Answer:
It is a Physical change, have a great day :)
Explanation:
A chemical change is a permanent change. A Physical change affects only physical properties i.e. shape, size, etc. ... Some examples of physical change are freezing of water, melting of wax, boiling of water, etc. A few examples of chemical change are digestion of food, burning of coal, rusting, etc.
Chemistry 1 - Types of Radioactive Decay
Answer:
Explanation:
The reaction expression is given as:
⁴⁰₁₈ Ar → X + ⁰₁B
To solve this problem, we must bear in mind that both mass number and atomic number must be conserved.
So;
For the mass number:
40 = A + 0
A = 40
For atomic number:
18 = Z + 1
Z = 18 - 1 = 17
An atom is identifiable by the atomic number. Since the atomic number of X is 17 then it is Cl, chlorine
- Is energy absorbed or released by a material during the phase change from a solid to a liquid?
A)Absorbed
B)Released
Answer:
A) Abosrbed
Explanation:
The change is endothermic, meaning the material absorbs energy when it changes its phase from a solid to a liqiud.
You have a particle of length 68 nm. What is this in meters? ( need help asap)
Answer:
B
Explanation:
how do you classify the society on the basis of economy write one characteristic of any two of them
Answer:
Explanation:
(1) The primary industry is mainly agriculture, which includes agricultural, forestry, animal husbandry and fishery components. Agriculture is the foundation of social economy. (2) The secondary industry, which mainly includes the industrial and construction industries.
PLEASEEEE HELPP
If 359 mL of a gas were contracted to only 269 mL, what would be the initial temperature of it if it measured 422 K after the change?
I NEED IT FAST!!
Answer:
T₁ = 563.19 K
Explanation:
Given data:
Initial volume = 359 mL
Final volume = 269 mL
Final temperature = 422 K
Initial temperature = ?
Solution:
The given problem will be solve through the Charles Law.
Charles Law:
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₁ = V₁T₂ / V₂
T₁ = 359 mL × 422 K / 269 mL
T₁ = 151498 mL.K / 269 mL
T₁ = 563.19 K
A sample of methane gas collcted t a pressure of 0.0884 atm and a temperature of 6.00 C is found to occupy a volume of 26.5 L. How many moles of CH4 gas are in the sample? ____ mol
Answer:
0.1mole
Explanation:
Given parameters:
Pressure = 0.0884atm
Temperature = 6°C = 6 + 273 = 279K
Volume occupied = 26.5L
Unknown:
Number of moles = ?
Solution:
To solve this problem, we are going to use the ideal gas equation:
PV = nRT
P is the pressure
V is the volume
n is the number of moles
R is the gas constant = 0.082atmLmol⁻¹k⁻¹
T is the temperature.
Insert the parameters and solve for n;
0.084 x 26.5 = n x 0.082 x 279
n = 0.1mole
Help Please with this
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
Which bond is most polar?
ОА СО
ов So
Осно
ODNO
Answer:
either first or second if not them try d but I'm pretty sure a also I'm sorry if I getbyou this wrong I dearly apologize
3. A property of acids is that they taste sour. A
property of bases is that they feel slippery. Would
you use either of these properties to identify an
unknown substance? Why or why not?
Explanation:
Touching or tasting these unknown substances could be lethal or cause severe burns to your skin, so it is advisable to use other methods to identify substances.
What can you determine about an element if you only know its group number on the periodic table?
A. The total number of protons and neutrons
B. The number of protons
C. The total number of electrons
D. The number of valance elctrons
Answer:
c
Explanation:
Observe the image of sodium. List the properties you see.
Answer:
It is soft and white. It has a low melting and boiling point, a good conductor electricity, and reacts with water. Furthermore, it is also highly reactive, malleable, and ductile.
Explanation:
Hope I helped!
Answer:
silvery-white and waxy
Explanation:
Properties means the observations you can make just by looking at it or the qualities that the object has.
So when I looked at the sodium I saw a silvery-white metal (sodium is a metal), that has this waxy appearance to it.
help me please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A wave in which particles of matter vibrate at right angles to the direction
the wave travels is called a(n) wave.
Enter the answer
Check It
Answer:
it will transverse wave I think it will help you
Sally is building a list of the types of matter that have energy. She includes liquids on her list because she can see that liquids flow. Is her list complete?
a. yes, her list with just liquids on it is complete
b. no, she should add only gases to her list
c. no, she should add only solids to her list
d. no, she should add gases and solids to her list
Answer:
I just looked up the types of matter energy has.
Explanation:
I believe the answer is D.
Sally's list of matter that have energy is not complete as all the types of matter have energy as all matter have mass , and mass and energy are related, so she should have added gases and solids to her list.
What is matter?Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of the same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.
Learn more about matter,here:
https://brainly.com/question/13556931
#SPJ2
4. Calculate the molar mass of Fe2(SO4)3. Then calculate the mass of iron(III) sulfate of 4.05X1023 formula units. Answer: __269g Fe2(SO4)3_
Answer:
399.88 [tex]\frac{4.05*10^{23} }{6.022*10^{23} }[/tex] =269
Explanation:
399.88 is the molar mass of iron(III) sulfate.
The mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
Mass from formula unitsTo calculate the molar mass of Fe2(SO4)3, we need to determine the atomic masses of the individual elements involved and multiply them by their respective subscripts:
Fe: 55.845 g/mol (atomic mass of iron)S: 32.06 g/mol (atomic mass of sulfur)O: 16.00 g/mol (atomic mass of oxygen)Fe2(SO4)3 consists of 2 iron atoms, 3 sulfur atoms, and 12 oxygen atoms:
Molar mass of Fe2(SO4)3 = (2 * 55.845) + (3 * 32.06) + (12 * 16.00) = 159.69 g/mol
To calculate the mass of 4.05 × 10^23 formula units of Fe2(SO4)3, we can use the molar mass:
Mass = (4.05 × 10^23) * (159.69 g/mol) = 6.48 × 10^25 g
Rounded to two decimal places, the mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
More on formula units can be found here: https://brainly.com/question/33740227
#SPJ6
What happened when you placed your bottle system
in cold water?
Answer:
The water level in the pipe went down.] ... [The hot water in the cup heated up the water particles inside the bottle. They began to move more. Greater motion (kinetic energy) pushed the particles farther apart, resulting in expansion.
what volume (in L) of ethane (C2H6) will be required to produce 42.5 L of carbon dioxide in the reaction below?
2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
Answer:
21.25
Explanation:
The discovery of protons and electrons most directly refuted or replaced the idea that
a. atoms contain a nucleus
b. the atom resembles plum pudding
c. the atom is electrically neutral
d. the atom is indivisible
Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical
Answer:
electrical --> light
Explanation:
Volcanic islands can form over hot spots. The Hawaiian Islands started forming over hot spots in the Pacific Ocean millions of years ago. What process causes the hot, solid rock to rise through the mantle at these locations?
Answer: Convection Currents
Explanation:
Due to the different temperature occurring at the upper and lower layers of the mantle, it causes heat transfer to occur. One of such heat transfer is the Convection currents which causes warmer, less dense rock material in the core to rise through the mantle. Also, the cooler rocks in the higher mantle move slowly towards the core.The movement caused by these Convection current in the Earth are called plate tectonics which are responsible for earthquakes and volcanoes.
How many atoms are in a molecule of RSq?
A breeder reactor is one type of nuclear reactor. In a breeder reactor, uranium-238 is transformed in a series of nuclear reactions into plutonium-239.
The plutonium-239 can undergo fission as shown in the equation below. The X represents a missing product in the equation.
Compare the amount of energy released by completely fissioned plutonium-239 to the amount of energy released by the complete combustion of the same amount of coal.
Answer:hope this help
Explanation:
the rate of effusion of co2 gas through a porous barrier is observed to be 9.31x 10^-4 mol/h. under the same conditions, the rate of effusion of N2 gas would be _______ mol/h
Answer:
[tex]1.167\times 10^{-3}\ \text{mol/h}[/tex]
Explanation:
[tex]R_1[/tex] = Rate of diffusion of [tex]CO_2[/tex] = [tex]9.31\times 10^{-4}\ \text{mol/h}[/tex]
[tex]R_2[/tex] = Rate of diffusion of [tex]N_2[/tex]
[tex]M_1[/tex] = Molar mass of [tex]CO_2[/tex] = 44.01 g/mol
[tex]M_2[/tex] = Molar mass of [tex]N_2[/tex] = 28.0134 g/mol
From Graham's law we have the relation
[tex]\dfrac{R_1}{R_2}=\sqrt{\dfrac{M_2}{M_1}}\\\Rightarrow R_2=\dfrac{R_1}{\sqrt{\dfrac{M_2}{M_1}}}\\\Rightarrow R_2=\dfrac{9.31\times 10^{-4}}{\sqrt{\dfrac{28.0134}{44.01}}}\\\Rightarrow R_2=1.167\times 10^{-3}\ \text{mol/h}[/tex]
The rate of effusion of the [tex]N_2[/tex] gas would be [tex]1.167\times 10^{-3}\ \text{mol/h}[/tex].
Apollo 11 made a ______ landing.
Answer:
Apollo 11 made a capsule landing
Explanation:
Answer: i don’t know what type of landing you mean
Explanation:
They did a lunar landing then reentry and then capsule landing.
What is the molar mass of carbon?
Can someone help
Me out pls if your good at chemistry
Please help me with this question
Thank you!
Answer:
B. 3+
Explanation:
When Fe²⁺ loses an electron, it becomes an Fe³⁺ ion.
The loss of an electron in an atom makes the atom becomes positively charged. Further losing electrons makes the atom more positive.
For the given ion;
Fe²⁺ if it loses an electron more, it becomes Fe³⁺.
The expression is given as:
Fe²⁺ → Fe³⁺ + e⁻
In an ionic compound, the negative and positive ions are held together by __________.
Answer:
the third one
Explanation:
what elements comprise the largest portion of Earth's atmosphere?
Answer:
Nitrogen and Oxygen make up 99% of the Earths atmosphere. Then Argon makes up the rest of the atmosphere.
