Answer:
The correct option is a) 10 mph, 0 mph.
Explanation:
1. The average speed (S) is a magnitude given by:
[tex] S = \frac{D}{T} [/tex]
Where:
D: is the total distance = 1 mi
T: is the total time = 6 min
[tex] S = \frac{D}{T} = \frac{1 mi}{6 min}*\frac{60 min}{1 h} = 10 mph [/tex]
Hence, the average speed is 10 mph.
2. The average velocity is a vector:
[tex] V = \frac{\Delta d}{\Delta t} = \frac{d_{f} - d_{i}}{t_{f} - t_{i}} [/tex]
Where:
[tex]d_{f}[/tex]: is the final distance
[tex]d_{i}[/tex]: is the initial distance
[tex]t_{f}[/tex]: is the final time
[tex]t_{i}[/tex]: is the initial time
Since Juanita ran one mile around her school track, the final position is the same that the initial position, so the magnitude of the average velocity is zero.
Therefore, the correct option is a) 10 mph, 0 mph.
I hope it helps you!
what force to be required to accelerate a car of mass 120 kg from 5 m/s to 25m/s in 2s
Answer:
[tex]f = m \frac{v1 - v2}{t} \\ = 120 \times \frac{25 - 5}{2} \\ = 120 \times \frac{20}{2} \\ = 120 \times 10 \\ = 1200N \\ thank \: you[/tex]
Calculate surface tension of an enlarged radius of 4cm to 6cm and amount of work necessary for enlargement was 1.5×10^-4 joules
Answer:
[tex]T=7.5*10^{-5}[/tex]
Explanation:
From the question we are told that:
Radius [tex]r=2cm[/tex]
Work done [tex]W=1.5×10^-4 joules[/tex]
Generally the equation for Work done is mathematically given by
[tex]W=T.dA[/tex]
Therefore
[tex]T=\frac{W}{dr}[/tex]
[tex]T=\frac{1.5*10^{-4}}{2}[/tex]
[tex]T=7.5*10^{-5}[/tex]
A Body is said to be in equilibrium when its:-
a) Acceleration is uniform
b) Speed is uniform
c) Speed and acceleration are uniform
d) Speed is uniform
I need the right answer. Please quick
Answer:
speed i uniform
Explanation:
if the speed is constant
Answer:
A
Explanation:
if it has a constant acceleration
Why does An apple, potato, and onion all taste the same if you eat them with your nose plugged
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions.
Which is the best analysis of Eli’s statement?
The question is incomplete, the complete question is;
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.
Answer:
It is incorrect because sodium phosphate is a compound that has a single composition
Explanation:
A compound is a neutral substance made up of two or more atoms which are chemically combined together.
Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.
Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.
An object 2cm high is placed 3cm in front of a concave lens of focal length 2cm, find the magnification?
Answer:
0.4
Explanation:
A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.
From the lens formula;
1/f = 1/u+ 1/v
- 1/2 = 1/3 - 1/v
1/v = 1/3 + 1/2
v= 6/5
v= 1.2 cm
Magnification = image distance/object distance
Magnification = 1.2cm/3cm
Magnification = 0.4
A 90 kg astronaut Travis is stranded in space at a point 12 m from his spaceship. In order to get back to his ship, Travis throws a 0.50 kg piece of equipment so that it moves at a speed of 4 m/ s directly away from the spaceship towards the left . How long will it take him to reach the ship? *hint find his speed after the collision and consider it a constant speed all the way back to his spaceship*
Answer:
Explanation:
This is a recoil problem, which is just another application of the Law of Momentum Conservation. The equation for us is:
[tex][m_av_a+m_ev_e]_b=[m_av_a+m_ev_e]_a[/tex] which, in words, is
The momentum of the astronaut plus the momentum of the piece of equipment before the equipment is thrown has to be equal to the momentum of all that same stuff after the equipment is thrown. Filling in:
[tex][(90.0)(0)+(.50)(0)]_b=[(90.0)(v)+(.50)(-4.0)]_a[/tex]
Obviously, on the left side of the equation, nothing is moving so the whole left side equals 0. Doing the math on the right and paying specific attention to the sig fig's here (notice, I added a 0 after the 4 in the velocity value so our sig fig's are 2 instead of just 1. 1 is useless in most applications).
0 = 90.0v - 2.0 and
2.0 = 90.0v so
v = .022 m/s This is the rate at which he is moving TOWARDS the ship (negative was moving away from the ship, as indicated by the - in the problem). Now we can use the d = rt equation to find out how long this process will take him if he wants to reach his ship before he dies.
12 = .022t and
t = 550 seconds, which is the same thing as 9.2 minutes
After landing the aeroplane's momentum becomes zero. Explain how
the law of conservation holds here.
Answer:
The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.
When the spacecraft is at the halfway point, how does the strength of the gravitional force on the spaceprobe by Earth compre with the strength
Solution :
When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.
The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.
The boiling point of a substance is _72 degree Celsius. This temperature will be equivalent to Kelvin scale is-------.
Answer:
345 K
Explanation:
Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.
Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).
Given the following data;
Boiling point = 72°CTo convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;
Kelvin = 273 + °C
Substituting into the formula, we have;
Kelvin = 273 + 72
Kelvin = 345 K
Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.
Look at the distance-time graph below. It shows Angela's journey as she walks to the end of the road and back. The end of the road is 40 m away. After how many seconds did she arrive back where she started?
Answer:
Explanation:
If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.
Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.
How long did Angela take?The end of the road is 40m and coming back is also 40 m. The total distance is:
= 40 + 40
= 80m
The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.
Find out more uses of distance-time graphs at https://brainly.com/question/13877898.
#SPJ6
The 75.0 kg hero of a movie is pulled upward at a constant velocity by a rope. What is the tension on the rope?
Answer:
750 N
Explanation:
the tension on the rope is the weight of the hero
TRUE OR FALSE. when an object changed direction without changing its speed, it is not accelerating
Answer:
True.
Explanation:
The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... But the fact is that an accelerating object is an object that is changing its velocity.
Please answer will mark brainleist
[tex]option \: (a) \: is \: correct.[/tex]
Explanation:
Yes, I was wrong. Pressure increases as the area decreases.
As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.
As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.
Answer:
Option number B
Explanation:
The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases
When the E string of a guitar (frequency 330 Hz) is plucked, the sound intensity decreases by a factor of 2 after 4 s. Determine
Answer:
[tex]Q=50.3[/tex]
Explanation:
From the question we are told that:
Frequency [tex]F=330Hz[/tex]
Sound intensity drop [tex]I_d=2[/tex]
Time [tex]T=4s[/tex]
Therefore
Sound intensity Ratio
[tex]\frac{I}{I_x}=\frac{1}{2}[/tex]
Generally the equation for Sound intensity is mathematically given by
[tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]
[tex]\frac{1}{2}=e^{-4\ \=t}[/tex]
[tex]\=t =5.8s[/tex]
Generally the equation for Quality Factor is mathematically given by
[tex]Q=2 \pi\frac{E}{\triangle E}[/tex]
[tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]
[tex]Q=50.3[/tex]
[tex]what \: is \: mirror \: {?}[/tex]
How much energy has 4×10^10m^3 of water collected in a reservoir at a hight of 100 m from the power house ?What kind of energy is that?
Answer:
PE = 3.92x10^16J
potential energy
Explanation:
PE = m*g*h
mass of water = 1000kg/m³
(4*10^10m³)*1000kg = 4*10^13kg
PE = (4*10^13kg)*(9.81m/s²)*(100m)
PE = 3.92x10^16J
in a chemical equation, where do the products appear
Answer:
products would appear after the raw materials
Explanation:
raw material + raw material = product (anything deriving from combining two materials)
Which component of weight is cause for S.H.M of bob simple pendulum
Explanation:
The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.
hope it helps you
Answer all these questions
What type of waves can only travel through a medium?
What is pitch?
What is the relationship between amplitude and volume?
How does the type of medium affect a sound wave?
Describe the relationship between frequency and wavelength.
Answer:
mechanical waves,
.
the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.
.
If the amplitude increases the volume increases and vice versa.
.
The type of medium affects a sound wave as sound travels with the help of the vibration in particles.
.
The higher the frequency, the shorter the wavelength.
Explanation:
Answer:
1 . Soundwave
2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz
3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound
4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves
1) Convert the following:
I) 65 kg into g
ii) 87570 seconds into hour
iii) 7.5 km into m
Answer:
65000g
24.325 hrs
7500m
Answer:
I) 65000 g II)24.325 hours III)7500 m
Explanation:
I) 1 kg = 1000 g
65 kg = 65 * 1000 g = 65000 g
II) 1 hour = 3600 seconds
1 second = 1/3600 hours
87570 seconds = 87570 * 1/3600 hours =24.325 hours
III) 1 km = 1000 m
7.5 km = 7.5 * 1000 m = 7500 m
You are accelerating upwards in an elevator when the net force on you increases. What happens to the acceleration
Answer:
the acceleration of the elevator is increasing
Explanation:
For this exercise we propose the solution using Newton's second law
F -W = m a
F = m (g + a)
If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.
5- Clasifica los siguientes cambios de la materia, anotando delante de cada uno cambio físico (F) o cambio químico (Q): • Disolver azúcar en agua • Freir una chuleta • Arrugar un papel • El proceso de la digestión • Secar la ropa al sol • Congelar una paleta de agua • Hacer un avión de papel • Oxidación del cobre • Romper un lápiz • Prender fuegos artificiales • Excavar un hoyo • Quemar basura
Answer:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
Explanation:
A continuación, veremos que representa cada caso:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
The force that the left team pulls with is 1000 N. If the right team's total mass is 300 kg and they accelerate by 1.2 m/s2, what is the force of resistance on the right team
Answer:
the force of resistance on the right team is 360 N
Explanation:
Given;
force of the left team, = 1000 N
total mass of the right team, m = 300 kg
acceleration of the right team, a = 1.2 m/s²
The force of resistance of the right team is calculated as;
Force = mass x acceleration
Force, F = 300 x 1.2
Force = 360 N
Therefore, the force of resistance on the right team is 360 N
a body is moving along a circular path 'r'. what will be the distance and displacement of the body when it completed half a revolution?
After half of a revolution ...
==> Distance = π•r
==> Displacement = 2•r
A box has a mass of 4kg and surface area 4m². Calculate the
pressure exerted by the box on the floor.
Answer:
10 pa
Explanation:
4kg* 10 (or 9.8m/s2) = 40
40N /4m2 =10
a ball is thrown straight up into the air while the ball is traveleling upwards what are the magnitue and direction
Answer: hi your question is incomplete attached below is the complete question
answer :
magnitude of acceleration : | a | = g = 9.81 m/s^2
direction : a = - g j
Explanation:
Neglecting Air resistance
magnitude of acceleration :
| a | = g = 9.81 m/s^2
Direction of acceleration
a = - g j ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )
Question 23 of 23
Suppose a current flows through a copper wire. Which two things occur?
O A. The field is parallel to the direction of flow of the current.
B. An electric field forms around the wire.
OC. A magnetic field forms around the wire.
U
D. The field is perpendicular to the direction of flow of the current.
SUBM
Answer:
The field is parallel to the direction of flow of the current.
In the hydraulic system depicted, the cylinder on the left has a diameter of 2 inches and the cylinder on the right has a diameter of 6 inches. If 100 lbs of force was applied to the cylinder on the left, what force would be exerted on the cylinder on the right
Answer:
F2 = 900 lbs
Explanation:
From pascal principle;
F1/A1 = F2/A2
Force on cylinder at left; F1 = 100 lbs
Diameter of cylinder at left; d1 = 2 inches
Diameter of cylinder at right; d2 = 6 inches
Formula for area of top of cylinder = πr²
Thus;
Area of top of left cylinder; A = π × 2² = 4π
Area of top of right cylinder; A = π × 6² = 36π
Thus;
100/4π = F2/36π
F2 = (36π × 100)/4π
F2 = 900 lbs
What does the sun use for nuclear fusion?
Answer:
The sun uses hydrogen for nuclear fusion.
Answer:
Hydrogen
Explanation:
