Answer:
output
Explanation:
it can be seen and touched
Select the correct statement(s) regarding DCE and DTE interfaces.
a. DTE and DCE describes the device types (e.g., computers, switches, routers, etc.)
b. distinguishing between DTE and DCE is only required for half-duplex communications
c. DTE and DCE describes the interface and direction of data flow between devices; a single device may have both types of interfaces
d. all statements are correct
Answer:
The correct statement regarding DCE and DTE interfaces is:
c. DTE and DCE describes the interface and direction of data flow between devices; a single device may have both types of interfaces.
Explanation:
DTE stands for Data Terminal Equipment. It is a device that initiates or controls a device's serial connection. The term DCE stands for Data Communications Equipment. It is a device that is used to a modem or other communication interfaces to the DTE device. DTE is a communication receptor, while DCE is a communication broadcaster or distributor.
A technician is configuring the static TCP/IP settings on a client computer.
Which of the following configurations are needed for internet communications?
a. DHCP server address
b. DNS server address
c. Default gateway address
d. WINS address
e. APIPA address
f. Alternate IP address
g. IP address including a subnet mask (IPv4) or subnet prefix length (IPv6)
Answer:
The answer is below
Explanation:
Considering the situation and the available options above, the following configurations are needed for internet communications:
B. DNS server address: this matches the domain name to the IP address of a website such that browsers can bring internet resources.
C. Default gateway address: this uses the internet protocol suites and serves as a router to other networks in the absence of other route specifications that could match the destination IP address of a packet.
G. IP address including a subnet mask (IPv4) or subnet prefix length (IPv6): this is used by the internet-connected device to receive messages.
discuss the first three phases of program development cycle
Answer:
Known as software development life cycle, these steps include planning, analysis, design, development & implementation, testing and maintenance.
Tips for Interactions with Personalized LinkedIn Outreach?
Answer:
Follow the best strategies for personalized LinkedIn outreach through 2021.
Run an Outreach Campaign for niche-specific People Collect Data about your Audience Keep your message short Save your Sale Pitches for later Give them a reason to reply to you
Write a recursive function that calculates the sum 11 22 33 ... nn, given an integer value of nin between 1 and 9. You can write a separate power function in this process and call that power function as needed:
Answer:
The function in Python is as follows:
def sumDig(n):
if n == 1:
return 11
else:
return n*11 + sumDig(n - 1)
Explanation:
This defines the function
def sumDig(n):
This represents the base case (where n = 1)
if n == 1:
The function returns 11, when it gets to the base case
return 11
For every other value of n (n > 1)
else:
This calculates the required sum recursively
return n*11 + sumDig(n - 1)
Resize vector countDown to have newSize elements. Populate the vector with integers {newSize, newSize - 1, ..., 1}. Ex: If newSize = 3, then countDown = {3, 2, 1}, and the sample program outputs:
#include
#include
using namespace std;
int main() {
vector countDown(0);
int newSize = 0;
int i = 0;
newSize = 3;
STUDENT CODE
for (i = 0; i < newSize; ++i) {
cout << countDown.at(i) << " ";
}
cout << "Go!" << endl;
return 0;
}
Answer:
Following are the code to the given question:
#include <iostream>//defining header file
#include <vector>//defining header file
#include <numeric>//defining header file
using namespace std;
int main()//main method
{
vector<int> countDown(0);//defing an integer array variable countDown
int newSize = 0;//defing an integer variable newSize that holds a value 0
int i = 0;//defing an integer variable i that initialize with 0
newSize = 3;// //use newSize to hold a value
countDown.resize(newSize,0);// calling the resize method that accepts two parameters
for (i = 0; i < newSize; ++i)//defining a loop that reverse the integer value
{
countDown[i] = newSize -i;//reverse the value and store it into countDown array
cout << countDown.at(i) << " ";//print reverse array value
}
cout << "Go!" << endl;//print message
return 0;
}
Output:
3 2 1 Go!
Explanation:
In the given code inside the main method an integer array "countDown" and two integer variables "newSize and i" is declared that initializes a value that is 0.
In the next step, an array is used that calls the resize method that accepts two parameters, and define a for a loop.
In this loop, the array is used to reverse the value and print its value with the message.
Write a java program that reads a list of integers and outputs those integers in reverse. The input begins with an integer indicating the number of integers that follow. For coding simplicity, follow each output integer by a comma, including the last one. Assume that the list will always contain fewer than 20 integers.
Ex: If the input is:
5 2 4 6 8 10
the output is:
10,8,6,4,2,
To achieve the above, first read the integers into an array. Then output the array in reverse.
Answer:
Explanation:
using namespace std;
#include <iostream>
int Go()
{
int N;
int A[20];
cout << " How many integers do you have ??? :>";
cin >> N;
if (N>20) { N=20; }
for (int iLoop=0; iLoop<N; iLoop++)
{
cout << "Input integer # " << (iLoop+1) << " :>";
cin >> A[iLoop];
}
for (int iLoop=N-1; iLoop>=0; iLoop--)
{
cout << A[iLoop] << " ";
}
cout << endl;
}
int main()
{
Go();
}
A Java program that reads a list of integers and outputs them in reverse is written as,
import java.util.Scanner;
public class ReverseList {
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
// Read the number of integers
int numIntegers = scnr.nextInt();
// Create an array to store the integers
int[] integers = new int[numIntegers];
// Read the integers into the array
for (int i = 0; i < numIntegers; i++) {
integers[i] = scnr.nextInt();
}
// Output the integers in reverse order
for (int i = numIntegers - 1; i >= 0; i--) {
System.out.print(integers[i]);
// Add comma unless it's the last integer
if (i > 0) {
System.out.print(",");
}
}
System.out.println(); // Add a new line at the end
}
}
Given that,
Write a Java program that reads a list of integers and outputs those integers in reverse.
Here, The input begins with an integer indicating the number of integers that follow.
For coding simplicity, follow each output integer by a comma, including the last one.
So, A Java program that reads a list of integers and outputs them in reverse:
import java.util.Scanner;
public class ReverseList {
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
// Read the number of integers
int numIntegers = scnr.nextInt();
// Create an array to store the integers
int[] integers = new int[numIntegers];
// Read the integers into the array
for (int i = 0; i < numIntegers; i++) {
integers[i] = scnr.nextInt();
}
// Output the integers in reverse order
for (int i = numIntegers - 1; i >= 0; i--) {
System.out.print(integers[i]);
// Add comma unless it's the last integer
if (i > 0) {
System.out.print(",");
}
}
System.out.println(); // Add a new line at the end
}
}
Read more about java programming language at:
brainly.com/question/2266606
#SPJ4
Long Answer Questions: a. Briefly explain the types of Control Structures in QBASIC.
Answer:
The three basic types of control structures are sequential, selection and iteration. They can be combined in any way to solve a specified problem. Sequential is the default control structure, statements are executed line by line in the order in which they appear.
Ranges of up addresses that anyone can use for their internal networks are known as
shooting phases in film and video editing
Answer:
Filmmaking involves a number of complex and discrete stages including an initial story, idea, or commission, through screenwriting, casting, shooting, sound recording and pre-production, editing, and screening the finished product before an audience that may result in a film release and an exhibition.
how many copies of each static variable and each class variable are created when 10 instances of the same class are created
Answer:
Static variables are initialized only once
Explanation:
Only one copy of static variables are created when 10 objects are created of a class
A static variable is common to all instances of a class because it is a class level variable
Can you suggest a LinkedIn Helper (automation tool) alternative?
Answer:
Have you tried LinkedCamp alternative to LinkedIn Helper?
Well, LinkedCamp is a super-efficient cloud-based LinkedIn Automation Tool that empowers businesses and sales industries to drive more LinkedIn connections, hundreds of leads, sales, and conversions automatically.
Some other LinkedIn automation tools are:
Meet Alfred Phantombuster WeConnect ZoptoExpandiHope you find it useful.
Good luck!
The conversion rate would be the highest for keyword searches classified as Group of answer choices buyers grazers researchers browsers
Answer:
buyers
Explanation:
Search engine optimization (SEO) can be defined as a strategic process which typically involves improving and maximizing the quantity and quality of the number of visitors (website traffics) to a particular website by making it appear topmost among the list of results from a search engine such as Goo-gle, Bing, Yah-oo etc.
This ultimately implies that, search engine optimization (SEO) helps individuals and business firms to maximize the amount of traffic generated by their website i.e strategically placing their website at the top of the results returned by a search engine through the use of algorithms, keywords and phrases, hierarchy, website updates etc.
Hence, search engine optimization (SEO) is focused on improving the ranking in user searches by simply increasing the probability (chances) of a specific website emerging at the top of a web search.
Typically, this is achieved through the proper use of descriptive page titles and heading tags with appropriate keywords.
Generally, the conversion rate is mainly designed to be the highest for keyword searches classified as buyers because they're the main source of revenue for a business and by extension profits.
hub stake should always be provided with a lath stake so that the information about what the hub represents can be written on the lath stake True False
Answer:
True
Explanation:
To protect them from becoming disturbed by construction operations, hub stakes are placed on both sides of a roadway at a certain distance outside the work zone. The final stakes are connected to the hub stakes, which are used to write the essential information.
As a result, hub stakes are always accompanied with stakes.
Given the code as follows: main() { int i = 3, n; float x; x = i; n = 8 % x; } What problem will occur? Group of answer choices A compilation error will occur. A run time error will occur. An inheritance error will occur. No problem will occur at all.
Answer:
A compilation error will occur.
Explanation:
The % operator does not accept a float as its right-hand operand.
????????????????????????? ???????????????
Answer:
sorry, I don't know what that is
Web-Based Game that serves multiple platforms
Recommendations
Analyze the characteristics of and techniques specific to various systems architectures and make a recommendation to The Gaming Room. Specifically, address the following:
1. Operating Platform: Recommend an appropriate operating platform that will allow The Gaming Room to expand Draw It or Lose It to other computing environments.>
2. Operating Systems Architectures:
3. Storage Management:
4. Memory Management:
5. Distributed Systems and Networks:
6. Security: Security is a must-have for the client. Explain how to protect user information on and between various platforms. Consider the user protection and security capabilities of the recommended operating platform.>
Answer:
Here the answer is given as follows,
Explanation:
Operating Platform:-
In terms of platforms, there are differences between, mobile games and pc games within the way it's used, the operator, the most event play, the sport design, and even the way the sport work. we all know that each one the games on console platforms, PC and mobile, have their own characteristic which has advantages and disadvantages All platforms compete to win the rating for the sake of their platform continuity.
Operating system architectures:-
Arm: not powerful compared to x86 has many limitations maximum possibility on arm arch is mobile gaming.
X86: very powerful, huge development so easy to develop games on platforms like unity and unreal, huge hardware compatibility and support
Storage management:-
On the storage side, we've few choices where HDD is slow and too old even a replacement console using SSD. so SSD is the suggested choice. But wait SSD have also many options like SATA and nvme.
Memory management:-
As recommended windows, Each process on 32-bit Microsoft Windows has its own virtual address space that permits addressing up to 4 gigabytes of memory. Each process on 64-bit Windows features a virtual address space of 8 terabytes. All threads of a process can access its virtual address space. However, threads cannot access memory that belongs to a different process.
Distributed systems and networks:-
Network-based multi-user interaction systems like network games typically include a database shared among the players that are physically distributed and interact with each other over the network. Currently, network game developers need to implement the shared database and inter-player communications from scratch.
Security:-
As security side every game, there's an excellent risk that, within the heat of the instant, data are going to be transmitted that you simply better keep to yourself. There are many threats to your IT.
Define on the whole data protection matters when developing games software may cause significant competitive advantages. Data controllers are obliged under the GDPR to attenuate data collection and processing, using, as an example , anonymization or pseudonymization of private data where feasible.
View "The database tutorial for beginners" and discuss how database management systems are different from spreadsheets. Describe one experience you have had working with data.
Answer and Explanation:
A spreadsheet is an interactive computer application for the analysis and storage of data. The database is a collection of data and accessed from the computer system. This is the main difference between spreadsheets and databases. The spreadsheet is accessed by the user and the database is accessed by the user. The database can store more data than a spreadsheet. The spreadsheet is used for tasks and used in enterprises to store the data. Spreadsheet and database are two methods and the main difference is the computer application that helps to arrange, manage and calculate the data. The database is a collection of data and organized to access easily. Spreadsheet applications were the first spreadsheet on the mainframe. Database stores and manipulates the data easily. The database maintains the data and stores the records of teachers and courses. The spreadsheet is the computer application and analyzing the data in table form. The spreadsheet is a standard feature for productive suite and based on an accounting worksheet.
Write a recursive method to form the sum of two positive integers a and b. Test your program by calling it from a main program that reads two integers from the keyboard and users your method to complete and print their sum, along with two numbers.
Answer:
see the code snippet below writing in Kotlin Language
Explanation:
fun main(args: Array<String>) {
sumOfNumbers()
}
fun sumOfNumbers(): Int{
var firstNum:Int
var secondNum:Int
println("Enter the value of first +ve Number")
firstNum= Integer.valueOf(readLine())
println("Enter the value of second +ve Number")
secondNum= Integer.valueOf(readLine())
var sum:Int= firstNum+secondNum
println("The sum of $firstNum and $secondNum is $sum")
return sum
}
This standard library function returns a random floating-point number in the range of 0.0 up to 1.0 (but not including 1.0).
a. random.b. randint.c. random_integer.d. uniform.
Answer:
The answer would be A: Random
Explanation:
The random() function returns a generated random number (a pseudorandom number)
Create a function called GetColors that will accept two parameters. These parameters can only be red, blue or yellow. Your function needs to analyze these two colors and determine the color mix. Make sure your function returns the color mix back to where it was called.
Answer:
Explanation:
The following code is written in Java. It creates a GetColors method that takes in the two parameter colors of either red, blue or yellow. It combines those colors and returns the mix of the two colors back to the user. A test case has been used in the main method and the output can be seen in the attached image below.
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
System.out.println(GetColors("yellow", "red"));
}
public static String GetColors(String color1, String color2) {
if (color1 == "red") {
if (color2 == "blue") {return "purple";}
else if (color2 == "yellow") {return "orange";}
else {return "red";}
} else if (color1 == "blue") {
if (color2 == "red") {return "purple";}
else if (color2 == "yellow") {return "green";}
else {return "blue";}
} else if (color1 == "yellow") {
if (color2 == "red") {return "orange";}
else if (color2 == "blue") {return "green";}
else {return "yellow";}
} else {
return "Wrong Parameters";
}
}
}
We have removed
A
balls from a box that contained
N
balls and then put
B
new balls into that box. How many balls does the box contain now?
Constraints
All values in input are integers.
Input
Input is given from Standard Input in the following format: n a b
Output
Print the answer as an integer.
There were [tex]N[/tex] balls but we took [tex]A[/tex] balls out, so there are now [tex]N-A[/tex] balls. We add [tex]B[/tex] balls and now we have [tex]N-A+B[/tex] balls.
The program that computes this (I will use python as language has not been specified is the following):
n, a, b = int(input()), int(input()), int(input())
print(f"There are {n-a+b} balls in the box")
# Hope this helps
What is machine learning
Answer:
machine learning is the ability for computers to develop new skills and algorithms without specific instructions to do so.
what is the meaning of compiler
Answer:
in computing it means a program that converts instructions into a machine-code or lower-level form so that they can be read and executed by a computer.
A student registers for a course in a university. Courses may have limited enrollment i.e a student must
enroll atmost 9 credit hours, the registration process must include checks that places are available. Assume
that the student accesses an electronic course catalog to find out about available courses. Which design
model should be followed by this secenario? Draw any two UML diagrams.
Answer:
Follows are the complete question to the given question:
Explanation:
The UML scheme is a UML-based diagram intended to depict the system visually, together with its key actors, roles, activities, objects, and classes, to gather information the about system, change that, or maintain it.
Every complex process is better understood via sketches or pictures. These diagrams have a higher understanding effect. By glancing about, we notice that diagrams are not a new idea but are widely used in various business types. To enhance understanding of the system, we prepare UML diagrams. There is not enough of a single diagram to represent all aspects of the system. You can also create customized diagrams to satisfy your needs. Iterative and incremental diagrams are usually done.
There are two broad diagram categories and that they are broken into subclasses again:
Diagram structureDiagrams of behaviorPlease find the graph file of the question in the attachment.
Usually, in organizations, the policy and mechanism are established by the:
CEO
Team of Exectives
Board of Directors
Stakeholders
none of these
Answer:
Team of exectives
Explanation:
This is right answer please answer my question too
Write a program that uses a stack to test input strings to determine whether they are palindromes. A palindrome is a sequence of characters that reads the same as the sequence in reverse; for example, noon.
Answer:
Here the code is given as follows,
Explanation:
def isPalindrome(x):
stack = []
#for strings with even length
if len(x)%2==0:
for i in range(0,len(x)):
if i<int(len(x)/2):
stack.append(x[i])
elif stack.pop()!=x[i]:
return False
if len(stack)>0:
return false
return True
#for strings with odd length
else:
for i in range(0,len(x)):
if i==int(len(x)/2):
continue
elif i<int(len(x)/2):
stack.append(x[i])
elif stack.pop()!=x[i]:
return False
if len(stack)>0:
return false
return True
def main():
while True:
string = input("Enter a string or Return to quit: ")
if string == "":
break
elif isPalindrome(string):
print("It's a palindrome")
else:
print("It's not a palindrome")
if __name__ == '__main__':
main()
Computer data that is suitable for text
Answer:
Answer:Data Types. Computer systems work with different types of digital data. In the early days of computing, data consisted primarily of text and ...
An e-mail program allows?
A. users to access and view web pages on the internet.
B. geographically separated people to transfer audio and video.
C. real-time exchange of messages or files with another online user.
D. transmission of messages and files via a network such as the internet.
Answer:
C
Explanation:
Real time exchange of messages or files with another online user
Why is OS important in every data processing system?
Please Answer Fast!
Answer:
Functions of an operating system. An operating system provides three essential capabilities: It offers a UI through a CLI or GUI; it launches and manages the application execution; and it identifies and exposes system hardware resources to those applications -- typically, through a standardized API.
Explanation:
