In the Biomedical and Physical Sciences building at MSU there are 135 steps from the ground floor to the sixth floor. Each step is 16.6 cm tall. It takes 5 minutes and 30 seconds for a person with a mass of 73.5 kg to walk all the way up. How much work did the person do?

Explanation:

Movement:refers to the changing in the lights whether it be a change in intensity, color or direction of origin.

Answer: θ would equal approximately 28.7°

This is a kinematics problem, where one is only given the theta value 13.0° in regards to the range; thus, the problem is testing one's understanding of the relationships between the variables.

Range (aka x) = (v₀ sin (2θ₀))/g, where θ₀ = 13.0°

Now if we multiply the range by 2, we get:

2x = 2((v₀ sin (2θ₀))/g) → to verbalize, if range equates to (v₀ sin (2θ₀))/g, and doubling the range equals twice the product value, then:

2θ = sin⁻¹(2sin(2(13.0° )) = sin⁻¹(2(0.76255845048)) = sin⁻¹ (1.52511690096) = 57.35560850015109°/2 = θ

Thus, θ = 28.67780425

It's been awhile since I did this; though I hope it helped!

Answer:

Shiny surface.

Explanation:

We know that radiation pressure is the pressure over a surface exposed to electromagnetic radiation.

Where if the radiation is absorbed by the material (like in the case of a dark surface), the pressure is the energy density flux divided by the speed of light, while if the radiation is totally reflected (idealized case, but we can suppose that this happens for a shiny surface) the pressure is twice pressure for the absorbed case.

This is a simplification for the radiation pressure but is enough to conclude that the radiation pressure is always greater on reflective surfaces, then for this case, the pressure will be greater on a shiny surface than in a dark surface,

Answer:

c

Explanation:

in food and batteries chemical energy is stored :) hope this helped

Answer:

The average speed is 1 m/s

The average velocity is 0

Explanation:

Given;

length of the pool, L = 50 m

time taken for the motion, t = 100 s

The total distance = 50 m + 50 m

The total distance = 100 m

The average speed = total distance / total time

                                  = 100 / 100

                                  = 1 m/s

The average velocity = change in displacement / change in time

change in displacement = 50 m - 50 m = 0

The average velocity = 0 / 100

The average velocity = 0

Answer:

I just noticd i dont speak this launguage

Explanation:

I can not even read this question.

What are you trying to even say?

The acceleration of the car with two (2) washers added is equal to 0.33 [tex]m/s^2[/tex].

Given the following data:

An acceleration can be defined as the rate of change of velocity of an object with respect to time and it is measured in meter per seconds square.

In Science, the average acceleration of an object is calculated by subtracting its initial velocity from the final velocity and dividing by the change in time for the given interval.

Mathematically, average acceleration is given by this formula:

[tex]a = \frac{V\;-\;U}{t_f-t_i}[/tex]

Where:  

Substituting the given parameters into the formula, we have;

[tex]a = \frac{0.36\;-\;0.13}{2.61\;-\;1.92}\\\\a=\frac{0.23}{0.69}[/tex]

a = 0.33 [tex]m/s^2[/tex]

Read more on acceleration here: brainly.com/question/24728358

Answer:

564

Explanation:

Answer:

To find out the number of atoms: MULTIPLY all the SUBSCRIPTS in the molecule by the COEFFICIENT. (This will give you the number of atoms of each element.)

Explanation:

From the water whole water cycle starts again.

Answer:

1 cal/s =4.184w

p=50 cal/s =2093w

v=12v

P = V*I

I =P/V

I = 17.43 A

P =1²*R

R = P/I²

The question is incomplete. The complete question is :

Assume that the energy lost was entirely due to friction and that the total length of the PVC pipe is 1 meter. Use this length to compute the average force of friction (for this calculation, you may neglect uncertainties).

Mass of the ball :  16.3 g

Predicted range :  0.3503 m

Actual range : 1.09 m

Solution :

Given that :

The predicted range is 0.3503 m

Time of the fall is :

[tex]$t=\sqrt{\frac{2H}{g}}$[/tex]

[tex]v_1t= 0.35[/tex]  ...........(i)

[tex]v_0t= 1.09[/tex]  ...........(ii)

Dividing the equation (ii) by (i)

[tex]$\frac{v_0t}{v_1t}=\frac{1.09}{035} = 3.11$[/tex]

∴ [tex]v_0=3.11 \ v_1[/tex]

Now loss of energy  = change in the kinetic energy

[tex]$W=\frac{1}{2} m [v_0^2-v_1^2]$[/tex]

[tex]$W=\frac{1}{2} \times (16.3 \times 10^{-3}) \times [v_0^2-\left(\frac{v_0}{3.11}\right)^2]$[/tex]

[tex]$W=7.307\times 10^{-3} \ v_0^2$[/tex]

If f is average friction force, then

(f)(L) = W

(f) (1) = [tex]$7.307\times 10^{-3} \ v_0^2$[/tex]

(f)  = [tex]$7.307\times 10^{-3} \ v_0^2$[/tex]

The Average force of friction is ( F )  = 7.307 * 10⁻³ v₀²

Given data:

Predicted range ( v₁t ) = 0.3503 m

Actual range ( v₀t ) = 1.09 m

mass = 16.3 g

First step : Determine the value of  V₀

[tex]t = \sqrt{\frac{2H}{g} }[/tex]    ,    v₁t  =  0.3503 ,    ( v₀t ) = 1.09 m

To obtain the value of  V₀  

Divide ( v₀t ) by ( v₁t )  =  1.09 / 0.3503 = 3.11 v₁

∴ V₀ = 3.11 v₁

Next step : Determine the average force of friction ( f )

given that loss of energy results in a change in kinetic energy

W = [tex]\frac{1}{2} m ( vo^{2} - v1^{2} )[/tex]

    = 1/2 * 16.3 * 10⁻³ * [ v₀² - [tex](\frac{v_{0} }{3.11} )^{2}[/tex] ]

∴ W = 7.307 * 10⁻³ v₀²

Average force of friction = W / Actual length

                                         = 7.307 * 10⁻³ v₀² / 1  

∴ Average force of friction ( F )  = 7.307 * 10⁻³ v₀²

Hence we can conclude that the average force of friction is 7.307 * 10⁻³ v₀²

Learn more about average force of friction : https://brainly.com/question/16207943

Your question has some missing data below are the missing data related to your question

Mass of the ball :  16.3 g

Predicted range :  0.3503 m

Actual range : 1.09 m

Answer: A nucleus that absorbs at [tex]11.45\delta[/tex] is less shielded and a nucleus that absorbs at [tex]4.13\delta[/tex] will require a stronger applied field

Explanation:

While interpreting the data in NMR, the positions of signals are studied.

The nucleus/ protons having a higher value of [tex]\delta[/tex] are said to be less shielded. They are said to be upfield.

The nucleus/protons having a lower value of [tex]\delta[/tex] are said to be more shielded. They are said to be downfield.

So, a nucleus that absorbs at [tex]11.45\delta[/tex] is less shielded by the nucleus that absorbs at [tex]4.13\delta[/tex]

Also, the less shielded nucleus/protons will require a weak applied field to come into resonance than the more shielded nucleus/protons

So, a nucleus that absorbs at [tex]4.13\delta[/tex] will require a stronger applied field to come into resonance than the nucleus that absorbs at [tex]11.45\delta[/tex]

Answer:

66,7 seconds

Explanation:

the formula for height/distance is : S=v.t

Answer: The energy released as thermal energy is 6.5 J

Explanation:

Energy stored by the spider when it relaxes is given by:

[tex]E_o=\text{Resilience}\times \text{Work}[/tex]

We are given:

Resilience = 0.35

Work done = 10.0 J

Putting values in above equation, we get:

[tex]E_o=0.35\times 10\\\\E_o=3.5J[/tex]

Energy released at thermal energy is the difference between the work done and the energy it takes to relaxes, which is given by the equation:

[tex]E_T=\text{Work done}-E_o[/tex]

Putting values in above equation, we get:

[tex]E_T=(10-3.5)=6.5J[/tex]

Hence, the energy released as thermal energy is 6.5 J

The energy released as thermal energy when 10 J of work is done to stretch silk will be 6.5 J

Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy.

Energy stored by the spider when it relaxes is given by:

[tex]\rm E_o=Resilience \ \times Work[/tex]

We are given:

Resilience = 0.35

Work done = 10.0 J

Putting values in above equation, we get:

[tex]\rm E_o=0.35\times 10[/tex]

[tex]E_o=3.5\ J[/tex]

Energy released at thermal energy is the difference between the work done and the energy it takes to relaxes, which is given by the equation:

[tex]E_T=\rm Work done -E_o[/tex]

Putting values in above equation, we get:

[tex]E_T=(10-3.5)=6.5\ J[/tex]

Hence, the energy released as thermal energy is 6.5 J

To know more about thermal energy follow

https://brainly.com/question/19666326

Answer:

Explanation:

From the given information:

The initial PE [tex](PE)_i[/tex] = m×g×h

= 5 kg × 9.81 m/s² × 10 m

= 490.5 J

The change in Potential energy P.E of the box is:

ΔP.E = [tex]P.E_f -P.E_i[/tex]

ΔP.E = 0 - [tex](PE)_i[/tex]

ΔP.E = [tex]-P.E_i[/tex]

If we take a look at conservation of total energy for determining the change in the internal energy of the box;

[tex]\Delta P.E + \Delta K.E + \Delta U = 0[/tex]

[tex]\Delta U = -\Delta P.E - \Delta K.E[/tex]

this can be re-written as:

[tex]\Delta U =- (-\Delta P.E_i) - \Delta K.E[/tex]

Here, K.E = 0

Also, 70% goes into raising the internal energy for the box;

Thus,

[tex]\Delta U =(70\%) \Delta P.E_i-0[/tex]

[tex]\Delta U =(0.70) (490.5)[/tex]

ΔU = 343.35  J

Thus, the magnitude of the increase is = 343.35 J

Answer:

We can help to keep it magnificent for ourselves, our children and grandchildren, and other living things besides us.

Explanation:

5 ways our governments can confront climate change

PROTECT AND RESTORE KEY ECOSYSTEMS

SUPPORT SMALL AGRICULTURAL PRODUCERS

PROMOTE GREEN ENERGY

COMBAT SHORT-LIVED CLIMATE POLLUTANTS

BET ON ADAPTATION, NOT JUST MITIGATION

Answer:

(c) at rest

Explanation:

Given

See attachment for the distance time graph

Required

What does the graph illustrate?

From the graph, we can see that the line of distance is a horizontal line.

This suggests that a time increases, the distance remains unchanged

When distance remains unchanged over time, then it means the object is at rest.

Hence, (c) is correct

Answer:

Sorry I don't know the answer

Answer:

a)   μ = 0.0136, b)   F = 22.8 N

Explanation:

This exercise must be solved in parts. Let's start by using conservation of moment.

a) We define a system formed by the downward and the box, therefore the forces during the collision are internal and the momentum is conserved

initial instant. Before the crash

        p₀ = m v₀

final instant. After inelastic shock

        p_f = (m + M) v

the moment is preserved

        p₀ = p_f

        m v₀ = (m + M) v

        v = [tex]\frac{m}{m + M} \ v_o[/tex]

We look for the speed of the block with the bullet inside

        v = [tex]\frac{0.00325}{0.00325 + 2.50 } \ 345[/tex]

        v = 0.448 m / s

Now we use the relationship between work and kinetic energy for the block with the bullet

in this journey the force that acts is the friction

         W = ΔK

          W = ½ (m + M) [tex]v_f^2[/tex]  - ½ (m + M) v₀²

the final speed of the block is zero

the work between the friction force and the displacement is negative, because the friction always opposes the displacement

         W = - fr x

we substitute

           - fr x = 0 - ½ (m + M) vo²

           fr = ½ (m + M) v₀² / x

the friction force is

          fr = μ N

          μ = fr / N

equilibrium condition

          N - W = 0

          N = W

          N = (m + M) g

we substitute

         μ = ½ v₀² / x g

we calculate

          μ = ½ 0.448 ^ 2 / 0.75 9.8

          μ = 0.0136

b) Let's use the relationship between work and the variation of the kinetic energy of the block

          W = ΔK

initial block velocity is zero vo = 0

         F x₁ = ½ M v² - 0

         F = [tex]\frac{1}{2} M \frac{x}{y} \frac{v^2}{x1}[/tex]

         F = ½ 2.50 0.448² / 0.0110

         F = 22.8 N

I= 0.39 A

OPTION B is the correct answer.

Answer:

The number of photons in the pulse is 1.04 x 10²⁴

Explanation:

Given;

frequency of the emitted photons, f = 2.83 x 10¹¹ Hz

duration of the incident light, t = 3 ms = 3 x 10⁻³ s

power of the incident light, P = 65,000 W

The energy of each photon emitted is calculated as;

E = hf

where;

h is Planck's constant, = 6.626 x 10⁻³⁴ Js

E =  6.626 x 10⁻³⁴ x  2.83 x 10¹¹

E = 1.875 x 10⁻²² J

let the number of photons in the pulse = n

n(E)= Power x time

[tex]n = \frac{Pt}{E} \\\\n = \frac{65,000 \times 3\times 10^{-3}}{1.875 \times 10^{-22}} \\\\n = 1.04 \times 10^{24} \ photons[/tex]

Answer: 4

Explanation:

MA = output force / input force

MA = 20 / 5

MA = 4

Hope this helps.  Please mark brainliest.

OPTION C is the correct answer.

OPTION C is the correct answer.

The radioactive decay follows the first order kinetics. The number of atoms decaying at any time is proportional to the number of atoms present at that instant. The amount of sample left is 2.02 x 10¹⁶nuclei. The correct option is C.

The time required for the decay of one half of the amount of the species is defined as the half-life period of a radionuclide. The half-life period is a characteristic of a radionuclide. The half lives can vary from seconds to billions of years.

The isotope decay of an atom is given by the equation:

ln [A] = -kt + ln [A]₀

The rate constant, k is:

k = ln 2 / Half life

k = ln 2 / 4.96 x 10³

k = 1.40 × 10⁻⁴ s⁻¹

t = 1.98 x 10⁴

[A]₀ = 3.21 x 10¹⁷

ln [A] = -1.40 × 10⁻⁴  ×  1.98 x 10⁴ + ln [3.21 x 10¹⁷] = 37.538

[A] = 2.02 x 10¹⁶ nuclei

Thus the correct option is C.

To know more about half-life, visit;

https://brainly.com/question/24710827

#SPJ3

Answer:

The period the field must be reduced to zero is 9.81 x 10⁻⁵ s

Explanation:

Given;

initial value of the magnetic field, B₁ = 0.276 T

number of turns of the solenoid, N = 517 turns

diameter of the solenoid, d = 10.5 cm = 0.105 m

induced emf, = 12.6 kV = 12,600 V

when the field becomes zero, then the final magnetic field value, B₂ = 0

The induced emf is given by Faraday's law;

[tex]emf = -\frac{NA\Delta B}{t} \\\\emf = -\frac{NA (B_2 -B_1)}{t} \\\\t = -\frac{NA (B_2 -B_1)}{emf}\\\\t = \frac{NA (B_1 -B_2)}{emf}\\\\where;\\\\t \ is \ the \ time \ when \ B = 0 \ \ (i.e\ B_2 = 0)\\\\A \ is \ the \ area \ of \ the \ coil\\\\A = \frac{\pi d^2}{4} = \frac{\pi (0.105)^2}{4} = 0.00866 \ m^2\\\\t= \frac{(517) \times (0.00866)\times (0.276 -0)}{12,600}\\\\t = 9.81 \times 10^{-5} \ s[/tex]

Therefore, the period the field must be reduced to zero is 9.81 x 10⁻⁵ s

Answer:

0 N

Explanation:

This is a trick question, the mass of the wrench would be 0 due to it being in space and has no gravitational pull to weight it down. And since acceleration is defined as the rate and change of velocity with no respect of time and the wrench is moving at a constant velocity, that means the velocity is 0. and since F = m*a it would be F = 0 * 0 = 0 N

Answer:

For (a): The chemical shift is [tex]2.08\delta[/tex]

For (b): The chemical shift is [tex]9.85\delta[/tex]

For (c): The chemical shift is [tex]7.5\delta[/tex]

Explanation:

To calculate the chemical shift, we use the equation:

[tex]\text{Chemical shift in ppm}=\frac{\text{Peak position (in Hz)}}{\text{Spectrometer frequency (in MHz)}}[/tex]

Given value of spectrometer frequency = 200 MHz

Given peak position = 416 Hz

Putting values in above equation, we get:

[tex]\text{Chemical shift in ppm}=\frac{416Hz}{200MHz}\\\\\text{Chemical shift in ppm}=2.08\delta[/tex]

Given peak position = [tex]1.97\times 10^3 Hz[/tex]

Putting values in above equation, we get:

[tex]\text{Chemical shift in ppm}=\frac{1.97\times 10^3Hz}{200MHz}\\\\\text{Chemical shift in ppm}=9.85\delta[/tex]

Given peak position = [tex]1.50\times 10^3 Hz[/tex]

Putting values in above equation, we get:

[tex]\text{Chemical shift in ppm}=\frac{1.50\times 10^3Hz}{200MHz}\\\\\text{Chemical shift in ppm}=7.5\delta[/tex]

Answer:

the answer is option B because opposit sides of the magnets attract each other