Answer:
pH = 5.7
Explanation:
Which is the pH of the solution?
The pH is a measurement widely used in chemistry in quality assurance of products and another analysis. Is defined as the -log [H3O+]. That means, the pH of the solution that is [H3O+] = 2x10-6 M is:
pH = -log [H3O+]
pH = -log [2x10-6 M]
pH = 5.7In an oxidation-reduction reaction, the substance oxidized always ________. a. takes on oxygen atoms b. gives up hydrogen atoms c. gains electrons d. loses electrons e. becomes a charged species
Answer:
Explanation:
Let us define oxidation and reduction.
Oxidation and reduction deal with the transferring of electrons between reactants. The reactant that loses electrons is oxidized, while the reactant that gains electrons is reduced.
In an oxidation-reduction reaction, the substance oxidized always loses electrons and the correct option is option D.
An oxidation-reduction (redox) reaction is a type of chemical reaction that involves the transfer of electrons between species. It consists of two half-reactions: an oxidation half-reaction, where a species loses electrons and increases its oxidation state, and a reduction half-reaction, where a species gains electrons and decreases its oxidation state.
In an oxidation half-reaction, the species that is oxidized is called the reducing agent or the electron donor, as it donates electrons. In a reduction half-reaction, the species that is reduced is called the oxidizing agent or the electron acceptor, as it accepts electrons.
Thus, the ideal selection is option D.
Learn more about Oxidation-reduction reactions, here:
https://brainly.com/question/19528268
#SPJ6
Lab 2: paper chromatography of organic dyes
Picture of questions below.
Answer:
The three primary colors used when mixing dyes or paints are red, yellow, and blue. Other colors are often a mixture of these three colors. Try running a chromatography test again with non-primary-color markers, like purple, brown, and orange.
Explanation:
Mixtures that are suitable for separation by chromatography include inks, dyes and colouring agents in food. ... As the solvent soaks up the paper, it carries the mixtures with it. Different components of the mixture will move at different rates. This separates the mixture out.
Molybdenum (Mo) crystallizes with a body-centered cubic lattice and has an atomic radius of 136.1 pm.
a. Calculate the density of molybdenum in g/cm^3. Show all work. Include units with all numbers and show how units cancel.
b. Calculate the density of molybdenum in g/cm^3
2 AICI3 + 3 Ca - 3 CaCl2 + 2 Al
You react aluminum chloride with calcium metal. You want to produce 40.00 grams of aluminum. How many grams of calcium do you need?
The product of an organic reaction is analyzed by column chromatography using silica as the stationary phase and toluene as the mobile phase.
a. True
b. False
Answer:
The product of an organic reaction is analyzed by column chromatography using silica as the stationary phase and toluene as the mobile phase.
Explanation:
The given statement is true.
In chromatography silica gel is used as the predominant stationary phase.
Since silica gel is a good adsorbent.
It is a polar adsorbent.
In order to remove polar components, silica gel is used as the stationary phase.
Answer is a.true.
During seafloor spreading, what kind of new earth forms?
Answer:
This bubbled-up magma is cooled by frigid seawater to form igneous rock. This rock (basalt) becomes a new part of Earth's crust. Seafloor spreading occurs along mid-ocean ridges—large mountain ranges rising from the ocean floor.
Explanation:
mark me as BRAINLIEST
follow me
carry on learning
pasagot po please!!
science po ito pasagot po matino need ko po!!
Explanation:
Efficiency = (output/input)×100%
70% = output/(800 W)
which means
output = 0.70×(800 W) = 560 W
What is represented by the chemical formula
PbCl2(s)?
A) a substance
B) a solution
C) a homogeneous mixture
D) a heterogeneous mixture
Answer:
what is represented is a substance
PbCl2(s) is a substance
When writing chemical formulae or equations , we use chemical symbols to express the state of matter and the conditions of an element, compound or reactants .
The symbols to represent physical states of matter are are
(s) This tells that the substance is in solid state
(aq ) means aqueous, It tells that the substance has been dissolved and it is in a solution.
(l)This tells that the substance is in liquid state
(g)This tells that the substance is in gaseos state
Now, PbCl2(s) is a substance in the solid state.
See here:https://brainly.com/question/2167551
The carbon-carbon bonds in benzene are:
O a) Easily broken in chemical reactions
b) A hybrid between double bonds and single bonds
c)
Identical to the carbon-carbon bonds in cyclohexene
d) Identical to the carbon-carbon bonds in cyclohexane
please hurry
Answer:
a
Explanation:
Easily broken in chemical reactions
The cell potential of the following electrochemical cell depends on the pH of the solution in the anode half-cell:Pt(s)|H2(g, 1atm)|H+(aq, ?M)||Cu2+(aq,1.0M)|Cu(s)What is the pH of the solution if Ecell = 355 mV?
Answer:
0.51
Explanation:
Given the Nernst equation;
E= E° - 0.0592/n logQ
E= 355 mV or 0.355 V
E° = 0.34 - 0= 0.34 V
n= 2(two electrons were transferred in the process)
Equation of the reaction;
H2(g) + Cu^2+(aq) -----> 2H^+(aq) + Cu(s)
Substituting values;
0.355 = 0.34 - 0.0592/2 log([H^+]/1)
0.355 - 0.34 = - 0.0296 log [H^+]
0.015/-0.0296 = log [H^+]
Antilog (-0.5068) = [H^+]
[H^+] = 0.311 M
pH = -log[H^+]
pH= - log(0.311 M)
pH = 0.51
The potential difference between the half cell of the electrochemical cell is called cell potential. The pH of the solution at 355 mV will be 0.51.
What is an electrochemical cell?An electrochemical cell generates electricity from the redox chemical reactions occurring inside the cell.
The balanced chemical reaction is shown as,
[tex]\rm H_{2}(g) + Cu^{2+}(aq) \rightarrow 2H^{+}(aq) + Cu(s)[/tex]
Using the Nernst equation:
[tex]\rm E= E^{\circ} - \dfrac{0.0592}{n }logQ[/tex]
Given,
E = 0.355 V
E° = 0.34 V
n = 2
Substituting values in the above equation:
[tex]\begin{aligned} 0.355 &= 0.34 - \dfrac{0.0592}{2} \;\rm log(\dfrac{[H^{+}]}{1})\\\\0.355 - 0.34 &= - 0.0296 \rm \; log [H^{+}]\\\\\dfrac{0.015}{-0.0296} &= \rm \; log [H^{+}]\end{aligned}[/tex]
Solving further,
[tex]\begin{aligned} \rm Antilog (-0.5068)& = \rm [H^{+}]\\\\\rm [H^{+}] &= 0.311 \;\rm M \end{aligned}[/tex]
The pH of the solution is calculated as:
[tex]\begin{aligned} \rm pH &= \rm -log[H^{+}]\\\\&= \rm - log(0.311\; M)\\\\&= 0.51\end{aligned}[/tex]
Therefore, 0.51 is the pH of the solution.
Learn more about pH here:
https://brainly.com/question/9207631
The formula for europium oxide is Eu203. On the basis of this information, the formula for the chlorate of europium would be expected to be
Answer:
Eu(ClO3)3
Explanation:
The chlorate ion is written as follows, ClO⁻ ₃. We can see from this that the ion is univalent.
From the formula, Eu203, it is easy to see that the europium ion is trivalent.
Hence, when a compound is formed between the europium ion and chlorate ion, the compound will be written as Eu(ClO3)3.
This is so because, when ionic compounds are formed, there is an exchange of valence between the ions in the compound. This gives the final formula of the ionic substance.
For this task, you will consider the information you have researched so far, conduct further research, create a thesis, and write a one-page research paper based on your research and thesis. Your research and thesis should address the following prompt: How should Florida address its growing energy demands, and what energy sources should the state focus on in the future? Consider the energy options available in Florida, the pros and cons of various energy sources, as well as concepts such as energy conservation.
In the next steps, you will conduct further research, form a thesis, and write a one-page research paper based on your findings and opinions.
a. Select a topic. Before creating your report, understand the purpose, process, and goals of a research assignment.
The first step in writing a research paper is to select a topic; in this assignment your topic should focus on issues related to energy production and consumption in Florida.
Begin brainstorming ideas by thinking about your prior knowledge of the topic.
Try engaging in preliminary research to help select a relevant, interesting topic.
b. Choose a thesis statement. Begin thinking about the stance or viewpoint that your writing will take. Once you have a general idea of your opinion, develop a thesis statement, or the main idea of an essay that includes the topic and the viewpoint.
Make sure that the thesis is relevant to the topic and assignment.
Keep in mind that as you continue researching and begin writing, your thesis may change slightly from your original idea.
Check with your teacher to make sure that the topic you chose is appropriate and feasible.
c. Gather sources. Next, begin gathering and organizing additional sources to build your argument. It is important to understand the purpose of your research. Evaluate each source, and consider these questions:
Who authored the document?
What is the purpose of the document?
When was the document written?
How will this document help your argument?
d. Develop your position. Now that you have analyzed sources to use as evidence, revisit the essay topic. Then develop your report with these factors in mind:
Create an outline to help organize the structure of your report.
Your thesis should be well-supported by your research.
Match the evidence in your sources to the points in your report.
Articulate any solutions you may think are relevant to deal with the energy issues in Florida.
e. Write your first draft. Write a one-page research paper on your selected topic. As you write your paper, use quotations from and summaries of your sources to support your argument.
To avoid plagiarism, make sure to cite your sources properly with in-text citations and a works cited page.
f. Proofread and Revise. When you are finished writing your first draft, reread your essay to check for all of the points above, and then proofread and revise to be sure your work doesn’t contain errors in grammar, spelling, logic, or cohesion. Finally, develop a final draft that is polished and ready to be turned in. Nice work!
Answer:
What kind of chemical reaction occurs when fossil fuels and biomass are burned? What is produced in addition to energy?
What is acid rain? Which fossil fuel causes acid rain? What are the chemical reactions that produce the acid?
Difference Between Biomass and Fossil Fuels
In terms of environmental impact, what’s the difference between natural gas, coal, and biomass? Consider both carbon dioxide (CO2) emissions and acid rain.
What’s the difference between nonrenewable and renewable energy sources? Is biomass a renewable energy source?
What’s a new discovery that makes it easier to use biomass as an energy source?
Comparing Biomass with Other Renewable Energy Sources
What are the pros and cons of several renewable energy sources? Renewable energy sources include biomass, wind power, hydropower, solar power, and geothermal power.
Making Recommendations for Energy Choices
Which renewable energy sources should be developed in your area, and why? Consider abundance of the energy source, ease of setup in your area, and cost.
Review the seven questions. Write a few sentences summarizing what you already know about these topics.
Explanation:
For alkyl halides used in SN1 and SN2 mechanisms, rank the leaving groups in order of reaction rate. You are currently in a ranking module. Turn off browse mode or quick nav, Tab to move, Space or Enter to pick up, Tab to move items between bins, Arrow Keys to change the order of items, Space or Enter to drop.
Answer:
Iodide> Bromide > chloride > flouride
Explanation:
During a nucleophilic substitution reaction, a nucleophilie replaces another in a molecule.
This process may occur via an ionic mechanism (SN1) or via a concerted mechanism (SN2).
In either case, the ease of departure of the leaving group is determined by the nature of the C-X bond. The stronger the C-X bond, the worse the leaving group will be in nucleophilic substitution. The order of strength of C-X bond is F>Cl>Br>I.
Hence, iodine displays the weakest C-X bond strength and it is thus, a very good leaving group in nucleophillic substitution while fluorine displays a very high C-X bond strength hence it is a bad leaving group in nucleophilic substitution.
Therefore, the ease of the use of halide ions as leaving groups follows the trend; Iodide> Bromide > chloride > flouride
Plz help!!!! NO LINKS
Answer:
481.16 cm³
Explanation:
From the question given above, the following data were obtained:
Height (h) = 11.72 cm
Diameter (d) = 7.23 cm
Pi (π) = 3.14159
Volume of cylinder (V) =?
Next, we shall determine the radius. This can be obtained as follow:
Diameter (d) = 7.23 cm
Radius (r) =?
r = d/2
r = 7.23 / 2
r = 3.615 cm
Finally, we shall determine the volume of the cylinder. This can be obtained as shown below:
Height (h) = 11.72 cm
Pi (π) = 3.14159
Radius (r) = 3.615 cm
Volume of cylinder (V) =?
V = πr²h
V = 3.14159 × 3.615² × 11.72
V = 3.14159 × 13.068225 × 11.72
V = 481.16 cm³
Therefore, the volume of the cylinder is 481.16 cm³.
carbon dioxide gas evolve during the fermentation of sugar which was collected at 22.5°C and 0.945 ATM after perfect strangers in the volume was found to be 25.0 ML how many grams of carbon dioxide were collected
Answer:
0.043 grams
Explanation:
We can find the mass of carbon dioxide as follows:
[tex] m = n*M [/tex]
Where:
n: is the number of moles
M: is the molar mass = 44.01 g/mol
First, we need to calculate the number of moles. We can use the Ideal gas equation:
[tex] PV = nRT [/tex]
Where:
P: is the pressure = 0.945 atm
V: is the volume = 25.0 mL
R: is the gas constant = 0.082 L*atm/(K*mol)
T: is the tempearture = 22.5 °C
[tex]n = \frac{PV}{RT} = \frac{0.945 atm*25 mL*\frac{1 L}{1000 mL}}{0.082 L*atm/K*mol*(22.5 + 273) K} = 9.75 \cdot 10^{-4} moles[/tex]
Hence, the mass is:
[tex]m = 9.75 \cdot 10^{-4} moles*44.01 g/mol = 0.043 g[/tex]
Therefore, 0.043 grams were collected.
I hope it helps you!
Calculate [H3O+] and [OH−] for each of the following solutions at 25 ∘C given the pH.
pH= 2.89
Answer: The value of [tex][H_{3}O^{+}][/tex] is 0.0012 M and [tex][OH^{-}][/tex] is [tex]1.02 \times 10^{-14}[/tex].
Explanation:
pH is the negative logarithm of concentration of hydrogen ion.
It is given that pH is 2.89. So, the value of concentration of hydrogen ions is calculated as follows.
[tex]pH = - log [H^{+}]\\2.89 = - log [H^{+}]\\conc. H^{+} = 0.0012 M[/tex]
The relation between pH and pOH value is as follows.
pH + pOH = 14
0.0012 + pOH = 14
pOH = 14 - 0.0012 = 13.99
Now, pOH is the negative logarithm of concentration of hydroxide ions.
Hence, [tex][OH^{-}][/tex] is calculated as follows.
[tex]pOH = - log [OH^{-}]\\13.99 = - log [OH^{-}]\\conc. OH^{-} = 1.02 \times 10^{-14} M[/tex]
Thus, we can conclude that the value of [tex][H_{3}O^{+}][/tex] is 0.0012 M and [tex][OH^{-}][/tex] is [tex]1.02 \times 10^{-14}[/tex].
A solution of KMnO4 has an absorbance of 0.539 when measured in the colorimeter. Determine the concentration of the KMnO4 given the following data for a calibration plot.
Concentration of KMNO4 (M) Absorbance
0.0150 0.081
0.0300 0.159
0.0450 0.260
0.0600 0.334
Answer:
Concentration of unknown solution is 0.0416 M
Explanation:
As we know
Absorbance is equal to the product of molar absorptivity of KMnO4 m, path length and concentration
From the given set of graphical data, it is clear that the absorbance vs concentration is a straight line.
From the graph, we can obtain-
Y = 5.73 X – 0.0065
Absorbance = 0.232
0.232 = 5.73 X – 0.0065
X = 0.0416
Concentration of unknown solution is 0.0416 M
which is a characteristic of oxygen
Answer:
Characteristics of oxygen are as follows:
In normal conditions oxygen is a colourless, odourless and insipid gas.It condensates in a light blue liquid.Oxygen is part of a small group of gasses literally paramagnetic and it's the most paramagnetic of all.Liquid oxygen is also slightly paramagnetic.How do we fix climate change?
The biggest problem of course is conspiracy theorys. Some say it is just a hoxe when really their chidrin or grandchidrin will sufer greatly from it. How do we educate ourselfs better?
Answer:
Hi so your answer is that to helping fix the climate change you have to : speak up , power your home with renewable engery , reduce water waste , dont waste food , and finally invest energy .
Explanation:
Really hope i helped , have a nice day :)
Answer:
we can reduce air pollution,which is one of the main cause of climate change.Climate change is not a hoxe if it is not attending the upcoming generations will suffer greatly.
13. The attraction between water molecules and an Na+
ion or a Cl- ion occurs because water molecules are
A) linear
B) symmetrical
C) polar
D) nonpolar
Answer:
C) Polar
Explanation:
The correct answer is polar
The attraction of sodium and chloride ions by the water is mediated by the polar nature of water. Thus, option C is correct.
What is polarity?The polarity is given as the formation of the partial positive and negative charge over the species in the ionization process.
Water molecule is having one hydrogen bounded with 2 oxygen atoms, and oxygen being more electronegative develops a partial negative charge, while hydrogen develops a partial positive charge.
The positive charge hydrogen and the negative charge oxygen attracts the opposite charge sodium and chloride ions. Thus, the attraction is mediated due to the polar nature of water. Hence, option C is correct.
Learn more about polarity, here:
https://brainly.com/question/3184550
#SPJ2
A 14.570 g sample of CaCl2 was added to 12.285 g of K2CO3 and mixed in water. A 3.494 g yield of CaCO3 was obtained.
What is the limiting reagent?
-CaCO3
-K2CO3
-CaCl2
Calculate the percent yield of CaCO3.
yield of CaCO3= %
Answer:
Limiting reagent is the potassium carbonate.
Percent yield of calcium carbonate is: 39.3 %
Explanation:
The reaction is:
CaCl₂ + K₂CO₃ → CaCO₃ + 2KCl
Formula for percent yield is:
(Produced yield / Thoeretical yield) . 100
Firstly we determine the moles of each reactant, in order to say what is the limiting reagent: ratio is 1:1.
1 mol of chloride need 1 mol of carbonate.
14.570 g . 1 mol /110.98 g = 0.131 moles of CaCl₂
12.285 g . 1 mol / 138.2g = 0.0889 moles of carbonate.
Limiting reagent is carbonate. For 0.131 moles of CaCl₂ we need the same amount of carbonate and we have less moles.
Ratio is also 1:1, with calcium carbonate.
1 mol of potassium carbonate produces 1 mol of calcium carbonate
then, 0.0889 moles will produce the same amount of CaCO₃
We convert moles to mass: 0.0889 mol . 100.08g /mol = 8.89 g
That's the theoretical yield; to find the percent yield:
(3.494 g / 8.89g) . 100 = 39.3%
Question 10 What is the UPAC name for this compound? CH3-----CHO
Answer:
Ethanal or acetaldehyde
Explanation:
Ethanal, also called acetaldehyde is the second member of the alkanal or aldehyde group of hydrocarbons, which have a functional group of -CHO. The -CHO functional group characterizes every member to this group and makes them behave chemically similar.
However, the second member of this aldehyde group with a formula of CH3----CHO, has a methyl group (CH3) attached to the functional group, hence, it is called ETHANAL OR ACETALDEHYDE.
Given the following values for the change in enthalpy (deltaH) and entropy (deltaS), which of the following processes can occur at 298 K without violating the second Law of Thermodynamics?
(a) DeltaH = -84 kj mol-2 (-20 kcal mol-1), DeltaS = +125j mol-2K-1)(+30 cal mol-1 K-1)
(b) DeltaH = -84 kj mol-2 (-20 kcal mol-1), DeltaS = -125j mol-2K-1)(-30 cal mol-1 K-1)
(c) DeltaH = +84 kj mol-2 (+20 kcal mol-1), DeltaS = +125j mol-2K-1)(+30 cal mol-1 K-1)
(d) DeltaH = +84 kj mol-2 (+20 kcal mol-1), DeltaS = +125j mol-2K-1)(-30 cal mol-1 K-1)
Answer:
Option A and B
Explanation:
(a) DeltaH = -84 kj mol-2 (-20 kcal mol-1), DeltaS = +125j mol-2K-1)(+30 cal mol-1 K-1)
Delta G = Delta H – T * DS
Substituting the given values, we get –
Delta G = -84 -298 *(125/1000) = -121.25 KJ/mol
Delta G is negative hence the process is spontaneous and will not violate the second law of thermodynamics
(b) DeltaH = -84 kj mol-2 (-20 kcal mol-1), DeltaS = -125j mol-2K-1)(-30 cal mol-1 K-1)
Delta G =-84 -298 *(-125/1000) = -46.75 KJ/mol
Delta G is negative hence the process is spontaneous and will not violate the second law of thermodynamics
(c) DeltaH = +84 kj mol-2 (+20 kcal mol-1), DeltaS = +125j mol-2K-1)(+30 cal mol-1 K-1)
Delta G = 84 -298 *(125/1000) = +46.75 KJ/mol
Delta G is positive hence the process is non-spontaneous and will violate the second law of thermodynamics
(d) DeltaH = +84 kj mol-2 (+20 kcal mol-1), DeltaS = +125j mol-2K-1)(-30 cal mol-1 K-1)
Delta G = 84 -298 *(-125/1000) = + 121.25 KJ/mol
Delta G is positive hence the process is non-spontaneous and will violate the second law of thermodynamics
1. How many atoms of chlorine are present in 1.70x1023 molecules Cl2?
Explanation:
the answer is in the image above
For the iron thiocyanate system, what is the value of the equilibrium constant, Kc, if the following are the concentrations of all species present. Provide your answer to three digits after the decimal.
FeSCN2+ 0.501
Fe3+ 0.494
SCN- 0.639
Answer:
Kc = 0.630
Explanation:
The equilibrium of the thiocyanate system occurs as follows:
FeSCN²⁺(aq) ⇄ Fe³⁺(aq) + SCN⁻(aq)
And equilibrium constant, kc, is:
Kc = [SCN⁻] [Fe³⁺] / [FeSCN²⁺]
Replacing with the gven concentrations:
Kc = 0.639M*0.494M / 0.501M
Kc = 0.630What is the pH of a 1.7 × 10⁻⁴ M HClO₄ solution?
Which is a property of barium (Ba)?
O A. It rarely reacts with other elements.
O B. It is brittle as a solid.
O c. It is very reactive.
O D. It does not conduct electricity.
Plzzzzz helppppp!!!
Answer:
a it rarely reach with other elements
Electron sharing can be depicted by a Lewis dot structure, in which element symbols are surrounded by dots that represent the valence electrons (electrons in the ___________ shell). A ______________ bond is the sharing of a pair of valence electrons by _____________ atoms. Hydrogen has _____________ valence electron(s) in the first shell, but the capacity of the shell is ______________ electron(s). When a hydrogen atom comes close enough to a carbon atom for their orbitals to overlap, they can share their electrons. The hydrogen atom is now associated with _______________ electron(s) and a ______________ bond is formed. As a result, one of the structures does not make sense because hydrogen has only ____________ valence electron(s) to share, so it cannot form bonds with two atoms.
Answer:
Outermost
Covalent
Two
One
Two
Two
Covalent
One
Explanation:
A covalent bond is formed when an atom shares two electrons with another atom. These shared electrons could be contributed by each of the bonding atoms or by only one of the bonding atoms.
Hydrogen has the electronic configuration of 1s1. This implies that it has only one electron in its valence shell although the 1s shell can accommodate two electrons. When the atomic orbitals of carbon and hydrogen overlap, they share two electrons and hydrogen is now associated with two electrons in a covalent bond.
Since hydrogen possesses only one valence electron, it can not be bonded to two atoms.
Chlorine gas can be prepared in the laboratory by the reaction of hydrochloric acid with manganese(IV) oxide.
4HCl(aq)+MnO2(s)⟶MnCl2(aq)+2H2O(l)+Cl2(g)
A sample of 43.1g MnO2 is added to a solution containing 42.9g HCl.
a. What is the limiting agent?
b. What is the theoretical yield of Cl2?
c. If the yield of the reaction is 72.9%, what is the actual yield of chlorine?
Answer:
A. HCl is the limiting reactant.
B. Theoretical yield of Cl₂ is 20.9 g.
C. Actual yield of Cl₂ = 15.2 g.
Explanation:
The balanced equation for the reaction is given below:
4HCl + MnO₂ –> MnCl₂ + 2H₂O + Cl₂
Next, we shall determine the masses of HCl and MnO₂ that reacted and the mass of Cl₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of HCl = 1 + 35.5
= 36.5 g/mol
Mass of HCl from the balanced equation = 4 × 36.5 = 146 g
Molar mass of MnO₂ = 55 + (2×16)
= 55 + 32
= 87 g/mol
Mass of MnO₂ from the balanced equation = 1 × 87 = 87 g
Molar mass of Cl₂ = 2 × 35.5
= 71 g/mol
Mass of Cl₂ from the balanced equation = 1 × 71 = 71 g
SUMMARY:
From the balanced equation above,
146 g of HCl reacted with 87 g of MnO₂ to produce 71 g of Cl₂.
A. Determination of the limiting reactant.
From the balanced equation above,
146 g of HCl reacted with 87 g of MnO₂.
Therefore, 42.9 g of HCl will react with = (42.9 × 87)/146 = 25.6 g of MnO₂.
From the calculation made above, we can see clearly that only 25.6 g out of 43.1 g of MnO₂ given was needed to react completely with 42.9 g of HCl.
Therefore, HCl is the limiting reactant.
B. Determination of theoretical yield of Cl₂.
Here, the limiting reactant will be used.
From the balanced equation above,
146 g of HCl reacted to produce 71 g of Cl₂.
Therefore, 42.9 g of HCl will react to produce = (42.9 × 71)/146 = 20.9 g of Cl₂.
Thus, the theoretical yield of Cl₂ is 20.9 g.
C. Determination of the actual yield of Cl₂.
Theoretical yield of Cl₂ = 20.9 g
Percentage yield of Cl₂ = 72.9%
Actual yield of Cl₂ =?
Percentage yield = Actual yield / Theoretical yield × 100
72.9% = Actual yield / 20.9
Cross multiply
Actual yield = 72.9% × 20.9
Actual yield = 72.9/100 × 20.9
Actual yield = 0.729 × 20.9
Actual yield of Cl₂ = 15.2 g
Como es la
fórmula química del agua
Answer:
h2o
Explanation:
