must undergo addition because they have easily broken π bonds. ____________ rule states in the addition of HX to an unsymmetrical alkene, the H atom bonds to the less substituted carbon atom. ____________ are unsaturated hydrocarbons because they have fewer than the maximum number of hydrogen atoms per carbon. ____________ have good leaving groups and therefore readily undergo substitution and elimination reactions. In hydroboration, the boron atom bonds to the ____________ substituted carbon.

Answers

Answer 1

Answer:

Alkenes, Markovnikov's, Alkenes, Alkyl halides, and less.

Explanation:

Alkenes must undergo addition because they have easily broken π bonds.

Markovnikov's rule states in the addition of HX to an unsymmetrical alkene, the H atom bonds to the less substituted carbon atom.

Alkenes are unsaturated hydrocarbons because they have fewer than the maximum number of hydrogen atoms per carbon.

Alkyl halides have good leaving groups and therefore readily undergo substitution and elimination reactions.

In hydroboration, the boron atom bonds to the less substituted carbon.


Related Questions

15.27
The following equilibria were attained at 823 K:
COO(s) + H2() Co(s) + H2O(g) K = 67

COO(s) + CO(8) = Co(s) + CO2(8) K = 490

Based on these equilibria, calculate the equilibrium con-
stant for
H2(g) + CO2(g) = CO(g) + H2O(g) at 823 K.

Answers

The equilibrium constant for the reaction is K = 0.137

We obtain the equilibrium constant considering the following equilibria and their constants:

COO(s) + H₂(g) → Co(s) + H₂O(g)    K₁ = 67

COO(s) + CO(g) → Co(s) + CO₂(g)   K₂ = 490

We write the first reaction in the forward direction because we need H₂(g) in the reactants side:

(1)     COO(s) + H₂(g) → Co(s) + H₂O(g)    K₁ = 67

Then, we write the second reaction in the reverse direction because we need CO₂(g) in the reactants side. Thus, the equilibrium constant for the reaction in the reverse direction is the reciprocal of the constant for the reaction in the forward direction (K₂):

(2)   Co(s) + CO₂(g) → COO(s) + CO(g)   K₂ = 1/490

From the addition of (1) and (2), we obtain:

COO(s) + H₂(g) → Co(s) + H₂O(g)    K₁ = 67

+

Co(s) + CO₂(g) → COO(s) + CO(g)   K₂ = 1/490

-------------------------------------------------

H₂(g) +  CO₂(g) → CO(g) + H₂O(g)

Notice that Co(s) and COO(s) are removed that appear in the same amount at both sides of the chemical equation.

Now, the equilibrium constant K for the reaction that is the sum of other two reactions is calculated as the product of the equilibrium constants, as follows:

K = K₁ x K₂ = 67 x 1/490 = 67/490 = 0.137

You can learn more about equilibrium constants here:

https://brainly.com/question/15118952

How many moles of (CH3)3NH+ are in 6.0 g of (CH3)3NH+?

Answers

Answer:

0.1 mol

Explanation:

6/(15*3+15)

0.1 mol moles of (CH3)3NH+ are in 6.0 g of (CH3)3NH+

What is mole?

The mole, symbol mol, exists as the SI base unit of the amount of substance. The quantity amount of substance exists as a measure of how many elementary entities of a provided substance exist in an object or sample.A mole corresponds to the mass of a substance that includes 6.023 x 1023 particles of the substance. The mole exists the SI unit for the amount of a substance. Its symbol stands mol.

The compound trimethylamine, (CH3 )3N, exists as a  weak base when dissolved in water.

A mole exist expressed as 6.02214076 × 1023 of some chemical unit, be it atoms, molecules, ions, or others. The mole exists as a convenient unit to utilize because of the great number of atoms, molecules, or others in any substance.

To find the amount of the substance (CH3)3NH+ to calculate its molar mass:

M((CH3)3NH+) = (12+3)*3 + 14+1 = 60 g/mol

n((CH3)3NH+) = m/M

m((CH3)3NH+) = 6g

Thus,

n((CH3)3NH+) = 6g/60 g/mol = 0.1 mol

Hence,

n((CH3)3NH+) = 0.1 mol

To learn more about mole refer to:

https://brainly.com/question/27952946

#SPJ2

compared to an atom of C-14, an atom of C-12 has a lesser

atomic number

number of protons

number of electrons

number of neutrons

Answers

Answer:

mass number

Explanation:

because the mass

number is the number of protons plus the number of neutron and the number of proton in an elements is always the same , therefore and atom of C-14 has greater mass number

How is magma formed?

Answers

Answer:

“Magma” is exclusively found and formed beneath the earth’s surface. Once magma is on or above the surface of the earth it is referred to as “lava.” Magma is typically formed by extreme temperature melting solid rock within the earth. Pressure and rock composition can also affect magma formation. High pressure can help magma be “squeezed” from partially molten rock. Likewise, as rocks are usually composed of different minerals with different melting points, magma formation from rocks is usually only partial and uneven.

Explanation:

Magma can also be created when hot, liquid rock intrudes into Earth's cold crust. As the liquid rock solidifies, it loses its heat to the surrounding crust. Much like hot fudge being poured over cold ice cream, this transfer of heat is able to melt the surrounding rock (the “ice cream”) into magma. Hope this helps

A chemical reaction takes place inside a flask submerged in a water bath. The water bath contains 6.90kg of water at 34.7 degrees C . During the reaction 57.1kJ of heat flows out of the bath and into the flask.
Calculate the new temperature of the water bath. You can assume the specific heat capacity of water under these conditions is 4.18J.g^(-1).K^(-1) . Round your answer to significant digits.

Answers

Answer:

[tex]T_2= 36.7 \textdegree C[/tex]

Explanation:

Mass of Water [tex]m_w=6.90kg[/tex]

Temperature [tex]T=34.7 degrees[/tex]

Heat Flow [tex]H=57.1kJ[/tex]

Specific heat capacity of water [tex]\mu= 4.18J.g^(-1).K^(-1)[/tex]

Generally the equation for Final Temperature is mathematically given by

[tex]M*\mu *T_1 + Q = M*\mu *T_2[/tex]

[tex]T_2=\frac{M*\mu *T_1 + Q }{M*\mu}[/tex]

Therefore

[tex]T_2=\frac{6.90*4.18*34.7 + 57.1}{6.90*4.18}[/tex]

[tex]T_2= 36.7 \textdegree C[/tex]

19. Which type of chemical process is used to remove salt from ocean water?
O A. Alkylation
O B. Doping
O C. Dehydrogenation
D. Desalination

Answers

Answer:

D

Explanation:

Desalination

Removing salt from sea water is known as desalination

Arrange the following compounds in order of increasing reactivity (least reactive first.) to electrophilic aromatic substitution:.

Bromobenzene Nitrobenzene Benzene Phenol

a. Bromobenzene < Nitrobenzene < Benzene < Phenol
b. Nitrobenzene < Bromobenzene < Benzene < Phenol
c. Phenol < Benzene < Bromobenzene < Nitrobenzene
d. Nitrobenzene < Benzene < Bromobenzene < Phenol

Answers

Answer:

Nitrobenzene < Bromobenzene < Benzene < Phenol

Explanation:

Aromatic compounds undergo electrophilic aromatic substitution reaction in the presence of relevant electrophiles. Certain substituents tend to increase or decrease the tendency of an aromatic compound towards electrophilic aromatic substitution reaction.

Substituents that increase the electron density around the ring such as in phenol tends to make the ring more reactive towards electrophilic substitution. Halogens such as bromine has a -I inductive effect as well as a +M mesomeric effect.

However the -I(electron withdrawing effect) of the halogens supersedes the +M electron donation due to mesomeric effect.

Putting all these together, the order of increasing reactivity of the compounds towards electrophilic aromatic substitution is;

Nitrobenzene < Bromobenzene < Benzene < Phenol

Consider the molecule PF5.
Indicate how many lone pairs you would find on the central atom:
Indicate how many total bonds are connected to the central atom (count single bonds as 1 bond, double bonds as 2 bonds, and triple bonds as 3 bonds):

Answers

Explanation:

here's the answer to your question

385 x 42.13 x 0.079 is (consider significant figures):

Answers

385 x 42.13 x 0.079 = 1281.38395

A 70.0‑g piece of metal at 80.0 °C is placed in 100 g of water at 22.0 °C contained in a calorimeter. The metal and water come to the same temperature at 24.6 °C. How much heat did the metal give up to the water?

Answers

Answer:

1087.84 J

Explanation:

From the question given above, the following data were obtained:

Mass of metal (Mₘ) = 70 g

Temperature of metal (Tₘ) = 80 °C

Mass of water (Mᵥᵥ) = 100 g

Temperature of water (Tᵥᵥ) = 22 °C

Equilibrium temperature (Tₑ) = 24.6 °C

Heat lost by metal (Qₘ) =?

NOTE: Specific heat capacity of water (Cᵥᵥ) = 4.184 J/gºC

Heat lost by metal (Qₘ) = Heat gained by water (Qᵥᵥ)

Qₘ = Qᵥᵥ

Thus, we shall determine the heat gained by water. This can be obtained as follow:

Qᵥᵥ = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)

Qᵥᵥ = 100 × 4.184 (24.6 – 22)

Qᵥᵥ = 418.4 × 2.6

Qᵥᵥ = 1087.84 J

Thus, the heat gained by water is 1087.84 J.

Heat lost by metal (Qₘ) = Heat gained by water (Qᵥᵥ)

Qₘ = Qᵥᵥ

Qᵥᵥ = 1087.84 J

Qₘ = 1087.84 J

Therefore, the heat lost by the metal is 1087.84 J

A 70.0‑g piece of metal at 80.0 °C is placed in 100 g of water at 22.0 °C contained in a calorimeter. After reaching a temperature of 24.6 °C, the heat given up by the metal to the water is -1.08 kJ.

What is a calorimeter?

A calorimeter is an object used for calorimetry, or the process of measuring the heat of chemical reactions or physical changes as well as heat capacity.

A 70.0‑g piece of metal at 80.0 °C is placed in 100 g of water at 22.0 °C contained in a calorimeter. The final temperature of the system is 24.6 °C.

Let's use the following expression to calculate the heat absorbed by the water.

Qw = c × m × ΔT

Qw = (4.184 J/g.°C) × 100 g × (24.6 °C - 22.0 °C) = 1.08 kJ

where,

Qw is the heat absorbed by the water.c is the specific heat capacity of water.m is the mass of water.ΔT is the change in the temperature for water.

According to the law of conservation of energy, the sum of the heat absorbed by the water and the heat released by the metal (Qm) is zero.

Qw + Qm = 0

Qm = -Qw = -10.8 kJ

A 70.0‑g piece of metal at 80.0 °C is placed in 100 g of water at 22.0 °C contained in a calorimeter. After reaching a temperature of 24.6 °C, the heat given up by the metal to the water is -1.08 kJ.

Learn more about calorimeters here: https://brainly.com/question/12431493

A solution is prepared by dissolving 6.60 g of an nonelectrolyte in water to make 550 mL of solution. The osmotic pressure of the solution is 1.84 atm at 25 °C. The molecular weight of the nonelectrolyte is ________ g/mol.

Answers

Answer:

160 g/mol

Explanation:

Step 1: Calculate the molarity of the solution

We will use the following expression.

π = M × R × T

where,

π: osmotic pressure of a nonelectrolyteM: molarityR: ideal gas constantT: absolute temperature (25 °C = 298 K)

M = π / R × T

M = 1.84 atm / (0.0821 atm.L/mol.K) × 298 K = 0.0752 mol/L

Step 2: Calculate the moles of solute in 550 mL (0.550 L)

0.550 L × 0.0752 mol/L = 0.0413 mol

Step 3: Calculate the molecular weight of the nonelectrolyte

0.0413 moles weigh 6.60 g.

6.60 g/0.0413 mol = 160 g/mol

explain hydrogen dioxide​

Answers

Answer:

Two molecules of hydrogen combine with two molecules of oxygen to form hydrogen peroxide. Hence, its chemical formula is H2O2. It is the simplest peroxide (since it is a compound with an oxygen-oxygen single bond). Hydrogen peroxide has basic uses as an oxidizer, bleaching agent and antiseptic

convert 100kcals to kilojoules​

Answers

Answer:

Explanation:

418.4kj is the correct answer

Determine the kinds of intermolecular forces that are present in each of the following. Part A Xe Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding Request Answer Part B N2 Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding Request Answer Part C CO Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding Request Answer Part D HF Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding

Answers

Answer:

Part A

dispersion forces

Part B

dispersion forces

Part C

dispersion forces

dipole-dipole forces

Part D

dispersion forces

dipole-dipole forces

hydrogen bonding

Explanation:

Dispersion forces occur in all molecules. They result from momentary shifts in the electron cloud of molecules which induces a dipole in another molecule. This induced dipole eventually spreads throughout the molecule.

For Xe which is a noble gas and N2 which is a diatomic molecule, dispersion forces is the only kind of intermolecular force present in the molecule.

CO is a polar molecule hence in addition to dispersion forces, dipole-dipole forces also exist in the molecule.

HF is a polar molecule hence it possesses dipole-dipole forces in addition to dispersion forces. In this molecule, hydrogen is bonded to a highly electronegative atom (fluorine). Hence, hydrogen bonding is a dominant intermolecular interaction in the molecule.

A solution is made by dissolving 5.84 grams of NaCl in enough distilled water to give a final volume of 1.00 L. What is the molarity of the solution
Group of answer choices

0.0250 M

0.400 M

0.100 M

1.00 M

Answers

Answer:

Explanation:

1. A solution is made by dissolving 5.84g of NaCl is enough distilled water to a give a final volume of 1.00L. What is the molarity of the solution? a. 0.100 M b. 1.00 M c. 0.0250 M d. 0.400 M 2. A 0.9% NaCl (w/w) solution in water is a. is made by mixing 0.9 moles of NaCl in a 100 moles of water b. made and has the same final volume as 0.9% solution in ethyl alcohol c. a solution that boils at or above 100°C d. All the above (don't choose this one) 3. In an exergonic process, the system a. gains energy b. loses energy c. either gains or loses energy d. no energy change at all

Answer:

[tex]\boxed {\boxed {\sf 0.100 \ M }}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter.

[tex]molarity = \frac{moles \ of \ solute}{liters \ of \ solution}}[/tex]

The solution has 5.84 grams of sodium chloride or NaCl and a volume of 1.00 liters.

1. Moles of Solute

We are given the mass of solute in grams, so we must convert to moles. This requires the molar mass, or the mass of 1 mole of a substance. These values are found on the Periodic Table as the atomic masses, but the units are grams per mole, not atomic mass units.

We have the compound sodium chloride, so look up the molar masses of the individual elements: sodium and chlorine.

Na: 22.9897693 g/mol Cl: 35.45 g/mol

The chemical formula (NaCl) contains no subscripts, so there is 1 mole of each element in 1 mole of the compound. Add the 2 molar masses to find the compound's molar mass.

NaCl: 22.9897693 + 35.45 = 58.4397693 g/mol

There are 58.4397693 grams of sodium chloride in 1 mole. We will use dimensional analysis and create a ratio using this information.

[tex]\frac {58.4397693 \ g\ \ NaCl} {1 \ mol \ NaCl}[/tex]

We are converting 5.84 grams to moles, so we multiply by that value.

[tex]5.84 \ g \ NaCl *\frac {58.4397693 \ g\ NaCl} {1 \ mol \ NaCl}[/tex]

Flip the ratio. It remains equivalent and the units of grams of sodium chloride cancel.

[tex]5.84 \ g \ NaCl *\frac {1 \ mol \ NaCl}{58.4397693 \ g\ NaCl}[/tex]

[tex]5.84 *\frac {1 \ mol \ NaCl}{58.4397693 }[/tex]

[tex]0.09993194823 \ mol \ NaCl[/tex]

2. Molarity

We can use the number of moles we just calculated to find the molarity. Remember there is 1 liter of solution.

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]

[tex]molarity= \frac{ 0.09993194823 \ mol \ NaCl}{1 \ L}[/tex]

[tex]molarity= 0.09993194823 \ mol \ NaCl/L[/tex]

3. Units and Significant Figures

The original measurements of mass and volume have 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandths place. The 9 in the ten-thousandths place tells us to round the 9 to a 0, but then we must also the next 9 to a 0, and the 0 to a 1.

[tex]molarity \approx 0.100 \ mol \ NaCl/L[/tex]

1 mole per liter is 1 molar or M. We can convert the units.

[tex]molarity \approx 0.100 \ M \ NaCl[/tex]

The molarity of the solution is 0.100 M.

The turbines in a hydroelectric plant are fed by water falling from a 50 m height. Assuming 91% efficiency for conversion of potential to electrical endrgy, and 8% loss of the resulting power in transmission, what is the mass flow rate of water required to power a 200 W light bulb? ​

Answers

From  the information given;

the height of the water stream = 50 mthe efficiency of conversion from potential energy to electrical energy is  91%loss of power transmission = 8%

To determine the mass flow rate, let's start by understanding some concepts and parameters.

The power is known to be the energy per unit of time. Mathematically, it can be written as:

[tex]\mathbf{Power = \dfrac{Energy}{Time}}[/tex]

[tex]\mathbf{P =\dfrac{E_p}{time}}[/tex]

[tex]\mathbf{P =\dfrac{m\times g\times z}{time}}[/tex]

where;

[tex]\mathbf{E_p}[/tex] is the potential energy of the streamm = mass flow rateg = acceleration under gravityz = height

Thus;

[tex]\mathbf{E_p}[/tex] = m × 9.81 m/s² × 50 m

[tex]\mathbf{E_p}[/tex] = m × 490.5 (m²/s²)

Recall that:

The power P = 200 W, and;the conversion of the P.E = 91% = 0.91

[tex]\mathbf{E_p}[/tex] = 0.91 × 490.5m (m²/s²)

[tex]\mathbf{E_p}[/tex] = 446.355m (m²/s²)

Since the resulting power transmission is said to be 8%

Then;

the loss in the power transmission (P) = 100% - 8% ×  446.355m (m²/s²)

the loss in the power transmission (P) = 92%  ×  446.355m (m²/s²)

the loss in the power transmission (P) = 0.92  ×  446.355m (m²/s²)

the loss in the power transmission (P) =  410.65m (m²/s²)

Finally;

P = 410.65m (m²/s²)

[tex]\mathbf{P = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]

replacing the values, we have:

[tex]\mathbf{200 = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]

[tex]\mathbf{m = \dfrac{200 watt}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

[tex]\mathbf{m = \dfrac{200 \dfrac{J}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

since 1 J/s = 1 kgm²/s²)

Then:

[tex]\mathbf{m = \dfrac{200 \dfrac{\dfrac{kg\times m^2}{s^2}}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

[tex]\mathbf{m = \dfrac{200 \ {kg}}{410.65 \ s}}[/tex]

mass flow rate of the water (m) = 0.487 kg/s

Therefore, we can conclude that the mass flow rate of the water required to power a 200 W bulb light is 0.487 kg/s

Learn more about the hydroelectric plant here:

https://brainly.com/question/2635539?referrer=searchResults

The half life of radium-226 is 1600 years. If you have 200 grams of radium today how many grams would be present in 8000 years?

Answers

Answer:

Half life is the time taken by a radio active isotope to reduce by half of its original amount. Radium-226 has a half life of 1602 years meaning that it would take 1602 years for a mass of radium to reduce by half.

Number of half lives in 9612 years = 9612/1602 = 6 half lives

New mass = Original mass x (1/2)n where n is the number of half lives.

Therefore, New mass= 500 x (1/2)∧6

                                 = 500 x 0.015625

                                 = 7.8125 g

Hence the mass of radium after 9612 years will be 7.8125 grams.

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 6.25 \ grams}}[/tex]

Explanation:

We are asked to find the mass of a sample of radium-226 after half-life decay. We will use the following formula:

[tex]A= A_o *\frac{1}{2}^{\frac{t}{h}}[/tex]

In this formula, [tex]A_o[/tex] is the initial amount, t is the time, and h is the half-life.

For this problem, the initial amount is 200 grams of radium-226, the time is 8,000 years, and the half-life is 1,600 years.

[tex]\bullet \ A_o= 200 \ g \\\\bullet \ t= 8,000 \ \\\bullet \ h= 1,600[/tex]

Substitute the values into the formula.

[tex]A= 200 \ g * \frac{1}{2} ^{\frac{8.000}{1,600}[/tex]

Solve the fraction in the exponent.

[tex]A= 200 \ g * \frac{1}{2}^{5}[/tex]

Solve the exponent.

[tex]A= 200 \ g *0.03125[/tex]

[tex]A= 6.25 \ g[/tex]

In addition, we can solve this another way. First, we find the number of half-lives by dividing the total time by the half-life.

8,000/1,600= 5 half-lives

Every half-life, 1/2 of the mass decays. Divide the initial mass in half, then that result in half, and so on 5 times.

1.  200 g/2= 100 g2. 100 g / 2 = 50 g3. 50 g / 2 = 25 g 4. 25 g / 2 = 12.5 g5. 12.5 g / 6.25 g

After 8,000 years, 6.25 grams of radium-226 remains.

molecular weight of K2SO3

Answers

Explanation:

the molecular weight of K2SO3 is 158. 2598 m/s.

Please help fast
All four referenced Greek thinkers: Democritus, Aristotle, Archimedes, and Anaxagoras, observed Nature and argued for his theory of
the composition of matter and natural laws. Only one of them tested his hypothesis and proposed a natural laws based on reproducible
observations, controlled experiments, and mathematical reasoning. All others used logic and thought experiments, as philosophers do,
to support their theories. Who is the experimental scientist in this group?
O Democritus
O Aristotle
O Archimedes
O Anaxagoras

Answers

Answer:

Anaxagoras was perhaps the first literate person to attempt to explain physical phenomena rationally, basing his ideas upon careful observations and simple experiments. This is fundamental to modern science and is the sine qua non of environmental study.

Oxygen is composed of three isotopes: oxygen-16, oxygen-17 and oxygen-18 and has an average atomic mass of 15.9982 amu. Oxygen-17 has a mass of 16.988 amu and makes up 0.032% of oxygen. Oxygen-16 has a mass of 15.972 amu and oxygen-18 has a mass of 17.970 amu. What is the percent abundance of oxygen-18?

Answers

Answer:

The percent abundance of oxygen-18 is 1.9066%.

Explanation:

The average atomic mass of oxygen is given by:

[tex] m_{O} = m_{^{16}O}*\%_{16} + m_{^{17}O}*\%_{17} + m_{^{18}O}*\%_{18} [/tex]

Where:

m: is the atomic mass

%: is the percent abundance

Since the sum of the percent abundance of oxygen isotopes must be equal to 1, we have:  

[tex] 1 = \%_{16} + \%_{17} + \%_{18} [/tex]

[tex] 1 = x + 3.2 \cdot 10^{-4} + \%_{18} [/tex]

[tex] \%_{18} = 1 - x - 3.2 \cdot 10^{-4} [/tex]

Hence, the percent abundance of O-18 is:  

[tex] m_{O} = m_{^{16}O}*\%_{16} + m_{^{17}O}*\%_{17} + m_{^{18}O}*\%_{18} [/tex]  

[tex]15.9982 = 15.972*x + 16.988*3.2 \cdot 10^{-4} + 17.970*(1 - 3.2 \cdot 10^{-4} - x)[/tex]

[tex] x = 0.980614 \times 100 = 98.0614 \% [/tex]                                                              

Hence, the percent abundance of oxygen-18 is:

[tex]\%_{18} = (1 - 3.2 \cdot 10^{-4} - 0.980614) \times 100 = 1.9066 \%[/tex]                      

Therefore, the percent abundance of oxygen-18 is 1.9066%.

I hope it helps you!                                                      

A mixture of argon and neon gases at a total pressure of 874 mm Hg contains argon at a partial pressure of 662 mm Hg. If the gas
mixture contains 12.0 grams of argon, how many grams of neon are present?

Answers

Answer:

6.684g

Explanation:

Here, we can use the mole ratio of the gases to calculate.

We know that the mole ratio of the gases equate to their number of moles.

Firstly, we calculate the number of moles of the oxygen gas. The number of moles of the oxygen gas is equal to the mass of the oxygen gas divided by the molar mass of the oxygen gas. The molar mass of the oxygen gas is 32g/mol

Thus, the number of moles produced is 5.98/32 = 0.186875

Where do we move from here?

We know that if we place the partial pressure of oxygen over the total pressure, this would be equal to the number of moles of oxygen divided by the total number of moles. Now let’s do this.

449/851 = 0.186875/n

n =(0.186875 * 851)/449

n = 0.3542

Now we do the same for argon to get the number of moles of argon.

Firstly, we use dalton’s partial pressure law to get the partial pressure of argon. In the simplest form, the partial pressure of argon is the total pressure minus the partial pressure of oxygen.

P = 851 - 449 = 402 mmHg

We now use the mole ratio relation.

402/851 = n/0.3542

n = (402 * 0.3542) / 851

n = 0.1673

Since we now know the number of moles of argon, we can use this multiplied by the atomic mass of argon to get the mass.

The atomic mass of argon is 39.948 amu

The mass is thus 39.948 * 0.1673 = 6.684g

What Volume of silver metal will weigh exactly 2500.0g. The density of silver

Answers

Answer:

cm3 = 2500.0 g / 10.5 g/cm3 = 238 cm3


Dung dịch nào sau đây chỉ chứa các ion (bỏ qua sự điện li của nước, các chất điện li mạnh phân li hoàn toàn)?
A. HBr, Na2S, Mg(OH)2, Na2CO3.
B. H2SO4, NaOH, NaCl, HF.
C. HNO3, H2SO4, KOH, K2SiO3.
D. Ca(OH)2, KOH, CH3COOH, NaCl.

Answers

Answer:

Dung dịch nào sau đây chỉ chứa các ion (bỏ qua sự điện li của nước, các chất điện li mạnh phân li hoàn toàn)?

A. HBr, Na2S, Mg(OH)2, Na2CO3.

B. H2SO4, NaOH, NaCl, HF.

C. HNO3, H2SO4, KOH, K2SiO3.

D. Ca(OH)2, KOH, CH3COOH, NaCl.

Consider the reaction: NaNO3(s) + H2SO4(l) NaHSO4(s) + HNO3(g) ΔH° = 21.2 kJ

How much heat must absorbed by the reaction system to convert 100g of NaNO3 into NaHSO4(s)?

Answers

Answer:

endet nach selam nw

4gh7

how can we convert plastic garbage energy into electric energy​

Answers

Answer:

Unfortunately, we don`t know how to convert plastic material into electricity yet. I suppose an idea is for someone to invent a machine similar to biomass, where dead plants created energy, but here it`s plastic. The only issue is that it could release deadly chemicals.

Sorry if this isn`t much help, but there isn`t really an answer.   :/

Answer:

Plastics are among the most valuable waste materials – although with the way people discard them, you probably wouldn’t know it. It’s possible to convert all plastics directly into useful forms of energy and chemicals for industry, using a process called “cold plasma pyrolysis”.

Hope this helps you ❤️

MaRk mE aS braiNliest ❤️

There are three isotopes of carbon. They have mass number of 12, 13 and 14. The average atomic mass of carbon is 12.0107 amu. What does this say about the relative abundances of the three isotopes?​

Answers

Answer:

lots more of the carbon 12 than the others

havent calculated it percentage-wise but you can see its very close to 12 meaning it is of far greater abundance that carbon 13 and 14

Explanation:

Based on the standard EMF series and your knowledge of half-reactions, determine the cell potential and spontanei ty of a cell that consists of a pure cobalt electrode in a solution of Co^2+ ions; the other half is a lead electrode immersed in a Pb^2+ solution.
Pb +2e- Pb Sn +2e Sn Ni 2e Ni Co 2e -0.126 -0.136 -0.250 -0.277 Co
a. +0.403, spontaneous
b. -0.403, nonspontaneous
c. +0.151, spontaneous
d. -0.151, nonspontaneous

Answers

Answer:

+0.151, spontaneous

Explanation:

Given that;

Co^2+(aq) + 2e ---->Co(s) -0.28 V

Pb^2+(aq) + 2e ---->Pb(s). -0.13 V

Hence Co is the anode and Pb is the cathode

E°cell = E°cathode - E°anode

So;

E°cell = -0.13 V - (-0.28 V)

E°cell = 0.15 V

The cell reaction is spontaneous since E°cell is positive.

A hot pot of water is set on the counter to cool. After a few minutes it has lost 495 J of heat energy. How much heat energy has the surrounding air gained?

_____unit_____

Answers

Answer:

495 J

Explanation:

When the hot pot was set on the counter to cool, heat energy was lost from the pot. Note that according to the first law of thermodynamics, heat is neither created nor destroyed.

This implies that, the heat energy lost from the pot must be gained by the surrounding air. Therefore, if 495 J of energy is lost from the pot, then 495 J of energy is gained by the surrounding air.

15. In the image given below, magnesium metal is coiled as a thin ribbon. What property of metal is exhibited by it? A Ductility B Lustrous C Sonorous D Malleability​

Answers

Answer: The property of magnesium that is exhibited by it is DUCTILITY. The correct option is A.

Explanation:

Magnesium is a member of the alkaline earth metals. It occurs in nature, only in the combined state, as Epsom salt, dolomite and in many trioxosilicates( IV) including talc and asbestos. They have the following physical properties:

--> Appearance: they are silvery-white solids

--> Relative density: It has a relative density of 1.74

--> DUCTILITY: it's very ductile in nature

--> melting point: it has a melting point of 660°C.

--> Conductivity: They are good conductor of heat and electricity.

Furthermore, DUCTILITY is the physical property of a metal associated with the ability to be hammered thin or stretched into wire without breaking. A metal such as magnesium can therefore be coiled as a thin ribbon without fracturing due to its ductile physical properties.

Carbon dioxide gas is collected at 27.0 oC in an evacuated flask with a measured volume of 30.0L. When all the gas has been collected, the pressure in the flask is measured to be 0.480atm. Calculate the mass and number of moles of carbon dioxide gas that were collected.

Answers

Answer:

[tex]M_{CO_2}= 25.7g[/tex]

Explanation:

From the question we are told that:

Temperature [tex]T=27.0[/tex]

Volume [tex]V=30L[/tex]

Pressure [tex]P=0.480atm[/tex]

Generally the equation for Ideal gas is mathematically given by

PV=nRT

Therefore

[tex]n=\frac{0.480 x 30}{0.08205 x 300}[/tex]

[tex]n=0.59moles[/tex]

Generally Mass of CO2 is given as

[tex]M_{CO_2}= 0.59 * 44 g/mol[/tex]

[tex]M_{CO_2}= 25.7g[/tex]

Other Questions
is there any machine that is 100% efficient? why?why not cual es el adjetivo en *lucia quedo de 3era en la carrera* when did the bady langur finally find comporta 10. I purchased a hair-dryer for 5,400 including 8% VAT. Find the price before VAT was added. As a result of the Boston Massacre, the British removed all taxes except for thoseplaced onColonists then dumped $worth of tea intothe Boston harbor in an event that is known as theI need help he was asking my name intochange into indirect speech A perfect correlation is denoted by:A. +1.0 and -1.0B. +1.00C. -1.00D. .50 1. What describes hypospadias? 1 point A. Scrotal lymphedema B. Undescended testicle C. Ventral urinary meatus D. Inflammation of the prepuce2. Which of the following is an ocular change that may be hyperthyroidism? A. Ptosis B. Open angle glaucoma C.Exophthalmos D.Presbyopia this is geometry. hi i need help pls. who is the president of sri lanka? Help would be appreciated :) A capsule containing 0.500 L of air at 1.00 atm is compressed to 3.25 atm. At that point, what is the volume of the gas in the capsule? The Online Exam from Applied Statistics consists of 6 questions. Statistics show that there is a 75% chance that the student will answer to any one of Exam problems correctly. If the number of attempts for each question is unlimited, find the following probabilitiesa. The student will correctly answer the first question after the 4th attempt. b. The student will correctly answer three questions after 10 total attempts. c. What is the average number and SD of attempts up to when the student answers all the questions correctly? The temperature of a body falls from 30C to 20C in 5 minutes. The airtemperature is 13C. Find the temperature after a further 5 minutes. Write a program that creates an an array large enough to hold 200 test scores between 55 and 99. Use a Random Number to populate the array.Then do the following:1) Sort scores in ascending order.2) List your scores in rows of ten(10) values.3) Calculate the Mean for the distribution.4) Calculate the Variance for the distribution.5) Calculate the Median for the distribution. Ok ong i'm struggling and need help i've been up all night- Ill give brainlyest!!Solve the following problems below. Find the variable and show your work1.) 7(6x-1)+x=362.) 11-2(8+3p)=73.) 1/4(5b+11)=194.) 2/7(4m-18)=12 A net is a two-dimensional pattern that can be folded to form a three-dimensional surface. T/F Which factor would speed up a chemical reaction? (Choose all that apply)Decreasing particle sizeIncreasing the temperatureDecreasing the temperatureIncreasing particle size PLEASE HELP I NEED THIS ASAPSelect all that apply.The spectrum of Star S is compared to a reference hydrogen spectrum. What can be concluded about Star S?Star S has radial motion.Star S has transverse motion.Star S is moving toward Earth.Star S is moving away from Earth. This is CIVICS IF UR CORRECT ILL GIVE BRAINLISTAccording to the laws of supply and demand, what will happen to the supply of automobiles if automobile prices fall?A. The supply of automobiles will decrease because consumers will buy more of them at higher prices. B. The supply of automobiles will increase because consumers will buy more of them at lower prices.C. The supply of automobiles will increase because consumers will buy more of them at higher prices.D. The supply of automobiles will decrease because consumers will buy more of them at lower prices.