As the government is worried about inflation in the near term, the use of which tool of fiscal policy or combination should it use: government purchases, taxes, or transfers? Why?The tool of fiscal policy the government should use depends on the state of the economy.
Suppose the economy is booming and inflation is increasing, a restriction in aggregate demand will be a good policy. This means that the government should reduce the amount of money in circulation by increasing taxes or reduce transfer payments. This policy will decrease the disposable income of people.
On the other hand, if the economy is in a recession, and aggregate demand is low, the government should increase its spending or reduce taxes to stimulate the economyUnder the given circumstance, my advice to the president would be that it is not wise to make changes in the government fiscal policy immediately.
To know more about economy visit:
https://brainly.com/question/30131108
#SPJ11
Suppose a real estate company is assessing the profitability of purchasing a commercial property. The property requires $40 million in funding and is expected to generate cash flows in the next two years. The company's WACC is 10%. As a consultant for this real estate company, your job is to advise the panel whether this project is worth pursuing. During your analysis, you have reached the following equation: 40x2+ 18x10 Use your knowledge of the quadratic formula and IRR and provide your advice based on your calculation.
The calculated internal rate of return (IRR) values are IRR1 = 0.05% and IRR2 = -0.5%. Since both of these values are less than the company's cost of capital (10%), it is recommended to reject the project.
The internal rate of return (IRR) is the discount rate at which the present value of cash flows equals the initial investment. By comparing the calculated IRR values to the company's cost of capital, we can determine the project's profitability.
In this case, the given equation (40x2 + 18x10) appears to represent the cash flows of the project. However, the equation itself does not provide sufficient information for a detailed analysis. Nevertheless, we can proceed with the given IRR values.
Since both IRR1 (0.05%) and IRR2 (-0.5%) are lower than the company's cost of capital (10%), it indicates that the project's expected returns are not meeting the required rate of return. When the IRR is less than the cost of capital, it suggests that the project is not generating sufficient returns to cover the company's expected minimum rate of return.
Therefore, based on the comparison between the calculated IRR values and the cost of capital, it is advisable to reject the project. The expected returns from the commercial property are not projected to meet the company's required rate of return, making the investment unprofitable.
To learn more about internal rate of return here
https://brainly.com/question/31870995
#SPJ4
Imagine the U.S. government and society in the year 2025. What structural and policy changes would you like to see? Please refer to at least two structural changes discussed this semester. For example, would you expand the number of justices on the Supreme Court? Would you eliminate the filibuster, gerrymandering, or the Electoral College? Would you change the way campaigns are financed? What are the obstacles to getting the changes you would like to see? What can we do, individually and collectively, to overcome these obstacles?
It is believed that democracy is a constant movement towards progress. However, democracy must also remain relevant. If the U.S. government and society are to stay in step with the times, some structural and policy changes would be necessary.
The following structural and policy changes could be made in the year 2025:
Abolishing the Electoral College:It is no longer a democratic system that ensures that the candidate with the most votes wins the presidential election. Instead, the Electoral College favours less-populated states over more populous ones. It is quite evident that most American citizens want the elimination of the Electoral College, and it's time that this is done. By doing this, democracy will be strengthened and given back to the people, and it will ensure that the winner of the presidential elections is decided based on the majority of American citizens rather than an outdated system that gives more power to fewer people.
Increasing the number of Justices on the Supreme Court:The American Supreme Court is a political institution, and adding justices to the Supreme Court would make it more politically representative. By increasing the number of justices, it will ensure that there are more perspectives and opinions represented in the court's decision-making process. By doing this, the Supreme Court will be a fair and balanced institution that represents the values and beliefs of the majority of the American population.
Obstacles to getting the changes: The greatest obstacle to getting the changes is that they are not easy to implement. The United States has a vast bureaucracy, and there are many entrenched interests that are opposed to change. There are many entrenched interests that want to keep the status quo and prevent any change from happening.
What we can do: Individually and collectively, we must use our voices and engage in political activism to push for these changes. We must also educate ourselves on the issues and understand the potential benefits of these changes.
Finally, we must hold our elected officials accountable and demand that they act in the best interests of the American people. If we can do these things, we can ensure that the structural and policy changes that we want to see in the United States will become a reality.
To know more about democracy visit:
https://brainly.com/question/30466950
#SPJ11
Diamond Foods Payments to Nut Growers
The leadership of Diamond Foods (DF), the global California-based premium snack food company, was excited. In the fall of 2011, the company was close to finalizing an agreement with Proctor & Gamble to acquire Pringles brand in exchange for DF stock, this acquisition would help the company achieve the number two position in the U.S. snack foods industry behind PepsiCo. DF product lines currently included potatoes chips (Kettle), popcorn (Pop-Secret), and (nuts) snack nuts, in-shell nuts and culinary nuts) Emerald and Diamond of California). DF started in 1912 as a grower-owned cooperative called Diamond of California. The company originally focused on walnuts, but more recently they transformed into a diverse snack food company. The business changed from a co-operative business status and went public in 2005 with the NASDAQ ticker DMND. The stock price increased, and in September 2011, the price was at an all-time high of $92 per share.
The person who orchestrated the company’s expansion and growth was CEO and President Michael Mendes, who was hired in 1997. He had previously worked at Hormel Foods Corporation and Dole Food Company. Mendez was very competitive and implemented the companywide philosophy of "bigger is better". This viewpoint was the corporate culture, and it had a significant impact on employees of DF. This aggressive company culture resulted in an emphasis on financial performance and some bold and very expensive acquisitions (e.g., Kettle and Pop-Secret). The most expensive acquisition was to be Pringles. DF was making this acquisition, so it could be a significant player in the very competitive snack foods space where it felt pressure for financial success and greater market share amid increasing industry competition.
In Fall of 2011, Mark Roberts, founder of the Off-Wall Street Consulting Group, received an anonymous call. For the fiscal year ending in July 2011, the caller indicated that DF was making ‘momentum payments’ to growers for walnuts delivered in September 2011. It appears that the approximately $60 million payments could be impacting the wrong fiscal year financial statements. Robert accused DF of incorrectly reporting its payments to suppliers on the company financial statements. DF denied any illegal actions, and they replied that the payments were on advance on the fiscal 2012 crop and had nothing to do with fiscal 2011. Unfortunately, the nut growers disagreed. They were told by the company to keep the money even if they were not going to provide crops for 2012. Supposedly, they were told that the payments were for the prior year.
Investigation into the situation ascertained that an additional approximately $20 million of ‘continuity payments’ were made by DF growers in fall 2010. Again, the question arose as to what fiscal year did these payments relate. Were the payments recorded in the proper year? Were the books cooked? Would the Pringles acquisition occur?
There are many accounting rules that may apply in this case. Discuss the rules that you believe may apply.
In what fiscal periods should fall 2010 and fall 2011 payments have been recorded in the DF income statements?
When was the cash paid to the growers? Was it a different period than when the payments were recorded?
How were the financial statements impacted in 2010 and 2011?
2. Were there any other things happening in the company that could have had a part in this?
3. How was this case of fraud found? Who found it? What are some steps that could have been taken that may have prevented this? What changes did this company make in order to prevent this from occurring again?
4. In the end, was the Pringles line acquired?
The accounting rules that may apply in this case include revenue recognition, accrual accounting, and the matching principle.
The fall 2010 and fall 2011 payments should have been recorded in the income statements of the corresponding fiscal periods when the services were provided or the goods were delivered. The cash paid to the growers may have occurred in a different period than when the payments were recorded. The financial statements of DF in 2010 and 2011 were likely impacted by the incorrect recording of payments, potentially leading to misstated financial results.
The case of fraud was discovered through an anonymous call to Mark Roberts, who raised concerns about the payments. Steps that could have been taken to prevent this include implementing stronger internal controls, conducting regular audits, and ensuring compliance with accounting principles. To prevent similar incidents, the company may have made changes such as improving financial oversight, enhancing transparency, and tightening the process for recording payments.
Learn more about revenue here:
https://brainly.com/question/28558536
#SPJ11
Maslow's Hierarchy of Needs Theory is an important and simple motivation tool for managers to understand and apply. Maslow suggests that we seek first to satisfy the lowest level of needs. Once this is done, we seek to satisfy each higher level of need until we have satisfied all five needs. Assess ways in which Maslow's Theory can be applied to workplace
Maslow's hierarchy of needs theory is an important and simple motivation tool for managers to understand and apply.
The theory can be applied to the workplace as follows:1. Physiological needs: This refers to basic necessities such as food, water, and shelter. In the workplace, managers can help employees satisfy their physiological needs by providing adequate pay, rest breaks, safe working conditions, and access to health care.2. Safety needs: This refers to the need for job security, financial stability, and protection from harm. Managers can provide job security and financial stability by offering benefits packages, retirement plans, and life insurance. They can also provide protection from harm by implementing safety protocols and providing appropriate equipment and training.3. Love and belonging needs: This refers to the need for social interaction, affection, and a sense of belonging. Managers can help employees satisfy this need by promoting teamwork, encouraging social activities, and creating a positive work environment.4. Esteem needs: This refers to the need for self-respect, recognition, and achievement. Managers can help employees satisfy this need by providing opportunities for career advancement, recognizing their achievements, and giving them feedback on their performance.5. Self-actualization needs: This refers to the need for personal growth, creativity, and self-fulfillment. Managers can help employees satisfy this need by providing opportunities for personal development, encouraging creativity, and supporting their career aspirations.In conclusion, Maslow's hierarchy of needs theory can be applied to the workplace by understanding the needs of employees and providing a work environment that helps them satisfy those needs. By doing so, managers can improve employee motivation, job satisfaction, and overall performance.
Learn more on hierarchy here:
brainly.com/question/30076090
#SPJ11
which of the following does not take place during the prenegotiation stage of multiparty negotiations? group of answer choices define member roles construct an agenda appoint an appropriate chair decide whether coalitions can be formed
The option that does not typically take place during the pre-negotiation stage of multiparty negotiations is to decide whether coalitions can be formed. Therefore, the correct answer is option D.
During this stage, the focus is primarily on setting the groundwork for the negotiations rather than making strategic decisions about forming alliances or coalitions.
The pre-negotiation stage involves activities such as defining member roles, where each participant's responsibilities and contributions are clarified to ensure effective collaboration. Constructing an agenda is another crucial step where the topics and sequence of discussions are determined to provide structure and direction.
Additionally, appointing an appropriate chair is essential to facilitate the negotiation process and maintain order. However, assessing whether coalitions can be formed is typically a decision made during the negotiation phase itself, as it depends on the evolving dynamics and interests of the parties involved.
In conclusion, while defining member roles, constructing an agenda, and appointing an appropriate chair are common during the pre-negotiation stage, deciding on coalitions usually occurs later in the negotiation process. Therefore, the correct answer is option D.
To know more about negotiations refer here:
https://brainly.com/question/29992333#
#SPJ11
Complete Question:
Which of the following does not take place during the pre-negotiation stage of multiparty negotiations?
group of answer choices
a) define member roles
b) construct an agenda
c) appoint an appropriate chair
d) decide whether coalitions can be formed
A bank wishes to decide how many staff to schedule during its lunch period. During this period customers arrive at a rate of 6 per hour and the enquiries that customers have (such as opening new accounts, arranging loans, etc.) take on average 20 minutes to deal with. The bank manager feels that 3 staff should be on duty during this period but wants to make sure that the customers do not wait more than 3 minutes on average before they are served.
The manager has been told by his small daughter that the distributions that describe both arrival and processing times are likely to be exponential. Therefore:
5.1
Calculate the utilization of the system where u = ra/ (re x m).
(6)
5.2
Using the formula for waiting time for an M/M/ m system, calculate the average waiting time.
(14)
In this scenario, the bank manager wants to determine the optimal number of staff to schedule during the lunch period to ensure efficient customer service. u = λa / (λe × m), where λa is the arrival rate, λe is the service rate, and m is the number of servers.
To calculate the utilization of the system, we need to determine the arrival rate (λa), service rate (λe), and the number of servers (m). In this case, the arrival rate is given as 6 customers per hour, and the service rate can be calculated as the reciprocal of the average service time, which is 1/20 (since the service time follows an exponential distribution). Therefore, λe = 1/20. The manager wants to schedule 3 staff members, so m = 3.
Using the formula for utilization, u = λa / (λe × m), we can substitute the values to calculate the utilization. The utilization in this case is (6 / (1/20 × 3)) = 120.
To calculate the average waiting time, we can use the formula for an M/M/m system, which is Wq = ρ / (m(1 - ρ)) × (1 / λa - 1 / λe), where ρ represents the traffic intensity (ρ = λa / (λe × m)).
By substituting the values into the formula, we can calculate the average waiting time (Wq). However, the value for ρ is already calculated as 120 in the previous step. Therefore, we can substitute the values into the formula and calculate the average waiting time.
Calculating the exact average waiting time requires the knowledge of the traffic intensity (ρ). However, the given information does not provide the exact value of ρ, so it is not possible to calculate the average waiting time in this scenario without additional information.
Learn more about scenario here:
https://brainly.com/question/30275614
#SPJ11
More spacious office at your new job rms produce potatoes and fish, and households buy potatoes and fish. The accompanying table ows the maximum annual output combinations of potatoes and fish that can be produced. Obviously, given their limited resources and available technology. as they use more of their sources for potato production, there are fewer resources available for catching fish. Maximum annual output options 4 A F Quantity of potatoes (pounds) 1,000 800 600 400 200 0 Quantity of fish (pounds) 0 300 500 600 650 675 Draw a production possibility frontier with potatoes on the horizontal axis and fish on the vertical axis illustrating these options, showing points A-F. I. If Winterfell produces no fish, what is the maximum potato production? II. Can Winterfell produce 500 pounds of fish and 800 pounds of potatoes? Explain. Where would this point lie relative to the production possibility frontier? Is this point efficient? TV. Suppose Winterfell is producing 200 potatoes and 200 fishes. Is this an efficient point? How many additional fish could they produce without giving up any potatoes? V. What is the opportunity cost of increasing the annual output of potatoes from 600 to 800 pounds? VI. What is the opportunity cost of increasing the annual output of potatoes from 200 to 400 pounds? VII. Can you infer about the shape of the PPF? (Hint: Find the per unit opportunity cost of Potatoes relative to fish/ Per unit opportunity cost of fish relative to potatoes) Explain what will happen to PPF in the following situations: VIII. IX. Following a period of discrimination against women and minorities, Winterfell legally ended such discrimination in the work place. X. Before the Battle of Winterfell, Winterfell was a full-employment of their resources, but during the war many of their facilities were bombed and people were killed. 5) The demand supply schedule (consider 52 weeks in a year) Price per bag 5 11) VD 6 DO C 8 10 for small bangs of potato chips in millions of bags per year is: Quantity supplied 70 90 Quantity demanded 160 150 140 130 120 110 110 130 150 170 What is the equilibrium price and quantity per week? How much excess demand or supply exists at a price 6 taka per bag? How much excess demand or supply exists at a price 10 taka per bag?
To draw the production possibility frontier (PPF), we'll use the information provided in the table:
Maximum annual output options:
A: 1,000 pounds of potatoes, 0 pounds of fish
B: 800 pounds of potatoes, 300 pounds of fish
C: 600 pounds of potatoes, 500 pounds of fish
D: 400 pounds of potatoes, 600 pounds of fish
E: 200 pounds of potatoes, 650 pounds of fish
F: 0 pounds of potatoes, 675 pounds of fish
Now, we can plot these points on a graph, with potatoes on the horizontal axis and fish on the vertical axis.
markdown
Copy code
Fish (pounds)
| F
| |
650| |
| | E
| | |
600| | |
| | |
| | D
500| | |
| | |
| | C
400| | |
| | |
| | B
300| | |
| | |
| |A
|___|_____|_____________________
0 200 400 600 800 1000
Potatoes (pounds)
I. If Winterfell produces no fish, the maximum potato production is 1,000 pounds (point A).
II. No, Winterfell cannot produce 500 pounds of fish and 800 pounds of potatoes. Point B represents the maximum combination of 800 pounds of potatoes and 300 pounds of fish. Any combination beyond point B lies outside the production possibility frontier and is not feasible given the available resources and technology.
III. If Winterfell is producing 200 potatoes and 200 fish (point E), it is an efficient point on the production possibility frontier. To produce more fish without giving up any potatoes, Winterfell can move along the production possibility frontier to the right until it reaches point D. At point D, they can produce 600 pounds of fish without sacrificing any potatoes.
IV. The opportunity cost of increasing the annual output of potatoes from 600 to 800 pounds is the fish that must be given up. From the graph, we can see that the increase in potatoes (200 pounds) corresponds to a decrease in fish (50 pounds), as we move from point C to point B. Therefore, the opportunity cost is 50 pounds of fish.
V. The opportunity cost of increasing the annual output of potatoes from 200 to 400 pounds is the fish that must be given up. From the graph, we can see that the increase in potatoes (200 pounds) corresponds to a decrease in fish (100 pounds), as we move from point E to point D. Therefore, the opportunity cost is 100 pounds of fish.
VI. From the PPF graph, we can observe that the per unit opportunity cost of potatoes relative to fish increases as we move from left to right along the frontier. This suggests that resources are not equally efficient in producing both goods. The shape of the PPF indicates that there is increasing opportunity cost associated with producing additional units of potatoes or fish.
VII. The shape of the PPF is concave (curved inward). This is because of the increasing opportunity cost mentioned above. As Winterfell produces more of one good, it needs to give up increasingly larger amounts of the other good. This reflects the concept of diminishing marginal returns, where resources become less suitable for producing alternative goods.
VIII. Following the end of discrimination, it is likely that Winterfell's workforce will become more diverse, potentially bringing in new skills and perspectives. This could lead to an increase in productivity
To know more about production possibility frontier click this link -
brainly.com/question/30159656
#SPJ11
What are the major provisions of the DMCA? What is plagiarism
and reverse engineering? Differentiate between them. When is it
okay to use each of them? kindly could you please explain each
question
The Digital Millennium Copyright Act (DMCA) is a copyright law in the United States that criminalizes the unauthorized access of copyrighted works. The provisions of the DMCA are as follows: The DMCA establishes a legal framework for the creation of digital copyright protection technologies.
The DMCA criminalizes the circumvention of these technologies.3. The DMCA provides a framework for service providers to respond to complaints of copyright infringement.4. The DMCA provides legal protection for service providers that comply with its notice and takedown provisions. Plagiarism is the act of using someone else's work and presenting it as one's own. It is a serious ethical and legal issue in academia and journalism, among other fields.Reverse engineering is the process of analyzing a product or system to understand how it works, often with the goal of creating a copy or improving it.
It is often used in engineering, software development, and product design. The main difference between plagiarism and reverse engineering is that plagiarism involves copying someone else's work without permission or attribution, while reverse engineering involves analyzing and understanding a product or system to create something new or to improve upon it.When it comes to plagiarism, it is never okay to use someone else's work without proper attribution and permission. It is always important to give credit where credit is due. Reverse engineering, on the other hand, can be okay in certain circumstances, such as when creating a new product that is based on an existing one or when improving upon an existing system.
To know more about Digital Millennium Copyright visit :
https://brainly.com/question/31712317
#SPJ11
Consider the process of manufacturing Tesla cars. Name one financial metric, one external metric, and one internal metric for this process Financial: …………………….. External: …………………….. Internal: ……………………..
The manufacturing process of Tesla cars includes several metrics, financial, internal, and external metrics. Here's what each of them means: Financial metric: This metric is related to the financial aspects of the manufacturing process. One such financial metric for the process of manufacturing Tesla cars is the Cost of Goods Sold (COGS).
It is a metric that measures the cost of the raw materials and labor needed to manufacture the cars. To calculate the COGS for Tesla, one must subtract the cost of goods sold from the revenue generated from selling the car. External metric: The external metric is related to external stakeholders such as customers, competitors, and regulators. One such external metric for the process of manufacturing Tesla cars is the market share.
It is a metric that measures the percentage of the total market that Tesla captures. A high market share indicates that Tesla has a strong presence in the market and is a leader in the industry.
In conclusion, the financial metric of the manufacturing process of Tesla cars is the Cost of Goods Sold (COGS), the external metric is the market share, and the internal metric is the employee productivity rate.
To know more about Tesla visit:-
https://brainly.com/question/32524758
#SPJ11
Arabian Gulf Corporation reports the following stockholders' equity section on December 31, 2020 - Common stock; $10 par value; 500,000 shares authorized; 200,000 shares issued and outstanding $ 2,000,000 - Paid in capital in excess of par value, common stock - Retained earnings... 400,000 900,000 Total $3,300,000 The Corporation completed the following transactions in 2021. 1-Jan 10, Directors declared a $1 per share cash dividend payable on March 15 to the Jan 31 stockholders of record 2- Mar 01, Purchased 10,000 shares of its own common for $15 per share. 3- Mar 15, Paid the cash dividend declared on Jan. 10. 4- May 01, Sold 6,000 of its treasury shares at $15 cash per share. 5- Sep 30, Directors declared a 30% stock dividend when the share market price is $16. 6- Nov 01, Distributed stock dividends declared on Sep. 30. 7- Nov 15, The company implemented 5-for-1 stock split for the common stock. Required: Prepare journal entries to record each of these transactions for 2021.
To record the transactions for 2021 in Arabian Gulf Corporation's stockholders' equity section, the following journal entries need to be prepared:
Jan 10 - Declaration of Cash Dividend:
Date: Jan 10
Debit: Retained Earnings ($1 x 200,000 shares)
Credit: Dividends Payable ($1 x 200,000 shares)
Mar 01 - Purchase of Treasury Shares:
Date: Mar 01
Debit: Treasury Stock (10,000 shares x $15)
Credit: Cash (10,000 shares x $15)
Mar 15 - Payment of Cash Dividend:
Date: Mar 15
Debit: Dividends Payable
Credit: Cash
May 01 - Sale of Treasury Shares:
Date: May 01
Debit: Cash (6,000 shares x $15)
Credit: Treasury Stock (6,000 shares x cost per share)
Credit: Paid-in Capital - Excess of Par Value
Sep 30 - Declaration of Stock Dividend:
Date: Sep 30
Debit: Retained Earnings (30% x market price x 200,000 shares)
Credit: Common Stock Dividends Distributable (30% x market price x 200,000 shares)
Nov 01 - Distribution of Stock Dividends:
Date: Nov 01
Debit: Common Stock Dividends Distributable
Credit: Common Stock
Nov 15 - Stock Split:
Date: Nov 15
Debit: Common Stock
Credit: Common Stock Dividends Distributable
Note: The journal entries for transactions 5, 6, and 7 may vary depending on the specific accounting treatment chosen for stock dividends and stock splits. This response assumes the distribution of stock dividends from the common stock dividends distributable account and the adjustment of common stock due to the stock split.
It is important to consult with an accounting professional or refer to the company's specific accounting policies and guidelines to ensure accurate recording of these transactions.
To know more about journal entries click this link -
brainly.com/question/20421012
#SPJ11
Northeastern Heath is a regional medical center. They tle pricing of services and profits to specific services in the medical center Northeastern Health Usos control system Multiple Choice Conce dan feedforward
Northeastern Health, a regional medical center, uses a control system that incorporates both feedback and feedforward mechanisms to manage pricing of services and optimize profits.
Northeastern Health employs a control system that integrates feedback and feedforward mechanisms to effectively manage pricing of services and maximize profits. Feedback control involves monitoring and evaluating the performance of the medical center's services and making adjustments based on the information received. This allows Northeastern Health to assess the effectiveness of their pricing strategies and make necessary modifications to ensure optimal financial outcomes.
On the other hand, feedforward control focuses on proactive measures to anticipate and prevent potential issues before they occur. Northeastern Health utilizes feedforward control by analyzing market trends, competition, and patient demands to set pricing strategies that align with the specific services offered. This approach allows the medical center to proactively address potential challenges and capitalize on opportunities to enhance profitability.
By employing both feedback and feedforward control mechanisms, Northeastern Health can continuously assess the pricing of their services, make necessary adjustments based on market conditions and customer needs, and optimize profits. This comprehensive control system helps ensure that Northeastern Health remains competitive and financially sustainable in the dynamic healthcare industry.
Learn more about pricing strategies here:
https://brainly.com/question/28295582
#SPJ11
Qn.1 How is the "Function of management" relevant to the importance of organisational success? with more than 400 words
Qn.,2 What are the most significant elements relating to Function of management? with more than 500 words and a creative answer please
The resources of production (people, equipment, and materials, as well as money) cannot be turned into goods or services without effective management. Therefore, management is a crucial task that deals with every facet of how an organisation operates.
In order to achieve desired goals through collective activity, management is required. Planning, organising, staffing, leading, and controlling are the five general functions that make up management at its most basic level.
These five responsibilities are a part of a corpus of guidelines and management-related beliefs. It aids in achieving group objectives. In order to accomplish goals, it arranges the production components, assembles and organises the resources, and integrates the resources in a useful way.
To learn more about production, click here.
https://brainly.com/question/30333196
#SPJ4
You have been asked by the president of the Farr Construction Company to evaluate the proposed acquisition of a new earth mover. The mover's basic price is $220,000, and it would cost another $30,000 to modify it for special use. Assume that the mover falls into the MACRS 5-year class, it would be sold after 4 years for $60,000, and it would require an increase in net operating working capital (spare parts inventory) of $10,000. The earth mover would have no effect on revenues, but it is expected to save the firm $52,000 per year in before-tax operating costs, mainly labor. The firm's marginal federal-plus-state tax rate is 25 percent and the project's cost of capital is 10 percent.
Evaluate the project using the NPV rule and the IRR rule.
To evaluate the project using the NPV rule and the IRR rule, we need to calculate the net cash flows for each year, discount them to their present value, and then apply the respective rules.
First, let's calculate the net cash flows:
Year 0:
Initial investment = -$220,000 (basic price) - $30,000 (modification cost) + $10,000 (increase in working capital) = -$240,000
Years 1-4:
Net cash flow = Savings in operating costs - Tax on savings
Net cash flow = $52,000 - ($52,000 * 0.25) = $39,000 (after-tax cash flow)
Year 5:
Net cash flow = Salvage value - Tax on salvage value
Net cash flow = $60,000 - ($60,000 - $30,000) * 0.25 = $45,000 (after-tax cash flow)
Now, let's calculate the present value of the net cash flows using the project's cost of capital of 10%:
PV (Year 0) = -$240,000 / (1 + 0.10)^0 = -$240,000
PV (Years 1-4) = $39,000 / (1 + 0.10)^1 + $39,000 / (1 + 0.10)^2 + $39,000 / (1 + 0.10)^3 + $39,000 / (1 + 0.10)^4 = $134,095.04
PV (Year 5) = $45,000 / (1 + 0.10)^5 = $28,598.74
Next, let's calculate the net present value (NPV) by summing up the present values of the net cash flows:
NPV = PV (Year 0) + PV (Years 1-4) + PV (Year 5) = -$240,000 + $134,095.04 + $28,598.74 = -$77,306.22
To evaluate the project using the IRR rule, we can use a financial calculator or spreadsheet to find the internal rate of return (IRR). The IRR is the discount rate that makes the NPV of the project equal to zero.
Using a financial calculator or spreadsheet, the IRR for this project is approximately 8.92%.
Based on the NPV rule, since the NPV is negative (-$77,306.22), the project would be considered unattractive. It does not generate sufficient returns to cover the initial investment and provide a positive net present value.
Based on the IRR rule, the project's IRR of 8.92% is lower than the cost of capital (10%). Therefore, the project would also be considered unattractive using the IRR rule.
Overall, based on both the NPV rule and the IRR rule, the proposed acquisition of the new earth mover would not be recommended.
Learn more about the NPV rule here:
brainly.com/question/29489469
#SPJ11
Which of the following statements regarding P/E multiple is NOT correct?
A firm with lower risk is likely to have a high P/E multiple than a firm with higher risk.
A stock with a low P/E multiple indicates that the stock is undervalued.
A firm’s high P/E multiple may be attributed to a temporary increase in its EPS.
All three statements are not correct.
All three statements are not correct.
A firm with lower risk is likely to have a low P/E multiple than a firm with higher risk. Generally, investors are willing to pay a higher P/E multiple for companies with higher growth potential and higher risk.
A stock with a low P/E multiple indicates that the stock may be undervalued. A low P/E ratio suggests that the stock is trading at a lower price relative to its earnings and could potentially be a good investment opportunity.
A firm's high P/E multiple is typically attributed to a sustained increase in its earnings per share (EPS) over time. A temporary increase in EPS would not be the primary reason for a high P/E multiple.
Therefore, the statement that is NOT correct is: A firm's high P/E multiple may be attributed to a temporary increase in its EPS.
To know more about earnings per share please visit:
brainly.com/question/32572062
#SPJ11
This is a consumer behavior question
You are what you buy
explain this statement in details
The statement "You are what you buy" suggests that a person's purchases reflect their values, preferences, and identity. It implies that consumer behavior and purchase choices can be indicative of an individual's personality, lifestyle, and aspirations.
The statement "You are what you buy" highlights the idea that consumer behavior is influenced by personal values, desires, and self-expression. What people choose to buy reflects their preferences, interests, and lifestyle. For example, someone who frequently purchases organic and sustainable products may prioritize health and environmental consciousness. On the other hand, a person who consistently buys luxury brands may seek status and exclusivity.
Consumer behavior is also shaped by the desire to construct and communicate one's identity. People often use products and brands to express who they are and how they want to be perceived by others. By purchasing items that align with their self-image and aspirations, individuals can reinforce their sense of identity and belonging.
However, it's important to note that consumer behavior is complex and influenced by various factors beyond personal identity. Social, cultural, economic, and situational factors all play a role in shaping purchase decisions. While consumer choices can provide insights into an individual's values and preferences, it's essential to consider a broader range of influences to fully understand consumer behavior and its implications.
Learn more about consumer : brainly.com/question/27773546
#SPJ11
Which KPI field should you add to a PivotTable if you want to display the KPI icon? Status Goal. Value Measure. Where do you create KPI's in the Data Model? By selecting Create KPI from the Diagram View. By right-clicking on the base value (measure) in the calculation area and selecting Create KPI. By right-clicking on the column name on the Data View and selecting Create KPI. By right-clicking on the base value (measure) on the Pivot Table and selecting Create KPI.
To display the KPI icon in a PivotTable, the "Status" field should be added. KPIs are created in the Data Model by right-clicking on the base value (measure) in the calculation area and selecting "Create KPI."
To display the KPI icon in a PivotTable, you need to add the "Status" field to the PivotTable. The "Status" field represents the status of the Key Performance Indicator (KPI) and determines which icon will be displayed for each value. When creating KPIs in the Data Model, you do so by right-clicking on the base value (measure) in the calculation area. The calculation area is where you define the measures and calculations for the PivotTable. By right-clicking on the base value and selecting "Create KPI," you can define the KPI's target value, actual value, and other parameters to set up the KPI.
Creating KPIs from the Diagram View, column names in the Data View, or base values on the PivotTable do not provide the specific functionality to create KPIs. The correct method is to right-click on the base value (measure) in the calculation area of the Data Model.
Learn more about KPI from here:
https://brainly.com/question/30543221
#SPJ11
At the end of the term, each class member is responsible to submit a paper which summarizes their current thinking on leadership and themselves as a leader. Included should be at least: (1) the identification of and rationale for the person's 2 of 5" most influential leadership strengths; (2) reflections regarding possible 'fatal flaws'; (3) discussion of at least three influential assessments (Leader's Self-Insights) completed during the class; (4) other important "lessons learned." Papers are to be well- written (no obvious errors) and no longer than three single-spaced pages in length." - your opinion of your 2 of 5 - of course, using the You are simply reporting on what you've learned in each of these four areas - "Fundamental Five" roles; your ideas on possible fatal flaws you personally may need to improve in; thoughts about results of the "Leader's Self-Insight" exercises I referred you to in the Online Lectures [though you can use any of the many that are included in the textbook]; and any other ideas you have about leadership "lessons learned." I believe a careful reading of the assignment should make things clear.
The paper should include the identification and rationale for two influential leadership strengths, reflections on possible fatal flaws, completed during the class, and other important lessons learned.
The assignment provides an opportunity for class members to reflect on their understanding of leadership and their own leadership abilities. Each person is required to identify and explain two of their most influential leadership strengths, providing a rationale for their choices. Reflecting on possible fatal flaws allows individuals to critically assess areas where they may need improvement in their leadership style or behavior.
The discussion of at least three influential assessments completed during the class encourages class members to reflect on their self-insights and the feedback received through the assessments. These assessments may provide valuable information about their leadership strengths, weaknesses, and areas for growth.
The assignment also encourages class members to share any other important lessons learned throughout the course. This allows individuals to integrate their knowledge and experiences, providing a comprehensive understanding of leadership and personal growth as a leader.
Overall, the assignment serves as a platform for class members to synthesize their understanding of leadership, evaluate their own leadership abilities, and reflect on their growth throughout the course. It promotes self-reflection, critical thinking, and the application of learned concepts in the context of leadership development.
Learn more about leadership, below:
https://brainly.com/question/32010814
#SPJ11
When applying the co-terminated assumption: A study period equal to the minimum common multiple of the lives of the two alternatives is selected and used to evaluate both alternatives Each alternative is evaluated with its own study period which is equal to its life time A study period equal to the average of the life times of both alternatives is selected to be able to compare them with economic equivalence methods O A study period equal to the life of one of the alternatives is selected, and the life of the other alternative is adjusted to the same study period
When applying the co-terminated assumption, the correct option is: B) Each alternative is evaluated with its own study period which is equal to its lifetime.
The co-terminated assumption assumes that each alternative being evaluated has its own specific study period equal to its expected lifetime. This means that the analysis for each alternative is conducted over a period of time that corresponds to the projected lifespan of that alternative.
By using the co-terminated assumption, the evaluation can capture the full economic impact of each alternative over its entire lifespan. This allows for a fair comparison between the alternatives based on their individual costs, benefits, and cash flows.
It is important to note that using different study periods for each alternative allows for a more accurate assessment of their economic performance and facilitates decision-making based on the unique characteristics and lifespan of each option.
Learn more about assumption here
https://brainly.com/question/4636114
#SPJ11
Explain how U.S. multinational companies (MNCs) differ from European multinational companies (MNCs) in term of control. And give evidence not less than 250 words. ( control of the companies on employees, thank you)
U.S. multinational companies (MNCs) tend to have a centralized control approach, while European MNCs emphasize decentralized control in managing their employees.
U.S. multinational companies (MNCs) typically adopt a more centralized control approach in managing their employees. Centralized control means decision-making authority and power are concentrated at the corporate headquarters, with standardized policies and procedures being enforced across subsidiaries and branches. This allows for consistency in operations, branding, and overall strategic direction. Evidence supporting this can be seen in the practices of U.S. companies like Walmart, McDonald's, and Coca-Cola, which maintain strong control over their global operations, including employee management.
On the other hand, European multinational companies (MNCs) often prioritize decentralized control in managing their employees. Decentralized control grants subsidiaries and local units greater autonomy in decision-making, including human resource management practices. European MNCs value adapting to local contexts, fostering employee participation, and tailoring strategies to specific markets. Examples of European companies, such as Volkswagen, Siemens, and Unilever, showcase the decentralization approach where subsidiaries have significant authority over employee-related matters.
This difference in control approaches can be attributed to cultural, historical, and institutional factors. The U.S. has a strong corporate culture with a focus on efficiency and uniformity, whereas European countries have diverse cultural and institutional backgrounds that value local autonomy and employee participation. Additionally, European labor laws and works councils play a role in empowering employees and facilitating decentralized decision-making.
Overall, while U.S. MNCs tend to adopt centralized control for consistency and efficiency, European MNCs emphasize decentralized control to accommodate local contexts and foster employee involvement in decision-making.
Learn more about subsidiaries here:
https://brainly.com/question/31367468
#SPJ11
(Loss on issue of debentures: Fixed instalment method) X Ltd. issues $. 10,000 9% Debentures at par repayable at the end of four years at 10% premium. Show the Loss on Issue of Debentures Account in the ledger for the period.
Loss on issue of debentures: Fixed installment method refers to an accounting technique that results in the creation of a reserve account that can be used to record the loss resulting from the difference between the sale price of debentures and their face value..
This method is used by companies that need to issue debentures in order to raise capital and are required to comply with accounting regulations that require the recognition of the loss resulting from the sale of the debentures.The following journal entry can be used to record the issue of debentures:DebitCash Account10,000CreditDebenture Account10,000The next step is to calculate the total amount of loss that is incurred by the company as a result of the issue of debentures.
The loss is calculated by taking the difference between the sale price of the debentures and their face value.Loss = Sale Price - Face ValueThe face value of the debentures is $10,000 and the sale price is $11,000 (which is the face value plus the 10% premium). Therefore, the loss is $1,000.The journal entry to record the loss on the issue of debentures account is as follows:DebitLoss on Issue of Debentures Account1,000CreditDebenture Account1,000The above entry will be made in the books of accounts for the period to show the Loss on Issue of Debentures Account in the ledger for the period. The loss is created due to the difference between the face value of the debentures and their sale price, which is recorded as a reserve account that can be used to cover the loss if required. This method is preferred by companies that need to comply with accounting regulations that require the recognition of the loss resulting from the sale of the debentures.
To know more about installment visit:
https://brainly.com/question/22622124
#SPJ11
A company reports current assets of $6,572 and current
liabilities of $2,786. Calculate the current ratio. Round
your
answer to two decimal places.
The current ratio is a financial metric used to assess a company's short-term liquidity and its ability to meet its current obligations. It measures the relationship between a company's current assets and current liabilities.
In the given scenario, the current assets are $6,572 and the current liabilities are $2,786. By dividing the current assets by the current liabilities, we can calculate the current ratio. A current ratio of 2.36 indicates that the company has $2.36 in current assets for every dollar of current liabilities. This means that the company is in a favorable position to meet its short-term financial obligations. Generally, a current ratio above 1 is considered healthy, as it suggests that the company has sufficient assets to cover its short-term liabilities.
Learn more about company's here;
https://brainly.com/question/30532251
#SPJ11
Crane Enterprises is considering manufacturing a new product. It projects the cost of direct materials and rent for a range of output as shown below. Output Rent in Units Expense $7,235 7,235 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000 11,576 11,576 11,576 11,576 11,576 11,576 14,470 14,470 14,470 Direct Materials $5,788 8,700 8,700 11,600 14,500 17,400 20,300 23,200 42,397 50,645 63,668 Your answer has been saved. See score details after the due date. Determine the relevant range of activity for this product. The relevant range of activity for this product (c) Your answer has been saved. See score details after the due date. 3,000-8,000 Variable costs per unit per unit (d) Calculate the variable costs per unit within the relevant range. (Round answer to 2 decimal places e.g. 2.25.) V 2.90 units. Attempts: 1 of 1 used Attempts: 1 of 1 used
Based on the given information, we can determine the relevant range of activity for this product by looking at the range of output levels where the costs are provided.
In this case, the relevant range is from 3,000 units to 8,000 units.
To calculate the variable costs per unit within the relevant range, we need to find the change in total variable costs divided by the change in output units within that range.
Change in total variable costs = $23,200 - $8,700 = $14,500
Change in output units = 8,000 - 3,000 = 5,000
Variable costs per unit = Change in total variable costs / Change in output units
Variable costs per unit = $14,500 / 5,000
Variable costs per unit ≈ $2.90
Therefore, within the relevant range of activity (3,000 to 8,000 units), the variable costs per unit for this product are approximately $2.90.
Learn more about Variable Costs here -: brainly.com/question/5965421
#SPJ11
List and briefly describe the nine broad banking services.
There are nine broad banking services that financial institutions typically provide to their customers. These services cater to various financial needs and play a crucial role in the economy .
Here's a brief description of each:
1. Deposit Services: Banks accept deposits from individuals and businesses, allowing them to securely store their money. These deposits can be in the form of savings accounts, checking accounts, or certificates of deposit (CDs).
2. Loans and Credit Services: Banks provide loans and credit to individuals and businesses, helping them finance various needs such as home purchases, education, business expansion, and more. These services often involve interest rates and repayment terms.
3. Payment Services: Banks facilitate the movement of funds through payment services, including issuing checks, electronic funds transfers (EFTs), debit cards, credit cards, and online payment systems.
4. Foreign Exchange Services: Banks offer currency exchange services, allowing customers to convert their funds between different currencies for international travel, trade, or investment purposes.
5. Investment Services: Banks provide investment products such as mutual funds, stocks, bonds, and other securities. They may also offer investment advisory services to assist customers in making informed investment decisions.
6. Asset Management Services: Banks can manage and administer assets on behalf of individuals or institutional clients. This includes services like portfolio management, estate planning, trust management, and retirement planning.
7. Insurance Services: Many banks offer insurance products such as life insurance, health insurance, property insurance, and other related services to help individuals and businesses protect their assets and manage risk.
8. Financial Advisory Services: Banks provide financial advice and consultation to clients, helping them make informed decisions regarding financial planning, wealth management, retirement planning, and other financial matters.
9. Electronic Banking Services: With the rise of technology, banks offer various electronic banking services, including online banking, mobile banking, and digital wallets. These services enable customers to access and manage their accounts conveniently.
It's important to note that while these services are commonly offered by banks, the availability and specifics may vary depending on the institution and its policies.
Learn more about economy here:
https://brainly.com/question/30131108
#SPJ11
based on the information in this case, would you say that netflix primarily uses content-based filtering, collaborative filtering, or both? describe your answer.
Based on the information provided in this case, Netflix primarily uses collaborative filtering.What is Collaborative Filtering?Collaborative filtering is an algorithmic technique used by recommender systems. It is used to provide users with recommendations based on their past behavior, likes, and dislikes, as well as similar actions taken by other users.In other words, the algorithm is based on the principle that people who agreed on something in the past are likely to agree on something again in the future. As a result, Netflix relies on data collected from other users, analyzing what people watch, what they rate highly, and what they share to provide personalized recommendations to each of its subscribers.In contrast, content-based filtering depends on analyzing the properties of an item and recommending items with similar properties. For example, it might suggest movies with similar genres or directors based on what you’ve watched before. Netflix may use this technique to some extent, but it is less prevalent in the platform's recommendation algorithm because it is more challenging to implement.
For more question like Netflix visit the link below:
https://brainly.com/question/10043488
#SPJ11
Due to the severity of COVID 19 on households, the government of Australia announced Job Keeper Allowances to be given to the labour force that had lost employment. a. Examine the impact of Job Keeper Allowances during the COVID 19 recession on Australia's economy
The Job Keeper Allowances implemented by the government of Australia during the COVID-19 recession had a significant impact on the country's economy.
The Job Keeper Allowances played a crucial role in providing support to the labor force that had lost employment due to the pandemic. By providing financial assistance to affected individuals, the government aimed to mitigate the economic impact of the recession and prevent a more severe downturn.
During the COVID-19 recession, many businesses faced closures and layoffs, leading to a sharp increase in unemployment rates. The Job Keeper Allowances helped to stabilize household incomes and maintain consumer spending to some extent. This financial support provided a lifeline for individuals and their families, reducing the adverse effects of unemployment on their well-being and living standards. It also helped to prevent a larger decline in aggregate demand, supporting businesses and preventing a more severe contraction in economic activity. By supporting the labor force and maintaining household incomes, the Job Keeper Allowances played a crucial role in cushioning the negative impact of the recession and aiding the overall recovery process.
learn more about covid here:brainly.com/question/30785207
#SPJ11
Question 9
Proposition 13, enacted in 1977, reflected California voters' desire to
a. reject gun control laws
b. reduce emissions from automobiles
c. cut property taxes in the state
d. reduce funding for state universities
Question 10
By the end of the 1970s, California's financial picture was darkened due to all of the following except:
a. reduced defense spending after the end of the Vietnam war.
b. OPEC's raise in oil prices causing an "energy crisis".
c. taxpayer revolts like Prop. 13
d. a reduction in emissions from newly purchased automobiles.
The correct answer of Q9 and Q10 is (a) and (b).
Energy conservation refers to the act of conserving energy by practicing efficient energy utilization, avoiding wastage, and reducing energy use. OPEC's raise in oil prices caused an "energy crisis."
Energy conservation refers to the act of conserving energy by practicing efficient energy utilization, avoiding wastage, and reducing energy use. It is about decreasing energy consumption while still enjoying the same level of service. This can be done through various methods such as reducing energy use, lowering consumption, or using more efficient technology.OPEC's raise in oil prices caused an "energy crisis." The OPEC oil embargo of 1973 caused a global economic and political crisis that lasted until the early 1980s. This occurred when OPEC, a group of oil-producing nations, stopped selling oil to countries that supported Israel in the Yom Kippur War, causing prices to skyrocket and energy supplies to be reduced worldwide. The increase in oil prices caused inflation, a decline in economic growth, and a decrease in the standard of living. As a result, many people began to seek ways to conserve energy and reduce consumption to avoid high energy costs. This led to the development of more energy-efficient products, such as cars, appliances, and lighting, and the implementation of energy-saving measures. These efforts resulted in a more sustainable and efficient use of energy and a reduction in dependence on fossil fuels, reducing the effects of the energy crisis in the long run.The reduction in emissions from newly purchased automobiles is another way to reduce energy consumption. This can be achieved by using electric cars, hybrid cars, or fuel-efficient cars that use less gasoline and produce fewer emissions. These cars use advanced technologies such as regenerative braking, which converts the car's kinetic energy into electricity and stores it in the battery. This reduces the amount of energy required to power the car and reduces emissions. Additionally, many countries have implemented emissions standards for vehicles to reduce the amount of pollutants released into the environment, which has resulted in cleaner air and a healthier environment.For such more questions on environment
https://brainly.com/question/30194704
#SPJ8
Net income is $50,000. Average assets are $1,000,000. Average owners' equity is $800,000. Solve for return on assets. Answer: I
The return on assets (ROA) can be calculated using the formula: ROA = Net Income / Average Total Assets. With a net income of $50,000 and average assets of $1,000,000, we can solve for the return on assets.
Return on assets (ROA) is a financial ratio that measures a company's profitability in relation to its total assets. It indicates how effectively a company generates profits from its investments in assets. To calculate ROA, we divide the net income by the average total assets.
In this case, with a net income of $50,000 and average assets of $1,000,000, the calculation would be: ROA = $50,000 / $1,000,000 = 0.05 or 5%. Therefore, the return on assets for this company is 5%. This means that for every dollar of assets, the company generates 5 cents of net income.
learn more about equity click here;
https://brainly.com/question/31458166
#SPJ11
Because it is worried about inflation in the near term, the government has decided to restrict aggregate demand. Which tool of fiscal policy (or combination) do you believe it should use: government purchases, taxes, or transfers? Why?
What should government do to avoid another Great Recession like the last one during 2007-09 period? What policies have been undertaken? Are they adequate?
Do you think monetary or fiscal policy is likely to be the more effective tool of stabilization policy? Why?
To restrict aggregate demand, the government can use any combination of fiscal policies such as government purchases, taxes, or transfers. All three of these tools have their own benefits and drawbacks. However, to ensure that aggregate demand is limited and inflation is avoided, the government may opt for a combination of these tools rather than only relying on a single policy tool. To decide which tool or combination of tools to use, the government will analyze their pros and cons and select the one that is best suited to their economic conditions.
To avoid another Great Recession like the one that occurred during the 2007-09 period, governments must adopt policies that will stimulate the economy and promote growth. To accomplish this goal, governments can use a variety of policies, including fiscal, monetary, and regulatory policies. In addition to these policies, governments can also support infrastructure development, promote job creation, and improve access to education and training programs. The policies that have been undertaken so far have been adequate in stabilizing the economy, but they must be continually reviewed and adjusted as economic conditions change.
Fiscal policy and monetary policy are both effective tools of stabilization policy, but each has its own advantages and disadvantages. Fiscal policy is the use of government spending and taxation to stabilize the economy. Fiscal policy is effective in promoting economic growth and job creation, but it can also lead to inflation and budget deficits. Monetary policy, on the other hand, is the use of interest rates and money supply to stabilize the economy. Monetary policy is effective in controlling inflation and stabilizing the economy, but it can also lead to deflation and recession. Therefore, to stabilize the economy effectively, it is necessary to use a combination of both monetary and fiscal policies.
To know more about aggregate demand visit:
https://brainly.com/question/32462329
#SPJ11
5.50% For 92 Days From A Multinational Company. With 61 Remaining Days To Maturity, Bank AB Sells The Deposit To Bank AA At 8.75%. Calculate The Secondary Price Of The Certificate Of Deposit. Use 360 Days Per Year.
Bank AB accepts a spot deposit for Php 1,000,000.00 at 5.50% for 92 days from a multinational company. With 61 remaining days to maturity, Bank AB sells the deposit to Bank AA at 8.75%. Calculate the secondary price of the certificate of deposit. Use 360 days per year.
Bank AB initially accepts a spot deposit of Php 1,000,000.00 from a multinational company at an interest rate of 5.50% for 92 days. The secondary price of the certificate of deposit is Php 1,015,347.22
To calculate the secondary price of the certificate of deposit, we need to consider the time remaining until maturity and the interest rates involved.
First, we calculate the interest earned by Bank AB during the initial holding period of 92 days:
Interest Earned by Bank AB = Principal * Interest Rate * Time
= Php 1,000,000.00 * 5.50% * (92/360)
= Php 14,444.44
Next, we determine the remaining interest to be earned during the remaining 61 days until maturity:
Remaining Interest = Principal * Interest Rate * Time
= Php 1,000,000.00 * 8.75% * (61/360)
= Php 15,347.22
The secondary price of the certificate of deposit is the sum of the remaining interest and the initial principal:
Secondary Price = Principal + Remaining Interest
= Php 1,000,000.00 + Php 15,347.22
= Php 1,015,347.22
Therefore, the secondary price of the certificate of deposit is Php 1,015,347.22.
Learn more about certificate of deposit here:
https://brainly.com/question/29620073
#SPJ11
Diana and Jim enter into a written contract under which Diana will sell Jim some of her rare comic books for $300. The contract contains a list of each comic book that is supposed to be part of the sale. The contract states that it contains the complete and final agreement reached by Diana and Jim. When Jim receives the comics, he is upset to find out that Diana did not include a particular Superman comic. He sues Diana, stating that even though the written contract does not mention that particular Superman issue, he and Diana had orally agreed, just before the contract was written, that she would include the Superman in the deal. Jim wants to submit evidence of their prior oral agreement. Diana argues that such evidence would violate the parol evidence rule. 1. Does this contract have the necessary element of consideration (Chapter 14)? 2. If so, discuss the benefit received by each party and the detriment suffered by each party? In other words, what is each party receiving and what is each party given up? 3. Is this contract enforceable or would it be illegal or violate public policy to enforce this contract (Chapter 15)? 4. Is this the type of contract that falls within the Statute of Frauds (Chapter 16)? 5. Will Jim be allowed to introduce parol evidence to show the party's prior oral agreement before the contract was made (Chapter 16)?
The contract between Diana and Jim involves the sale of rare comic books for $300. Jim claims an oral agreement for a particular Superman comic, while Diana argues against admitting parol evidence violating the parol evidence rule.
The contract has consideration as Jim pays $300 for the rare comic books, benefiting him with the acquisition and Diana with the payment.
This contract appears enforceable, without indications of illegality or violation of public policy.
It is advisable to check the specific jurisdiction's laws regarding the Statute of Frauds, as contracts for the sale of goods over a certain value may require a written agreement.
Jim may be allowed to introduce parol evidence if it falls within an exception to the parol evidence rule, such as proving fraud, mistake, or ambiguity. The admissibility of parol evidence would depend on the specific jurisdiction's laws and applicable case law.
Learn more about contract law here: brainly.com/question/32735711
#SPJ11
