grams of mno2 reacted with 128.0 grams of hcl, the reaction resulted in a 62.7% yield of chlorine gas. what is the actual yield of chlorine gas in grams? Mno2 + HCI —> MnCl2 + h2o + cl2​

Answers

Answer:

35.8g of Cl₂ is the yield

Explanation:

Based on the reaction:

MnO₂ + 4HCl → MnCl₂ + 2H₂O + Cl₂

1 mole of MnO₂ and 4 moles of HCl react producing 1 mole of Cl₂

To solve this question we must find limiting reactant. with limiting reactant we can find the theoretical yield of Cl₂. As the actual yield is the 62.7% we can find actual yield of Cl₂ in grams:

Moles MnO₂ -Molar mass: 86.9368g/mol-:

70.0g * (1mol / 86.9368g) = 0.805 moles

Moles HCl -Molar mass: 36.46g/mol-:

128.0g * (1mol / 36.46g) = 3.51 moles

For a complete reaction of 3.51 moles of HCl are required:

3.51 moles HCl * (1mol MnO₂ / 4mol HCl) = 0.878 moles MnO₂.

As there are just 0.805 moles of MnO₂, MnO₂ is limiting reactant.

1 mole of MnO₂ produce 1 mole of Cl₂. The theoretical moles of Cl₂ produced are 0.805 moles.

As the yield is of 62.7%, the yield of Cl₂ is:

0.805 moles * (62.7 / 100) = 0.505 moles Cl₂. In grams:

0.505 moles Cl₂ * (70.906g / mol) =

35.8g of Cl₂ is the yield

why do we need digital technology in school?​

Answers

Answer: See explanation

Explanation:

Digital technologies refers to the electronic tools, or devices that can be used to generate data, store them or process data. e.g. mobile phones, ebooks etc.

Digital learning makes use of technology. Effective use of digital learning tools can help increase the engagement of students. This csn.aksi be used by the teachers to enhance personalized learning and also improve the lesson plans.

Digital technology can enhance collaboration, and communication with the students. The use of videos, robots, virtual classrooms, augmented reality and other technologies can bring about fun and foster inquisitiveness.

1. If I have 5 moles of a gas at a pressure of 7.6 atm and a volume of 12 liters, what is the temperature?

Answers

Answer:

221.22K or -51°C

Explanation:

We will be using the Ideal Gas Law to calculate the temperature of the gas. It is a mathematical relationship that describes the behavior of ideal gas ample for any combo of varying pressure, volume, temperature, and # of moles (n). It is derived by combing Boyle's Law, Charles' Law, Gay-Lussac's & Avogadro's Law.

Note: As always, remember that temperature must be in Kelvin not Celsius when using this equation.

Ideal Gas Law: [tex]PV = nRT[/tex], where P = pressure, V = volume (in Liters), n = # of moles, R = the ideal gas constant, and T = temperature (in Kelvin).

Based on the problem, we are given the pressure, volume, and # of moles. We are asked to find the temperature. What about R you ask? Well, R is a constant that is the value of 1 mole of gas at STP. R has various values depending on the pressure units. In this case, our pressure is in atm so the R value = 0.0821.

Onto the math - all that needs to be done now is to plug and chug. Plug in the given values to find the temperature:

Set up: [tex](7.6 atm)(12L) = (5 mol)(0.0821 L*atm/(mol*K))(T)[/tex]

==> [tex]T = \frac{(7.6 atm)(12L)}{(5 mol)(0.0821 L*atm/(mol*K))}[/tex]

==> T = 221.17K

The answer is 221.17K. To convert into Celsius, subtract by 273.15 to get -50.99 or -51°C.

A truck accelerates at a rate of 14 m/s2 . The truck weighs 17000 kg. What is the amount of force
necessary for the truck to accelerate at this rate?

Answers

Answer:

238000 N

Explanation:

Use F=ma

Mass= 17000 kg

Accel.= 14 m/s²

Atoms in the same GROUP have the same...

A . Size
B. Temperature
C. Number of energy levels
D. Reactivity

Answers

Answer:

reactivity

Explanation:

for example atoms in group 7 react by gaining 1 electron to become stable but they do not have the same number of energy levels

What is the volume of 0.200 moles of O2 gas at STP?

Answers

Answer:

4.48 L O2

Explanation:

At STP, a mole of any gas contains 22.4 liters. Therefore, we simply have to multiply the amount of moles by 22.4

0.2mol O2 ( 22.4 L) = 4.48 L O2

.50 ml of a solution are diluted to a volume of 100 ml. The concentration of the diluted
solution is 2 M. What was the concentration of the original solution?


pls answer asap! will mark as brainly ist!!

Answers

Answer:

4 M

Explanation:

To answer this problem we can use the following formula:

V₁C₁ = V₂C₂

Where the subscript 1 refers to the volume and concentration before diluting, and 2 refers to volume and concentration after diluting.

Meaning that in this case we can write:

50 mL * C₁ = 100 mL * 2 M

We can now solve for C₁:

C₁ = 4 M

Which of the following is an example of synthesis?


A) HgO + Cl2-->HgCl + O2

B) Na + Br2 --> NaBr

C) KClO3 --> KCl + O2

D) Cl2 + NaBr --> NaCl + Br2

Answers

Answer:

B

Explanation:

The spinning of Earth on its axis is an example of its ________.

Answers

Answer:

rotation

Explanation:

Answer:

Rotation

Explanation:

Earth rotates on it's axis to give us the day and night cycle

What are the benefits of Fluoride?

Answers

Answer:

The benefits of Fluoride are rebuild (remineralize) weakened tooth enamel.slow down the loss of minerals from tooth enamel.reverse early signs of tooth decay.prevent the growth of harmful oral bacteria

Answer:

Fluoride is often called nature's cavity fighter and for good reason. Fluoride, a naturally-occurring mineral, helps prevent cavities in children and adults by making the outer surface of your teeth (enamel) more resistant to the acid attacks that cause tooth decay.

What type of Weathering is important to sand storms on Mars? Physical or
Chemical?

Why would 3D printing be important on Mars and why would you use material from the surface of Mars.

We could "print" things that we need on Mars.
We could print things that we need on Mars and use material that is already on the planet
It would be so cool
The cost would be less expensive.

Answers

Answer:

1. Physical Weathering

2. Option B

Explanation:

1. Physical weathering

On Mars, there are two types of weathering agents a) wind and b) acid fog. Thus, they will carry out only physical weathering

2. Option B

3D can be used to produce things that are required on the Mars and also the locally available raw material can be used for printing thereby saving the cost.

What process is represented by this redox equation?
C6H12O6 + 602 -> 6H20 + 6CO2

A. Rusting
B. Photosynthesis
C. Cellular respiration
D. Combustion

Answers

The redox equation C6H12O6 + 6O2 -> 6H2O + 6CO2 represents the process of cellular respiration. Option C

Cellular respiration is a biochemical process that occurs in living organisms, including plants and animals, to convert organic compounds, such as glucose (C6H12O6), into usable energy in the form of adenosine triphosphate (ATP). It is the primary process by which cells derive energy to carry out their functions.

In the given equation, glucose (C6H12O6) is being oxidized, losing electrons, and releasing carbon dioxide (CO2) as a byproduct. This oxidation process results in the production of energy-rich molecules, such as ATP.

Additionally, oxygen (O2) is being reduced, accepting the electrons from glucose and combining with hydrogen (H) to form water (H2O). This reduction process allows for the transfer of electrons and the generation of energy.

The process of cellular respiration is essential for the survival and functioning of organisms, as it provides the necessary energy for various metabolic activities, growth, and maintenance of cellular processes.

It is a fundamental metabolic pathway found in both plants and animals, enabling them to extract energy from organic molecules through the oxidation of glucose or other fuel sources.

Therefore, option C, cellular respiration, is the correct answer that represents the process described by the given redox equation.

For more such questions on redox equation visit:

https://brainly.com/question/21851295

#SPJ8

which of the following, when dissolved in water, forms a weak acid.A. HNO3B. HClO4C. HBrD. HClOE. NH3

Answers

Answer:

The weak acid is - E. [tex]NH_3[/tex]

Explanation:

Ammonia is a strong base, which in turn make it to be a weak acid.

As, the rest of the options are acid and therefore furnish hydrogen ions when dissolved in water, making them strong acid.

And ammonia dissolves in water to form its conjugate ammonium ion and hydroxide ion, therefore making the solution basic.

Hence, from the given options, the correct option is E. [tex]NH_3[/tex]

The compound which when dissolved in water, forms a weak acid is; Choice E: NH3

According to the question;

we are required to determine which compound forms a weak acid when dissolved in water.

Unlike other compounds (HNO3, HClO, HBr, HClO) which dissolve in water to yield H+ ion, Ammonia dissolves in water to form ammonium ion and hydroxide ion, OH-.

In essence, NH3 is a strong base when dissolved in water and consequently, is a weak acid when dissolved in water.

Read more:

https://brainly.com/question/15192126

What kind of waste is shown in the photograph?
A. Composted waste
B. E-waste
C. Hazardous waste
O D. Septic system waste

Answers

it should be C. hazardous waste
hope this helps!!

which method is adopted in the seperation of lead chloride from water​

Answers

Explanation:

by dissolving the mixture of lead sulphate and lead chloride in water we can separate the two. after dissolving the mixture on water lead sulphate can be obtained as the solid that 's left behind lead chloride can be recovered by evaporating.

How many moles of magnesium nitrate are produced when he reacts 0.34 moles of nitric acid with excess magnesium?

Answers

Jeirurbekwiufbekwididjdeu

Which fossil fuel was formed from the bodies of prehistoric animals and plants?

Answers

Answer:

coal

Explanation:

Aqueous solutions containing approximately 3 percent(w/w) H2O2 are sold in drug stores as a disinfectant. Determination of the actual concentration of H2O2 in a bottle of peroxide solution was done by diluting 1.50 mL to 100 mL with water, acidifying with dilute H2SO4 and titrating with a 0.01411 M KMnO4 solution. 32.17 mL of the permangate solution was needed to reach the end point of the titration. What is the actual molar concentration of the H2O2 solution]

Answers

Answer:

0.01804 M KMnO4 Solution.

Explanation:

3 Percent(w/w) H2O2 Are Sold In Drug Stores As A Disinfectant. ... H2O2 In A Bottle Of Peroxide Solution Was Done By Diluting 1.50 ML To 100 ML With Water, Acidifying With Dilute H2SO4 And Titrating With A 0.01804 M KMnO4 Solution.

You are given three liquids, pentane (C5H12), water (H2O), and tetrachloromethane (CCl4), and are told to make solutions.

a. Predict whether you will be able to make a solution with pentane and tetrachloromethane
b. Predict whether you will be able to make a solution with pentane and water, and give your reasoning.

Answers

Answer:

A. predict whether you will be able to make a solution with pentane and tetrachloromethane

Explanation:

Sana nakatulong

Consider the following intermediate chemical equations.
P₄(s)+3O₂(g) ---> P₄O₆(s) ΔH₁ = -1640kJ
P₄O₁₀(s) ---> P₄(s)+5O₂(g) ΔH₂ = 2,940.1 kJ

What is the enthalpy of the overall chemical reaction P₄O₆(s)+2O₂(g) ---> P₄O₁₀(s)
A.) -4,580 kJ
B.) -1,300 kJ
C.) 1,300 kJ
D.) 4,580 kJ

Answers

Answer:

-1,300 kJ

I don't want to explain it brainly AAAAA

The standard enthalpy of the reaction is the enthalpy change which occurs in a system when a matter is transformed by a chemical reaction under standard conditions. Here the enthalpy of the overall chemical reaction is  -1,300 kJ. The correct option is B.

What is enthalpy change?

In any general chemical reaction, the reactants undergo chemical changes to form products. The change in enthalpy is represented as ΔrH and is termed as the reaction enthalpy. It can be calculated by subtracting the sum of enthalpies of all the reactants from that of the products.

ΔrH  = ∑ aiH products - ∑ bi H reactants

Here we should reverse the first reaction and also multiply its ΔH by (- 1):

P₄O₆(s) → P₄(s) + 3O₂(g), ΔH₁' = 1640.1 kJ.

The second reaction is also reversed and also multiply its ΔH by (- 1):

P₄(s) + 5O₂(g) → P₄O₁₀(s), ΔH₂' = - 2940.1 kJ.

If we add the two reactions after modification, we get:

P₄O₆(s) → P₄O₁₀(s).

Therefore,  ΔH = ΔH₁' + ΔH₂' = 1640.1 kJ + (- 2940.1 kJ) = - 1300 kJ.

Thus the correct option is B.

To know more about enthalpy of a reaction, visit;

https://brainly.com/question/1657608

#SPJ7

1. What organ system is responsible for controlling all of the body
functions?

Answers

Answer:

The human brain is the body's control center, receiving and sending signals to other organs through the nervous system and through secreted hormones. It is responsible for our thoughts, feelings, memory storage and general perception of the world. The human heart is a responsible for pumping blood throughout our body

A moving 10 kilogram object has 20 Joules of kinetic energy. What is its velocity?
4 m/s
2 m/s
10 m/s
200 m/s

Answers

It’s the second one you’re welcome

Which one is it for a brialiest

Answers

I’m confused about the question

Only 5 minutes to answer!
Why are the weather satellites important on Mars?

Answers

Answer:

they can track the weather which can show if it would be posssible to live or have life on mars

Explanation:

What is the ratio by atoms of elements present in technetium (VII) peroxide? (peroxide
is a polyatomic ion)
1:7
2:8
4:9
3:1

Answers

Answer: 1:7

Explanation: 2 Tc^+7 + 7 O2^-2 -> Tc2 (O2)7

Also 2 Tc to 14 O

Which element had the smallest atomic radius

Answers

Answer:

helium is the answer

Explanation:

helium is the smallest element in francium is the largest hope this helps

Other Questions
What type of Weathering is important to sand storms on Mars? Physical orChemical?Why would 3D printing be important on Mars and why would you use material from the surface of Mars.We could "print" things that we need on Mars.We could print things that we need on Mars and use material that is already on the planetIt would be so coolThe cost would be less expensive. The spinning of Earth on its axis is an example of its ________. Who was Laozi?(Like a description) HELP PLEASE (MC)I MET a traveller from an antique landWho said: Two vast and trunkless legs of stoneStand in the desert ... Near them, on the sand.Half sunk, a shattered visage [face] lies, whose frown,And wrinkled lip, and sneer of cold command.Tell that its sculptor well those passions readWhich still survive, stamped on these lifeless things,The hand that mocked them, and the heart that fed;And on the pedestal these words appear:"My name is Ozymandias, king of kings:Look on my works, ye Mighty, and despair!"Nothing beside remains. Round the decayOf that colossal wreck, boundless and bareThe lone and level sands stretch far away.Select one piece of evidence that supports the situational irony of the poem.(10 points) someone help me please like right now lol of and dont put any links pls! You are going to visit a national park, and have never been there before. You are using a map to try and make the distance travelled as short as possible. There are 5 intermediate towns, A, B, C, D, and E, you may gln your way to the park, and the distances between the various locations are given below. fill in blank with correct verb_________ mexicano.eresestas The base angles of anisosceles triangleMeasure (2x+40) and(5x+16)". find x and theMeasure of both angles. Which statement explains one way that coping strategies are helpful?They help people make more friends.They allow people to avoid experiencing sadness.They allow people to address suicidal thoughts.They help people get better grades at school. PLSSS HELP!!!! in need of help immediately! (check whole picture) and pls dont leave a link. If you could spend the perfect day, what would you do? Where would you be? Who would be with you? What do you see? Eat? Play? Use your senses to describe it? What do you see? Hear? Smell? Taste? Touch? a is (4,15) and b is (8,1) what is the midpoint of AB? River C is 400 miles longer than River D. If the sum of their lengths is 5560 miles, what is the length of each river? Good art is art that allows you to enter it from a variety of angles and to emerge with a variety of views."" what is you insights about this quotes? The length of a rectangle is five more than three time its width. The perimeter of a rectangle is 234. What is the width of the rectangle write a letter to your friend telling her aboutyour plan ofterBLE Well just go to my profile ig and then theres my question but this is the pic to it (08.03)Heather recorded the different types of music her friends like in the table below:Type of Music Number of FriendsCountry3Hip-hop2Pop4Rock1Which of the following plots represents the data in the table?A: A dot plot line labeled Types of Music and titled Music. Four tick marks labeled Country, Hip-hop, Pop, and Rock. There are 3 dots above Country, 2 above Hip-hop, 4 above Pop, and 1 above Rock.B: A dot plot line labeled Types of Music and titled Music. Four tick marks labeled Country, Hip-hop, Pop, and Rock. There is 1 dot above Country, 2 above Hip-hop, 3 above Pop, and 4 above Rock.C: A dot plot line labeled Types of Music and titled Music. Four tick marks labeled Country, Hip-hop, Pop, and Rock. There are 3 dots above Country, 4 above Hip-hop, 1 above Pop, and 2 above Rock.D: A dot plot line labeled Types of Music and titled Music. Four tick marks labeled Country, Hip-hop, Pop, and Rock. There are 2 dots above Country, 4 above Hip-hop, 4 above Pop, and 3 above Rock In order to estimate the mean amount of time computer users spend on the internet each month, how many computer users must be surveyed in order to be 95% confident that your sample mean is within 11 minutes of the population mean? Assume that the standard deviation of the population of monthly time spent on the internet is 202 min. The minimum sample size required is_______computer users. (Round UP to the nearest whole number.) please answer asapi will mark brainliestSolve for x and find the missing angle measurement.