Answer:
1-B, 2-A, 3-D, 4-C
Explanation:
1. The force exerted is, F = 35 N
Distance the box is moved, d = 4 m
So the amount of work done is, W = F x d
= 35 x 4
= 140 Newton-meters
2. Work done, W = 420 Nm
Time, T = 3 seconds
Therefore, the power required is,
[tex]$P=\frac{W}{T}$[/tex]
[tex]$P=\frac{420}{3}$[/tex]
= 140 joules
3. The force exerted is, F = 1.2 N
Distance the box is moved, d = 5 m
So the amount of work done is, W = F x d
= 1.2 x 5
= 6 Newton-meters
4. Work done, W = 120 Nm
Time, T = 20 seconds
Therefore, the power required is,
[tex]$P=\frac{W}{T}$[/tex]
[tex]$P=\frac{120}{20}$[/tex]
= 6 joules
What happens to energy when it is consumed?
Answer:
It converts to other energy
Which type of map best shows the three dimensions of Earth’s surface?
Answer:
please give me brainlist and follow
Explanation:
topographic map
A topographic map shows a three-dimensional representation of a flat surface. It has contour lines joining points of equal elevation; the closer the lines are the steeper the elevation is.
A 2.5m long steel piano wire has a diameter of 0.5cm how great is the tention in the wire if it stretches by 0.45cm when tightened taking the young's modulus to be 2.0×10^11 N/m^2
Answer: Their u go i found it their was about 3 pages i did not no what pages u had to do.
Explanation:
Milk is a very weak acid. What might its pH value be ?
Answer:
pH value is between 6.5 and 6.8
Explanation:
Explanation:
Milk fresh from the cow typically has a pH between 6.5 and 6.7. The pH of milk changes over
Which describes the motion in a convection current? horizontal motion only vertical motion only linear motion circular motion
Answer:
circular motion
Explanation:
Circular motion can be regarded as
movement of particular object along the circumference in a circle. It is
rotation of particular object along a circular path. Circular motion could be
uniform, along with constant angular rate of rotation as well as constant speed. It could also be non-uniform along with changing rate of rotation. The acceleration that is been experienced when one is in uniform circular motion is called"Centripetal acceleration"
Convection currents is type of current that takes place after a reservoir of fluid has been heated at the bottom, then cool at the top.the fluid expand as a result of Heat , then density decreases, the plates on top of them is been carried as a result of circular motion of the convection
A convention current is a circular movement which is set up due to temperature difference between two layers of a fluid.
What is a convection current?A convention current is a movement which is set up due to temperature difference between two fluids.
Convection currents are set up in liquids and gases.
Hotter and less dense fluids move upwards while colder and denser fluids move downwards.
Therefore, convection currents involve circular motion.
Learn more about convection currents at: https://brainly.com/question/25957304
what are the uses of convex lens
Answer:A convex lens is employed in microscopes and magnifying glasses to converge all incoming light rays to a particular point. ...
The convex lens is used in cameras. ...
A convex lens is used for the correction of hyperopia. ...
The converging lens is used in the projector as well.
Name three (3) organelles that are found in plant cells that are not commonly found in animal cells?
Answer:
cell wall, chloroplasts, plastids
A Navy vessel is traveling due north during wartime. A torpedo has been launched by an enemy directly toward the stern (rear) of the vessel. Can the vessel outrun the torpedo if both continue in a straight line due north?
A) Yes, the Navy vessel is faster
B) No, the Navy vessel is slower
C) Maybe, since both travel at the same speed
D) Maybe, based on the temperature of the water
Answer:
The correct option is;
B) No, the Navy vessel is slower
Explanation:
The speed of some torpedoes can be as high as 370 km/h. The average speed of a fast Navy vessel is approximately 110 km/h
Therefore, the torpedoes travel approximately 3 times as fast as the (slower) Navy vessel, such that the torpedo covers three times the distance of the Navy vessel in the same time and therefore, if the Navy vessel and the torpedo continue in a straight line (in the same direction) due north the vessel can not outrun the torpedo
Therefore, no the Navy vessel travels slower than a torpedo.
All waves change speed when they enter a new medium, but they don't always bend. When does bending occur?
A squash ball with an initial velocity of 19.21 m/s [W] is hit by a squash racket, changing its velocity to 40.22 m/s [E] in 0.312 s. What is the squash ball’s average acceleration?
Acceleration = (change in velocity) / (time for the change)
Change in velocity = 59.43 m/s East
Time for the change = 0.312 s
Acceleration = 190.5 m/s^2 East
The Doppler Effect is caused by which of the following?
Select all that apply…
A - motion of the source
B - the type of wave
C - original frequency of the source
D - motion of the observer
E - type of medium the wave is in
Answer:
the type of wave
Explanation:
Description: Doppler Effect works on both light and sound objects. For instance, when a sound object moves towards you, the frequency of the sound waves increases, leading to a higher pitch. Conversely, if it moves away from you, the frequency of the sound waves decreases and the pitch comes down.
Give 1 real life example of a scenario that takes advantage of the inverse relationship between force and time when impulse is constant. Describe how it is an example of impulse and how force and time are involved.
Answer:
On real life example of a scenario that takes advantage of the inverse relationship between force and time when impulse is constant is when making a serve with a lawn tennis racket
How It is an example of impulse is that when a serve is made by moving the bat slowly, the lawn tennis player uses less force and the ball is in contact with the string for longer a period
When however, the lawn tennis player moves the racket faster, with the strings of the racket highly tensioned he uses more force and the ball also spends less time on the racket to produce the same momentum
Explanation:
The impulse of a force, ΔP is given by the following formula;
ΔP = F × Δt
Where ΔP is constant, we have;
F ∝ 1/Δt
Therefore, for the same impulse, when the force is increased, the time of contact is decreases and vice versa.
Please Help Me!!!
Water is a colorless and odorless liquid. It can exist in solid, liquid, and gas states. It boils at 100 degrees C and melts at 0 degrees C.
Which option best describes this information?
A.
These are the physical properties of water.
B.
These are the chemical properties of water.
C.
These are the physical changes water undergoes.
D.
These are the chemical changes water undergoes.
E.
These are the molecular changes water undergoes.
Answer:
There are the molecular changes water undergoes
Why isn't nuclear fusion used to generate electric energy in power plants?
A.
It requires extremely high pressure.
B.
It uses a very rare radioactive isotope.
C.
It releases less energy per gram than uranium does.
D.
It requires converting matter into energy.
Answer:
A) It requires extremely high pressure.
Explanation:
The reasons why we haven't been able to harness power from fusion is that its energy requirements are unbelievably, terribly high.
The correct statement is: "nuclear fusion requires extremely high pressure."
To find the correct statement among all the options, we need to know about nuclear fusion.
What is nuclear fusion?
Nuclear fusion is a nuclear reaction in which nuclei are fused to form another nucleus and releases some energy.How much pressure is required for nuclear fusion?
In a nuclear fusion reaction, 250 billions atmospheric pressure is required. One atmospheric pressure is 101325 pascals.Creating this much pressure is very much difficult.How much energy is released during nuclear fusion?
In nuclear fusion, 17.6 MeV energy is released in a single reaction. Since, two hydrogen atoms are participated, so energy released per nucleon is 8.8 MeV.What is the comparison of energy that released in nuclear fusion and fission?
In a nuclear fission reaction, 200 MeV energy is released in a single reaction and energy per nucleon is less than 1 MeV as an uranium has 238 nucleons.So, nuclear fusion reaction releases more energy as compared to that of nuclear fission.How does we get energy in the nuclear fusion reaction?
In a nuclear fusion reaction, two hydrogen atoms are fused to form a helium atom and the energy is released due the binding energy differences of hydrogen and helium atoms.Thus, we conclude that option (A) is correct.
Learn more about nuclear fusion here:
https://brainly.com/question/17870368
#SPJ2
A 20 g block of ice is cooled to −65 ◦C. It
is added to 570 g of water in an 76 g copper
calorimeter at a temperature of 26◦C.
Find the final temperature. The specific
heat of copper is 387 J/kg ·
◦C and of ice is
2090 J/kg ·
◦C . The latent heat of fusion of
water is 3.33 × 10^5
J/kg and its specific heat
is 4186 J/kg ·
◦C .
Answer in units of ◦C.
Answer:
The final temperature is approximately 23.55°C
Explanation:
The given parameters are;
The mass of the ice block, m₁ = 20 g
The initial temperature of the block, T₁ = -65°C
The mass of the water to which the block is added, m₂ = 570 g
The mass of the copper container containing the water, m₃ = 76 g
The initial temperature of the water and the copper, T₂ = 26°C
The specific heat capacity of copper, c₃ = 387 J/(kg·°C)
The specific heat capacity of ice, c₄ = 2,090 J/(kg·°C)
The latent heat of fusion of ice, l = 3.33 × 10⁵ J/kg
The specific heat capacity of water, c₁ = 4,186 J/(kg·°C)
We have;
ΔQ = m₁·c₁·ΔT + m₁·l = m₂·c₂·ΔT + m₃·c₃·ΔT
Therefore, we get;
20 × 2,090 × -65 + 20 × 3.33 × 10⁵ + 20 × T × 4,186 = 570 × 4,186 × (26 - T) + 76 × 387 × (26 - T)
Using a graphing calculator, we get;
83720·T + 3943000 = 62801232 - 2415432·T
The final temperature, T ≈ 23.55 °C
Activity
Launch the Wave on a String simulation again to investigate the relationship between amplitude and damping force.
To begin:
• Select Oscillate and No End.
• Set Amplitude to 1.00 cm and Frequency to 1.00 Hz,
• Set Damping to None and Tension to low.
• Select Rulers to measure the amplitude of the waves.
For each measurement described below, pause the wave when the oscillator arm is at or just past its maximum
Part A
You can see that each wave has a crest and a trough. Measure the amplitude at the first crest to the center of the ball and record your reading in
the table below. Record amplitude measurements for every subsequent trough and crest, as identified in the table.
Finally, vary the Damping as indicated in the table and record your amplitude readings again for each different damping value to complete the
table. Each division is 5 units of dampening force, where None = 0, and Lots = 50.
illustration
Amplitude of Wave 1 E Amplitude of Wave 2 Amplitude of Wave 3
(crest)
(crest)
(crest)
Blackie, a cat whose mass is 6-kg, is napping on top of the refrigerator when he rolls over and fall. Blackie has a KE of 90-J just before he lands on his feet on the floor.
How tall is the refrigerator?
To answer this question, you need to understand the law of conservation of energy. Essentially, the law states that energy cannot be created or destroyed; it is always conserved.
Knowing this law, how can we answer this question? Well, let's look at what the question tells us. We know that Blackie was initially at the top of a refrigerator before rolling over and falling to the ground. At ground level, he only has Kinetic energy when he lands. Since we know that he started at the top of the fridge, we know that Blackie started off with potential gravitational energy.
That would make sense, right? Written out as an equation, it'd be:
[tex]U_{g}[/tex] = [tex]K_{E}[/tex]
This follows the law of conservation of energy, as all the potential gravitational energy is converted into Kinetic energy.
Now, we know what energies are converted. What can we do with it? Recall the equation of potential gravitational energy:
[tex]U_{g}[/tex] = [tex]F_{g}[/tex]∆H
[tex]U_{g}[/tex] = mg∆H
Do you see it now? ∆H is the distance that Blackie falls, and since Blackie jumps from the fridge to the ground, ∆H must be the height of the fridge!
Let's start solving for ∆H:
[tex]U_{g}[/tex] = [tex]K_{E}[/tex]
Substitute potential gravitational energy with our equation:
mg∆H = [tex]K_{E}[/tex]
We were given the value of Kinetic Energy:
mg∆H = 90
Isolate ∆H by dividing both sides by mg:
∆H = [tex]\frac{90}{mg}[/tex]
Input values for 'm' and 'g' (m is the mass of Blackie and g is Earth's acceleration)
∆H = [tex]\frac{90}{6*9.80}[/tex]
∆H = [tex]\frac{90}{58.8}[/tex]
∆H = 1.53
The refrigerator is 1.53 meters tall.
And that's it! Let me know if you need me to explain anything I did here.
- breezyツ
will give brainlist.
Answer:
Displacement (km)
Explanation:
The y axis is the vertical axis pointing up and down. This is labeled as the the displacement (km) in the graph.
Define the types of friction and give FOUR examples of each
Static Friction
Rolling Friction
Sliding Friction
Fluid Friction
A ball with a volume of 1.0 L is filled with a gas at 5 atmospheres (atm). If the volume is reduced to 0.75 L without a change in temperature, what would be the pressure of the balloon?
Answer:
P2 = 6.67 atm
Explanation:
Given the following data;
Initial volume = 1 Liters
Initial pressure = 5 atm
Final volume = 0.75 Liters
To find the final pressure P2, we would use Boyles' law.
Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyles law is given by;
[tex] PV = K[/tex]
[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]
Substituting into the equation, we have;
[tex] 5 * 1 = P_{2} * 0.75 [/tex]
[tex] 5 = 0.75_{2} [/tex]
[tex] P_{2} = \frac {5}{0.75}[/tex]
[tex] P_{2} = 6.67[/tex]
P2 = 6.67 atm
Therefore, the new pressure is 6.67 atm.
Why did the lemon battery work and how many volts does one produce?
O The juice of the lemon is an acid and the acid caused 2 volts.
O The juice of the lemon is an electrolytic solution allowing electrons to flow and created around 5 V.
O The juice of the lemon is an electrolytic solution allowing electrons to flow and created around 1.5 V.
O The juice of the lemon is an acid and the acid caused 1 volt.
Answer:
the third one
Explanation:
A 5 kg ball is sitting on top of a hill. It has a Potential Energy of 6000J. What is the height of the ball?
Explanation:
mass=5 kg
potential energy=6000j
height=?
Now
potential energy =m.g.h
or 6000=5*9.8*h
or 6000=49h
or 6000÷49=h
or h= 122.45m
What are examples of changes in people, animals, or objects that would help you make a claim about their age? NO LINKS OR YOURE GETTING REPORTED. Thanks
It’s Earth Science
Answer:
An example of changes in people based on their age, are mood changes,playfulness and as of objects you can say old or broken, animals can use the same reference as humans, the more mature you are can suggest your older, such as the more worn down your are based on a object
Two resistors, 2.50 Ω and 4.95 Ω, are wired in series to a 12.00 V battery. What is the equivalent resistance of the circuit?
Answer:
7.45 Ω
Explanation:
From the question given above, the following data were obtained:
Resistor 1 (R₁) = 2.50 Ω
Resistor 2 (R₂) = 4.95 Ω
Voltage (V) = 12 V
Equivalent Resistance (Rₑq) =?
Since the resistors are in series arrangement, the equivalent resistance can be obtained as follow:
Rₑq = R₁ + R₂
Rₑq = 2.5 + 4.95
Rₑq = 7.45 Ω
Therefore, the equivalent resistance is 7.45 Ω
how slow would a 60,000 kg freight car have to roll to have the same momentum as an 80 kg person running 6.5 m/s
(8 and 2/3) millimeters per second.
That's about 0.02 mile per hour.
What is the equivalent of 0° C in Kelvin?
Help will give brainiest
Answer:
273.15 dat is the answer im pretty sure
Waves that move through space are called
Answer:
Electromagnetic waves are waves that can travel through matter or through empty space
Which of the following scenarios would result in an increase of kinetic
energy?*
A) An object at rest at a height of 10 meters
B) A car accelerating from 10 m/s to 20 m/s
C) A car coming to a stop
Answer:
B) A car accelerating from 10 m/s to 20 m/s
Explanation:
I explained this yesterday.
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 23pts-
Answer:
B is the answer!!
Explanation:
Light waves are
A.rotating waves.
B.longitudinal waves.
C.circular waves.
D.transverse waves
SHOCKING
Explanation:
Answer:
D i promises.
Explanation:
light waves can go 2 direction
