Answer:
The magnetic field of an atom, say H (one electron revolving around a proton) is composed of two separate contributions: an orbital magnetic moment and a spin magnetic moment. We get magnetic moments because of electromagnetic induction associated with each type of electron motion. The electron revolving around the proton with a certain angular momentum is related to the associated orbital magnetic moment (and, yes, we model it as a wire loop with current expressed in terms of the orbital velocity). This can be calculated using elementary mechanics. The spin magnetic moment is a little trickier because it is caused by the intrinsic spin of the electron which is a quantum phenomenon; therefore, this spin magnetic moment can only be calculated using quantum mechanics. In the end, we get a certain net magnetic moment associated with this motion of the electron in an atom. It is important to notice that this atom acts as a magnetic dipole (remember, as of yet, magnetic monopoles don't exist!).
If we take a bulk magnet like you might have on your fridge, it would be composed of atoms. Each atom operates as a magnetic dipole, but due to internal atomic structures, the atoms actually align themselves into separate magnetic domains, each with a net magnetic moment (caused my individually adding up those atomic dipole moments). In a common magnet (ferromagnet), these domains all point the same direction and stay that way, creating a permanent bulk magnetic dipole.
So in a way, there is no difference between the magnetic field of an atom and that of a magnet because one is simply a sum of the other, making both magnetic dipoles. Of course, here we see that there's nothing that fundamental about the magnetic force. In reality, the magnetic force is a relativistic effect caused by the movement of a charged particle, making electricity (i.e. charge) the underlying property at work here. Electromagnetic induction is really a shortcut to understand the magnetic force without worrying about relativistic mechanics. If we were to discover magnetic monopoles (i.e. "magnetic" charge), this would re-write a lot that we know about electromagnetism because we couldn't label all magnetic forces as by-products of moving electric charge
1) The percentage of oxygen in dry air is _______
A. 0.1
B. 1.0
C. 21
D. 79
2) The composition of the Earth’s earliest atmosphere was different to that of the present atmosphere. Which of these gases was present in large amounts in the Earth’s earliest atmosphere?
A. Oxygen
B. Carbon dioxide
C. Ammonia
D. Nitrogen
Answer:
1) The percentage of oxygen in dry air is _______
C. 21
2) The composition of the Earth’s earliest atmosphere was different to that of the present atmosphere. Which of these gases was present in large amounts in the Earth’s earliest atmosphere?
B. CARBON DIOXIDE
Hope it helps
have a nice day
Answer: The percentage of oxygen in dry air is . 21
Explanation: Ammonia gases was present in large amounts in the easth7s earliest atmosphere
Hope it will help you
Below are descriptions of different center voids of a solid fuel. Which design
shape will generate the most thrust?
A. A heart
OB. A circle
C. A triangle
O D. A tree with branches
B. A circle.
The center void shape that generates the most thrust in a solid fuel rocket is a circle.
What is Fuel?
Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.
This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.
Learn more about Fuel from the given link
https://brainly.com/question/10172005
#SPJ1
Answer:
Explanation:
D.
tree with branches
every action produces an equal and opposite -- ---------- when one object exterts a force on another object,the second object pushes back with the same amount of---------
someone knows the answer
True or false, Henry Moseley discovered through X-Ray crystallography the number of neutrons that were present
in the nucleus of atoms of every element.
Answer:
Im pretty sure its true
Explanation:
Answer:
answer is true .
Explanation:
this may help you
Balance the equation of. _C + _O2 -- _CO
Explanation:
2C +O2 = 2CO
this will be the answer
The structure shown is an example of what kind of molecule?
A) Ether
B) Alkene
C) Polymer
D) Monomer
Answer:
i think its C polymer hope it helps
Please a little help in this I will really appreciate it
Answer:
b is your answer...........
How many bonds can a carbon atom form?
O A. 1
B. 2
C. 4
O D. 3
How many ATOMS of boron are present in 3.61 grams of boron trifluoride ?
Answer:
To determine the number of atoms of Boron that are present within 3.61 grams of Boron Trifluoride, it would be best to convert the grams to moles of the compound and then after that use the Avogadro's number to determine the number of molecules and then use the 1 to 3 ratio to determine the total number of Boron atoms.
help sdfghrthfbfdve aahhhhhhhh
WHAT IS PHOTOSYNTHESIS??
Answer:
the process by which green plants and some other organisms use sunlight to synthesize nutrients from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a by-product.
Answer:
the process by which green plants and some other organisms use sunlight to synthesize nutrients from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a by-product.
Determine the enthalpy for the reaction A+B --> C If we know the following:
A+E --> C+D; delta H = -200 kJ
D+B --> E; delta H = -100 kJ
Explanation:
here is the answer to the question
Select the structure that corresponds
to the name:
decanoic acid
COOH
A.
B. CH3(CH2)7COOH
C. both
Answer:
b
Explanation:
Molecular formula of Decanoic Acid is C₁₀H₂₀O₂ therefore Option A is the right answer.
What is Decanoic Acid ?Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .
In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .
In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.
Hence option A is the right answer.
To know more about Decanoic Acid;
https://brainly.com/question/8729762
#SPJ2
Suppose that you chose sodium carbonate to precipitate the chromium ions from a solution of chromium (III) chloride. Write and balance the equation of this double-displacement reaction.
If the solution has a volume of 520 mL and the concentration of chromium (III) chloride is 0.224 M, how many grams of sodium carbonate should you add to the solution to precipitate out all the chromium ions?
Answer:
18.5g Na2CO3
Explanation:
Chromium (III) chloride, CrCl3, reacts with Na2CO3 as follows:
2CrCl3 + 3Na2CO3 → Cr2(CO3)3(s) + 6NaCl
Where 2 moles of CrCl3 react with 3 moles of Na2CO3 to produce 1 mole of Cr2(CO3)3 -The precipitate-
To solve this question we need to find the moles of CrCl3 added. With the chemical equation we can find the moles of Na2CO3 and its mass as follows:
Moles CrCl3:
520mL = 0.520L * (0.224mol/L) = 0.116 moles CrCl3
Moles Na2CO3:
0.116 moles CrCl3 * (3 mol Na2CO3 / 2mol CrCl3) = 0.175 moles Na2CO3
Mass Na2CO3 -Molar mass: 105.99g/mol-
0.175 moles Na2CO3 * (105.99g/mol) = 18.5g Na2CO3
Which best describes a swimming pool?
A.
It is a solute.
• B.
It IS
solvent.
C.
It is solution.
D.
It is a reactant.
•
E.
It is a product.
Answer:
Swimming pool is an example of solution
Explanation:
It has water (solvent) and dissolve ion (solute)
Answer:
it is a solution
Explanation:
the combining of (water and Cl and other pool chemicals) make it a solution.
What pollutants can contribute to acid precipitation and how are these pollutants generated?
Answer:
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
hope it helps
stay safe healthy and happy...Sulfur dioxide and nitrogen oxides can contribute to acid precipitation.
What are pollutants?A pollutant is a chemical or biological substance which harms water, air, or land quality.
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
Learn more about the pollutants here:
https://brainly.com/question/16101020
#SPJ2
EN LA MINA DE CHUQUICATAMA SE EXPLOTA DIFERENTES METALES COMO SER EL COBRE , AL ESTAR EN CONTACTO CON EL AIRE DICHO METAL SE LLEGA A OXIDAR FORMANDO DOS CLASES DE OXIDO¿CUALES SON ESTOS DOS OXIDOS?
Answer:
Los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).
Explanation:
El cobre posee dos estados de oxidación más comunes, los cuales son +1 y +2.
En contacto con aire el cobre se puede oxidar para dar lugar al óxido cuproso u óxido de cobre (I):
4Cu + O₂ → 2Cu₂O
Dicha oxidación también puede dar lugar a la formación del óxido cúprico u óxido de cobre (II):
2Cu + O₂ → 2CuO
La formación del óxido cúprico se favorece a temperaturas mayores a la del ambiente (por encima de los 300 °C).
Por lo tanto, los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).
Espero que te sea de utlidad!
The combination of ions most likely to produce a precipitate is Group of answer choices Mg2 and C2H3O2-. Fe3 and OH-. Li and PO43-. Pb2 and NO3-. NH4 and SO42-.
Answer:
The combination of ions most likely to produce a precipitate is a group of answer choices:
lead nitrate soluble in water
Mg2+ and C2H3O2-.
Fe3+ and OH-.
Li+ and PO43-.
Pb2+ and NO3-.
NH4+ and SO42-.
Explanation:
Among the given options,
magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.
The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.
[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.
if drop a watermelon from the top of one of the tower dorms at CSU, and it takes 3.34 seconds to hit the ground, calculate how tall the building is in meters and then convert into feet.
Answer:
179.5 feet
Explanation:
54.718 m converted to 179.5 feet.
please provide is matter about us pure all NCERT questions and answers
Answer:
I hope that's what u were lookong for :))
Explanation:
Can someone please do a True or false for these PLEASE
Answer:
true
false
false
true
false
true
true
false
false
true
true
Una muestra de S2 (g) se coloca en un recipiente rígido vacío a 800 K y ésta ejerce una presión inicial de 0,92 atm, luego se combina para formar S8 (g) mediante la reacción: S2 (g) ⇆ S8 (g) Una vez alcanzado el equilibrio, la presión parcial de S2 (g) ha disminuido a 0,18 atm. Calcule Kp para la reacción a esta temperatura
Answer:g
Explanation:
If a reaction occurs, what will be the products of the unbalanced reaction below?
Cu(s) + Ni(NO3)2(aq)
The Activity Series of Elements
A.
CuNi(NO3)4(s)
B.
Ni(s) + Cu(NO3)2(aq)
C.
No reaction will occur.
D.
CuNi(s) + NO2(g)
Cu(s) + Ni(NO3)2(aq) ⇒Ni(s) + Cu(NO3)2(aq)
The answer is option B.
What is electrochemical series?
Electrochemical or hobby series when the electrodes (metals and non-metals) in touch with their ions are organized on the idea of the values of their preferred discount potentials or standard oxidation potentials, the resulting series is called the electrochemical.
The electrochemical series is built up by means of arranging various redox equilibria so as of their fashionable electrode potentials (redox potentials). The maximum poor E° values are placed at the pinnacle of the electrochemical series, and the maximum wonderful at the lowest.
Learn more about chemical equation here:-https://brainly.com/question/11231920
#SPJ2
Oxygen is a diatomic element.why give reason.
Answer:
Diatomic molecules contain two atoms that are chemically bonded. If the two atoms are identical, as in, for example, the oxygen molecule (O2), they compose a homonuclear diatomic molecule, while if the atoms are different, as in the carbon monoxide molecule (CO), they make up…
Explanation:
yei hoo arko aaxaina ...
A 20.0 mL solution of NaOH is neutralized with 24.1 mL of 0.200 M HBr. What is the concentration of the original NaOH solution
Answer:
0.241 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
HBr + NaOH —> NaBr + H₂O
From the balanced equation above,
The mole ratio of acid, HBr (nₐ) = 1
The mole ratio of base, NaOH (n₆) = 1
Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:
Volume of base, NaOH (V₆) = 20 mL
Volume of acid, HBr (Vₐ) = 24.1 mL
Concentration of acid, HBr (Cₐ) = 0.2 M
Concentration of base, NaOH (C₆) =?
CₐVₐ / C₆V₆ = nₐ/n₆
0.2 × 24.1 / C₆ × 20 = 1/1
4.82 / C₆ × 20 = 1
Cross multiply
C₆ × 20 = 4.82
Divide both side by 20
C₆ = 4.82 / 20
C₆ = 0.241 M
Therefore, the concentration of the NaOH solution is 0.241 M
radical example ....
Methane is the main component of natural gas. Using the given reaction enthalpy, calculate the heat energy produced by the combustion of one kilogram of methane.
Answer: The heat energy produced is 53831.25KJ
Explanation:
METHANE is the main component of natural gas. It can undergo combustion reaction in air with a bright blue flame to produce carbondioxide and water. The heat of reaction (enthalpy) is negative because heat is absorbed during the chemical reaction. To calculate the heat energy produced by the combustion of one kilogram (1 kg) of methane the following steps are taken:
Molecular mass of methane =16 gm/mol.
So moles of 1 kg methane =
Given mass of methane ÷ molecular weight of methane
But the given mass = 1kg = 1000g
Therefore,
moles of 1000g methane = 1000÷16
= 62.5 moles
Hence, energy evolved = (moles of methane) × (heat of combustion)
Therefore,
heat energy produced= 62.5 × (-861.3kj)
= -53831.25kj
The heat energy produced by the combustion of one kilogram of methane is –53831.25 KJ
We'll begin by calculating the number of mole in 1 Kg of CH₄
Mass of CH₄ = 1 kg = 1000 g
Molar mass of CH₄ = 12 + (4×1) = 16 g/mol
Mole of CH₄ =?Mole = mass /molar mass
Mole of CH₄ = 1000 / 16
Mole = 62.5 moles Finally, we shall determine the heat energy produced from the reaction.CH₄ + 2O₂ —> CO₂ + 2H₂O ΔH = –861.3 KJ
From the balanced equation above,
1 mole of CH₄ reacted to produce –861.3 KJ.
Therefore,
62.5 moles of CH₄ will react to produce = 62.5 × –861.3 = –53831.25 KJ
Thus, –53831.25 KJ of heat energy is produced.
Complete Question is located in the attached photo
Learn more: https://brainly.com/question/13671340
How many grams of ammonia can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm?
Answer: The mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Explanation:
Given: Volume = 450 L
Temperature = 450 K
Pressure = 300 atm
The reaction equation is as follows.
[tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]
Here, 1 mole of nitrogen reacts to give 2 moles of ammonia.
From the given data, moles of nitrogen are calculated as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into the above formula as follows.
[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{300 atm \times 450 L}{0.0821 L atm/mol K \times 450 K}\\= \frac{135000}{36.945}\\= 3654.08 mol[/tex]
For 3654.08 moles of nitrogen, the moles of ammonia produced is as follows.
[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]
Therefore, mass of ammonia (molar mass = 17.03 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molarmass}\\7308.16 mol = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]
Thus, we can conclude that the mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.
Cotton plant is mainly harvested at flowering stage true false
A gas is put into a cosed container.
The container and the gas inside it are heated.
What will happen to the pressure inside the container?
Answer:
When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.
