In which sound wave application are sound waves absorbed?

Answers

Answer 1

Answer: ultrasonic cleaners

Explanation:

Answer 2

To solve this we must be knowing each and every concept related to  sound wave. Therefore, in ultrasonic cleaners, sound waves are absorbed.

What is sound wave?

A sound is a type of energy or a vibration that moves through a material such as air or water. Sound may pass through such a gaseous medium as well. It is anything that is audible. The velocity of sound varies depending on the medium.

A wave is a medium that transmits energy from one location to another. Waves are classified into three types: transverse waves, longitudinal waves, or surface waves.

Transverse waves transport the material back and forth in a right angle towards the energy movement. Longitudinal waves transmit energy through compressing then expanding the medium, allowing the energy to travel ahead. In ultrasonic cleaners, sound waves are absorbed.

Therefore, in ultrasonic cleaners, sound waves are absorbed.

To know more about sound wave, here:

https://brainly.com/question/29767263

#SPJ2


Related Questions

why are the group 17 elements the most reactive of the nonmetal elements a)they are the biggest elements b)they have the fewest electrons c)they are located on the farthest right side of the periodic table d)they require only one electron to fill their outer energy level

Answers

Answer:

I think the answer is D-they require onky one electron to fill their outer energy level.

The ____ is a line drawn at a right angle to a barrier. a. normal c. node b. ray d. wave front

Answers

Answer:

a. normal

Explanation:

In the field of physics the normal is a line drawn at a right angle to a barrier. In other words the normal line is the line that is drawn perpendicular (right angle, 90 degrees) to the reflective surface of a mirror, or the particular boundary in which refraction occurs at the point of incidence of a light ray. This can be seen in the picture attached below.

A paint brush is dropped from the top of a tall ladder and free falls to the ground. What changes, if any, would be observed of the velocity and the acceleration of the brush as it falls? Pick the two answers. The velocity increases. The velocity decreases. The velocity remains a constant value. The acceleration increases. The acceleration decreases. The acceleration remains a constant value.

Answers

Answer:

Explanation:

As the paint brush is dropped from the top of a tall ladder it started free falling

i.e. velocity of brush increases as it falls down due to the acceleration provided by gravity.

We know acceleration due to gravity is the attraction experienced by the object due to earth attraction

Value of acceleration due to gravity is constant i.e. [tex]9.8\ m/s^2[/tex]

Therefore the correct choice is

velocity is increasing and acceleration is constant

El dibujo muestra donde se encuentra un caracol en distintos instantes de tiempo.?Podemos afirmar que se trata de un movimiento acelerado?Razona tu respuesta

Answers

Answer:

if the acceleration is zero the displacements are equal in the same time interval, so we would see the points equally spaced in the diagram

if the acceleration is different from zero in these cases the intervals are different in the same time intervals

Explanation:

In a drawing of displacement as a function of time, we can know if in motion it is steely or not, the relationship that describes the motion is

            x = v₀ t + ½ a t²

we see that we have two cases:

* if the acceleration is zero the displacements are equal in the same time interval, so we would see the points equally spaced in the diagram

* if the acceleration is different from zero in these cases the intervals are different in the same time intervals. In the case of positive acceleration the points are spaced and in the chaos negative acceleration the points are getting closer to each other

Two water waves meet at the same point, one having a displacement above equilibrium of 60 cm and the other having a displacement above equilibrium of 80 cm.

Answers

Answer:

The resultant displacement is 140 cm

Explanation:

say first displacement d₁ is 60 cm

and second displacement d₂ is 80 cm

Resultant displacement = d₁ + d₂

= 60 + 80

= 140 cm

Answer:

Explanation:

To solve this problem it will be necessary to apply the interference principle.

Under this principle interference is understood as a phenomenon in which two or more waves overlap to form a resulting wave of greater, lesser or equal amplitude. In this case, if both are at the same point, the result of the total displacement will be the sum of the individual displacements, therefore

[tex]x = \sum h_i\\\\x = 60cm + 80cm\\\\x =140cm[/tex]

Therefore the resulting displacement above equilibrium is 140cm

How does the temperature of water affect the speed of the sound waves?

Answers

Answer:

Temperature is also a condition that affects the speed of sound. Heat, like sound, is a form of kinetic energy. Molecules at higher temperatures have more energy, thus they can vibrate faster. Since the molecules vibrate faster, sound waves can travel more quickly.

In an inelastic collision, which of the following statements is always true?

[A] Kinetic energy is conserved in the collision.
[B] Momentum is conserved in the collision.
[C] After the collision, the objects always merge into one.
[D] The collision takes more that 1 second to complete.

Answers

Well C is definitely one of the correct answers.

Answer: A

Explanation:

A

Are carbon compounds rigid and strong

Answers

yes, but it takes a lot of energy to break all those iconic bonds .

The passage helps the reader to draw conclusions about which character's perspective? ºAlec ºAlice ºAlec's father ºAlec's mother

Answers

Answer:

I think it might be A: Alec but tell me if I'm wrong

Explanation:

Answer:

a

Explanation:

i did it on e d g e n u i t y

How far can you get away from your little brother with a paintball marker if you can travel at 3 m/s and you have 15s before he sees you?

Answers

I hate my sister so. Much just need points

Jenny and Fred both play a long note on their trombones. A stationary observer hears the sound increasing and decreasing repeatedly in loudness. Which of these must be true?
A.The sound waves from the two trombones have slightly different frequencies.
B. The sound waves from the two trombones have the same frequency.
C. The sound waves from the two trombones have slightly different amplitudes.
D. The sound waves from the two trombones have the same wavelength.
E. The sound waves from the two trombones have slightly different velocities.

Answers

Answer:

A.The sound waves from the two trombones have slightly different frequencies.

Explanation:

This is because, a difference in frequency of waves from two different sources would result in either constructive or destructive interference of the waves. Thereby, causing the observer to hear the sound increasing or decreasing.

Answer:

A.The sound waves from the two trombones have slightly different frequencies.

The baker needs 9 eggs, 6 cups of flour, 3 cups of sugar, and 3 sticks of butter to make a total of 3 cakes.. The baker only has 2 sticks of butter. That means the butter is the ___________ because the baker can only make 2 cakes!
Question 19 options:


Product


Reactant


Limiting reactant


Spontaneous reactant

Answers

Answer: Limiting reactant

Explanation:

The limiting reactant is a reactant will get completely consumed up in the reaction. This reactant being in low concentration will lead to the formation of limited amount of product.

In the given situation, since the butter cakes are required to be 3 sticks for making 3 cakes but only 2 cakes are available thus the butter stick is the limiting reactant.

What is the formula for velocity???

Answers

Explanation:

divide the distance by the time it takes to travel that same distance, then add your direction to it.

Or change in displacement divided by change in time.

2. A new racecar track is being created, and the owners want the cars to complete 10
miles in 7 laps. What does the diameter of the track have to be to meet their
requirements?

Answers

Answer:

0.45 miles

Explanation:

since, car will be running on the edge of track, distance covered in one lap by car will be equal to circumference of track.\

we will use value of pi as 22/7

Circumference for any circular shape is given by [tex]\piD[/tex][tex]\pi D[/tex]

Hence, in one lap [tex]\pi D[/tex] distance will be covered

in 7 laps [tex]7 \pi D[/tex] distance will be covered.

but is given that 7 laps should be equal to 10 miles

so 10 miles will be equal to [tex]7\pi D[/tex]

[tex]7\pi D= 10 \ miles\\=> 7*(22/7)* D= 10 \ miles\\=> 22D = 10 \ miles\\=> D = 10/22 \ miles\\=> D = 0.45 \ miles[/tex]

Thus, diameter of track will be 0.45 miles to meet the requirement.

I’m a freshman, I got a 80% in the first quarter, 85% in the second and 70% in the third. I have a 46% in the fourth and 34 total absences in the class. If I fail, will I fail the class or the entire grade

Answers

Answer:

you will pass but if your grade become lower and u get more absences you will fail

What energy transformations take place in Joule's system?

Answers

The gravitational potential energy from the wheel, turns into motion energy.
The Motion energy turns into thermal energy because the water temperature rising.

Rafael swings a baseball bat with a force of 25 N. The baseball bat exerts a force of 5 N on the baseball. What is the mechanical advantage of the baseball bat? The mechanical advantage of the baseball bat is

Answers

Answer:

0.2

Explanation:

Mechanical Advantage is defined as the ratio of force output with respect to the force input. Thus,

MA = output / input

MA = 5 / 25

MA = 1/5

MA = 0.2

Since this value is less then one. Even though it's tagged a mechanical advantage, in reality it would be mechanical disadvantage.

Therefore, we can say that the mechanical advantage of the baseball bat is 0.2

Answer:

0.2

Explanation:

Which structure connects muscles to bone?

Answers

Answer: tendons connect muscles to bones

Explanation:

How does the current values in and out of the battery compare to the sum of currents going through the light bulbs?

Note: This is for Parallel circuits.

Answers

The current values in and out of the battery is going to be equal to the sum of the currents going through the light bulbs. In a parallel circuit, the current is divided as it enters different branches and light bulbs. However, the amount of current leaving the battery is always going to be the same as the amount of current entering the battery. Therefore, while current divides in a parallel circuit, the total amount of current always remains the same.

Gold, quartz, and talc are minerals. Copper and iron are types of ore. What is the difference between minerals and ores?

A mineral is a non-living, solid substance that can be extracted from the ground. Ore is a type of mineral made up of metals.

An ore is non-living and solid with little value unless it occurs in large amounts, in which case it is a mineral.

O A mineral is a valuable form of ore that can be extracted from the ground

O A mineral is a non-living, solid substance made of elements. Ore is a large deposit of one or more valuable minerals in the ground.

Answers

Answer:

A mineral is a valuable form of ore that can be extracted from the ground

Explanation:

Gold, quartz and talc are minerals because they are found in the earth in a valuable form of ore while ores are rocks that contain valuable concentrations of minerals.that can be mined.

An ORE in general term can be said to be a mineral deposit that contains enough Minerals that can be mined in commercial quantities while Minerals are valuable components of an Ore that can be mined ( naturally occurring ) in an ORE.

The half-life of cobalt-60 is 5.26 years. If 50 grams are left after 15.78 years, how many grams were in the original sample?

Answers

Answer:

Explanation:

Half life  = 5.6

no of half life in 15.78 years = 15.78 / 5.26

= 3 .

[tex]N = N_0(\frac{1}{2})^n[/tex]

N₀ is original mass , N is mass after n number of half lives.

Inserting the given data in the equation above

[tex]50 = N_0(\frac{1}{2})^3[/tex]

N₀ = 50 x 2³

= 400 gm .

original sample will contain 400 gms of sample.

Which phrases describe all the outer planets’ motion? Select two options.

no rotation
fast rotation
slow revolution
opposite revolution
north to south rotation

Answers

Answer:

Fast rotation

Slow revolution

Explanation:

Solar system has 8 planets. 4 inner rocky planets - Mercury, Venus, Earth and Mars and 4 outer gaseous planets - Jupiter, Saturn, Uranus and Neptune.  The outer planets have few common features.

They are gaseous. There  period of revolution is larger than the inner planets which means that they have slow revolution about the Sun. One day on the outer planets is smaller than the inner planets which means they have fast rotation.

For example, Jupiter has revolves around sun in 11.86 Earth years and rotates about axis in 9.8 Earth hours. Uranus revolves around sun in 84 Earth years and rotates on its axis 17.9 Earth hours.

Answer:

Fast rotation

Slow revolution

Explanation:

did the test

How do coal deposits found in the U.S. and Serbia help prove the theory of continental drift?

Answers

Answer:

Wegner's hypothesis met with wide skepticism, but found support and development in ... theory because Wegener could not satisfactorily explain how the continents moved.

Explanation:

Some of his theory was proven wrong, but he was still correct about his hypothesis. The fossils were part of proof for the theory because some of the fossils were found on shore line. And, some of those animals couldn't swim. So, this is proof that some animals lived on the land. And over time the land drifted apart.

Which of the following are two factors that determine speed?
a. acceleration and time
b. distance and time
c. velocity and time
d. motion and time

Answers

Answer:

B) Distance and Time

Explanation:

Equation for speed: S = D / T

Speed equals the distance you traveled divided by the amount of time it took to get to that destination.

The two factors which are required to determine the speed of a object are distance traveled by it and time taken by it.

What is speed?

The speed is the rate at which the total distance by a object is traveled in the time taken.

Speed of a object can be given as,

[tex]s=\dfrac{d}{t}[/tex]

Here, (d) is the distance traveled by the object and (t) is time taken but the object to cover that distance.

As the unit of the distance is measured in the meter and the time measure in the second. Thus the speed of a object is measured in the meter per second.

In the vehicles the speed of vehicle is also measured in the kilometre per hour or miles per hour.

Hence, the two factors which are required to determine the speed of a object are distance traveled by it and time taken by it.

Thus the option B is the correct option.

Learn more about the speed here;

https://brainly.com/question/359790

Un semáforo de 80N cuelga del punto medio de un cable de 30m tendido entre 2 postes. Halle la tensión en cada segmento del cable si éste tiene un pandeo que lo hace descender una distancia vertical de 1m

Answers

Answer:

T1 = T2 = 602.33 N

Explanation:

I attached an image of the forces diagram below.

The x component of the forces for this cases is:

[tex]\Sigma F_x=T_1cos\theta-T_2cos\theta=0\\\\T_1cos\theta=T_2cos\theta\\\\T_1=T_2[/tex]

And the y components:

[tex]\Sigma F_y=T_1sin\theta+T_2sin\theta-W=0\\\\T_1=T_2=T\\\\\Sigma F_y=2Tsin\theta=W\\\\T=\frac{W}{2sin\theta}[/tex]

The angle is calculated by using the information about the length of the cable and the vertical distance of the traffic light:

[tex]\theta=tan^{-1}(\frac{1}{15})=3.81\°[/tex]

Thus, you obtain:

[tex]T=\frac{80N}{2(sin3.81\°)}=601.33N[/tex]

hence, the tension in both segments of the cable is 602.33 N

a man is trying to move a piano by himself, but it will not move, what force must they overcome to start the piano moving?

Answers

Answer:

The friction of the piano and the weight

Explanation:

En la etiqueta de un bote de fabada de 350 g, leemos que su aporte energético es de 1630 kj por cada 100 g de producto a) La cantidad de fabada que tiene que comer un hombre si su necesidad energética diaria es 2500 kj para sobrevivir b) El aporte calórico del bote de fabada en calorías

Answers

Answer:

(a) 153.37 g

(b) 5705 kJ

Explanation:

(a) To find the amount of bean needed by a man you first calculate the equivalence in beans to 2500kJ

[tex]2500kJ*\frac{100g}{1630kJ}=153.37\ g[/tex]

Thus, 153.37 g has the energy needed by a man that needs 200kJ per day.

(b) The amount of energy per pot of bean is given by:

[tex]E=350g*\frac{1630kJ}{100g}\\\\E=5705\ kJ[/tex]

Thus, the energy is 5705kJ

An ice skater spins at 2.5 rev/s when his arms are extended. He draws his arms in and spins at 10.0 rev/s. By what factor does his moment of inertia change in the process?

Answers

Answer:

The moment of inertia decreased by a factor of 4

Explanation:

Given;

initial angular velocity of the ice skater, ω₁ = 2.5 rev/s

final angular velocity of the  ice skater, ω₂ = 10.0 rev/s

During this process we assume that angular momentum is conserved;

I₁ω₁ = I₂ω₂

Where;

I₁ is the initial moment of inertia

I₂ is the final moment of inertia

[tex]I_2 = \frac{I_1 \omega_1}{\omega_2} = \frac{I_1*2.5}{10} \\\\I_2 = 0.25I_1 = \frac{1}{4}I_1[/tex]

Therefore, the moment of inertia decreased by a factor of 4

What causes atoms to bond together
?!?

Answers

Answer:

electrostatic attraction

Explanation:

Atoms form chemical bonds with other atoms when there's an electrostatic attraction between them. This attraction results from the properties and characteristics of the atoms' outermost electrons, which are known as valence electrons.

Electrostatic attraction

An air-track glider attached to a spring oscillates between the 10.0 cm mark and the 61.0 cm mark on the track. The glider completes 11.0 oscillations in 31.0 s

Answers

Answer:

T = 2.82 seconds.

The frequency [tex]\mathbf{f = 0.36 \ Hz}[/tex]

Amplitude A = 25.5 cm

The maximum speed of the glider is [tex]\mathbf{v = 56.87 \ rad/s}[/tex]

Explanation:

Given that:

the time taken for 11 oscillations is 31 seconds ;

SO, the time taken for one oscillation is :

[tex]T = \frac{31}{11}[/tex]

T = 2.82 seconds.

The formula for calculating frequency can be expressed as :

[tex]f = \frac{1}{T}[/tex]

[tex]f = \frac{1}{2.82}[/tex]

[tex]\mathbf{f = 0.36 \ Hz}[/tex]

The amplitude is determined by using the formula:

[tex]A = \frac{d}{2}[/tex]

The limits that the spring makes the oscillations are from 10 cm to 61 cm.

The distance of the glider is, d = (61 - 10 )cm = 51 cm

Replacing 51 for d in the above equation

[tex]A = \frac{51}{2}[/tex]

A = 25.5 cm

The maximum speed of the glider is:

[tex]v = A \omega[/tex]

where ;

[tex]\omega = \frac{2 \pi}{T}[/tex]

[tex]\omega = \frac{2 \pi}{2.82}[/tex]

[tex]\omega = 2.23 \ rad/s[/tex]

[tex]v = A \omega[/tex]

[tex]v = 25.5 *2.23[/tex]

[tex]\mathbf{v = 56.87 \ rad/s}[/tex]

Other Questions
In these sentences, the speaker is appealing to 5/6 x=10/3 solve for X Please help WILL MARK BRAINLIEST What do mexicans refer the mexican american war as Many of the features of the Parthenon can be found in what modern American monument? The Washington MonumentThe Capitol buildingThe Lincoln MonumentThe White House Help me out!!!! What is it What is the area of sector GPH? what best describes a tetrad The amount of money 'y' made at a laundromat after 'x' months can be represented by the linear function: y = 8.50x - 5. After 2 months, the laundromat made 20 dollars, but the linear function predicted they would make 12 dollars. What is the residual value for this data? When a person reads a poem aloud, which technique is most effective forconveying the emotional tone of the poem?A. Read the poem in a sad or angry voiceB. Use a pace that is appropriate for the tone of the poemC. Use a variety of accents) D. Read the poem softly so the audience must guess at the words Write a program to read as many test scores as the user wants from the keyboard (assuming at most 50 scores). Print the scores in (1) original order, (2) sorted from high to low (3) the highest score, (4) the lowest score, and (5) the average of the scores. Implement the following functions using the given function prototypes: void displayArray(int array[], int size) - Displays the content of the array void selectionSort(int array[], int size) - sorts the array using the selection sort algorithm in descending order. Hint: refer to example 8-5 in the textbook. int findMax(int array[], int size) - finds and returns the highest element of the array int findMin(int array[], int size) - finds and returns the lowest element of the array double findAvg(int array[], int size) - finds and returns the average of the elements of the array I saw the dog...........out of the house.a. runb. is runningc. rand. was running. Determinai numrul protonilor i cel al neutronilor n nucleul atomuluide beriliu .Determinai structura nucleelor izotopilor de uraniu i de toriu Care fore se numesc fore nucleare. Enumerai particularitile forelor nucleare 123..4568910Which set of data does not contain any outliers?113, 115, 103, 154, 109, 111, 119141, 151, 111, 142, 149, 140, 15099, 103, 91, 104, 109, 107, 97131, 135, 131, 99, 138, 136, 140 i need help ASAP. you need to be good at fractions.fill in the missing numbers:2/3 = _/6 = 12/_ = _/21 Which type of graph would you use to show the number of pages in each book on the bookshelf? whats the product for (2z-3)^3 Write the interface (.h file) of a class Counter containing: A data member counter of type int. A data member named counterID of type int. A static int data member named nCounters. A constructor that takes an int argument. A function called increment that accepts no parameters and returns no value. A function called decrement that accepts no parameters and returns no value. A function called getValue that accepts no parameters and returns an int. A function named getCounterID that accepts no parameters and returns an int. What kind of energy transformations occur when you hit a coconut with a hammer A national organization has been working with utilities throughout the nation to find sites for large wind machines that generate electricity. Wind speeds must average more than 15 miles per hour (mph) for a site to be acceptable. Recently, the organization conducted wind speed tests at a particular site. Based on a sample of wind speed recordings (taken at random intervals), the wind speed at the site averaged with a standard deviation of To determine whether the site meets the organization's requirements, consider the test, where is the true mean wind speed at the site and Fill in the blanks. "A Type I error in the context of this problem is to conclude that the true mean wind speed at the site _____ 15 mph when it actually _____ 15 mph."