Answer:
Polar
Explanation:
Electronegativity Difference:
0.7 Non-Polar Covalent = 0 0 < Polar Covalent < 2 Ionic (Non-Covalent) ≥ 2
Give the systematic name for PbO2
The systematic name for PbO₂ is lead dioxide.Therefore, the correct option is A.
What are systematic names?Systematic names are a type of chemical nomenclature that follow a systematic set of rules to name chemical compounds. Lead dioxide (PbO₂) is a chemical compound composed of lead and oxygen. It is an oxide of lead and can also be called lead(IV) oxide.
The systematic name of the compound is derived by using the root word of the metal, “lead,” and adding the suffix “-dioxide” to indicate the two oxygen atoms. Thus, the systematic name for PbO₂ is lead-dioxide.Therefore, the correct option is A.
Learn more about systematic names, here:
https://brainly.com/question/28295883
#SPJ2
The question is incomplete, but most probably the complete question is,
Give the systematic name for PbO₂?
A. Lead dioxide
B. Lead trioxide
C. Lead oxide
D. Lead azide
Método científico: El trabajo científico se caracteriza por ser planificado, con objetivos iniciales y que habitualmente se dan en un cierto orden.1) Indica cuáles son los pasos del método científico explicando brevemente cada uno de ellos.2) Los siguientes son dos modelos : *Un estudiante pensando en la competencia, desarrolla un proyecto en el sótano de su casa. *Un grupo de personas con diferentes aptitudes cooperan para resolver un problema. ¿Cuál de ellos es mejor para el trabajo científico? ¿Por qué?
Answer:
Ver explicación
Explanation:
El método científico se refiere al patrón establecido de resolución de un problema científico. Los siguientes son pasos importantes en el método científico;
Haz una observación.
formular preguntas relevantes.
elabore una hipótesis que pueda ser probada.
Diseña un experimento.
Prueba la hipótesis usando tu diseño experimental.
Teniendo en cuenta ambos escenarios, el último caso en el que estudiantes de diferentes capacidades trabajan juntos para resolver un problema refleja mejor el método científico porque pueden hacerse preguntas entre sí y llegar a hipótesis comprobables que pueden demostrarse como verdaderas o falsas mediante experimentos.
what is the state of matter that takes shape of a container???
Answer:
Liquid and gas is the matter that takes shape of a container
It can also be called fluid since fluid is distributed into liquid and gas
Explanation:
I hope that is enough for your answer, hope this will help
What is the molarity if 60.4 grams of hydrochloric acid was added to 505 mL of water?
M
H - 1.0079 g/mol
Cl- 35.453 g/mol
Answer:
3.29 M
Explanation:
Molarity refers to the molar concentration of a solution and it can be calculated using the formula below:
Molarity (M) = number of moles (n) ÷ volume (V)
According to this question, the mass of HCl was given to be 60.4 grams and the volume of water as 505 mL.
Using mole = mass/molar mass to convert mass of HCl to moles
Molar mass of HCl = 1.0079 + 35.453 = 36.4609g/mol
mole = 60.4g ÷ 36.4609g/mol
mole = 1.66mol
Volume of water = 505mL = 505/1000 = 0.505L
Molarity, M = 1.66 ÷ 0.505
Molarity of HCl solution = 3.29 M
Struggling on this problem.
Answer:
4Al + 3O2 ----> 2Al2O3
Explanation:
first blank 4
second blank 3
third blank 2
The diagram below represents changes in the types of plants growing in the same area during four different time periods. Different types of plants
have been labeled for each time period.oo
Hardwood trees
Softwood trees
Small plants and
shrubs
Grasses
kanmummimaturday
Time
This change in plant types over time is an example of
Answer:
ecological succession
Explanation:
Answer:
ecological succession
Explanation:
I did this before
Which of the following has kinetic energy?
Answer:
c ) a gymnast doing a cartwheel. ........
hope you like ☺️
Make a flow chart on uses of metals and non metals
you have to make flow chart with explanation
Answer:
Metals:
1. Metals are strong than non metals
2. Metals can be formed in wires, thin sheets, utensils and any other heavy meachinary for industries.
3. Metals are used for building construction and used in many other manufacturers
Non Metals:
1. Non metals are less stronger than metals.
2. Non metals can be used for manufacturing bottles, toys, bags, files etc.
3. Non metals are used in making of bottles, jars, chairs etc.
Thank you.....
Have a good day.....
El agua de una alberca requiere de 35.8 gramos de desinfectante (NaClO), por cada 1000 L de agua para mantenerse limpia. El día de hoy el cuidador de la alberca no fue a trabajar y dejó al velador encargado de la adición de desinfectante al agua, pero al velador se le olvidó la cantidad y le agregó 65 g.
Answer:
816L adicionales para mantener la concentración
Explanation:
Cuánta agua debe adicionar el cuidador para que se mantenga la concentración del desinfectante?
El desinfectante, NaClO, idealmente debe estar en una concentración de:
35.8g / 1000L = 0.0358g/L
Como el velador agregó 65g de desinfectante, la cantidad de agua necesaria es:
65g * (1L / 0.0358g) = 1816L de agua son necesarios
Asumiendo que el velador agregó 1000L, el cuidador debe agregar:
1816L - 1000L =
816L adicionales para mantener la concentraciónOn a graph showing distance versus time, a horizontal line represents an object that is
moving at a constant speed.
increasing its speed.
decreasing its speed.
not moving at all.
Answer:
the anwser is; B: increasing its speed
You are a NASCAR pit crew member. Your employer is leading the race with 20 laps to go. He just finished a pit stop and has 5.0 gallons of fuel in the tank. On the way out of the pits, he asks, "Am I going to have enough fuel to finish the race or am I going to have to make another pit stop?" You whip out your calculator and begin your calculations based on your knowledge of stoichiometry. Other information you know is: The car uses an average of 300.0 grams of O2 for each lap. The formula for fuel is C5H12. The fuel has a density of 700 g/gal. What do you tell the driver? (The density can be used as a conversion factor between grams and gallons)
Answer:
Since there are 3500 g of fuel left in the tank, and he needs only 1687.5 g to complete 20 laps, he has enough fuel to complete the race. I will tell the driver that he does not need to make another pit stop as he has enough fuel to complete the race.
Explanation:
Density = mass / volume
Density of fuel = 700 g/ 1 gal
Therefore, the mass of fuel in 1 gallon = 700 g
The driver has 5.0 gallons of fuel in the tank.
The mass of 5.0 gallons of fuel = 5 × 700 = 3500 g of fuel
Equation of the combustion of fuel, C₅H₁₂ is given below:
C₅H₁₂ + 8 O₂ ---> 6 H₂O + 5 CO₂
1 mole C₅H₁₂ requires 8 moles of O₂
1 mole of C₅H₁₂ has a mass = 72 g
8 moles of O₂ has a mass = 256 g
Therefore, 300 g of O₂ will require 300 × (72/256) g of C₅H₁₂ = 84.375 g of C₅H₁₂
84.375 g of fuel is used by the car per lap;
20 laps will require 20 × 84.375 g of fuel = 1687.5 g of fuel.
Since there are 3500 g of fuel left in the tank, and he needs only 1687.5 g to complete 20 laps, he has enough fuel to complete the race. I will tell the driver that he does not need to make another pit stop as he has enough fuel to complete the race.
What is the uses of seawater as a source of renewable energy?
Explanation:
Desalination of seawater is considered a renewable source of water, although reducing its dependence on fossil fuel energy is needed for it to be fully renewable.
Select the correct answer.
What does the empirical formula of a compound describe?
Ο Α. .
the type and number of atoms
OB.
the type and ratio of atoms
O C.
the number of atoms
OD
the type and mass of atoms
Reset
Next
Answer:
b
Explanation:
cause empirical formular is the elementary or the foundation for molecular formula and molecular formula depends on the empirical formula
23. What type of chemical reaction is: CH, + 0→ CO2 + H20
a. Combustion
b. Neutralization
C. Synthesis
d. Double Replacement
Answer:
combustion
Explanation:
bsnszisb idiej jeiieyv
Which of the following most likely happens when the volume of a gas increases the number of collisions of gas particles remains same. The number of collisions of gas particles increases. The pressure of the gas remains the same. The pressure of the gas decreases
Answer:
D. The pressure of the gas decreases!
Explanation:
According to Boyle's Law, there is an inverse relationship between the volume of a gas and its pressure!
So, if the volume of a gas increases, its pressure will decrease; the same thing will happen if the pressure of the gas increases -- the volume will decrease!
↑P↓V and ↓P↑V <---- this is what it would look like visually!!
Hope this helps! :)
When the volume of a gas increases then the pressure of the gas decreases.
What is ideal gas equation?Ideal gas equation is a hypothesis which tells about the behavior of gas in different conditions and it will be represented as:
PV = nRT
From this equation it is clear that pressure and volume are inversely proportional to each other:
P ∝ 1/V
Means if pressure increases ten volume decreases or if pressure decreases then volume increases.
Hence option (4) is correct.
To know about ideal gas equation, visit the below link:
https://brainly.com/question/25290815
Compare the following in the three states of matter
a) inter particle space
b)inter particle force of attraction
c)particle motion
Explanation:
Anything that occupies space and has mass is called matter.
(a) Inter particle space
Solids - Atoms of a solid substance are closely packed with each other due to which there is very less or no inter particle space.Liquids - Atoms of a liquid are little loosely packed due to which there is some inter particle space.Gases - Atoms of a gas are very loosely packed due to which there is large inter particle space.(b) Inter particle force of attraction
Solids - Atoms of a solid are attached to each other by strong force of attraction.Liquids - Atoms of a liquid have slightly less force of attraction as compared to a solid substance.Gases - Atoms of a gas have Vander waal forces. Hence, there is no inter particle force of attraction between atoms of a gas.(c) Particle motion
Solids - There is low or negligible particle motion between atoms of a solid.Liquids - There is high particle motion as compared to that present in a solid.Gases - There is very high particle motion as compared to solids and liquids.
Which statement explains why catalysts are important for living
organisms? *
Catalysts increase the amount of product formed from limited reactants.
Catalysts cause gases to be produced at a slower rate, so cells don't burst.
Catalysts are used up during chemical reactions, so organisms must constantly make
new ones.
Catalysts allow chemical reactions to occur at temperatures at which the organism
lives.
Answer:
Catalysts allow chemical reactions to occur at temperatures at which the organism lives.
Explanation:
Catalysts are molecules that speeden the rate of chemical reaction by lowering the activation energy of the reaction. In a living system, the catalyst are ENZYMES, which help to hasten up many biochemical reactions.
Another function of catalyst in living systems is that it allows chemical reactions to occur at temperatures at which the organism lives.
I
I-U-I
I-U-I
H
-U-I
H-C-HH-C-H
I
U-U-I
Ti
I-U-I
I. Witch direction does the electric field point at a position directly west of a positive charge
Answer:
The answer is North
Explanation:
The direction of the field is taken to be the direction of the force it would exert on a positive test charge.
Balance the equation above please
Answer:
Balanced Equation:-Al2(CO3)3. ---heat---> Al2O3 + 3 CO2
Answer:
everything can be found in the picture
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
chlorine is larger so the symbol is <
Explanation:
What happens to the intensity of light emitted from stars the further away the star is from us?
Answer: stars vary in their effective temperature and colour. A hot star radiates more energy per second per metre surface area than a cooler star. Does this then mean that a hot star is going to appear brighter to us than a cooler one? The answer to this actually depends on a few factors
Explanation: pa brainiest po
A presión de 3atm, 7L de un gas a temperatura constante experimenta un cambio ocupando un volumen de 0,5L ¿Cuál será la presión que ejerce? ayuda
Answer:
La presión que ejerce es 42 atm.
Explanation:
La ley de Boyle relaciona la presión y el volumen y dice que el volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión.
La ley de Boyle se expresa matemáticamente como:
P*V=k
Ahora es posible suponer que tienes un cierto volumen de gas V1 que se encuentra a una presión P1 al comienzo del experimento. Si varias el volumen de gas hasta un nuevo valor V2, entonces la presión cambiará a P2, y se cumplirá:
P1*V1= P2*V2
En este caso:
P1= 3 atmV1= 7 LP2= ?V2= 0.5 LReemplazando:
3 atm* 7 L= P2* 0.5 L
Resolviendo:
[tex]P2=\frac{3 atm*7 L}{0.5 L}[/tex]
P2= 42 atm
La presión que ejerce es 42 atm.
Answer:10.5
Explanation:
3atm x 7L / 0,5L = 10.5
Quando bajamos el volmen sube la presion y cuando bajamos la presion sube el volumen
303.8 liters volume will be occupied by 217.0 grams of methane gas at STP.
True
False
Answer:
False
Explanation:
It will occupy 271.7
The half-life of strontium-90 is about 29 years. How many half-lives have elapsed when 6.25% of
O 1
02
3
оо
The question is incomplete, the complete question is;
The half-life of strontium-90 is about 29 years. How many half-lives have elapsed when 6.25% of a strontium- 90 sample remains in the container?
Answer:
4 half lives
Explanation:
From;
N/No = (1/2)^t/t1/2
N= amount of strontium-90 present at time t
No= amount of strontium-90 originally present
t= time taken
t1/2 = half life of strontium-90
But N= 0.0625No
Hence;
0.0625No/No = (1/2)^t/29
0.0625 = (1/2)^t/29
(1/2)^4 = (1/2)^t/29
4 = t/29
t = 4 × 29
t= 116 years
Hence four half lives have elapsed
Which will boil faster distilled water or salt water and why?
Answer:
The distilled water will be boiled faster as it does not contain any non - volatile solute.
- The salty water contains different non - volatile salts in it.
- Due to the presence of these salts, its vapour pressure will be decreased and boiling point will be elevated.
- So, salty water will take more time to boil.
- On the other hand, distilled water does not have any such solute and due to this its vapour pressure will not be affected.
- Hence, it will boil fast than salty water.
¡A que clasificación corresponden las sustancias que están formadas por un mismo tipo de átomos, es homogénea y no puede descomponerse por medios químicos?
Answer:
Elementos.
Explicación:
Los elementos son las sustancias puras que están formadas por el mismo tipo de átomos, es homogéneo y no se puede descomponer por medios químicos. El elemento tiene el mismo tipo de átomos que son similares en tamaño y forma. Es un tipo de materia pura que tiene solo un tipo de átomos y no se puede descomponer más porque no está hecha de dos sustancias, es solo una sustancia, por eso no se puede descomponer por medios químicos.
What is the term for the repeating pattern in a crystalline structure?
a) Repeating pattern
b) Base pattern
c) Unit cell
d) Primitive pattern
Answer:
Because a crystalline solid consists of repeating patterns of its components in three dimensions (a crystal lattice), we can represent the entire crystal by drawing the structure of the smallest identical units that, when stacked together, form the crystal. This basic repeating unit is called a unit cell.Aug 12, 2020
_______ reach the surface first during an earthquake.
Rayleigh waves
P waves
Love waves
S waves
expand write down the binomial expansion of (1+2x)^7in ascending power of x ,simplifying all the coefficient. use the expansion theory to calculate the value of (0.98)^7 correct to four decimal places.
Answer:
0.86812566700000000000000
The binomial expansion of (1+2x)^7in ascending power of x is 0.868125.
What are binomial expansions?The algebraic expression (x + y)n can be expanded according to the binomial theorem, which represents it as a sum of terms using separate exponents of the variables x and y.
Each word in a binomial expansion has a coefficient, which is a numerical value. A binomial is a two-term algebraic expression. Examples of binomials include a + b, x - y, and more.
When a binomial is raised to exponents 2 and 3, we can use a set of algebraic identities to determine the expansion. As an illustration, (a + b)2 = a2 + 2ab + b2.
By regrouping and combining like phrases, we can arrange our final response in ascending powers of x by placing the lowest power of x first and the highest power of x last.
Therefore, the binomial expansion of (1+2x)^7in ascending power of x is 0.868125.
To learn more about binomial expansions, refer to the link:
https://brainly.com/question/29260188
#SPJ2