Answer:
waves, energy is transferred through vibrations of electric and magnetic fields.
Explanation:
In sound waves, energy is transferred through vibration of air particles or particles of a solid through which the sound travels. In water waves, energy is transferred through the vibration of the water particles
How many grams of Al2O3 is extracted from 250. g of FeO?
Answer:
[tex]m_{Al_2O_3}=118.27gAl_2O_3[/tex]
Explanation:
Hello there!
In this case, if we consider the following chemical reaction, whereby Al2O3 is produced from Al and FeO:
[tex]3FeO+2Al\rightarrow 3Fe+Al_2O_3[/tex]
Thus, since there is 3:1 mole ratio of FeO to Al2O3, it turns out feasible for us to use their molar masses, 71.844 g/mol and 101.96 g/mol respectively, to obtain the grams of the latter as follows:
[tex]m_{Al_2O_3}=250.gFeO*\frac{1molFeO}{71.844gFeO}*\frac{1molAl_2O_3}{3molFeO} *\frac{101.96gAl_2O_3}{1molAl_2O_3}\\\\m_{Al_2O_3}=118.27gAl_2O_3[/tex]
Regards!
A bottle containing a reagent was weighed to show a mass of 25.3658 g. Some material was carefully transferred to a reaction flask, and the bottle reweighed to show a mass of 22.1287 g. What mass of the material was transferred to the flask
Answer:
3.2371 g
Explanation:
Step 1: Given data
Initial mass of the bottle and the reagent: 25.3658 gFinal mass of the bottle and the reagent: 22.1287 gStep 2: Calculate the mass of the material was transferred to the flask
Since the bottle is unaltered, the mass of the material transferred to the flask is equal to the difference between the initial mass of the system and the final mass of the system.
m = 25.3658 g - 22.1287 g = 3.2371 g
As a result of the particles in a gas being in constant motion, gas has a _______.
variable volume
variable Pressure
variable Shape
variable mass
Answer:
i think it's variable pressure
if not soo advance sorry :)
describe what it would be like to be an atom
Explanation:
An atom consists of two regions. The first is the tiny atomic nucleus, which is in the center of the atom and contains positively charged particles called protons and neutral, uncharged, particles called neutrons. ... Most atoms contain all three of these types of subatomic particles—protons, electrons, and neutrons.
2KClO3 (s)⇄2KCl (s)+ 3O2 (aq) equilibrium constant
Answer: The equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]
Explanation:
The equilibrium constant is defined as the ratio of the concentration of the products to the concentration of reactants each raised to the power of their stoichiometric coefficients.
The concentration of all the solids and liquids are considered to be 1 in the expression of equilibrium constant
For the given chemical equation:
[tex]2KClO_3(s)\rightleftharpoons 2KCl(s)+3O_2(aq)[/tex]
The expression of equilibrium constant follows:
[tex]K_{eq}=[O_2]^3[/tex]
Hence, the equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]
An aqueous sucrose (C12H22O11) solution must be created for an experiment. If 100.00 mL of 0.200 M solution is needed, what amount of sucrose (in grams) must be weighed out
Answer:
6.85 g
Explanation:
Step 1: Given data
Molar concentration of the solution: 0.200 M (0.200 mol/L)Volume of the solution: 100.00 mL (0.10000 L)Step 2: Calculate the moles of sucrose (solute) required
Molarity is equal to the moles of solute divided by the liters of solution.
M = moles of solute / liters of solution
moles of solute = M × liters of solution
moles of solute = 0.200 mol/L × 0.10000 L = 0.0200 mol
Step 3: Calculate the mass corresponding to 0.0200 moles of sucrose
The molar mass of sucrose is 342.3 g/mol.
0.0200 mol × 342.3 g/mol = 6.85 g
The amount of sucrose (in grams) must be weighed out for the given reaction is 6.846g.
How we calculate mass from moles?Mass of any substance will be calculated by using the moles as:
n = W/M, where
W = required mass
M = molar mass
Given that, molarity of sucrose = 0.2 M
Volume of solution = 100mL = 0.1 L
Relation between moles and molarity is represented as:
M = n/V
On putting values on the above equation we get,
n = (0.2)(0.1) = 0.02 moles
We know that molar mass of sucrose (C₁₂H₂₂O₁₁) = 342.3 g/mole
Now we calculate the required mass by putting values on the first equation as:
W = (0.02)(342.3) = 6.846g
Hence, the required mass of sucrose is 6.846g.
To know more about moles, visit the below link:
https://brainly.com/question/24639749
In the clinical laboratory, testing to identify specific porphyrins is performed using Group of answer choices Fluorometric emission scanning Chemical derivatization and spectrophotometry Liquid chromatography with fluorescent detection Thin layer chromatography
Answer:
Fluorometric emission scanning.
Explanation:
Fluorometric emission scanning is used to detect the presence of porphyrins. There are various types of porphyrins and they can be tested in a lab with either, urine or blood sample testing.
How long does it take for water to boil?
Answer:
around 5-10 minutes it may take but the actual answer is when the temperature of water reaches 100°Celsius
Answer:
How Long Does It Take to Boil Water? To boil 1 liter of water (4 cups), it takes about 8 to 10 minutes in a pot on the stove with high heat and the lid on. 1 liter of water boils in an electric kettle in about 4 to 5 minutes. 1 liter of water boils in a microwave in about 3 to 4 minutes
have a great day
#brainlesthow many grams of O2 are produced when 0.065 mol of water decompose ?
Answer: The answer is 0.52 grams.
2H2O->2H2+O2
So, we can say that,
2 moles of water= 16 gm of O2
Then
0.065 moles of water=16/2*0.065 gm
=0.52 gm
Hope you understood:)
At STP, which gaseous sample has the same number
of molecules as 5.0 liters of O2 (g)?
A) 6.0 L of F2 (g)
B) 4.5 L of O2 (g)
C) 3.0 L of H2 (g)
D) 5.0 L of Cl2 (9)
12 + NaF --> Nal + F2 What is the coefficient of Nal when this equation is
balanced? *
Answer:
Explanation:
NaL
Difluorine - F2
Molar Mass Bond Polarity F₂ Fluorine Gas Fluorine
Products
Sodium Fluoride - NaF
Molar Mass Bond Polarity Oxidation State Floridine Sodium Monofluoride Naf
L2
What is the mass of NaCl required to make 150 grams of a 12% solution of NaCl in water? (5 points)
a
13 grams
b
18 grams
c
22 grams
d
32 grams
Answer:
18 grams
Explanation:
Mass of solution = 150 g
Percent concentration = 12%
Percent concentration = mass of solute/mass of solution × 100
Let the mass of solute be x
12= x/150 × 100
12= 100x/150
12 × 150 =100x
x= 12 × 150/100
x = 18 g
Answer:
18
Explanation:
Mass of solution = 150 g
Percent concentration = 12%
Percent concentration = mass of solute/mass of solution × 100
Let the mass of solute be x
12= x/150 × 100
12= 100x/150
12 × 150 =100x
x= 12 × 150/100
x = 18 g
Calculate the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the following balanced chemical equation: 2 Al + 6 HCl → 2 AlCl3 + 3 H2
Answer: The mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.
Explanation:
The given balanced reaction equation is as follows.
[tex]2Al + 6HCl \rightarrow 2AlCl_{3} + 3H_{2}[/tex]
Here, the mole ration of Al and hydrogen produced is 2 : 3
As mass of aluminum is given as 26.98 g. So, moles of aluminum (molar mass = 26.98 g/mol) is as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{26.98 g}{26.98 g/mol}\\= 1 mol[/tex]
So, when 1 mole of Al reacted then 1.5 moles of hydrogen is produced as per the given mole ratio.
Therefore, mass of hydrogen formed is calculated as follows.
[tex]mass = moles \times molar mass\\= 1.5 mol \times 2.02 g/mol\\= 3.03 g[/tex]
Thus, we can conclude that the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.
What type of reaction is rusting?
O A. Decomposition
O B. Double-displacement
O C. Single-displacement
OD. Oxidation-reduction
Use the following key to classify each of the elements below in its elemental form:
A. Discrete atoms ...
B. Molecules ...
C. Metallic lattice
D. Extended, three-dimensional network
1. Argon
2. Bromine
3. Nitrogen
4. Fluorine
Answer:
Discrete atoms
Argon
Molecules
Bromine
Nitrogen
Fluorine
Explanation:
The existence of substances in the elemental form depends on the nature of the substance.
Argon is a noble gas hence it seldom participates in chemical combination therefore it exists as discrete molecules in elemental form.
Bromine, fluorine and nitrogen all exist as diatomic gases because they combine readily with each other to form elemental molecules. An elemental molecule is a molecule composed of the atoms of the same element.
Describe how the accessory organs of the mouth - tongue, teeth, and saliva - aid in both MECHANICAL and CHEMICAL digestion.
Answer:
Look Below
Explanation:
In terms of mechanical digestion, the teeth provide grinding and tearing motion to break down the food into physically smaller pieces the tongue assists the teeth by moving itself and food around the mouth. In terms of chemical digestion, salivary glands in the back of the tongue and the lower mouth release saliva as a method of adding liquid to the food to help the process of swallowing. In addition, saliva contains the enzyme amylase which helps process some starches into more simple sugars.
A sample of gas has a volume of 100. L at 17 °C and 800. torr. To what temperature must the gas be cooled in order for its volume to become 50.0 L at a pressure of 600. torr? Your answer will need to be in Kelvin.
Source
StylesNormalFontSize
Answer:
108.81 K
Explanation:
First convert 17 °C to Kelvin:
17 + 273.16 = 290.16 KAssuming ideal behaviour, we can solve this problem by using the combined gas law, which states that at constant composition:
P₁V₁T₂=P₂V₂T₁Where in this case:
P₁ = 800 torrV₁ = 100 LT₂ = ?P₂ = 600 torrV₂ = 50 LT₁ = 290.16 KWe input the data:
800 torr * 100 L * T₂ = 600 torr * 50 L * 290.16 KAnd solve for T₂:
T₂ = 108.81 KA molecule of composition is replicated in a solution containing unlabeled (not radioactive) GTP, CTP, and TTP plus adenine nucleoside triphosphate with all its phosphorus atoms in the form of the radioactive isotope 32P. Will both daughter molecules be radioactive
Answer:
Please find the complete question in the attached file.
Explanation:
It would only be radioactive if the DNA molecule that employed the poly-T rand as templates. Its other molecule of the daughter would not have been radioactive as it did not need dATP for its replication. While each strand of the second molecule includes t, simultaneous reproduction dATP from both daughter molecules is needed so that each of those is radioactive.
How many moles of aluminum oxide are produced according to the reaction below given that you start with 40.0 grams of Al and 19.0 grams of O2?
Reaction: 4Al + 3O2 --> 2Al2O3
A. 0.185
B. 0.741
C. 5.00
D. 0.396
From the stoichiometry of the reaction, 0.74 moles of aluminium oxide is produced.
The equation of the reaction is;
4Al + 3O2 --> 2Al2O3
Number of moles of Al = 40.0/27 g/mol = 1.48 moles
Number of moles of O2 = 19.0 g/32 g/mol = 0.59 moles
Now;
4 mols of Al reacts with 3 moles of O2
1.48 moles of Al reacts with 1.48 moles × 3 moles/4 mols
= 1.11 moles
We can see that O2 is the reactant in excess.
Hence;
4 moles of Al produces 2 moles of aluminium oxide
1.48 moles of Al produces 1.48 moles × 2 moles/4 moles = 0.74 moles of aluminium oxide
Learn more about stoichiometry: https://brainly.com/question/9743981
Reactants which do not continue to completion are called reactants
If a solid line represents a covalent bond and a dotted line represents intermolecular attraction, which of the choices shows a hydrogen bond?
1. H−H
2. H4C⋯H−F
3. H3N⋯H−O−H
4. H2O⋯H−CH3
Answer:
3
Explanation:
Hydrogen bonding occurs between molecules in which hydrogen is bonded to a highly electronegative atom such as nitrogen, oxygen, chlorine, etc.
In option 3, the two compounds are H3N and H2O. In both molecules, hydrogen is directly attached to highly electro negative atoms(nitrogen and oxygen respectively). Hence, it is only in option 3 that we observe hydrogen bonding.
Its Acutally A Because if you use the type he used its not even the question
Explination
Im RIght
If something is not an acid or a base what is it
Answer:
neutral one with ph equal to 7
Alkenes undergo an addition reaction with borane in tetrahydrofuran (THF). For the reaction below: Write a mechanism for the reaction using curved arrows to show electron reorganization. b. write a mechanism
Answer:
See explanation and image attached
Explanation:
Alkenes react with borane (BH3) as shown in the image attached. Borane is a good electrophile since it is an electron deficient compound.
It can attack the electron rich pi bond. The attack of borane on the pi bond occurs as shown and leads to an addition reaction. Hydrogen and BH2^- are added across the double bond as shown.
The product of this reaction is shown in the image attached.
help me plsssssssss.... im timed
Answer:
a
Explanation:
a
Answer:
B. Isotopes of the element.
Explanation:
Isotopes are basically atoms of the same element that contain the same number of protons, but a different number of neutrons.
When sugar is added to a sugar solution, the sugar dissolves. Which term
describes the original sugar solution?
A. Saturated
B. Unsaturated
C. Supersaturated
D. Pseudosaturated
SUBMIT
Answer:
the answer is b,.........
Answer:
Unsaturated
Explanation:
is it a physical or chemical change when a candle is lit
state the purpose of Watson and crick DNA structure experiment
Answer:
In Watson and Crick's model, the two strands of the DNA double helix are held together by hydrogen bonds between nitrogenous bases on opposite strands. Each pair of bases lies flat, forming a "rung" on the ladder of the DNA molecule.
Explanation:
hope it helps ya
When 20 grams of KCIO3, is dissolved in 100 grams of water, the solution can be
described as.............if the solubility equals 53.3g/100g H20.
a. Saturated
c. supersaturated
b. unsaturated
d. concentrated
Answer:
b. unsaturated .
Explanation:
Hello there!
In this case, according to the given information, it turns out necessary for us to bear to mind the definition of each type of solution:
- Supersaturated solution: comprises a large amount of solute at a temperature at which it will be able to crystalize upon standing.
- Unsaturated solution: is a solution in which a solvent is able to dissolve any more solute at a given temperature.
- Saturated solution can be defined as a solution in which a solvent is not capable of dissolving any more solute at a given temperature.
In such a way, since 20 grams of the solute are less than the solubility, we infer this is b. unsaturated, as 33.3 grams of solute can be further added to the 100 grams of water.
Regards!
Which commercial technology commonly uses plasmas?
a radio
a race car
a television
a microwave oven
Answer:
A television is commercial technology commonly uses plasmas.How is a bacterium cell different from a human cell?
Answer:
Human cells are eukaryotic which means they are more complicated, bacteria cells are prokaryotic which means they are simpler
Explanation:
Hope this helps
